Help with CSS configuration issue

My question is about configuring the CSS 11151 for server load balancing including some provision for communication with each of the servers (services), independent of the load balancing method. Here are the details.
We are building a test IDC for dedicated web hosting. We will use one Cisco CSS 11151 and several servers (as well as a firewall, etc). Web requests will be processed by the CSS using round robin. However, in addition to the need for servicing web requests, there are situations in which the web owner or the IDC administrator needs to communicate with a specific server.
That need exists for doing administrative functions like troubleshooting. It also exists for the web owner to deliver content and configure the web server. I understand that there are several different ways to configure the CSS to support this kind of access (see below) but I don't know what the trade-offs are, nor do I know what the commons practices are. So I am not sure which configuration(s) to use. Any experience to share? What is being done in the real world?
Configuration Alternatives I Am Aware Of:
1) In the (web) owner's rule add an additional individual pass-through VIP for each service. That VIP (or its NATed IP) is exposed only to the web owner.
2) Use an additional content rule for each service (L5 content rule) so that particular types of requests, e.g. FTP, are directed to particular servers.

Here is another way to hack this where you can use your domain name and port number to differentiate which server where you would like to connect.
If you are limited on public IP addresses and need to administrate your back-end servers remotely, then you can create a layer4 content rule for each single server you would like to access.
This means you can create a content rule using the same IP address as your main load balancing VIP, and then you can assign a different port number each one of these new rules. Per rule, the one service on the backend can map to whichever port you like, like 23.
So the end result of this method can be telnetting to www.yourdomain.com on port 1010, and having that request map to port 23 on your backend servers.
Hope that helps!
Cheers,
Perry.

Similar Messages

Help with CSS browser issue... please!

I posted this issue on the Wordpress forums and am not having
much luck. Since it seems to be a CSS issue, I thought I should
post it here and see if any of you can help me out.
I am having a problem with browser compatibility on my
Wordpress powered blog. I built the template in Dreamweaver and
then spliced it up into the individual blog files.
The blog is at
http://www.babybumps.net/blog
The main problem is that in Mozilla and Safari, the
background wrapper is dropping out right before the navigation bar
(the background disappears). Since this part is still in the header
file, I'm not sure what is going wrong.
I am attaching the code for the index and header. If you need
to see any of the other code, let me know!
Thanks in advance for any help!

ArtsyAndi wrote:
> I posted this issue on the Wordpress forums and am not
having much luck. Since
> it seems to be a CSS issue, I thought I should post it
here and see if any of
> you can help me out.
>
> I am having a problem with browser compatibility on my
Wordpress powered blog.
> I built the template in Dreamweaver and then spliced it
up into the individual
> blog files.
>
> The blog is at
http://www.babybumps.net/blog
>
Hi,
try replacing this for yours.......
#content-wrap {
padding: 0pt;
background: #fff url(images/content-wrap.jpg) repeat-x;
width: 805px;
margin-left: auto;
border-top-style: none;
margin-right: auto;
HTH
chin chin
Sinclair

New to Oracle - could really use help with memory configuration

I'm new to Oracle and am assuming the support role on a system that is using Oracle 8.1.7 as the database server and need help with memory configuration.
The server is being used with FileNet and we're having issues while trying to purge logs (purge never completes) and the disk drive activity LED is on almost solid. My guess is is that it's not using enough/doesn't have enough memory therefore constantly reading off the disk and going too slow to finish the purge between nightly backups in which the database service is stopped.
The server is running on Windows 2000 Server SP4, has 1G of RAM and is dual-Xeon processor.
Any help or starting point references would be greatly appreciated.

Hi ...
You can use a StatsPack for guess the best distribution memory with your DB needs.
See metalink Note:228913.1
Regards

Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
Thanks much.
Emile

Choose Force Quit from the Apple menu and close Mail from there.
(103661)

Need a bit of help with css and fullscreen

I am currently doing a javaFX application for my university project, I have it everything nearly finished, but need to finish the css component to make the application "prettier" (I am not very good on graphic design to be honest). So if i could get a bit of help on this little issue I'd be very grateful.
is there any way to make fullscreen (and if possible resizing window) to instead rearranging everything to actually do a fullscreen (like the games) and everything "grows accordingly (even though in games what it usually does is to change the screen resolution, is that possible to reproduce with javaFX?) also how to remove the message and the effect on click the "esc" key to exit the fullscreen mode?
i know that removing the focus effect on an element is with the following (if a button)
.button:focused{
     -fx-background-insets: 0;
}but,is there any way to remove the effect on anything focused (TextField, Combo Box, ...)? (tried with a .textfield:focused but it did not work)
also i wanted to produce the focused effect by this way but it didn't work, how should i do it? (in fact even if i try to put this line on the button:focused, the focused effect gets removed from there, because of the insets line)
#highlight{
     -fx-background-insets: 2;
     -fx-background-color: yellow;
public class controller extends StackPane implements Initializable{
     public void highlight(){
          this.getStyleClass().add("highlight");
and last thing (for the moment) the .button seems to work for all the buttons, but trying another thing like .gridpane or .textfield or .scrollpane does not seem to work, is there any way to make it work or i should add "id" to all the elements and use the # instead?

i wrote all them in the same thread becsause there were a total of 4 (and could had been more) separated by ----
should i leave it how it is or open now 4 threads for each question?

Help with CSS & Firefox

Could anyone help with the query below. I posted this last
friday but never
got a reply. The original message that i posted is also
below. It might be
easier to read from the bottom up.
Thanks
James
----------------------------------->
Thanks for your reply.
I've changed my code as you suggested & now the content
div is coming about
half way down the page- so were getting somewhere. There are
floated
elements so I have added the 'clearthefloats' div. There are
no absolutely
positioned elements, but I tried making the content div
position:relative
anyway but it had no effect.
I also added some text into the 'clearthefloats' div so i
could see where it
was on the page & it is halfway down the page itself,
even though it is
below the other elements in the page.
Thanks,
James
"typist" <[email protected]> wrote in
message
news:[email protected]...
> How are you positioning what is inside your contentdiv?
Are the elements
> floated?
> IE will surround your floated elements, Firefox will not
unless you put a
> non-floated element after the floated ones, and clear
it.
>
> <div class="clearthefloats"> </div> (I just put a comment in to
> hold
> the div)
>
> div.clearthefloats {clear:both:} (look up "Stylin' with
CSS" by Charles
> Wyke-Smith for more)
>
> But if you are putting absolutely positioned elements
into your div, then
> you
> need to make your content div position:relative. This
will make the
> elements
> position in the context of the content div instead of
the body.
>
ORIGINAL MESSAGE:
>>Hi,
>>I've got a page with css controlled div's. One of
them ('content') not
>>very
>>surprisingly contains all the page elements. For some
reason though, when
>>viewed in firefox the content div does not wrap round
it's contents (the
>>bg
>>of the page has a light purple color and the content
div is white). There
>>is
>>just a thin strip of white at the top where it
begins. It looks fine in
>>ie.
>>Here's the code for the content div:
>>#content {width:760px;
>> margin:0px auto;
>> background-image:url(images/logostrip.jpg);
>> background-position:top;
>> background-repeat:no-repeat;
>> background-color:#FFFFFF;
>> padding-bottom:10px }
>>I have tried defining the height, which works in
firefox, but then in ie
>>there is about 100px space at the bottom of the
content div. For some
>>reason
>>1000px in firefox is shorter than 1000px in ie???
>>Is there anything i am missing?
>>Thanks,
>>James

Yes I have tried setting the height. It should wrap round the
whole page
content not just the graphic. I tried setting the height till
it looked
right in firefox but then in ie there was about 150px extra
at the bottom.
(this was on another page which is a lot longer). Plus if i
set the height
to be right on the homepage, the other pages will be wrong. I
would have to
use seperate style sheets, or give the div's different id's.
Surely there is a way to get the div that all the contents
are in, to simply
wrap round them.
Thanks
"Nadia : **AdobeCommunityExpert**"
<[email protected]> wrote
in message news:[email protected]...
> Setting a height of 306px on that container, revealed
the whole graphic as
> per the visual in IE.
> I did this using the FFox edit CSS tool - but it should
work.
>
> --
> Nadia
> Adobe� Community Expert : Dreamweaver
> --------------------------------------------
>
http://www.csstemplates.com.au
- CSS Templates | Free Templates
> --------------------------------------------
>
http://www.perrelink.com.au
- Web Dev
>
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
>
http://www.adobe.com/devnet/dreamweaver/css.html
> -------------------------------------------------
> "Nadia : **AdobeCommunityExpert**"
<[email protected]>
> wrote in message
news:[email protected]...
>> Is that the graphics in the #container?
>> Have you tried setting a height on that container to
the height of your
>> header image?
>>
>> --
>> Nadia
>> Adobe� Community Expert : Dreamweaver
>> --------------------------------------------
>>
http://www.csstemplates.com.au
- CSS Templates | Free Templates
>> --------------------------------------------
>>
http://www.perrelink.com.au
- Web Dev
>>
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
>>
http://www.adobe.com/devnet/dreamweaver/css.html
>> -------------------------------------------------
>> "James D" <[email protected]> wrote
in message
>> news:[email protected]...
>>> Ok,
>>>
>>> please visit
http://www.beta-design.co.uk/ivesys_home_white/home.html
to
>>> see
>>> the page.
>>>
>>> If you view it in Firefox you will see a thin
white strip at the top.
>>> This
>>> should wrap round the page contents. It works in
IE. If you cannot
>>> access
>>> the css which is in an external file then please
repost and i will paste
>>> it
>>> all into a reply.
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>>
>>> "Osgood" <[email protected]>
wrote in message
>>> news:[email protected]...
>>>> James D wrote:
>>>>
>>>>> Could anyone help with the query below.
I posted this last friday but
>>>>> never
>>>>> got a reply. The original message that i
posted is also below. It
>>>>> might be
>>>>> easier to read from the bottom up.
>>>>
>>>> Its better to link to the complete page
rather than just supplying half
>>>> the story. If you do that its going to be
easier to identify the issue.
>>>> With the little information you have
supplied its not going to be
>>>> possible.
>>>>
>>>
>>>
>>
>>
>
>

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

Help with production jvm issues at customer site

Following is a brief overview of two production issues experienced by an Oracle customer. Customer is currently running 32 bit Java 1.5_20 on Solaris 64 bit OS.
1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. During this time when continuous full GC is going on, we have seen the TCP connections and active JDBC connections shoot up and also lots of stuck threads. This error occurs during peak hours.
This is the output just before OOM. Just to be clear, this line is printed as last line of Full GC which meant that OOM happened right after Full GC:
[PSYoungGen: 111616K->82323K(172544K)] [PSOldGen: 1865727K->1865727K(1865728K)] 1977343K->1948051K(2038272K) [PSPermGen: 209111K->209061K(210944K)] GC time is exceeding GCTimeLimit of 98%, 13.3644395 secs]
2)     OOM swap space- SR: #3-1724941721 – From time to time, we get Exception in thread "CompilerThread0" java.lang.OutOfMemoryError: requested 32756 bytes for ChunkPool::allocate. Out of swap space?’ error in our production. Mostly this error occurs during off hours or off-peak hours. When this happen, there is plenty of heap and perm memory available which indicates that this is a native memory error. We already put two workarounds suggested by Oracle i.e. -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m but still running into this problem.
What we are looking for:
1)     Recommendations on tuning our config parameters -
These are some recommendations we discussed internally. Please validate these recommendations and provide us the recommended values. We would also welcome any new recommendation on updating other parameters if that will help with our issues.
•     Change Xmx to 2048m and MaxPermSize to 512m
•     Specify ratio of young generation to old generation (-XX:NewRatio), and possibly survivor spaces.
•     Use Concurrent old generation collector (-XX:+UseConcMarkSweepGC), with a compatible parallel young generation collector (-XX:+UseParNewGC)
Our current config settings are:
JAVA Memory arguments: -Did=chaserels-cm21 -Xms1024m -Xmx2048m -XX:MaxPermSize=1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m -verbose:gc -Dcom.sun.management.jmxremote=true -Dcom.sun.management.jmxremote.port=1641 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.awt.headless=true -Dfile.encoding=ISO646-US
In a subset of servers, the settings are same as above but for MaxPermSIze, which is set to -XX:MaxPermSize=512m
2)     Diagnostic help in how to further narrow down to the problem and what tool to use to gather heap dumps
We have tried to take heap dump using jmap on our production servers when OOM occurs due to heap but most of the time, we run into an exception (attached - which is probably an unresolved jvm bug). While we researched some alternatives to jmap for taking heap dumps, most of these require changing the start-up scripts or installing the tool on production system which may have a performance overhead. What we want is a least intrusive tool which could provide us heap dumps/snapshots without much overhead and could be preferably used remotely. If there are other ways of collecting data than heap dump, we could also use them.
Let me know if you have any questions or need any data.
Thanks for your help.
Error from heap dump :
Exception in thread "main" sun.jvm.hotspot.debugger.UnalignedAddressException: Trying to read at address: 0xfec080a7 with alignment: 4
at sun.jvm.hotspot.debugger.DebuggerUtilities.checkAlignment(DebuggerUtilities.java:40)
at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readCInteger(ProcDebuggerLocal.java:309)
at sun.jvm.hotspot.debugger.DebuggerBase.readAddressValue(DebuggerBase.java:425)
at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readOopHandle(ProcDebuggerLocal.java:326)
at sun.jvm.hotspot.debugger.proc.ProcAddress.getOopHandleAt(ProcAddress.java:96)
at sun.jvm.hotspot.oops.Oop.getKlassForOopHandle(Oop.java:198)
at sun.jvm.hotspot.oops.ObjectHeap.newOop(ObjectHeap.java:346)
at sun.jvm.hotspot.runtime.JavaThread.getThreadObj(JavaThread.java:333)
at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.writeJavaThreads(AbstractHeapGraphWriter.java:113)
at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.write(AbstractHeapGraphWriter.java:98)
at sun.jvm.hotspot.utilities.HeapHprofBinWriter.write(HeapHprofBinWriter.java:399)
at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:133)
at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:143)
at sun.jvm.hotspot.tools.JMap.run(JMap.java:71)
at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
at sun.jvm.hotspot.tools.JMap.main(JMap.java:126)

1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. Which would be exactly what would happen if there were many objects which were not eligible for collection.
Causes would be either a bug (something not releasing something it should) or because the server is overloaded.
If there were no code changes it could still be a bug that has now only become apparent due to changes in usage patterns.
If that is the case then such bugs can usually be made more apparent by reducing the maximum heap. Doing that will cause it to occur faster.

Can you help with my connection issues

I cannot connect to my Contribute CS3 even though my server is fine. Does anyone have any suggestions? I spent the last hour on the phone with my server company and they tried but failed to help me connect.

Please try the following steps.
Delete the existing connection from Edit -> My connection .
Create a new connection and when you Click the Advanced button next to the "How do you connect to your web server?" field in the Connection Information dialog box.
Try toggling the Passive Mode check box (if it is unchecked, check it; if it is checked, uncheck it).
If you are behind a firewall, check the Use firewall/proxy settings when connecting check box and click the Firewall Settings or Proxy Settings button to enter firewall information. Ask your local network administrator for help with these settings.
Once done with the new connection you would be able to connect to your website. For more information on connection issues you may use this link http://helpx.adobe.com/contribute/kb/troubleshoot-connection-problems-contribute.html
Regards,
Rajeev

Help with a CS2 issue

hey there. I have a strange issue going on with my Photoshop CS2. When I open the program and begin to work with my image the program closes without any warning. I have never had any issues before and have done high quality graphics before with it. My current project is a poster for work that is 20 x 30. I tried at 300 and 200 dpi. When I start anything after the original layer it just closes. Is is because of the size? DPI? know the file size is a little larger than normal but to crash right off seemed kind of strange. I included my computer info so I hope that helps and if this has been mentioned before - newbie I apologize.
Brent
ps I haven't used the programs help in a long time.For some reason it isn't working. Is there any issues with the help option not working properly?
(I pulled this from the system info so I included what I thought would help - with some things yeah could use a new computer no that old but could be better :-)
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 1
System architecture: AMD CPU Family:6, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP
Physical processor count: 1
Processor speed: 2079 MHz
Built-in memory: 1023 MB
Free memory: 459 MB
Memory available to Photoshop: 908 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: [deleted by forum host]
Startup, 105.4G, 49.9G free
1 Gig of RAM

First of all, you should update your OS to service Pack 2 and then apply the other updates that have come out since then.
Try resetting your preferences. There are several ways to do this; the simplest is: Immediately after clicking to open Photoshop, press and hold Ctrl+Alt+Shift; if you get a dialog about your preferences, tell it to delete or clear them, after which Photoshop will open. If you don't get the dialog, you weren't fast enough. Some people find that it helps to press and hold Ctrl+Shift down before clicking, then immediately pressing Alt in addition.
If you have reset your preferences and still have the problem, you can try doing a repair install; if that doesn't work, try uninstalling and reinstalling (which doesn't take long for PSCS2 and is no big deal).
Let us know what happens.

Need help with 6300 configuration settings

I can't get sms, email or web to work on my lovely new 6300 phone (an xmas present from my daughter) :-(
I travel between England and France and have an Orange sim card for England and an SFR card and contract in France (Orange doesnt work in the mountains).
I managed to text when in England with the orange card. On arriving in France I found the phone was locked to Orange (first headache, given that I live in the country, over 50 miles from any Nokia dealer). I got the phone unlocked, but SMS etc were still not working and local mobile outlets hadnt a clue. So I'm on my own.
Rummaging around this site I realised I probably needed to additional settings, and downloaded these.
Now for the real nightmare: how the hell to set these configuration settings. I seem to be going round in circles. Is there anybody out there who could help me make some sense of the following settings???!!!
Although helpful, this site is not good at explaining the significance of the following (and whats more I feel they should probably be listed in the reverse order?)
- default config setting
- preferred access point
- personal config setting
DEFAULT CONFIG SETTING
I have a choice of
- orange (inherited with branded phone and presumably needed when back in the UK?)
- personal config
- SFR MMS (downloaded by me from Nokia)
- Wanadoo (downloaded by me from Nokia)
Ive chosen personal config (see below)
ACTIVATE DEFAULT IN ALL APPS
I have said no ??
PREFERRED ACCESS POINT
Ive created one called 'Fra access point' (see next) so as to have alternative to all the orange ones,
PERSONAL CONFIG SETTING
I've made three: FRA access point, FRA mailbox and Fra web
The access point has data bearer as Packet data (dont ask me what this means!) and I made up my own user name and password
Well, there you are. I would at least like to have the sms working (I suspect the email may be another hurdle as my pop and sms servers are different).
I do hope someone can help me

I was disappointed by the deafening silence which followed my cry for help - perhaps a bit too meaty for a Friday afternoon?
Anyhow, amazingly, after a loooong and expensive phone call to SFR (Vodaphone) the problem has been resolved (sort of).
I had been fiddling around with the configurations under Settings. It turned out there are MORE settings under Message settings and these included the need to specify a number for the Message Centre. (Nowhere on the SFR site is this number given, plus their link for downloading configurations is not working...)
Be warned, I might be back in a week or two when I have more energy to tackle email.

NEED HELP WITH WORKFLOW CONFIGURATION

I need help with 3 situations below. Please help me with these. How do I configure these. I also haveto provide specs to the Abaper. What exactly do I need to include in the specs. I anyone has the specs similar to these please send me over. Also tell me what I need to do to get these requirements fulfilled.
1) Description:
This is a workflow requirement to serve as a reminder of upcoming investment
maturities.
Requirements Details:
Create a workflow to serve as a reminder of upcoming investment maturities.
Donor System Processing Narrative:
Read the maturity dates on investments.
Target System Processing Narrative:
Send a notice to the parties that an investment will be maturing soon.
2) Description:
Implement workflow to route invoice receipts using a one time vendor for management
review and posting
Desired Functionality:
If a one time vendor is entered by the AP Voucher Clerk the invoice will be automatically
parked by the program and a workflow notification triggered to the Accounting
Supervisor and Accounting Manager (backup). The Accounting Supervisor will review
the parked document and imaged copy of the actual invoice and post the parked
document.
3) Description:
An approval workflow is needed for credit memos posted to SAP customer accounts.
Desired Functionality:
The Cash Journal Clerk will post a credit memo to the customer account using transaction
FV75 Park Customer Invoice. This transaction will automatically trigger a workflow to
the Accounting Manager for approval and then to the CFO who will approve and post the
parked document. (In order for this transaction to automatically trigger what configuration needs to be done).

Bob;
You can borrow the example code that ships with both NI-DAQ (in case you are doing NI-DAQ function calls) and Labview. The best examples to start with are the ones that have the prefix STC.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Help with css 3 column layout with background

So I'm really not much of a web designer and usually deal in
print but a friend wanted help with her site so I'm taking a crash
course in css. so I was wondering if anyone a little more web savvy
than I can spot why my sites background Is sliding around.
this is the site as it
stands
this is the
main css i found a site to generate the codes to get around browser
specific glitches
what
I see in Safari
what
i see in firefox
what
background should look like
any help would be greatly appreciated thanks

Peter Llamas posted in macromedia.dreamweaver:
> So I'm really not much of a web designer and usually
deal in print
> but a friend wanted help with her site so I'm taking a
crash
> course in css. so I was wondering if anyone a little
more web
> savvy than I can spot why my sites background Is sliding
around.
>
http://whiskeylemonade.x10hosting.com
I have no idea what you mean by "sliding around", but could
it have
something to do with your missing old_break.css file?
http://whiskeylemonade.x10hosting.com/css/old_break.css
HTTP/1.x 404 Not Found
Mark A. Boyd
Keep-On-Learnin' :)

Help with some iPhone issues please

Ok, I am starting to have some problems with my iPhone 3G, and would really appreciate any help with these issues.. here is what is happening
1) iPhone Vibrate is pretty much broken, turns off and on vibrate by itself.. and now is vibrating very softly.
2) iPhone wont sync my Music anymore, I have 3 playlists that I use on my iPhone, and none of them will update. When I sync my iPhone, everything syncs but the music.
3) iPhone sometimes completely freezes and i cant get it to go to the locksreen or power off, so I have to do a hard restart.

Hi Matt,
Try restoring the iPhone, this article: http://support.apple.com/kb/HT1414 will walk you through the process.
If the vibrate and unlock issues persists, the iPhone may need hardware repair. Just make a reservation to have a Genius, at a local Apple retail store, take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
Message was edited by: Jason L

Need help with expression builder issue

Hi all
I'm hoping someone can help with an issue I'm having. I'm creating a database for a manufacturing joinery. For 1 of my forms, Ive to create a despatch form which includes order details along with customer details. Some customers can have contracts in which
they get a fixed price on certain item. This is where the problem lies.
For my customers table, I have a field called "On contract" which is a Yes/No field. I've created a query to attempt to make this form. I'm having trouble with adding a total column at the end of this query. Quantity,Unit Price, Contract Price
are also in the query. I've been trying to build an expression to say like;
iif [on contract] = "Yes", [Quantity] * [Contract Price]
iif [on contract] = "no", [Quantity] * [Unit Price]
It obviously wont work, what am I doing wrong?
Thanks in advance

Hi,
Assuming you are using the database is SQL Server:
SELECT [CustomerID]
,[Quantity]
,[Unit Price]
,[Contract Price]
,[Total] = CASE WHEN [On Contract] = 'Yes' THEN [Quantity] * [Contract Price]
WHEN [On Contract] = 'No' THEN [Quantity] * [Unit Price] END
FROM [Customers]
Modify the SQL to suit your need.
Hope this helps.
~J.

Help with CSS configuration issue

Similar Messages

Maybe you are looking for