Help with fixed image problem

Hi!
I've used this code
sym.$("body").append(sym.$("image").css({"position":"fixed"}));
To fix an image while scrolling. But when I change the browser's window size, the image don't resize along with the rest of the animation, and worst: it appear in the wrong place. How can I solve that?
Thanks

In the method "flips()" you create a local "AffineTransform" object and you never do a transform with it.

Similar Messages

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

I need help with a browser problem

I am was given a new iMac G3 (from 2001) which was really never used.I have not yet had any serious problems with it, but really could use some help with a browser problem.
I have 4 different web browsers that needs the macro media flash player update. The browsers I use are internet explorer, iCab, Netscape, and the original Mozilla Firefox.
It would be of great appreciation for the readers of this post to answer my question.
I am also having the problem with installing the plug - ins for the browsers. Thank You For Taking the Time To read This!

Hi, rynodino -
As Tom has suggested, plugins need to be installed in the Plug-Ins folder for the browser.
Typically each browser will have its own Plug-Ins folder, usually located in the same folder containing the browser itself. In order for each of several browsers to access the same plugins, the plugins must be replicated and placed in each of the Plug-Ins folders for each of the browsers. The easy way to do that is to hold down the Option key while dragging a plugin to the new location - a copy (not an alias) of the plugin will be generated at the location it is dragged to.
Most plugins will display a Netscape icon regardless of where they are located - this is normal.
It is not unusual for the installer for a plugin to default its install to the Plug-Ins folder for Internet Explorer. So be it. Just replicate the new plugin to the other Plug-Ins folders as needed.
Note that some plugin installs will involve more than one item. For those, be sure to replicate all items for it. Using labels can help identify what is new, what has been most recently added, in a Plug-Ins folder.

I can send iMessage's but cannot receive them. Any help with fixing it?

I can send iMessage's but cannot receive them. Any help with fixing these?

Is this happening on cellular or Wi-Fi, or both?

My iPhone 4 will NOT show up on iTunes, not even by putting it into recovery mode. Can anyone help me fix this problem? I would like to use iTunes with it.

I got an iPhone 4 on Thursday.
I connected it to my PC, a Windows Vista, that day and nothing showed up besides a "camera."
My computer picked it up as a camera, which I understand is a common occurence in the iPhone.
After browsing countless youtube videos and Apple Forum Questions, nothing helped.
I put it into recovery mode by holding on the power and menu button, but when I opened iTunes it still didn't detect anything.
I feel like I'm almost hurting my iPhone because I turned it off and on so many times, and plugged it in and out several times, and so forth.
Here is what happened after putting it into recovery mode: 1. A Windows "device locator" popped up. 2. It was looking for a solution to help me with the unknown device, or iPhone. 3. I clicked onto the find solution button, and it told me that I needed a disc.
--- I didn't have a disc, so I looked up this problem and it told me to manually find Apple mobile device support on my driver, so I did.---
4. I then went onto Control Panel and clicked on SYSTEM and MAINTENANCE and went to DEVICE MANAGER.
5. There I found my iPhone listed under USB controllers.
6. I uninstalled and installed it several times.
7. I then manually found a program to ease the problem. The program was "apple mobile device support," which was located on my apple driver.
8. Nothing happened, besides it reporting to me that Apple USB was found and that "code 39" or "code 1" was in the way.
9. I didn't know what to do with this....
By this time, I was about to give up on my iPhone and return it back to the store.
I tried again, but in a different way this time.
1. I put it back into recovery mode and I opened itunes.
2. itunes reported to me that some burning or CD/Drive software was missing and that I needed to reinstall it.
3. SO, I reinstalled it several times, about 12 (iTunes), and nothing changed.
4. I then looked up the problem of why the CD/Drive software problem kept popping up.
5. I fixed it by going to my registry and adding an UpperFilter with the code GEARaspi...something like that.
6. The problem was fixed, but still no iPhone onto my itunes.
I stayed up all night last night to fix this problem...I'm annoyed and tired.
I tried another problem to fix this.
1. I didn't put it into recovery mode.
2. My iPhone showed up under portable devices under "device manager," from SYS/MAIN"
3. I did update software.
4. I clicked on "apple mobile device support" but nothing happened.
5. It reported to me of the Code thing again.
I even called the Apple people and they didn't know what to do, so I stopped calling them...because they only had limited options to fix the problem.
Can anyone help me?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Need help with an application problem - Photoshop Elements 3.0

Hi,
I wrote to an Adobe Photoshop Elements forum, but the suggestions made there have not helped solve the problem. A friend suggested that I post about it here as there are likely many of you who use the program.
I start up PSE 3 and it begins to load. When it gets to where it says that it is "building TWAIN menu items" as soon as it says that, it closes. I have put the Photoshop Elements 3.0 Settings file into the trash, emptied the trash then restarted the program (one of the suggestions from the Adobe forum) and that didn't fix the problem. I've deleted that file and uninstalled the program, restarted the computer, then reinstalled the program - and it still closes at the same point in the startup.
I bought my Mac in Dec. 2005 and bought PSE 3 at the computer store the same day, so neither is very old.
Have any of you had this problem? Any suggestions on how to fix it?
Thank you
Pearl
iMac G5 Mac OS X (10.4.5)

Thank you Rod That worked. Now, what do I do with the stuff I took out of that file?
What are the files actually called, Pearl?
The stuff in that folder will be a "TWAIN" driver or drivers for something that you connect to your computer to take images - a scanner or a camera, for example, (though not many cameras use TWAIN these days).
What brand and model of scanner or camera are you using?
The best solution in such situations is usually to download a new set of current drivers from the manufacturers web site, and install them fresh. Just stick the old ones in the trash once you have done this, and checked that it works.
Cheers
Rod

Need help with my image filter

hi guys,
so i'm making this image filter for school in Labview but can't get it to work properly, to do the filtering i'm using a formula node, which in my eyes is easier then with only labview functions.
for the C code i'm following this website: http://lodev.org/cgtutor/filtering.html
i don't copy exact every line, i'm only copying the lines i need. note that i don't use the "ColorRGB" class because it doesn't exist in a formula node, i do the filtering on a black and white image so don't really need it.
I adjusted to code so that it would work in my formula node.
if i run the vi and select the attached image file (can't attach .bmp files so i included a link for the img file) for input then it just returns the original image, which is good and also bad, good because the code works in some way but bad because it doesn't do any filtering or such.
Could anyone please look into this and give me some tips or tell me what i'm doing wrong?
and if anyone knows how to do this in RGB you are always welcome to give me tips.
used image file: http://www13.zippyshare.com/v/74810991/file.html (can't attach bmp files so i uploaded it quickly)
(btw i know there is this toolkit called vision which has many functions that could help me, but the teacher already said we can't use that)
i hope somebody can assist me in this and willing to give me some help.
Grtz Stino
Attachments:
filter.vi ‏22 KB

Darin.K wrote:
Yes there are two bugs, I found the other one first but figured if you fixed the result the other would be obvious. This is homework so only a hint:
look at what happens (and does not happen) to pixel.
the first bug was that i had to use the 'result[][]' array instead of the 'image[][]' array in my last loop, right?
the 2nd bug I really can't find :s been lookin at it for almost an hour now and trying new stuff but nothing works,
first i thought i had to put this line " result[x][y] = min(max(int((factor2 * pixel) + bias2), 0), 255);" inside the for loop above but that didn't fix my problem,
maybe the problem is in my 'imageX' and 'imageY' variable, i don't know? any more tips?
I'm sorry for being such a newb but programming isn't my strongest quality.
cedhoc wrote:
Just one more advice:
Look at the format of the "image" array. The way how to use the values from this array depends on the "image depth" parameter.
In your case, because the image is 8bit, you need to use the "colors" array containing the real RGB value.
Look at the Help for the "Read BMP File VI", you should be able to properly handle your pixels from there.
thanks for pointing that out for me, so I connect the 'totalpix' array with the 'colors' array from the image data instead of the 'image' array, that's correct right?

When the cursor hovers over an email or link it opens even though I do not want it to open. This is seriously annoying and I am ready to quit firefox. Please help me fix this problem!!!

I think my explanation is enough, the link or email opens when my cursor hovers on it I want to click any link or email I want to see not have them open automatically!!!

thx for your response. are saying websites such as hotmail and yahoo mail detect that they are being accessed via firefox and turn off the JavaScript that makes hot links? really? additionally, i have friends with firefox in which hyperlinks stay active when they are copied and pasted.
was the "Make Link" add-on you posted supposed to fix the problem? i downloaded it, but i don't know where the "context menu" is that is supposed to help me. how to i view this context window now that i have downloaded the add-on?

New GFX card, Quartz Extreme error, and suddenly FCP 6 will not run. Help me fix this problem please!

Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 3 GHz Number Of Processors: 2 Total Number Of Cores: 4 L2 Cache (per processor): 4 MB Memory: 7 GB Bus Speed: 1.33 GHz
My old GFX card nVidia GeForce 7300GT which is busted.
I replaced it with a nVidia NVIDIA Quadro FX 4500 from a Mac Pro of the same generation.
I'm now getting a Quartz Extreme error whenever I try to run Final Cut Pro 6 or Compressor. "This system does not meet the following minimum requirements: Final Cut Pro 6 requires that your system have a Quartz Extreme capable video card."
Well, I checked the specs of the card and it does support Quartz Extreme. So why isn't FCP 6 running?
Looking under the System Profiler > Graphics/Displays, it doesn't say the Cinema HD Display supports Quartz Extreme, but how could that be, because the Quadro 4500's specs online says it does?!! This was the better GFX card made for the same generation of Mac Pro but somehow doesn't work!
This is also effecting my DVD player App with an error: "A valid video device could not be found for playback: -70017". Which has never happened before either.
I've researched online and can't find anything that works.
The card has power running to it and the monitor is hooked into the closest DVI port to the logic board which most of people with the same problem have done to fix this. I've also gone into the Disk Utility and ran both Verify and Repair permissions and the same for the boot disk.
Nothing. I'm stumped. Short of trying to flash the ROM on the GFX card I'm not sure what to do. And I'm not comfortable doing that. Help please?
I'm using Final Cut Pro 6 and subsequent older versions of Motion and Compressor, not FCP X or companion series.
HELP!!!!

You should go to the Mac Pro community to get a better audience.
https://discussions.apple.com/community/desktop_computers/mac_pro

Server goes out of memory when annotating TIFF File. Help with Tiled Images

I am new to JAI and have a problem with the system going out of memory
Objective:
1)Load up a TIFF file (each approx 5- 8 MB when compressed with CCITT.6 compression)
2)Annotate image (consider it as a simple drawString with the Graphics2D object of the RenderedImage)
3)Send it to the servlet outputStream
Problem:
Server goes out of memory when 5 threads try to access it concurrently
Runtime conditions:
VM param set to -Xmx1024m
Observation
Writing the files takes a lot of time when compared to reading the files
Some more information
1)I need to do the annotating at a pre-defined specific positions on the images(ex: in the first quadrant, or may be in the second quadrant).
2)I know that using the TiledImage class its possible to load up a portion of the image and process it.
Things I need help with:
I do not know how to send the whole file back to servlet output stream after annotating a tile of the image.
If write the tiled image back to a file, or to the outputstream, it gives me only the portion of the tile I read in and watermarked, not the whole image file
I have attached the code I use when I load up the whole image
Could somebody please help with the TiledImage solution?
Thx
public void annotateFile(File file, String wText, OutputStream out, AnnotationParameter param) throws Throwable {
ImageReader imgReader = null;
ImageWriter imgWriter = null;
TiledImage in_image = null, out_image = null;
IIOMetadata metadata = null;
ImageOutputStream ios = null;
try {
Iterator readIter = ImageIO.getImageReadersBySuffix("tif");
imgReader = (ImageReader) readIter.next();
imgReader.setInput(ImageIO.createImageInputStream(file));
metadata = imgReader.getImageMetadata(0);
in_image = new TiledImage(JAI.create("fileload", file.getPath()), true);
System.out.println("Image Read!");
Annotater annotater = new Annotater(in_image);
out_image = annotater.annotate(wText, param);
Iterator writeIter = ImageIO.getImageWritersBySuffix("tif");
if (writeIter.hasNext()) {
imgWriter = (ImageWriter) writeIter.next();
ios = ImageIO.createImageOutputStream(out);
imgWriter.setOutput(ios);
ImageWriteParam iwparam = imgWriter.getDefaultWriteParam();
if (iwparam instanceof TIFFImageWriteParam) {
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
TIFFDirectory dir = (TIFFDirectory) out_image.getProperty("tiff_directory");
double compressionParam = dir.getFieldAsDouble(BaselineTIFFTagSet.TAG_COMPRESSION);
setTIFFCompression(iwparam, (int) compressionParam);
else {
iwparam.setCompressionMode(ImageWriteParam.MODE_COPY_FROM_METADATA);
System.out.println("Trying to write Image ....");
imgWriter.write(null, new IIOImage(out_image, null, metadata), iwparam);
System.out.println("Image written....");
finally {
if (imgWriter != null)
imgWriter.dispose();
if (imgReader != null)
imgReader.dispose();
if (ios != null) {
ios.flush();
ios.close();
}

user8684061 wrote:
U are right, SGA is too large for my server.
I guess oracle set SGA automaticlly while i choose default installion , but ,why SGA would be so big? Is oracle not smart enough ?Default database configuration is going to reserve 40% of physical memory for SGA for an instance, which you as a user can always change. I don't see anything wrong with that to say Oracle is not smart.
If i don't disincrease SGA, but increase max-shm-memory, would it work?This needs support from the CPU architecture (32 bit or 64 bit) and the kernel as well. Read more about the huge pages.

I have a MacBook Pro, Matshita UJ-857E while recording music my drive reported an error: Sense Key=HARDWARE ERROR Sense Code=0x03,0x01 I have no idea what this means, and now my cd burner/player won't work. can someone help me fix this problem?

Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?

tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens.

Help with partial image loss from Viewer to Canvas

Hi--I'm brand new to FCP and would really appreciate any help with my problem. I'm creating 2 second video clips composed of four still images (15 frames...or 500ms each) laid back to back, then rendered. Very simple, I know. The individual images are tiff files that look great in the FCP Viewer. But in the Canvas, part of the image is missing. Specifically, in the center of each image there should be a + sign, about 1cm square. This + should remain constant thoughout the short movie, while the items around it vary (from image to image). (This is a psychology experiment, and the center + is a fixation cross.) The problem is that in the Viewer the + sign is intact, but in the Canvas (and the resulting rendered video), only the vertical bar of the + is present! This is true for every individual tiff, and for the resulting movie. The items around the fixation cross are fine. My question is WHY on earth does the central horizontal bar get "lost" between the Viewer and the Canvas? I've read the manuals, but obviously I've got something set wrong. Also, there is a considerable overall reduction in quality between the viewer and canvas, even though I'm trying my best to maximize video quality. Everything looks a bit blurry. Truly, all ideas are welcome. Sorry if it's obvious. Thanks.
G5 Mac OS X (10.4.3)

steve, i'm viewing on my 23" cinema screen. i read up on quality and know that this is a no-no; that i should only judge quality when viewing on an ntsc monitor or good tv. the problem is that i'll ultimately be displaying these videos on my Dell LCD, so i've got to maximize what i've got. thanks to the discussion boards i have a short list of things to try now. thanks!
-heather

Help with fixed image problem

Similar Messages

Maybe you are looking for