Help with abap code in Transformation

Hi Experts,
we have a scenario where we load delta data from an DSO into a Cube.
The records in the DSO looks like below.
Location as (L)
WorkOrder as (W)
Startdate(DDMMYYYY)/time (HH:MM:SS) as (S)
Finishdate/time as (F)
L1
W1
21/04/2009/10:00:00
21/04/2009/12:00:00
L1
W2
21/04/2009/14:00:00
21/04/2009/23:00:00
|| L1 ||W3|| 21/04/2009/16:00:00 ||21/04/2009/20:00:00 ||
Total time ( April 2009 ) for above Location L1 should be calculated as a difference between W1 and W2 since W3 is a overlapping record. So the result would be 13 Hrs. Work Orders are summarised, so we dont need work order info in the output.
Can you experts help me with the code to implement??
Thanks,
DV

For each location, for example L1, move the records to an internal table itab.
sort itab by startdate.
read table itab index 1.
You will get the first value.
sort itab by finishdate descending.
read table itab index 1.
you will get the second value.
Calculate the difference and populate it to the internal table.
finally modify the source package.
I have just given the logic. I hope you can build upon this.
I hope it helps.
Thanks.

Similar Messages

Help with ABAP code in CMOD.

dear all,
can you help me solve the below abap coding problem? thanks.
somewhere at the top
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE E_T_RANGE.
      LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
        FIND l_s_var_range-vnam IN TABLE it_vnam.
        IF sy-subrc = 0.
          l_check = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
Error message...
"L_S_VAR_RANGE" cannot be converted to the line type of "I_T_VAR_RANGE".
Thanks all.

Hi Try this,
DATA: L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA: L_S_VAR_RANGE LIKE LINE OF I_T_VAR_RANGE .
LOOP AT I_T_VAR_RANGE INTO L_S_VAR_RANGE. <-- error msg stops here.
        FIND l_s_var_range-vnam IN TABLE it_vnam.
        IF sy-subrc = 0.
          l_check = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
Regards,
Ravi

Can you help with the code to publish Flash to my own domain.

Thank you for your help, I publish the my site to my own domain, I do not use .Mac, I tested your code and ity works well on .Mac, can you help with the code to publish to my own domain.
Thank you again

You appear to have just collected a variety of code snippets and thrown them together, including a section of AS2 code ( gage.onRelease = function() {... )
The suggestion I offered yesterday still stands. You should find a tutorial regarding AS3 and the atan2 function. Beyond that, what you show suggests this is a school assignment. You should seek help from your fellow students and instructor if that is the case.

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

Need help with WMI code that will send output to db

'm new to WMI code writing, so I need some help with writing code that we can store on our server. I want this code to run when a user logs into their computer
and talks to our server. I also want the code to:
* check the users computer and find all installed patches
* the date the patches were installed
* the serial number of the users computer
* the computer name, os version, last boot up time, and mac address
and then have all this output to a database file. At the command prompt I've tried:
wmic qfe get description, hotfixid
This does return the patch information I'm looking for, but how do I combine that line of code with:
wmic os get version, csname, serialnumber, lastbootuptime
and
wmic nicconfig get macaddress
and then get all this to output to a database file?

Thank you for the links. I checked out http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx and
found lots of good information. I also found a good command that will print information to a text file.
Basically what I'm trying to do is retrieve a list of all installed updates (Windows updates and 3rd party updates). I do like that the below code because it gives me the KB numbers for the Windows updates. I need this information so my IT co-workers &
I can keep track of which of our user computers need a patch/update installed and preferably which patch/update. The minimum we want to know is which patches / updates have been installed on which computer. If you wondering why we don't have Windows automatic
updates enable, that's because we are not allowed to.
This is my code so far.
#if you want the computer name, use this command
get-content env:computername
$computer = get-content env:computername
#list of installed patches
Get-Hotfix -ComputerName $computer#create a text file listing this information
Get-Hotfix > 'C:\users\little e\Documents\WMI help\PowerShell\printOutPatchList.txt'
I know you don't want to tell me the code that will print this out to a database (regardless if it's Access or SQL), and that's find. But maybe you can tell me this. Is it possible to have the results of this sent to a database file or do I need to go into
SQL and write code for SQL to go out and grab the data from an Excel file or txt file? If I'm understanding this stuff so far, then I suspect that it can be done both ways, but the code needs to be written correctly for this to happen. If it's true, then which
way is best (code in PowerShell to send information to SQL or SQL go get the information from the text file or Excel file)?

I need help with my code..

hi guys. as the subject says I need help with my code
the Q for my code is :
write a program that reads a positive integer x and calculates and prints a floating point number y if :
y = 1 ? 1/2 + 1/3 - ? + 1/x
and this is my code
   This program that reads a positive integer x and calculates
   and prints a floating point number y if :
             y = 1 - 1/2 + 1/3 - ? + 1/x
   import java.util.Scanner; // program uses class Scanner
    class Sh7q2
       // main method begins execution of Java application
       public static void main( String args[] )
      // create Scanner to obtain input from command window
         Scanner input = new Scanner( System.in );
         int i = 1; // i is to control the loop
         int n = 2; // n is suppose to control the number sign
         int x; // a positive integer entered by the user
         int m;
         System.out.println("Enter a positive integer");
         x = input.nextInt();
         do
            m = (int) Math.pow( -1, n)/i;
            System.out.println(m);
               n++;
               i++;
         while ( m >= 1/x );
      } // end method main
   } // end class Sh7q2 when I compile it there is no error
but in the run it tells me to enter a positive integer
suppose i entered 5
then the result is 1...
can anyone tell me what's wrong with my code

   This program that reads a positive integer x and calculates
   and prints a floating point number y if :
             y = 1 - 1/2 + 1/3 - ? + 1/x
   import java.util.Scanner; // program uses class Scanner
    class Sh7q2
       // main method begins execution of Java application
       public static void main( String args[] )
      // create Scanner to obtain input from command window
         Scanner input = new Scanner( System.in );
         int i = 1; // i is to control the loop
         int n = 1; // n is suppose to control the number sign
         int x; // a positive integer entered by the user
         double m;
         int a = 1;
         double sum = 0;
         System.out.println("Enter a positive integer");
         x = input.nextInt();
         for ( i = 1; a <= x; i++)
            m = Math.pow( -1, n+1)/i;
            sum = sum + m;
            n++;
            a++;
         System.out.print("y = " + sum);
      } // end method main
   } // end class Sh7q2is it right :S

Inner join Vs Outer join with ABAP code...?

Inner join Vs Outer join with ABAP code...?

Inner Join means, it will not select that recor at all, unless there is a matching entry in the second table.
suppose table VBAK INNER join table VBAP on VBAKVBELN = VBAPVBELN.
In this case, if there are no entries in VBAP, the header entry also will not show up.
But in case of OUTER JOIN, even if there is no items, it will show the header entry(VBAK) with blank columns for fields from item table.(VBAP)
here is one sample for inner join.
SELECT   A~EBELN
           A~EKORG
           A~EKGRP
           A~BSART
           A~LPONR
           A~LOEKZ
           A~LIFNR
           A~RESWK
           B~AEDAT
           B~WERKS
           B~MATNR
           B~MENGE
           B~EBELP
           B~ELIKZ
           B~PLIFZ
           B~PSTYP
           B~KNTTP
           B~MATKL
           B~ZZD_PLANT
           FROM EKKO AS A INNER JOIN EKPO AS B
           ON
           AEBELN = BEBELN
           INTO CORRESPONDING FIELDS OF TABLE T_DATA
           FOR ALL ENTRIES IN T_EKET
           WHERE
           A~EBELN EQ T_EKET-EBELN AND
           A~BSART EQ C_UBSTO      AND
           A~EKORG IN S_EKORG      AND
           A~EKGRP IN S_EKGRP      AND
           A~BSTYP EQ C_BSTYP      AND
           A~LOEKZ EQ SPACE        AND " Order not deleted
           A~RESWK IN S_RESWK      AND
           B~EBELN EQ T_EKET-EBELN AND
           B~EBELP EQ T_EKET-EBELP AND
           B~WERKS IN S_WERKS      AND
           B~MATNR IN S_MATNR      AND
           B~MATKL IN S_MATKL      AND
           B~LOEKZ EQ SPACE.           " Line item not deleted

Help with ABAP Structure to XML - Simple Transformation

Hi guys,
I need help with a Simple Transformation. I am trying to convert a structure in ABAP to XML String but i ma getting short dumps...
Can any of you help.
Thanks in advance.
*& Report ZTESTXML
REPORT ZTESTXML.
class demo DEFINITION.
   PUBLIC SECTION.
   CLASS-METHODS main.
   ENDCLASS.
   CLASS demo IMPLEMENTATION.
     method main.
       data : begin of account,
                partner type bu_partner,
                primary(1),
                update(3),
                email(50),
                memberid(4),
                telephone(12),
                fax(10),
                dept(20),
                end of account.
        data : xmlstr type xstring.
                account-partner = '12345'.
                account-primary = 'N'.
                account-update = 'Yes'.
                account-email = 'zz at hotmail.com'.
                account-memberid = '555'.
                account-telephone = '123-448-6710'.
                account-fax = '345-123-7899'.
                account-dept = 'Info Systems'.
                call TRANSFORMATION ztest_inttable
                                    SOURCE account = 'account'
                                    result XML xmlstr.
       call FUNCTION 'DISPLAY_XML_STRING'
           EXPORTING xml_string = xmlstr.
       ENDMETHOD.
       ENDCLASS.
       start-of-SELECTION.
         demo=>main( ).
Transformation
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="account"/>
<tt:template>
    <IGT_CRM_AccountInfo>
      <Account>
        <tt:ref name=".account">
          <tt:attribute name="Id" value-ref="PARTNER"/>
          <tt:attribute name="Primary" value-ref="primary"/>
          <tt:attribute name="Update" value-ref="update"/>
          <Contact>
            <tt:attribute name="EMail" value-ref="email"/>
            <tt:attribute name="Member Id" value-ref="memberid"/>
          </Contact>
          <Communications>
            <tt:attribute name="Telephone" value-ref="telephone"/>
            <tt:attribute name="Fax" value-ref="fax"/>
          </Communications>
          <IGT>
            <tt:attribute name="Department" value-ref="dept"/>
          </IGT>
        </tt:ref>
      </Account>
    </IGT_CRM_AccountInfo>
</tt:template>
</tt:transform>
Dump message
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_ST_REF_ACCESS', was not caught in
procedure "MAIN" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The goal was to access variable "PARTNER". However, this access was not
possible.

to convert abap itab or variable into xml string use ABAP key word call transformation.
call transformation (`ID`)
            source output = itab[]
            result xml xml_out.
where itab is your internal table or any abap variable.
xml_out is type string which will hold the resulting xml.
ID is the transformation program. if you wanto use your own transformation, use your XSLT or ST program there.
Raja

Please help me with ABAP code

Hi Gurus,
Please help me with the code.
Algorithm: This is for master data extraction. I need to append some records to I_T_DATA before the loop on I_T_DATA begins.
ZTAB is a custom defined table with key KEY. STAB is standard table with key KEY.
1. Create an internal table I_T_STAB similar to STAB.
2. Loop at I_T_DATA
    Read record from ZTAB where KEY = I_T_DATA-KEY and { field1 <> I_T_DATA-field1 or field2 <> I_T_DATA-field2 <> field3 <> I_T_DATA-field3}
If success
     Delete record from I_T_DATA.
Else
     Continue loop.
Copy all records of STAB to I_T_STAB.
3. Delete records in I_T_STAB where I_T_STAB-KEY = ZTAB-KEY.
Now
4. Delete all records in I_T_DATA where I_T_DATA-KEY = I_T_STAB-KEY.
Now,
5. Append all the remaining records from step 3 in I_T_STAB to I_T_DATA.
Please help me with the code upto this part.
Now the actual code in exit starts.
Loop at I_T_DATA
Thanks,
Regards,
aarthi
[email protected]

You might get a quick answer if you were to post in the ABAP forum.
Moderator, please move to ABAP forum. Thanks.
Regards,
Rich Heilman

IDOC: How to create child segment with abap code.

Hi,
I'am trying to write an abap code to create segments for an Idoc which structure is the following:
ZLE_00060_DLVY
> E1EDL20
> Z1DEL_CONS
>Z1DEL_MAT_HEADER
> Z1DEL_MAT
> E1EDL20RET2
> E1EDL22
> E1EDL21
> E1EDL23
> E1EDL51
I receive a sintax error: Error in IDoc with status 26 .
Checking the result I note all segment at the same level and an error about the segment E1EDL22
EDI: Syntax error in IDoc (segment cannot be identified)
     Message no. E0078
Diagnosis
     The segment E1EDL22 does not occur at the current level of the basic
     type DELVRY05 (extension ZLE_00060_DLVY).
     This error can have several reasons:
     o   The segment E1EDL22 is assigned to a group whose header segment does
         not occur.
     o   The segment E1EDL22 does not exist in the syntax description of the
         basic type DELVRY05 (extension ZLE_00060_DLVY).
     o   The sequence of segments in the group in which the segment appears
         is incorrect.
     Previous errors ('mandatory' segment or group missing) may be due to
     this error.
Procedure
     Please check the IDoc or the syntax description of the basic type
     DELVRY05 (extension ZLE_00060_DLVY).
After the error I have:
data records
E1EDL20
Z1DEL_CONS
Z1DEL_MAT_HEADER
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
Z1DEL_MAT
E1EDL20RET2
E1EDL22
E1EDL21
Abap code:
        idoc_data-segnam = 'Z1DEL_CONS'.
        idoc_data-sdata = s_z1del_cons.
        append idoc_data.
          idoc_data-segnam = 'Z1DEL_MAT_HEADER'.
          s_z1del_mat_header-tsegment = 'MATERIAL'.
          idoc_data-sdata = s_z1del_mat_header.
          append idoc_data.
        clear idoc_data-sdata.                            <<<<<<<<<<< how to indent the structure because this is a child.
         idoc_data-sdata = s_Z1DEL_MAT.
         idoc_data-segnam = 'Z1DEL_MAT'.
         append idoc_data.
         idoc_data-segnam = 'E1EDL20RET2'.
         idoc_data-sdata = s_E1EDL20RET2.
         append idoc_data.
         clear idoc_data.
         idoc_data-segnam = 'E1EDL22'.
         idoc_data-sdata = s_e1edl22.
         append idoc_data.
         clear idoc_data.
         idoc_data-segnam = 'E1EDL21'.
         idoc_data-sdata = s_e1edl21.
         append idoc_data.
Any help will be well appreciated.
Thanks in advance.
Regards,
    Giovanni

Hi,
following in debugging mode the abap code of the INCLUDE ZXTRKU02 where is defined the TABLES IDOC_DATA STRUCTURE EDIDD, I find that all field of the table IDOC_DATA are not set. More exactly my expectation is to find values for SEGNUM, HLEVEL, PSGNUM.
In a few words I need to execute an enhancement, via abap code, of the struscure of the idoc before sending it out since I have a requirement to test this enhancement in my XI environment, receiving as input this ideoc modified.
Then, I need to add a new segment and one child.
Any suggestion will be well appreciated.
Thanks in advance.
Regards,
    Giovanni

ABAP code in transformation

Hello,
I have a transformation routine as follows:
DATA:l_lifnr1 TYPE /BI0/MBATCH-VENDOR,
         l_greybatch TYPE /BI0/MBATCH-BATCH,
         oref   TYPE REF TO cx_root,
          l_num type i,
          l_len type i,
          l_len1(2) type c.
    l_len = strlen( SOURCE_FIELDS-/BIC/ZBAT_SUP ).
    l_len1 = ( l_len - 1 ).
    try.
        concatenate SOURCE_FIELDS-/BIC/ZBAT_SUP+0(l_len1) 'G' into
        l_greybatch.
      catch CX_SY_CONVERSION_NO_NUMBER INTO oref.
    ENDTRY.
=============
this transformation is between a infosource and infoobject. When i run the DTP, it gives an error at the line "concatenate SOURCE_FIELDS-/BIC/ZBAT_SUP+0(l_len1) 'G' into l_greybatch."
This -/BIC/ZBAT_SUP is calculated using a routine in the transformation between the datasource and the infosource. The same DTP is used for both load across both these transformations.
what is wrong? any suggestions?

Hello Siegfried,
Thank you very much.
As you rightly pointed out -/BIC/ZBAT_SUP is not filled.
But i didnt want to fill it in the second transformation(between the infosrc and infoobject) becoz, this is used for populating 2 differnt objects for which there are different rules. I will have to run the logic(for populating -/BIC/ZBAT_SUP) twice in these 2 rules.
Hence i was trying to populate it in the first transformation(between the datasrc and the infosrc) and then use this value in the 2 rules in the second transformation.
Can you give me some other logic to do the same with the necessary ABAP code?
Following is the routine use to populate -/BIC/ZBAT_SUP in the first transformation:
$$ begin of routine - insert your code only below this line        -
DATA: l_charg TYPE /BIC/AZMM_O0100-BATCH.
      SELECT SINGLE /BIC/ZBAT_SUP FROM /BIC/AZMM_O0100
      into l_charg
          WHERE BATCH = SOURCE_FIELDS-CHARG.
     RESULT = l_charg .
$$ end of routine - insert your code only before this line         -
ENDMETHOD.                    "compute_ZBAT_SUP
====================================================
The second transformation populates 2 different vendor fields in 2 different rules. Both the rules use the follwing 2 routines:
$$ begin of routine - insert your code only below this line        -
    DATA:l_lifnr1 TYPE /BI0/MBATCH-VENDOR,
         l_greybatch TYPE /BI0/MBATCH-BATCH,
         oref   TYPE REF TO cx_root,
          l_num type i,
          l_len type i,
          l_len1(2) type c.
    l_len = strlen( SOURCE_FIELDS-/BIC/ZBAT_SUP ).
    l_len1 = ( l_len - 1 ).
      try.
          concatenate SOURCE_FIELDS-/BIC/ZBAT_SUP+0(l_len1) 'G' into
          l_greybatch.
     move SOURCE_FIELDS-/BIC/ZBAT_SUP(l_len1) to l_greybatch.
     move 'G' to l_greybatch+l_len1(1).
        catch CX_SY_CONVERSION_NO_NUMBER INTO oref.
      ENDTRY.
*Populating Supplying(finished) batch vendor
      select single VENDOR from /BI0/MBATCH
      into l_lifnr1
      where BATCH = l_greybatch.
      RESULT = l_lifnr1.
$$ end of routine - insert your code only before this line         -
ENDMETHOD.                    "compute_0VENDOR
=====================================================
METHOD compute_ZVENDOR.
IMPORTING
    request     type rsrequest
    datapackid type rsdatapid
    SOURCE_FIELDS-/BIC/ZBAT_SUP TYPE /BIC/OIZBAT_SUP
   EXPORTING
     RESULT type tys_TG_1-/BIC/ZVENDOR
    DATA:
      MONITOR_REC    TYPE rsmonitor.
$$ begin of routine - insert your code only below this line        -
DATA:l_lifnr1 TYPE /BI0/MBATCH-VENDOR.
*Populating Supplying(finished) batch vendor
            select single VENDOR from /BI0/MBATCH
            into l_lifnr1
            where BATCH = SOURCE_FIELDS-/BIC/ZBAT_SUP.
     RESULT = l_lifnr1.
$$ end of routine - insert your code only before this line         -
ENDMETHOD.                    "compute_ZVENDOR
===================================
thank you....

Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
    I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
    I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
   Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
   Thanks in advance.
Regards,
Venkat

Not able to remove the ABAP code from Transformation

Hello Experts,
We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
we are doing following activity to remove the break point.
1. Open the transformation.
2. Open the field routine.
3. Going to ABAP code in field routine.
4. Remove the hard coded Break Point from ABAP code.
5. Saving the code.
6. It's taking to again filed routine window.
7. We close the window and activate the transformation.
8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
9. Not able to remove the hard coded break point.
Can anyone know how to do this.
Help will be appreciated.
Thanks

Hi,
As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
Regards,
Arminder

Help with ABAP

I need some help with some ABAP.
I have a date value which is for example 01.01.2008. I want to store it in a DATS info object which is of length 8. How can I strip out the . in a transformation rule and should this logic be written in a START routine.
Thanks

Thanks for this.
the description for PDATE mentions an input value of DD/MM/YYYY, you would'nt know whether / could also mean . and/or how can I see the logic before PDATE?
Another problem encountered - since the field is referencing 0DATE (by default for DATS fields) I cannot make changes to the conversion exit or info object transfer routine
Edited by: Niten Shah on May 28, 2008 2:05
Okay have found the Function Modules behind the conversion routines:
CONVERSION_EXIT_xxxxx_INPUT
CONVERSION_EXIT_xxxxx_OUTPUT
Edited by: Niten Shah on May 28, 2008 2:10 PM

Noob needs help with this code...

Hi,
I found this code in a nice tutorial and I wanna make slight
adjustments to the code.
Unfortunately my Action Script skills are very limited... ;)
This is the code for a 'sliding menue', depending on which
button u pressed it will 'slide' to the appropriate picture.
Here's the code:
var currentPosition:Number = large_pics.pic1._x;
var startFlag:Boolean = false;
menuSlide = function (input:MovieClip) {
if (startFlag == false) {
startFlag = true;
var finalDestination:Number = input._x;
var distanceMoved:Number = 0;
var distanceToMove:Number =
Math.abs(finalDestination-currentPosition);
var finalSpeed:Number = .2;
var currentSpeed:Number = 0;
var dir:Number = 1;
if (currentPosition<=finalDestination) {
dir = -1;
} else if (currentPosition>finalDestination) {
dir = 1;
this.onEnterFrame = function() {
currentSpeed =
Math.round((distanceToMove-distanceMoved+1)*finalSpeed);
distanceMoved += currentSpeed;
large_pics._x += dir*currentSpeed;
if (Math.abs(distanceMoved-distanceToMove)<=1) {
large_pics._x =
mask_pics._x-currentPosition+dir*distanceToMove;
currentPosition = input._x;
startFlag = false;
delete this.onEnterFrame;
b1.onRelease = function() {
menuSlide(large_pics.pic1);
b2.onRelease = function() {
menuSlide(large_pics.pic2);
b3.onRelease = function() {
menuSlide(large_pics.pic3);
b4.onRelease = function() {
menuSlide(large_pics.pic4);
I need to adjust five things in this code...
(1) I want this menue to slide vertically not horizontally.
I changed the 'x' values in the code to 'y' which I thought
would make it move vertically, but it doesn't work...
(2) Is it possible that, whatever the distance is, the
"sliding" time is always 2.2 sec ?
(3) I need to implement code that after the final position is
reached, the timeline jumps to a certain movieclip to a certain
label - depending on what button was pressed of course...
I tried to implement this code for button number two...
b2.onRelease = function() {
menuSlide(large_pics.pic2);
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
--> sliding still works but it doesn't jump to the
appropriate label...
(4) I wanna add 'Next' & 'Previous' buttons to the slide
show - what would be the code in this case scenario ?
My first thought was something like that Flash checks which
'pic' movieclip it is showing right now (pic1, pic2, pic3 etc.) and
depending on what button u pressed u go to the y value of movieclip
'picX + 1' (Next button) or 'picX - 1' (Previous button)...
Is that possible ?
(5) After implementing the Next & Previous buttons I need
to make sure that when it reached the last pic movieclip it will
not go further on the y value - because there is no more pic
movieclip.
Options are to either slide back to movieclip 'pic1' or
simply do nothing any more on the next button...
I know this is probably Kindergarten for you, but I have only
slight ideas how to do this and no code knowledge to back it up...
haha
Thanx a lot for your help in advance !
Always a pleasure to learn from u guys... ;)
Mike

Hi,
I made some progress with the code thanx to the help of
Simon, but there are still 2 things that need to be addressed...
(1) I want the sliding time always to be 2.2 sec...
here's my approach to it - just a theory but it might work:
we need a speed that changes dynamically depending on the
distance we have to travel...
I don't know if that applies for Action Scrip but I recall
from 6th grade, that...
speed = distance / time
--> we got the time (which is always 2.2 sec)
--> we got the disctance
(currentposition-finaldestination)
--> this should automatically change the speed to the
appropriate value
Unfortunately I have no clue how the action script would look
like (like I said my action script skills are very limited)...
(2) Also, one other thing I need that is not implemented yet,
is that when the final destination is reached it jumps to a certain
label inside a certain movieclip - every time different for each
button pressed - something like:
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
that statement just doesn't work when I put it right under
the function for each button...
Thanx again for taking the time !!!
Mike

Help with abap code in Transformation

Similar Messages

Maybe you are looking for