Help with finding files

I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)

Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.

Similar Messages

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • New Mac user looking for help with Finder, Preview, Keyboard, & Dock

    So about a month ago I switched over from a lifelong Windows user to a brand new MacBook Pro, and while I am adjusting pretty well, there are still some things that I haven't quite figured out.
    First up on the list is Finder! I like my files to be arranged just like how they are in Windows Explorer--folders first alphabetically, then files alphabetically. I've managed to acquire this setting by messing around with the "clean up by" and "arrange by" functions but I don't really know the specific combination. Most of the time these preferences are saved and set as the defaults under "View Options" but every once in a while it resets and I have to tinker around with the settings all over again. Does anyone know of a way to fix this? It's only happened twice so far, but I'd rather not have it happen again. Also, occasionally when I delete an item, there is a blank space left where the icon was instead of all the files following it bumping up a space. Any quick fixes for this bug?
    Next up is Preview. Again, I like the Windows Way and I like to be able to browse between the files in a folder while using Preview/Windows Photo Viewer. I know that there is a way to browse between files if you select the whole folder and stick it in Preview, but is there a way to achieve the same result without having to do that? An app or "extension" of some sort that adds arrows in to browse between photos? I've had no luck finding anything other than the aforementioned option. Is there a good free alternative to Preview that will function similarly with the browse between photos option?
    One of my favorite things about my new Mac is the backlit keyboard function. My old laptop didn't have it and as someone who is online more often at night it is super helpful. But is there a way to turn it off during the day/in bright settings? A way to put it on a timer? In System Preferences I selected the option "Adjust keyboard brightness in low light", which I assumed to mean would have the keyboard NOT very bright when there IS light, but it continues to light up just the same. Any apps or extensions to help with this one?
    And finally, the dock! This question is more about aesthetics than functionality but help is appreciated all the same. Currently, my dock looks like this: http://i42.tinypic.com/35ktxlz.png It is rather opaque and the indicator lights can barely be seen. However, in a lot of tutorial videos I've been watching, many people have docks that look like this: http://i.i.cbsi.com/cnwk.1d/i/tim/2011/07/19/Lion_LaunchPad.png It is a darker shade of gray, the divider is dashed rather than a straight line, and the indicator lights are clearly visible. Does anybody know how to get this look for the dock? I've looked in the dock preferences but there's not really anything in there other than magnification/size/effects.
    That about sums things up! I'm sorry if any of these seem like "silly" questions but they are all things I have been unable to find answers for. Any and all tips, tricks, and help is appreciated! Thanks in advance for all your help!!

    congratulations on coming over from the dark side.
    Seems like you are interested in column view, which would show you the hierarchy of folders and files:  Column View in Mac OS X Mountain Lion - For Dummies Not sure what's going on if your finder settings don't stay put. May be a corrupted preferences file, which is easy to fix, but is perhaps a topic for another discussion.
    What I'd suggest is to have an open mind and try to see what the mac can do, rather than force it to look like your windows machine. I mean, if you just want it to look like windows, then why bother switching? If you give it a little time, you'll start to appreciate the mac way of doing things, and see how it is infinitely more awesome, powerful, creative, intuitive, and better designed (and the software way better written)  than what you left behind. But that's your call.
    There are some threads on this forum with complaints about the backlight. Keyboard backlight settings query...: Apple Support Communities  Evidently it depends on the angle of the screen and the light sensor relative to the light. Some suggest that a SMC reset may help: Intel-based Macs: Resetting the System Management Controller (SMC)  This is not an issue for me, I just adjust the brightness with the keyboard buttons if I want. Real men shift their own gears, drink their coffee black, and adjust their own keyboard brightness. I am not aware of any software to exert more control over this feature but a search of macupdate  Download Apple Mac Software & iPhone Software : MacUpdate may help. I mean, it's up to you what is important. I can waste a lot of time playing around with the GUI and with unnecessary software, or I can just get my work (and play) done.
    You might prefer the no-glass dock, that removes the shelf, and makes the indicator lights like more discrete orbs. You can do this with the terminal. Using the terminal is also, perhaps, a topic for another discussion.I like the 2D dock much better. If you want I'll give you some directions for how to do it. Otherwise, here's a reference: 2D Dock - MacRumors Forums

  • Help with Reconnecting Files

    Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
    Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
    The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
    *Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
    Many thanks for all help and suggestions.

    Homme dArs wrote:
    I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
    Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
    Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
    Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
    But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
    Thank you for your comments.

  • Need help with connecting file inputs to arrays

    In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
    That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
    Here is the original program: (view in full screen so that the code doesn't get jumbled)
    import java.io.*;       //Imports the Java library
    class progB                    //Defines class
        public static void main (String[] arguments) throws IOException
            BufferedReader keyboard;                                  //<-
            InputStreamReader reader;                                 //  Allows the program to
            reader = new InputStreamReader (System.in);               //  read the the keyboard
            keyboard = new BufferedReader (reader);                  //<-
            String name;                 //Assigns the name variable which will be parsed into...
            int newnames;               //...the integer variable for the amount of names.
            int order = 0;              //The integer variable that will be used to set the array size
            String[] array;             //Dynamic array (empty)
            System.out.println (" How many names do you want to input?");   //This will get the number that will later define the array
            name = keyboard.readLine ();
            newnames = Integer.parseInt (name);                                         // Converts the String into the Integer variable
            array = new String [newnames];                                               //This defines the size of the array
            DataInput Imp = new DataInputStream (System.in);       //Allows data to be input into the array
            String temp;                                       
            int length;                                                                  //Defines the length of the array for a loop later on
                for (order = 0 ; order < newnames ; order++)                                //<-
                {                                                                           //  Takes the inputed names and
                    System.out.println (" Please input name ");                            //  gives them a number according to
                    temp = keyboard.readLine ();                                           //  the order they were inputed in
                    array [order] = temp;                                                  //<-
                for (order = newnames - 1 ; order >= 0 ; order--)                                //<-
                {                                                                                //  Outputs the names in the reverse 
                    System.out.print (" \n ");                                                   //  order that they were inputed
                    System.out.println (" Name " + order + " is " + array [order]);             //<-
                for (order = 0 ; order < newnames ; order++)                                  //<-
                    if (array [order].startsWith ("M") || array [order].startsWith ("m"))     //  Finds and outputs any and all
                    {                                                                         //  names that begin with M or m
                        System.out.print (" \n ");                                            //
                        System.out.println (array [order] + (" starts with M or m"));         //
                    }                                                                         //<-
                for (order = 0 ; order < newnames ; order++)                                            //<-
                    length = array [order].length ();                                                   //
                    if (length >= 5)                                                                    //  Finds and outputs names
                    {                                                                                  //  with 5 or more letters
                        System.out.print (" \n ");                                                      //
                        System.out.println ("Name " + array [order] + " have 5 or more letters ");      //<-
    }The notepad file contains the following names:
    jim
    laruie
    tim
    timothy
    manny
    joseph
    matty
    amanda
    I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

    By "connect", do you just mean you want to put the names into an array?
    array[0] = "jim"
    array[1] = "laruie"
    and so on?
    That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
    What part of all that do you need help with?

  • Need help with finding "my" camera..

    I'm having difficulty finding a camera with specific features that are important for me. I would greatly appreciate any help in finding the brand and model that fits the bill. I've googled and googled, without any luck. Help!  I'm looking for a digital camera with:
    1. GPS
    2. "small" size (gotta fit in my purse, no camera bags for me!)
    3. viewfinder
    4. takes AA batteries
    TIA

    As a GPS and AA enthusiast, I too have been waiting for a similar combination.
    nuff said about GPS models like the NIkon AW100, P510, S9300 similar models using propreitary batteries.
    DSLR with AA powered grips don't fit your portability factor
    have you considered an AA powered data logger?  I use the discontinued Sony GPS-CS1.  Not only does it provide a data file to sync with my camera clock, but it also draws a breadcrumb on where I go so I can look it up on a map afterwards.

  • MOVED: need help with finding gpu for win 7

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=128552.0

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Can you help with rematching file names

    After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
    Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
    Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
    Tony

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Help with moving files

    I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
    I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
    Copy
    The operation cannot be completed because you do not have sufficient privileges for some of the items.
    OK
    From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
    Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
    With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
    I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
    Help

    You are probably better off using
    ditto
    In a terminal
    man ditto
    and read the description and instructions.
    Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well.

  • Help with referenced files and importing

    This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
    Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
    Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
    I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
    Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
    Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
    Would any or all of these issues be resolved by moving to a managed file set up?
    Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
    Any insights would be appreciated. Thanks.

    It is not as complex as you are making it.  Aperture is not per se an editor.  It is for storing and organizing, and quickly decoding RAW images.  It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
    You don't want to have your images referenced so you can also edit them with other programs.  That destroys the non destructive design of Aperture.  If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
    You need to read further as to how and why Aperture works the way it does.
    Ernie

  • Help with Exporting files in Aperture

    Hello looking for your help (first time poster)
    My problem is when I export using Aperture the file size almost triples . I Import Nikon RAW file, make my adjustments and export by using export version- TIFF original size 16bit.
    The file size in Aperture is 50mb and when I check it in photoshop the file size is 143mb this is killing my hard drive!!
    Cheers Dan.
    Message was edited by: d4an

    In either 16bit TIFF or PSD - esp if you have multiple bitmapped layers you are going to end up with big files, that is all there is to it. Are you sure you need PS to do your "tidying up" In most cases the answer is probably not depending on what "tidying up" means.
    RB

  • Help with linking files

    I have several projects with 1000's of little clips in them- that have become unlinked- normally I can just use link media and that resolves it, but it seems like there has been either name changes to them (numbering in project panel seems different) or pathway to my ext hard drive has changed-help appreciated!!!

    Are you on a Mac, or a PC?
    If PC, what OS version do you have?
    The easiest way to find out exactly how your version of Windows sets drive letters is to go to Help, then type in "drive letter," without the quotation marks in the query box. You will then get all references to drive letter, and choose Setting Drive Letter, or similar syntax. That will step you through the process, and probably even provide a link to the disc management utility for your version.
    If you are on a Mac, then it would be Volume Name, but I cannot help with anything more than that, being a PC-only guy.
    Good luck,
    Hunt

  • Help with  songs files transfer on iPod and iTouch?

    Hey guys.
    I just got an itouch recently and I need help with something but I don't really know how to describe it so I'll try my best to put it in a way for you guys to understand. Is there an option where when you plug in the iTouch into your computer, but you don't want to transfer the songs/mp3 files you already have originally on your iPod to be automatically transfer over to your itouch? Everytime when I connect the iTouch to computer it would just copy the mp3 files over to it butI don't really want that. I just want the mp3 file to stay on the iPod only.
    Thank you, QuTran

    Does it get cut off on the iPod or in iTunes (or both)?
    Does it always happen with the same songs?
    The problem may be related to the program that was used to encode those files. Do a +Get Info+ on a few of the affected songs and see if there is anything in common where is says +Encoded with+ on the Summary tab.

  • Help with linked files/ compound paths please

    Hi - I am working with an illustrator file from another designer which has a compound path with linked files - when you link a new file the image is automatically resized and clipped to the path.  I am able to edit it but i want to make my own from scratch and can't figure it out. I'm working with Illustrator CS6. Any help greatly appreciated. Thanks

    Hi Steve - thanks for the reply - my question was a bit vague as I wasn't entirely sure what I was working with but I think your point about the new linked image scaling to the same size as the existing file has helped me understand it a bit more.  What I want to know how to do is to make an entirely new file with a clipping mask that I then link an image to.  I made a file with a clipping mask on the page and then chose file>place but the image I import is not being clipped (I ticked the link option when importing it) I see it working with the existing file I'm working with but I need to know how to make a new one myself.
    If this makes it clearer here's what I want to do ...
    I am making a banner, I have 3 flat jpegs of t-shirts that I want to place on the banner without their white background.  I made a clipping mask the same shape as the outline of the t-shirt and now I want to import the jpeg so it is a linked file and is clipped by the clipping mask and so I can use it in future to import different t-shirt image in without scaling and clipping them each time.
    REally appreciate your help, thanks.

Maybe you are looking for