Help with data load model

Hi,
I need help with a data load model. First, i'm doing delta extraction from R/3, we load data with a InfoSource to InfoCube A and InfoCube B.
I'm doing master data validation on the load, so if a load fails for InfoCube A, it fails for InfoCube B too (this is because i can have only 1 InfoPackage for the 2 infocubes, because of the delta update).
So i propose a new model in wich:
- The delta load is taked first to an ODS.
- ODS is cleaned before the delta update.
- Then i create 2 InfoPackages for full load from ODS to Infocube A, and from ODS to InfoCube B.
With this solution i can have 2 infopackages from ODS because i'm not doing a delta load from here to the cubes, and with 2 infopackages i can have independent validations for each cube so if one of them fails, the other can still be loaded sucessfully.
The solution fails because if i load delta from R/3 to the ODS i can't clean it first. The initialization and the old updates needs to be previuslly loaded on the ODS. Then i can't do full load to the cubes and neither have 2 infopackages.
Please help me to solve this issue.
thanks a lot

Hi jeremy,
what about this simple solution:
load data by delta from R/3 in your ODS. You can also have an ODS/cube for the historical data which is more space-saving than holding all the old data in PSA. Then you load your historical data from PSA into the historical ODS/cube.
From your ODS with the actual data you update your requests by full from ODS into the cubes with 2 different full infopackages. But because you load by full you have to use deletion selections in the infopackages to avoid duplicate data!
regards,
Jürgen

Similar Messages

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Need Help with data type conversion

Hello People,
I am new to java, i need some help with data type conversion:
I have variable(string) storing IP Address
IPAddr="10.10.103.10"
I have to call a library function which passes IP Address and does something and returns me a value.
The problem I have is that external function call in this library excepts IP Address in form of a byte array.
Here is the syntax for the function I am calling through my program
int createDevice (byte[] ipAddress).
now my problem is I don't know how to convert the string IPAddr variable into a byte[] ipAddress to pass it through method.

Class InetAddress has a method
byte[] getAddress() You can create an instance using the static method getByName() providing the IP address string as argument.

Insert OR Update with Data Loader?

Hello,
can i Insert OR Update at same time with Data Loader?
How can i do this?
Thanks.

The GUI loader wizard does allow for this including automatically adding values to the PICKLIST fields.
However, if you mean the command line bulk loader, the answer is no. And to compound the problem, the command line version will actually create duplicates for some of the objects. It appears that the "External Unique Id" is not really "unique" (as in constrained via unique index) for some of the objects. So be very careful when you prototype something with the GUI loader and then reuse the map on the command line version.
You will find that some objects can work well with the command line loader (some objects will not).
Works well (just a few examples):
Account (assuming your NAME,LOCATION fields are unique).
Financial Product
Financial Account
Financial Transaction
Will definitely create duplicates via command line bulk loader:
Contact
Asset
Also be aware that you might hear that during a go-live that Oracle will remove the 30k record limit on bulks loads (temporarily). I have not had any luck with Oracle Support making that change (2 clients specifically in the last 12 months).

Need Help with Dates

I am printing a calendar and certain events will be helds on certain dates.
One can edit the event if it has not passed the date. Events in the past can be viewed but not edited.
When I query the database the date must be formatted dd-MMM-yy
I am able to get today's date by doing this:
java.util.Date today = new java.util.Date();
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
String today_str = sdf.format(today);
My code for printing the calendar: I left out some of the table formatting in the JSP page.
GregorianCalendar d = new GregorianCalendar();
int today = d.get(Calendar.DAY_OF_MONTH);
int month = d.get(Calendar.MONTH);
d.set(Calendar.DAY_OF_MONTH,1);
int weekday = d.get(Calendar.DAY_OF_WEEK);
for(int i = Calendar.SUNDAY; i < weekday; i++)
out.print("<td> </td>");
do {
int day = d.get(Calendar.DAY_OF_MONTH);
out.print("<td>" + day + "</td>");
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
if(weekday == Calendar.SATURDAY)
out.println("</tr><tr valign=top>");
d.add(Calendar.DAY_OF_MONTH,1);
weekday = d.get(Calendar.DAY_OF_WEEK);
} while(d.get(Calendar.MONTH) == month);
if(weekday != Calendar.SUNDAY)
System.out.println();
The part I need help on is this:
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
I'm looping through each day of the month to print the days. I have the month, day, year as integers. How can I create a date object out of that and compare it to today's date to test if it's before or after today???
All the function in the Date class that I think would do this have been deprecated.

Need Help with Dates
Here is some information about dates:
There are many edible palm fruits, and one of the most widespread and favored of these is the data (Phoenix dactylifera). Dates were cultivated in ancient land from Mesopotamia to prehistoric Egypt, possibly as early as 6000 B.C. Then--as now--dates were a staple for the natives of those dry regions. Much later, Arabs spread dates around northern Africa, and dates were introduced into California by the Spaniards in 1765, around Mission San Ignacio.
The date prefers dry, hot climates, because date fruits are injured at temperatures of 20 degrees F, and the damp climate of the California coast was not favorable for fruit production. In the mid-1800s, the date industry developed in California's hot interior valleys and in Arizona. Now the date industry in the United States is localized mostly in the Coachella Valley, where the sandy soils permit the plants to be deeply irrigated. Today the new varieties, mostly introduced in this century, produce about 40 million pounds of dates per annum, or over 60% of the dates consumed in this country. The rest are imported mainly from Persia. According to one survey, about one million people are engaged entirely in date palm cultivation worldwide.
Hope that helps.

Help with date validation on input boxes.

I need some help with date validation on input boxes.
What I�m trying to create is a form where a user inputs dates and then the rest of the form calculates the other dates for them.
i.e. � A user inputs 2 dates (A & B) and then a 3rd date which is 11 weeks before date B is calculated automatically.
Is this possible and if so how do I do it ???
Thanks

Hi,
to get third date try this:
java.util.Date bDate = ...;
Calendar yourCalendar = new GregorianCalendar();
yourCalendar.setTime(bDate);
yourCalendar.roll(Calendar.WEEK_OF_YEAR, -11);
java.util.Date cDate = yourCalendar.getTime();Regards
Ldinka

Latest PowerQuery issues with data load to data models built with older version + issue when query is changed

We have a tool built in excel + Powerquery version 2.18.3874.242 - 32 Bit (No PowerPivot) using data load to data model (not to workbook). There are data filters linked to excel cells, inserted in OData query before data is pulled.
The Excel tool uses organisational credentials to authenticate.
System config: Win 8.1, Office 2013 (32 bit)
The tool runs for all users as long as they do not upgrade to PowerQuery_2.20.3945.242 (32-bit).
Once upgraded users can no longer get the data to load to the Model. Data still loads to the Workbook but the model breaks down. Resetting load to data model erases all measures.
Here are the exact errors users get:
1. [DataSource.Error] Cannot parse OData response result. Error: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
2. The Data Model table could not be refreshed: There isn't enough memory to complete this action. Try using less data or closing other applications. To increase memory available, consider ......

Hi Nitin,
Is this still an issue? If so, can you kindly provide the details that Hadeel has asked for?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn

Issue with Data Load Table

Hi All,
       i am facing issue with apex 4.2.4 ,using the Data Load Table concept's and in this look up used the
      Where Clause option ,it seems to be not working this where clause ,Please help me on this

hi all,
    it looks this where clause not filter with 'N' data ,Please help me ,how to solve this or help me on this

Need help with SQL*Loader not working

Hi all,
I am trying to run SQL*Loader on Oracle 10g UNIX platform (Red Hat Linux) with below command:
sqlldr userid='ldm/password' control=issue.ctl bad=issue.bad discard=issue.txt direct=true log=issue.log
And get below errors:
SQL*Loader-128: unable to begin a session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Can anyone help me out with this problem that I am having with SQL*Loader? Thanks!
Ben Prusinski

Hi Frank,
More progress, I exported the ORACLE_SID and tried again but now have new errors! We are trying to load an Excel CSV file into a new table on our Oracle 10g database. I created the new table in Oracle and loaded with SQL*Loader with below problems.
$ export ORACLE_SID=PROD
$ sqlldr 'ldm/password@PROD' control=prod.ctl log=issue.log bad=bad.log discard=discard.log
SQL*Loader: Release 10.2.0.1.0 - Production on Tue May 23 11:04:28 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader: Release 10.2.0.1.0 - Production on Tue May 23 11:04:28 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: prod.ctl
Data File: prod.csv
Bad File: bad.log
Discard File: discard.log
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table TESTLD, loaded from every logical record.
Insert option in effect for this table: REPLACE
Column Name Position Len Term Encl Datatype
ISSUE_KEY FIRST * , CHARACTER
TIME_DIM_KEY NEXT * , CHARACTER
PRODUCT_CATEGORY_KEY NEXT * , CHARACTER
PRODUCT_KEY NEXT * , CHARACTER
SALES_CHANNEL_DIM_KEY NEXT * , CHARACTER
TIME_OF_DAY_DIM_KEY NEXT * , CHARACTER
ACCOUNT_DIM_KEY NEXT * , CHARACTER
ESN_KEY NEXT * , CHARACTER
DISCOUNT_DIM_KEY NEXT * , CHARACTER
INVOICE_NUMBER NEXT * , CHARACTER
ISSUE_QTY NEXT * , CHARACTER
GROSS_PRICE NEXT * , CHARACTER
DISCOUNT_AMT NEXT * , CHARACTER
NET_PRICE NEXT * , CHARACTER
COST NEXT * , CHARACTER
SALES_GEOGRAPHY_DIM_KEY NEXT * , CHARACTER
value used for ROWS parameter changed from 64 to 62
Record 1: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 2: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 3: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 4: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 5: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 6: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 7: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 8: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 9: Rejected - Error on table ISSUE_FACT_TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 10: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 11: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 12: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 13: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 14: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 15: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 16: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 17: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 18: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 19: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 20: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 21: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 22: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 23: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 24: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
Record 39: Rejected - Error on table TESTLD, column DISCOUNT_AMT.
Column not found before end of logical record (use TRAILING NULLCOLS)
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table TESTLD:
0 Rows successfully loaded.
51 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 255936 bytes(62 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 51
Total logical records rejected: 51
Total logical records discarded: 0
Run began on Tue May 23 11:04:28 2006
Run ended on Tue May 23 11:04:28 2006
Elapsed time was: 00:00:00.14
CPU time was: 00:00:00.01
[oracle@casanbdb11 sql_loader]$
Here is the control file:
LOAD DATA
INFILE issue_fact.csv
REPLACE
INTO TABLE TESTLD
FIELDS TERMINATED BY ','
ISSUE_KEY,
TIME_DIM_KEY,
PRODUCT_CATEGORY_KEY,
PRODUCT_KEY,
SALES_CHANNEL_DIM_KEY,
TIME_OF_DAY_DIM_KEY,
ACCOUNT_DIM_KEY,
ESN_KEY,
DISCOUNT_DIM_KEY,
INVOICE_NUMBER,
ISSUE_QTY,
GROSS_PRICE,
DISCOUNT_AMT,
NET_PRICE,
COST,
SALES_GEOGRAPHY_DIM_KEY
)

Critical error with data load

Hello Gurus,
I was trying to load data ffrom ODS to a Cube using DTP when I got the following error:
Exceptions in Substep: End Routine - RSBK231
The database returned a value containing an error
Do you know what this error message means. It refers to a end routine and I had no syntaxt errors with the endroutine. It also worked fine with previous data loads.
Any help in this regards is appreciated.
Thanks
Rishi

Hi Rishi,
There might be some syntactical error in your end routine e.g division by a zero. This is just an example. Try running the DTP in Debug mode (you will get the option under execute tab of DTP) and see what the end routine code is doing. There might be some exception which you need to take care of.
Thanks..
Shambhu

ASO Balnak Field Fill with Data Load Rule

In block storage database I could fill a blank field with a text value by creating field with text and then replacing whole word match with preferred text. I am unable to get this to work in ASO database. Field Properties tab has the option but does not work when I try to use it. Has anyone else encountered this situation?

Hi,
Thank you both for your answers. But what confuses me is this: I created a rules file using a file with 12 columns. I selected the appropriate member for each column in Field Properties, and added the View member in the data load header. Then I get the error message: "This field is also defined in the header definition" for all fields. However, if I don't set the members in Field Properties and just set them in the data load header, I get another error message: "There is an unknown member (or no member) in the field name."
Can you please help?
Thank you!

Curve 8330 first time synch with data loaded into smartphone

With other smartphones, when I would perform my FIRST synch, if I did not take certain precautions (preset synch software to specific settings) I would wipe out all data on smartphone . Is this true for the Curve 8330? Are there specific settings so when I synch my phone for the first time with data I already loaded, I do not wipe it clean?

Hey TomPortua,
Welcome to the BlackBerry Support Community Forums.
The first synchronization does not erase the data on the BlackBerry Smartphone unless synchronization options are configured to "Replace all data in the target application", by default this is not selected if it is configured for Two way sync.
Have a look at this article for more information no configuring the Desktop software for Synchronization:
http://www.blackberry.com/btsc/KB23681
I hope this helps, cheers!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Looking for help with movie loading in a different spot every time page reloads.

Hello,
I have a Flash movie that I need to jump to a one of 6 chosen frames when say a user hits the back button or home in the site. I just dont want the same user seeing the flash movie replay in the same spot everytime they go back to home.
ANY help with this is appreciated.
Thanks ahead of time.
-Ann
Here is what I have scripted:
var numbers:Array = [2,114,415,687,960,1195,1485];
_root.firstTime = true;
if(firstTime) {
    firstTime = false;
    var frame:Number = Math.floor(Math.random() * numbers.Length);
    gotoAndPlay(numbers[frame]);
I have also tried this:
Array.prototype.shuffle = function() {
for (var ivar = this.length-1; ivar>=0; ivar--) {
var p = random(ivar+1);
var t = this[ivar];
this[ivar] = this[p];
this[p] = t;
ASSetPropFlags(Array.prototype, ["shuffle"], 1, 1);
var Array_ar:Array = new Array(2,114,415,687,960,1195,1485);
Array_ar.shuffle();
index = 0;
function load_random() {
gotoAndPlay(Array_ar[index++]);
if (index == Array_ar.length) {
(index=0);
load_random();
But this keep jumping to frame 1 each time i hit back or refresh.
Thanks again.

That did not work. It loops back to the frame that it first loaded to not to frame 1 the beginning.
It tried putting gotoAndPlay(numbers[frame]); on the very last frame, then I made a new keyframe after the very last frame and neither worked.
You can see the swf here:
http://www.shared-vision.net/testsites/edi/EDIflashtest2.html
Thank you for your help.
-Ann

Help with date code

Sry about this amount of code lines.... but i realy need help...
I must insert into a table, the date, like 10/12/2009, and the time, like 22:34:12... but, when i select the date from a datepicker, and insert the time into a text field... i got this result:
if the date inserted was 12/12/2009 and the time 22:34:12
result is.......................12/12/0922 34:12:00 <<<<< it´s getting just the two lasts number of the year and inserting the two firsts number of the time into the year, like year 0922 ....
I´m using a javascript source to create a datepicker......
and that is the procedure to insert into the table.......
PROCEDURE set_atendimento(
p_id_chamado_atendimento IN chamado_atendimento.id_chamado_atendimento%TYPE,
p_id_chamado IN chamado_atendimento.id_chamado%TYPE,
p_informacao IN chamado_atendimento.informacao%TYPE,
p_datahora_inicio IN chamado_atendimento.datahora_inicio%TYPE,
p_datahora_fim IN chamado_atendimento.datahora_fim%TYPE,
p_hora_inicio IN VARCHAR2,
p_hora_fim IN VARCHAR2
IS
v_inicio DATE;
v_fim DATE;
BEGIN
v_inicio := TO_DATE(TO_CHAR(p_datahora_inicio || p_hora_inicio), 'DD/MM/YYYY HH24:MI:SS');
v_fim := TO_DATE(TO_CHAR(p_datahora_fim || p_hora_fim), 'DD/MM/YYYY HH24:MI:SS');
UPDATE
chamado_atendimento
SET
informacao = UPPER(p_informacao)
WHERE
id_chamado_atendimento = p_id_chamado_atendimento;
IF SQL%NOTFOUND THEN
INSERT INTO
chamado_atendimento
(id_chamado_atendimento, id_chamado, id_operador, datahora_inicio, datahora_fim, informacao)
VALUES
(SEQ_CHAMADO_ATENDIMENTO.nextval, p_id_chamado, pkg_operador.get_id_operador, v_inicio, v_fim, UPPER(p_informacao));
END IF;
END;
that is the JAVASCRIPT
<script language="JavaScript" type="text/JavaScript">
$(function(){
$.datepicker.setDefaults({
showOn: 'button',
buttonImage: '/i/themes/fwsac/includes/jquery/images/calendario.gif',
buttonImageOnly: true,
closeText: 'Fechar',
prevText: '<Anterior',
nextText: 'Próximo>',
currentText: 'Hoje',
monthNames: ['Janeiro','Fevereiro','Março','Abril','Maio','Junho','Julho','Agosto','Setembro','Outubro','Novembro','Dezembro'],
monthNamesShort: ['Jan','Fev','Mar','Abr','Mai','Jun','Jul','Ago','Set','Out','Nov','Dez'],
dayNames: ['Domingo','Segunda-feira','Terça-feira','Quarta-feira','Quinta-feira','Sexta-feira','Sabado'],
dayNamesShort: ['Dom','Seg','Ter','Qua','Qui','Sex','Sab'],
dayNamesMin: ['Dom','Seg','Ter','Qua','Qui','Sex','Sab'],
dateFormat: 'dd/mm/yy',
firstDay: 0,
isRTL: false,
showAnim: 'slide'
$('#P5004_DATAHORA_INICIO , #P5004_DATAHORA_FIM').datepicker({ beforeShow: fdateRange });
function fdateRange(input){
return {
minDate: (input.id == "P5004_DATAHORA_FIM" ? $("#P5004_DATAHORA_INICIO").datepicker("getDate") : null),
maxDate: (input.id == "P5004_DATAHORA_INICIO" ? $("#P5004_DATAHORA_FIM").datepicker("getDate") : null)
</script>
what i must change to get the 4 numbers of the year and all numbers of the time and conca " || " with the date??
can someone help with this, pls??

Hello brugo,
Try this:
v_inicio := to_nchar((to_date(p_datahora_inicio || p_hora_inicio , 'DD/MM/YYYY HH24:MI:SS')), 'DD/MM/YYYY HH24:MI:SS');
v_inicio := to_nchar((to_date(p_datahora_fim || p_hora_fim , 'DD/MM/YYYY HH24:MI:SS')), 'DD/MM/YYYY HH24:MI:SS');When I substitute strings: '10/12/2009' for p_datahora_inicio and '22:30:05' for p_hora_inicio, using this format string, I get: 10/12/2009 22:30:05 as a result.
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Need some help with date

Hi everyone!
I have an application in Flex AIR and I'm having problems with dates, I could't found an example on internet until now.
I tried this for insert (database is embeded sqlite)
insertManager.parameters[":mydate"] = mydate.selectedDate.time; // type of this column is INTEGER (in my table) and store a number (milliseconds from 1/1/1970) ex: 1265079600000
Then when I need read records
mydate.selectedDate = new Date(mydateprice); //it supposed show me DD/MM/YYYY but in every case display 1/1/1970
If I replace mydateprice for mydate.selectedDate = new Date(1265079600000); // it brings me the right date
So I don't know what happed, and I'm not sure if it's the best idea to store a date in Flex AIR
I'll appreciate any help, information or example to find a solution.
Regards!
Mara.-

Thank you so much VIKASH!!! it works!!!
Now I'm trying to format this value 1265079600000 in my datagrid column:
<mx:DateFormatter id="dateFormatter" formatString="DD/MM/YYYY"/>
<mx:DataGridColumn width="140" textAlign="left" headerText="DATE" dataField="myDateColumn" labelFunction="formatDate" />
public function formatDate(item:Object,column:DataGridColumn):String
return dateFormatter.format(item.myDateColumn);
but this column appear empty....
Regards and thanks again!
Mara.-

Help with data load model

Similar Messages

Maybe you are looking for