Help with custom code in ZTIGather.wsf

To pick up WMI "version" info to deal with Lenovo computer models I found this code and integrated it by adding these lines to ZTIGather.wsf:
ABout line 542:
oEnvironment.Item("LenovoModel") = sLenovoModel
About line 383
       ' Get the Lenovo Model Version from the Win32_ComputerSystemProduct class
       ' Siva Mulpuru | 10:30 PM Monday, February 14, 2011
       Set objResults = objWMI.ExecQuery("select * from Win32_ComputerSystemProduct")
       For Each objInstance In objResults
           sLenovoModel = objInstance.Version
       Next
       if sLenovoModel = "" then
           oLogging.CreateEntry "Unable to determine LenovoModel tag via WMI.", LogTypeInfo
       End if
The code works as intended, and appears to present no problems when imaging from a USB stick, however, when running a standalone image media or trying to launch the wizard from LiteTouch.wsf, the wizard starts and hangs on the initialization step.
If I remove the additional code from ZTIgather.wsf the issue disappears. Looking at the code, does anyone have any ideas?
sd

Similar Messages

Generating a blank document with custom code

Is there a way I can generate a blank document with custom code in it? I have been looking at several methods of doing this but so far I have been unsuccessful. So any assistance here would be appreciated. This is for an extension I am currently working on.
Many thanks

This is a public forum; please do not post your email address or other private data (by sending the forum notification with all its headers back to the forum).

Can you help with the code to publish Flash to my own domain.

Thank you for your help, I publish the my site to my own domain, I do not use .Mac, I tested your code and ity works well on .Mac, can you help with the code to publish to my own domain.
Thank you again

You appear to have just collected a variety of code snippets and thrown them together, including a section of AS2 code ( gage.onRelease = function() {... )
The suggestion I offered yesterday still stands. You should find a tutorial regarding AS3 and the atan2 function. Beyond that, what you show suggests this is a school assignment. You should seek help from your fellow students and instructor if that is the case.

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

Need help with WMI code that will send output to db

'm new to WMI code writing, so I need some help with writing code that we can store on our server. I want this code to run when a user logs into their computer
and talks to our server. I also want the code to:
* check the users computer and find all installed patches
* the date the patches were installed
* the serial number of the users computer
* the computer name, os version, last boot up time, and mac address
and then have all this output to a database file. At the command prompt I've tried:
wmic qfe get description, hotfixid
This does return the patch information I'm looking for, but how do I combine that line of code with:
wmic os get version, csname, serialnumber, lastbootuptime
and
wmic nicconfig get macaddress
and then get all this to output to a database file?

Thank you for the links. I checked out http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx and
found lots of good information. I also found a good command that will print information to a text file.
Basically what I'm trying to do is retrieve a list of all installed updates (Windows updates and 3rd party updates). I do like that the below code because it gives me the KB numbers for the Windows updates. I need this information so my IT co-workers &
I can keep track of which of our user computers need a patch/update installed and preferably which patch/update. The minimum we want to know is which patches / updates have been installed on which computer. If you wondering why we don't have Windows automatic
updates enable, that's because we are not allowed to.
This is my code so far.
#if you want the computer name, use this command
get-content env:computername
$computer = get-content env:computername
#list of installed patches
Get-Hotfix -ComputerName $computer#create a text file listing this information
Get-Hotfix > 'C:\users\little e\Documents\WMI help\PowerShell\printOutPatchList.txt'
I know you don't want to tell me the code that will print this out to a database (regardless if it's Access or SQL), and that's find. But maybe you can tell me this. Is it possible to have the results of this sent to a database file or do I need to go into
SQL and write code for SQL to go out and grab the data from an Excel file or txt file? If I'm understanding this stuff so far, then I suspect that it can be done both ways, but the code needs to be written correctly for this to happen. If it's true, then which
way is best (code in PowerShell to send information to SQL or SQL go get the information from the text file or Excel file)?

I need help with my code..

hi guys. as the subject says I need help with my code
the Q for my code is :
write a program that reads a positive integer x and calculates and prints a floating point number y if :
y = 1 ? 1/2 + 1/3 - ? + 1/x
and this is my code
   This program that reads a positive integer x and calculates
   and prints a floating point number y if :
             y = 1 - 1/2 + 1/3 - ? + 1/x
   import java.util.Scanner; // program uses class Scanner
    class Sh7q2
       // main method begins execution of Java application
       public static void main( String args[] )
      // create Scanner to obtain input from command window
         Scanner input = new Scanner( System.in );
         int i = 1; // i is to control the loop
         int n = 2; // n is suppose to control the number sign
         int x; // a positive integer entered by the user
         int m;
         System.out.println("Enter a positive integer");
         x = input.nextInt();
         do
            m = (int) Math.pow( -1, n)/i;
            System.out.println(m);
               n++;
               i++;
         while ( m >= 1/x );
      } // end method main
   } // end class Sh7q2 when I compile it there is no error
but in the run it tells me to enter a positive integer
suppose i entered 5
then the result is 1...
can anyone tell me what's wrong with my code

   This program that reads a positive integer x and calculates
   and prints a floating point number y if :
             y = 1 - 1/2 + 1/3 - ? + 1/x
   import java.util.Scanner; // program uses class Scanner
    class Sh7q2
       // main method begins execution of Java application
       public static void main( String args[] )
      // create Scanner to obtain input from command window
         Scanner input = new Scanner( System.in );
         int i = 1; // i is to control the loop
         int n = 1; // n is suppose to control the number sign
         int x; // a positive integer entered by the user
         double m;
         int a = 1;
         double sum = 0;
         System.out.println("Enter a positive integer");
         x = input.nextInt();
         for ( i = 1; a <= x; i++)
            m = Math.pow( -1, n+1)/i;
            sum = sum + m;
            n++;
            a++;
         System.out.print("y = " + sum);
      } // end method main
   } // end class Sh7q2is it right :S

Help with custom tables

Hello All,
I need some help with custom tables. I have created a custom table to maintain names and I also did table maintenance generation so that the user can maintain names in this table using SM30 transaction.
The question is, in my program on the selection screen when the user press F4 I need to display the values maintained in this custom table...
Can anyone help me with this.
Thanks
Pavan

If I understood you correctly, you have a program in which one or some of the selection screen fields refer to a custom database table field(s).
You want to implement a F4 functionality.
Fill an internal table with the values you want to show.
Call the function module 'F4IF_INT_TABLE_VALUE_REQUEST' in the event AT SELECTION-SCREEN ON VALUE-REQUEST FOR MYPARAM as follows.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = MYITAB-FIELD
            dynprofield = MYSELSCREENPARAM
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = my_f4_itab.
Srinivas

Re: How to disable the personalize tab from help-- diag-- custom code in 11i.

Dear,
How to Active this help--diagnostics--custom code--personalize, because i had tried by sys Adminstrator---> Profile--->system and put profile as Utility Diagnostic to my User Level.

Hi,
Please refer note:
How To Enable/Disable The Forms Personalization Menu (Doc ID 550626.1)
Please check the above note, and also confirm you logout and login back after making changes to the profile.
Thanks &
Best Regards,

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

Help with Exit Code: 7

Install Flex 4
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
WARNING: Memory requirements not met for {74EF259F-1DC6-4DEE-866B-0707173D7654}
ERROR: Custom Action for payload {74EF259F-1DC6-4DEE-866B-0707173D7654} Adobe Flash Builder returned error. Failing this payload.
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Builder: Install failed
My Pc
Pentium D CPU 2.80GHz, 2.80GHz
992 MB in RAM
HDD: 38.0GB, Used: 23.3GB, Free: 14.7GB
Sistem
Microsoft Windows XP Pro.
Ver. 2002
Service Pack 3
Help to install tehe Flex Build 4, plase.

Hi,
I had a similar problem (see error details below) installing on Windows 7 Professional using a domain account which is in the local admin group. I think my problem was due to an @ character in one of the following environment variables:
APPDATA=C:\Users\my_username@my_company.com\AppData\Roaming
HOMEPATH=\Users\my_username@my_company.com
LOCALAPPDATA=C:\Users\my_username@my_company.com\AppData\Local
USERPROFILE=C:\Users\my_username@my_company.com
I solved the problem by creating a local account with a plalin alphabetical username, adding it to the local administrator group and re-running the installer under that account by right clicking and selecting "Run as Administrator".
I got this idea from the following blog posts:
http://www.niallodoherty.com/post.cfm/adobe-flash-builder-4-installation-error-exit-code-7
http://www.joebillman.com/blog/2010/04/flash-builder-4-install-error/
Hope that helps,
Carl
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: Custom Action for payload {74EF259F-1DC6-4DEE-866B-0707173D7654} Adobe Flash Builder returned error. Failing this payload.
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Builder: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed

Help with Custom calculation script in Acrobat 8

Hi all, I am using acrobat 8 on OS 10.5
I am trying to add certain fields (numbers) and then subtract another field value to give an end result.
I don't know anything about Javascript, would anyone be able to help with any info on how I achieve this result? I can only see Add, x and average etc... nothing there for subtraction
Thanks for any help in advance
Swen

This should get you started:
>if (event) {
// get values from two text fields
var a = Number(this.getField('Text1').value);
var b = Number(this.getField('Text2').value);
// subtract the values and show it
this.event.target.value = a - b;
Place this in a 3d text field, as a Custom Calculation Script.

Noob needs help with this code...

Hi,
I found this code in a nice tutorial and I wanna make slight
adjustments to the code.
Unfortunately my Action Script skills are very limited... ;)
This is the code for a 'sliding menue', depending on which
button u pressed it will 'slide' to the appropriate picture.
Here's the code:
var currentPosition:Number = large_pics.pic1._x;
var startFlag:Boolean = false;
menuSlide = function (input:MovieClip) {
if (startFlag == false) {
startFlag = true;
var finalDestination:Number = input._x;
var distanceMoved:Number = 0;
var distanceToMove:Number =
Math.abs(finalDestination-currentPosition);
var finalSpeed:Number = .2;
var currentSpeed:Number = 0;
var dir:Number = 1;
if (currentPosition<=finalDestination) {
dir = -1;
} else if (currentPosition>finalDestination) {
dir = 1;
this.onEnterFrame = function() {
currentSpeed =
Math.round((distanceToMove-distanceMoved+1)*finalSpeed);
distanceMoved += currentSpeed;
large_pics._x += dir*currentSpeed;
if (Math.abs(distanceMoved-distanceToMove)<=1) {
large_pics._x =
mask_pics._x-currentPosition+dir*distanceToMove;
currentPosition = input._x;
startFlag = false;
delete this.onEnterFrame;
b1.onRelease = function() {
menuSlide(large_pics.pic1);
b2.onRelease = function() {
menuSlide(large_pics.pic2);
b3.onRelease = function() {
menuSlide(large_pics.pic3);
b4.onRelease = function() {
menuSlide(large_pics.pic4);
I need to adjust five things in this code...
(1) I want this menue to slide vertically not horizontally.
I changed the 'x' values in the code to 'y' which I thought
would make it move vertically, but it doesn't work...
(2) Is it possible that, whatever the distance is, the
"sliding" time is always 2.2 sec ?
(3) I need to implement code that after the final position is
reached, the timeline jumps to a certain movieclip to a certain
label - depending on what button was pressed of course...
I tried to implement this code for button number two...
b2.onRelease = function() {
menuSlide(large_pics.pic2);
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
--> sliding still works but it doesn't jump to the
appropriate label...
(4) I wanna add 'Next' & 'Previous' buttons to the slide
show - what would be the code in this case scenario ?
My first thought was something like that Flash checks which
'pic' movieclip it is showing right now (pic1, pic2, pic3 etc.) and
depending on what button u pressed u go to the y value of movieclip
'picX + 1' (Next button) or 'picX - 1' (Previous button)...
Is that possible ?
(5) After implementing the Next & Previous buttons I need
to make sure that when it reached the last pic movieclip it will
not go further on the y value - because there is no more pic
movieclip.
Options are to either slide back to movieclip 'pic1' or
simply do nothing any more on the next button...
I know this is probably Kindergarten for you, but I have only
slight ideas how to do this and no code knowledge to back it up...
haha
Thanx a lot for your help in advance !
Always a pleasure to learn from u guys... ;)
Mike

Hi,
I made some progress with the code thanx to the help of
Simon, but there are still 2 things that need to be addressed...
(1) I want the sliding time always to be 2.2 sec...
here's my approach to it - just a theory but it might work:
we need a speed that changes dynamically depending on the
distance we have to travel...
I don't know if that applies for Action Scrip but I recall
from 6th grade, that...
speed = distance / time
--> we got the time (which is always 2.2 sec)
--> we got the disctance
(currentposition-finaldestination)
--> this should automatically change the speed to the
appropriate value
Unfortunately I have no clue how the action script would look
like (like I said my action script skills are very limited)...
(2) Also, one other thing I need that is not implemented yet,
is that when the final destination is reached it jumps to a certain
label inside a certain movieclip - every time different for each
button pressed - something like:
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
that statement just doesn't work when I put it right under
the function for each button...
Thanx again for taking the time !!!
Mike

Help with html code - inserting video into Muse

I am seeking help writing the code to insert a video into Muse. I uploaded video into my Business Catalyst hosting. I need it to autoplay, loop and not show any controls or frames.
When I host video on Vimeo or YouTube, I see markings on the video that is why I am trying to just host in the same place that the files are stored for my website. If there is a way to host on youtube with out any markings showing up on the video I would be open to that too.
I don't want to see any play button or time bar.
Thanks in advance!!

Hello,
Just as an FYI - we also have an HTML5 video tool over at MuseThemes.com that achieves this, but works on mobile devices as well. The link above looks like it uses Flash, which isn't common anymore since the release of HTML5 based video.
Simply drag the widget out onto your canvas, and link up your videos / set options like loop, controls visible, etc. It's quite a flexible widget, and there's a complete training video included so you don't get stuck
Check out the widget here
Just wanted to provide another alternative that could be helpful. Cheers!
Steve Harris
MuseThemes.com

Help with abap code in Transformation

Hi Experts,
we have a scenario where we load delta data from an DSO into a Cube.
The records in the DSO looks like below.
Location as (L)
WorkOrder as (W)
Startdate(DDMMYYYY)/time (HH:MM:SS) as (S)
Finishdate/time as (F)
L1
W1
21/04/2009/10:00:00
21/04/2009/12:00:00
L1
W2
21/04/2009/14:00:00
21/04/2009/23:00:00
|| L1 ||W3|| 21/04/2009/16:00:00 ||21/04/2009/20:00:00 ||
Total time ( April 2009 ) for above Location L1 should be calculated as a difference between W1 and W2 since W3 is a overlapping record. So the result would be 13 Hrs. Work Orders are summarised, so we dont need work order info in the output.
Can you experts help me with the code to implement??
Thanks,
DV

For each location, for example L1, move the records to an internal table itab.
sort itab by startdate.
read table itab index 1.
You will get the first value.
sort itab by finishdate descending.
read table itab index 1.
you will get the second value.
Calculate the difference and populate it to the internal table.
finally modify the source package.
I have just given the logic. I hope you can build upon this.
I hope it helps.
Thanks.

How to get value in previous column and another row from Matrix with Custom Code?

I want to calculate the value of tb_Open and tb_Close. I try to use custom code for calculate them. tb_close is correct but tb_Open is not correct that show value = 0 .
This is example report:
* I have 2 Dataset , Dataset1 is all data for show in my report. Dataset2 is only first Open for first month
* First value of Open is item field in Dataset2 and this value only for first month (january). But for other month Open value get from Close in previous month.
Detail for Red number:
1. tb_Open -> tb_Close in previous month but first month from item field in Dataset2
expression =FormatNumber(Code.GetOpening(Fields!month.Value,First(Fields!open.Value, "Dataset2")))
2. tb_TOTAL1 group on item_part = 1
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)))
3. tb_TOTAL2 group on item_part = 3 or item_part = 4
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) + ReportItems!tb_TOTAL1.Value )
4. tb_TOTAL3 group on item_part = 2
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) - ReportItems!tb_TOTAL2 .Value)
5. tb_Close -> calculate from tb_TOTAL3 - tb_Open
expression =FormatNumber(Code.GetClosing(ReportItems!tb_TOTAL3.Value,ReportItems!tb_Open.Value))
My custom code:
Dim Shared prev_close As Double
Dim Shared now_close As Double
Dim Shared now_open As Double
Public Function GetClosing(TOTAL3 as Double,NowOpening as Double)
    now_close = TOTAL3 + NowOpening
    prev_close = now_close
    Return now_close
End Function
Public Function GetOpening(Month as String,NowOpen as Double)
    If Month = "1" Then
        now_open = NowOpen
    Else
        now_open = prev_close
    End If
    Return now_open
End Function
Thanks alot for your help!
Regards
Panda A

Looks okay to me.
Perhaps the variables should be declared as public (?)

Help with custom code in ZTIGather.wsf

Similar Messages

Maybe you are looking for