Help with Control Centre

Hi, I have i07.3 but the Control Centre is not showing up anywhere? Not in menu, not in settings and not when I swipe from bottom of screen? Can anyone please assist? Have I done something wrong? Do I need to reload i07?has anyone else had this problem?
Thanks

Go into settings, control center and see if it's been turned off. You have the ability to choose if you want to access it from within apps or the main page or neither.

Similar Messages

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

MSI P55A-G55 + i5 760 (problem with Control Centre)

Hi guys,
Anyone gotten the control centre to work?
My does not detect any CPU info at all.

Quote from: mortego on 04-October-10, 09:13:08
Hi guys,
Anyone gotten the control centre to work?
My does not detect any CPU info at all.
Not working for me as well.
Mortego does option "Restore on AC power loss" works for you? Try to switch off your PSU on back on it and power it after 1-2 seconds. I`m really interested in if only I have this problem as support says or not. In my country my reseller refused to accept RMA because they told me that it`s bios bug and I should wait for updates. It`s frustrating that it restart my PC rather than shutdown it completely.

Help with Controlling the HP E1411B multimeter with LabView

Hi -
I'm using LabView 7.1, and trying to control the HP E1411B multimeter in a Textronix VX1410 frame, using a VXI-MXI-2 interface. I've read that this is a register based device, which means what? I can't control it using the VISA method in LabView? I've been successful in this with other devices, so I'm guessing it can't be done because it doesn't work. I also downloaded both the drivers for this device from the driver database, and neither work. I can't seem to figure out to nake them work either. Can anyone help? I just want to use the MM to make simple measurements and display them in LabView. If I wanted to create my own driver, what would be the best way to communicate with it? Thanks.
Charlie

Sir,
I want to make automatic test setup for testing accelerometer. My resources are Test station PC with windows 2000, Agilent E1401B High power mainframe with slot 0 controller, Slot 0 controller is NI VXI-MXI-2 controller, shaker etc. MXI-2 bus begins at PCI at the PC and goes to VXI backplane. Agilent E1401B cage have Agilent E1411B 51/2 Multimeter (in slot 3), Etec Test Head Support Module (slot 2), Etec Digital stimulus response module, ETEC test head I/O panel etc. we have old version labview-2009. using labview i want to control my test whole setup.
Procedure for test setup is that i need to give power supply to shaker. Also i have to give input signal of 1kHz to shaker for vibration. Accelerometer will be mounted on shaker. Accelerometer output voltage has to be measured with agilent DMM E1411B in VXI cage.
I have installed NI-VISA n NI-VXI driver and i was trying to program it using visa VIs in LABVIEW, but couldn't succeed.
First, i am trying to make a simple program which can read resistance and voltage from HP E1411B DMM. There is difficulties in using VISA Out and VISA In VI. to measure DC voltage value from DMM, how should i give command to DMM using VISA out, because input to VISA out is numerial value so how can i give command to DMM. VISA In has only input offset and address space, so how will i know that which offset setting will show voltage value.

Help with controlling Bank changes on Yamaha S90ES from Logic

Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

Yeah, I'm a bit confused too. Assuming your keyboard is sending bank/program changes in the same format is receiving them, Logic will just record your data, and play it back as the keyboard sent it.
Logic is ignoring bank changes sent from my Korg Triton.
So, when recording into a region, you only get program changes, and not bank changes in your recorded data?
However, Logic is sending bank changes to the Triton perfectly.
From playing back a sequence recorded from program changes generated by the keyboard, or using Logic's bank/program change parameters in the instrument parameters?
If I use my keyboard to set the instrument, Logic sets the program,
but the bank is ignored.
I don't understand what you mean by "Logic sets the program".
n the event list, the incoming data looks as standard as could be:
my keyboard is sending a bank MSB and LSB, via events 0 and 32,
followed by a program change,
And you are saying that if you play that back, the keyboard doesn't change sounds correctly?
followed by a sysex "66/48" which I assume identifies the source
of the message (the Korg).
You can't assume anything - it could be anything. It could be a sysex patch dump of the patch, or it could be some mode setting. You'd need to read the keyboard manual to find out what it is.
So the question is: how do I get Logic to PAY ATTENTION to the
darn bank change being sent by my keyboard?
I really don't understand what you mean by "PAY ATTENTION". If you squirt MIDI data at Logic, Logic will record it into a region, and then play it back, as would all sequencers. What should Logic do differently?

Need help with control system that reduces a flat output signal every time a certain input exceeds given value

I'm having difficulty setting up a closed loop control system that reduces one of my voltage outputs (connected to a high voltage system) by 30% every time a measured voltage exceeds a certain threshold value. I'm using a USB 6229 DAQ. I've been trying to create a waveform that looks like a DC signal, but the only waveforms that I can seem to manipulate while my VI is running are the stock waveform types. Also, I've tried to use a formula node or conditional structure to update the output value every time the measured voltage exceeds a given value, but everything I do reinitializes the output value every time it runs or won't store the previous signal value. I'm using LabVIEW 8.6 and don't have the PID or similar express VI's. I've attached the mess I've got working right now. Can anyone help? I'm really stuck!
Thanks!
Attachments:
HiV step down.vi ‏40 KB
output control.vi ‏100 KB

I'm sorry it's such a mess; I'm still pretty new at this. These are both little driver programs for a larger overall control program.
Output control is meant to send a flat signal to the DAQ whose value can be manipulated while the VI is running. I have the second activated segment merely to check the values being output. I didn't realize I attached a version with a meaningless control...I had a control where the user would put in the stating voltage (the high voltage source has a 1V-100V setting for external control). I've attached this slightly different but equally dysfunctional version. Ideally, I would have liked something like the analog signal generator vi to come with an input wiring for offset on the DC signal. Most of the code was diabled because it is copied from an example; it is largely rubbish. I initially used the DAQ Assistant, but when things weren't working out I switched to putting in each step manually to try to troubleshoot.
As far as HiV step down is concerned, I've tried something different with a nested case structure (if that's the right terminology?), and I've attached that file. I think this problem has been solved, but you never know!
Attachments:
output control slightly different.vi ‏100 KB
HiV step down w case structures.vi ‏44 KB

Help with controlling audio

I have a horizontal slider which has left and right buttons to control the movement. I want to have audio narration on each of the clicks so for example. The user is on slide 1, clicks the right button to slide 2 and the audio narration for slide 2 starts, then user clicks the left button to go back to slide 1 and the audio narration for that slide starts etc etc. I currently have a total of 5 slides.
So far this is the code I have:
document.compositionReady:
sym.setVariable("audioplay", "0"); // sets the initial value
Right_btn.click:
sym.getComposition().getStage().getSymbol("SceneHolderSymbol").play();
var audioplay= sym.getVariable("audioplay");
    if (audioplay) {
        sym.setVariable("audioplay", "1");
        // insert your code that you want to do when it's clicked
            sym.$("AF_Slide_21")[0].pause();
            sym.$("AF_Slide_22")[0].play();
else if (audioplay) {
        sym.setVariable("audioplay", "2");
        // insert your code that you want to do when it's clicked
            sym.$("AF_Slide_22")[0].pause();
            sym.$("AF_Slide_23")[0].play();
else if (audioplay) {
        sym.setVariable("audioplay", "3");
        // insert your code that you want to do when it's clicked
            sym.$("AF_Slide_23")[0].pause();
            sym.$("AF_Slide_24")[0].play();
    else if (audioplay) {
        sym.setVariable("audioplay", "4");
        // insert your code that you want to do when it's clicked
            sym.$("AF_Slide_24")[0].pause();
            sym.$("AF_Slide_25")[0].play();
PlayBtn.click: - This is the inital play button which plays the audio for the first page.
sym.$("PlayBtn").hide();
sym.$("AF_Slide_21")[0].play();
I don't know if my approach is completely wrong but any help would be much appreciated.
Thanks,
Phil

Yes, as hemanth mentioned, all of your conditionals are testing for the same condition - is the audioplay variable defined. In your code, that would always be true.
Instead, I think you want to test what the value of audioplay is for each conditional, and then do the appropriate thing.
hth,
Joe

HT5858 Bug with control centre? - only accessible from lock screen

I cannot access Control Center from my home screens or within apps, only from the Lock Screen - very annoying if I want to switch my music output for example or use the torch.
My settings are on for both access from Lock Screen and Access from within Apps.
Is this a bug or I am doing something wrong?

Hello Adrian Biffen,
After reviewing your post, it sounds like you can't access Control Center from inside apps. I would recommend that you read this article, it may be able to help the issue.
Use Control Center on your iPhone, iPad, and iPod touch - Apple Support
If you're using an app that uses similar swipe gestures, like Maps or games, you might have to swipe up twice: once to reveal the handle for Control Center, and a second time to reveal Control Center.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Help with controlling a flash video in director

I have imported a flash file into my director movie and would like a replay button but can not
find the correct lingo. The flash file is called equation. Any help appreciated!! thank you

Solved using the following method:
spr = sprite("equation");
function mouseUp() {
spr.rewind();}
Thank you for all your help pretty easy in the end!

Disappointed with iOS 7 control centre

I like everyone else was expecting a lot out of iOS 7. Definitely apple lived up with half of my expectation by adding new designs, new icons etc etc. but one thing that really got me disheartened was the control centre. I mean its cool that they added some toggles and shortcuts, but theres so much more that could have been done. Data toggle, 3g toggle, location toggle, hotspot toggle they are essential for almost all of us. Its really tedious to go back to the entire settings procedure every time we need to turn them on or off. These options are already present in other platforms since ages. And apple omitted them despite of having the space and opportunity to add them. And another vital omission was the Facebook and Twitter quick post widget. It was a really helpful part of the iOS 6. & i feel it should have been placed in the control centre. So i hope apple reads my post and takes these things into consideration for future development of iOS.

Apple is not here
This is a user to user forum
Try apple.com/feedback to send to Apple
Allan

AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437

I can't open the control centre with a Griffin Survivor Case on my iPhone 5.

The title says it all really. The plastic of the case ends really close to the screen and there is an inbuilt screen protector. This means I can't register touch on the bottom edge of the screen, which is apparently where you have to swipe to open the control centre. I have no problems opening the notifications, swiping down from the top.
Does anyone alse have this problem, which the same or different cases? I know there are similar issues with Otterbox cases too.
I hope Apple will notice the problem and make a fix soon. It should be simple enough - just move the swipe spot up a little like the one at the top of the screen.

I have the OtterBox Armor case which has a similar design and thus problem. After much practice I can now open CC with about 3 or 4 attempts. Much better than when I started and thought it just couldn't be done. I really have to start at the exact middle of the bottom of where the screen meets the case.

I am having problem with my notifications bar and control centre bar. It doesn't work with sliding my fingers on the screen and when I restart the phone it works properly but again after few days the problem persist? My phone is an iphone6 8.1.3

notification bar and control centre not working by sliding on the screen and when u restart it works fine for 4-5 days then again the problem persists

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Control centre won't work! Please help!!

Hey guys, I need help I have a problem where my control centre won't come up on the home screen or apps only on the lock screen. Please help!! Also my device is a iphone 5s n and it is iOS 8.1

Hey there iThings,
Since the Control Center is not opening anywhere but on the Lock Screen, I would start by toggling the option to Access on Lock Screen off first:
Use Control Center on your iPhone, iPad, and iPod touch - Apple Support
Settings > Control Center.
Then quit all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Take care,
Sterling

Help with Control Centre

Similar Messages

Maybe you are looking for