Need help with my image filter
hi guys,
so i'm making this image filter for school in Labview but can't get it to work properly, to do the filtering i'm using a formula node, which in my eyes is easier then with only labview functions.
for the C code i'm following this website: http://lodev.org/cgtutor/filtering.html
i don't copy exact every line, i'm only copying the lines i need. note that i don't use the "ColorRGB" class because it doesn't exist in a formula node, i do the filtering on a black and white image so don't really need it.
I adjusted to code so that it would work in my formula node.
if i run the vi and select the attached image file (can't attach .bmp files so i included a link for the img file) for input then it just returns the original image, which is good and also bad, good because the code works in some way but bad because it doesn't do any filtering or such.
Could anyone please look into this and give me some tips or tell me what i'm doing wrong?
and if anyone knows how to do this in RGB you are always welcome to give me tips.
used image file: http://www13.zippyshare.com/v/74810991/file.html (can't attach bmp files so i uploaded it quickly)
(btw i know there is this toolkit called vision which has many functions that could help me, but the teacher already said we can't use that)
i hope somebody can assist me in this and willing to give me some help.
Grtz Stino
Attachments:
filter.vi 22 KB
Darin.K wrote:
Yes there are two bugs, I found the other one first but figured if you fixed the result the other would be obvious. This is homework so only a hint:
look at what happens (and does not happen) to pixel.
the first bug was that i had to use the 'result[][]' array instead of the 'image[][]' array in my last loop, right?
the 2nd bug I really can't find :s been lookin at it for almost an hour now and trying new stuff but nothing works,
first i thought i had to put this line " result[x][y] = min(max(int((factor2 * pixel) + bias2), 0), 255);" inside the for loop above but that didn't fix my problem,
maybe the problem is in my 'imageX' and 'imageY' variable, i don't know? any more tips?
I'm sorry for being such a newb but programming isn't my strongest quality.
cedhoc wrote:
Just one more advice:
Look at the format of the "image" array. The way how to use the values from this array depends on the "image depth" parameter.
In your case, because the image is 8bit, you need to use the "colors" array containing the real RGB value.
Look at the Help for the "Read BMP File VI", you should be able to properly handle your pixels from there.
thanks for pointing that out for me, so I connect the 'totalpix' array with the 'colors' array from the image data instead of the 'image' array, that's correct right?
Similar Messages
-
Need help with Color Matrix Filter.
need help. still can't find the answer. thanks in advance!
Darin.K wrote:
Yes there are two bugs, I found the other one first but figured if you fixed the result the other would be obvious. This is homework so only a hint:
look at what happens (and does not happen) to pixel.
the first bug was that i had to use the 'result[][]' array instead of the 'image[][]' array in my last loop, right?
the 2nd bug I really can't find :s been lookin at it for almost an hour now and trying new stuff but nothing works,
first i thought i had to put this line " result[x][y] = min(max(int((factor2 * pixel) + bias2), 0), 255);" inside the for loop above but that didn't fix my problem,
maybe the problem is in my 'imageX' and 'imageY' variable, i don't know? any more tips?
I'm sorry for being such a newb but programming isn't my strongest quality.
cedhoc wrote:
Just one more advice:
Look at the format of the "image" array. The way how to use the values from this array depends on the "image depth" parameter.
In your case, because the image is 8bit, you need to use the "colors" array containing the real RGB value.
Look at the Help for the "Read BMP File VI", you should be able to properly handle your pixels from there.
thanks for pointing that out for me, so I connect the 'totalpix' array with the 'colors' array from the image data instead of the 'image' array, that's correct right? -
DUKESTARS HERE, YOU KNOW YOU WANNA
Hi,
I'm designing an applet for some extra credit and I need help.
This game that i have designed is called "Digit Place Game", but there is no need for me to explain the rules.
The problem is with images.
When I start the game using 'appletviewer', it goes to the main menu:
http://img243.imageshack.us/img243/946/menuhy0.png
Which is all good.
But I decided that when you hover your cursor over one of the options such as: Two-Digits or Three-Digits, that the words that are hovered on turn green.
http://img131.imageshack.us/img131/6231/select1ch3.png
So i use the mouseMoved(MouseEvent e) from awt.event;
The problem is that when i move the mouse around the applet has thick line blotches of gray/silver demonstrated below (note: these are not exact because my print screen doesn't take a picture of the blotches)
http://img395.imageshack.us/img395/4974/annoyingmt1.png
It also lags a little bit.
I have 4 images in my image folder that's in the folder of the source code
The first one has all text blue. The second one has the first option, Two-Digits green but rest blue. The third one has the second option, Three-Digits green but rest blue, etc.
this is my code
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.event.*;
import java.awt.*;
public class DigitPlaceGame extends Applet implements MouseListener, MouseMotionListener {
public boolean load = false;
public boolean showStartUp = false;
public boolean[] hoverButton = new boolean[3];
Image load1;
Image showStartUp1;
Image showStartUp2;
Image showStartUp3;
Image showStartUp4;
public void init() {
load = true;
this.resize(501, 501);
try {
load1 = getImage(getCodeBase(), "images/load1.gif");
repaint();
} catch (Exception e) {}
load();
public void start() {
public void stop() {
public void destroy() {
public void paint(Graphics g) {
if(load == true) {
g.drawImage(load1, 0, 0, null, this);
} else if(showStartUp == true) {
if(hoverButton[0] == true) {
g.drawImage(showStartUp2, 0, 0, null, this);
} else if(hoverButton[1] == true) {
g.drawImage(showStartUp3, 0, 0, null, this);
} else if(hoverButton[2] == true) {
g.drawImage(showStartUp4, 0, 0, null, this);
} else {
g.drawImage(showStartUp1, 0, 0, null, this);
for(int i = 0; i < 3; i++) {
hoverButton[i] = false;
public void load() {
addMouseListener(this);
addMouseMotionListener(this);
showStartUp1 = getImage(getCodeBase(), "images/showStartUp1.gif");
showStartUp2 = getImage(getCodeBase(), "images/showStartUp2.gif");
showStartUp3 = getImage(getCodeBase(), "images/showStartUp3.gif");
showStartUp4 = getImage(getCodeBase(), "images/showStartUp4.gif");
showStartUp();
public void showStartUp() {
load = false;
showStartUp = true;
public void mouseClicked(MouseEvent e) {
System.out.println("test");
public void mouseMoved(MouseEvent e) {
int x = e.getX();
int y = e.getY();
if(x >= 175 && x <= 330 && y >= 200 && y <= 235) {
hoverButton[0] = true;
repaint();
} else if(x >= 175 && x <= 330 && y >= 250 && y <= 280) {
hoverButton[1] = true;
repaint();
} else if(x >= 175 && x <= 330 && y >= 305 && y <= 335) {
hoverButton[2] = true;
repaint();
} else {
for(int i = 0; i < 3; i++) {
hoverButton[i] = false;
repaint();
public void mouseEntered(MouseEvent e) {
public void mouseExited(MouseEvent e) {
public void mousePressed(MouseEvent e) {
public void mouseReleased(MouseEvent e) {
public void mouseDragged(MouseEvent e) {
}plox help me ploz, i need the extra credit for an A
can you help me demolish the lag and stop the screen from flickering? thanks!!!!!
BTW THIS IS EXTRA CREDIT NOT HOMework
DUKESTARS HERE, YOU KNOW YOU WANNA
Edited by: snoy on Nov 7, 2008 10:51 PM
Edited by: snoy on Nov 7, 2008 10:53 PMOh yes, I knew there could be some problem.......
Now try this:
boolean a,b,c;
if((a=(x >= 175 && x <= 330 && y >= 200 && y <= 235)) && !hoverButton[0]) {
hoverButton[0] = true;
repaint();
} else if((b=(x >= 175 && x <= 330 && y >= 250 && y <= 280)) && !hoverButton[1]) {
hoverButton[1] = true;
repaint();
} else if((c=(x >= 175 && x <= 330 && y >= 305 && y <= 335)) && !hoverButton[2]) {
hoverButton[2] = true;
repaint();
} else if ((!a && !b && !c)&&(hoverButton[0] || hoverButton[1] || hoverButton[2]){
for(int i = 0; i < 3; i++) {
hoverButton[i] = false;
repaint();
}hope it works........
Edited by: T.B.M on Nov 8, 2008 10:41 PM -
Need help with adding images option
I was using the add images option a few weeks ago just fine.. using my tablet and uploading the images via usb. then all of the sudden it stopped working.
please help with this issue.
DannyA few questions. What result are you experiencing? Did PS Touch crash? Have you tried to force quit-and restart PS Touch? -Guido
-
Beginner needs help with inserting images in applet.
// Name: Sachit Harish
// Name of Program: HorseRacing
// Date Started: May 15, 2003
// Date Finished: 2003
// Program Description:
import java.awt.*;
import java.applet.*;
public class HorseRacing extends Applet
// Button startGameButton;
InputField betAmountBox;
Image redHorse; //<---------//
// Button[] drawings = new Button[4];
// String[] labels = {"Face", "Cheese", "Stick", "Mashed Potatoes"};
// Method Name: init()
// Parameters Passed: None
// Data Returned: None
// Method Purpose: Where we initialise the InputBoxes and colors.
public void init()
// startGameButton=new Button("Click to Start Game");
// add(startGameButton);
/* for(int i=0; i<drawings.length; i++)
drawings=new Button (labels[i]);
add(drawings[i]);
inputBoxes();
setBackground(Color.gray); //background color
setForeground(Color.black); //input field text color
redHorse = getImage(getCodeBase(), "horse_red.GIF"); //<---------//
// Method Name: paint()
// Parameters Passed: Graphics variable screen
// Data Returned: None
// Method Purpose: Where the programs calls and collects all the methods.
// If high and low are not integers, an error message
// appears.
public void paint(Graphics screen)
//screen.drawString("HORSE RACES!!!!!", 40,60);
//startGameButton.move(50,300);
betAmountBox.setPosition(115,200);
startGame();
if(betAmountBox.isInt())
int betAmount=getBetAmount();
else
screen.drawString("ERROR: You have not entered an Integer!", 10,110);
screen.drawString(" Please correct your mistake.", 40,125);
/*int xPos=10;
int yPos=10;
for(int i=0; i<drawings.length; i++)
drawings[i].move(xPos,yPos);
xPos+=60;
screen.drawString("Click each button and get a surprise!", 10,50);*/
// Method Name: inputBoxes()
// Parameters Passed: None
// Data Returned: None
// Method Purpose: Where we initialise the inputboxes, set the size of
// the InputField and adds it to the screen. Also
// initialises the InputField to start with 1's
void inputBoxes()
betAmountBox = new InputField(5);
add(betAmountBox);
betAmountBox.initialise(50);
// Method Name: getBetAmount()
// Parameters Passed: Variable number
// Data Returned: None
// Method Purpose: Returns the variable number back to the paint()
int getBetAmount()
int betAmount=betAmountBox.toInt();
return betAmount;
// Method Name: action()
// Parameters Passed: Event variable evt, Object varible obj
// Data Returned: Variable true
// Method Purpose: This block responds when the user takes an action
// (such as hitting the return key). It causes the paint
// block to be done again
public boolean action(Event evt, Object arg)
Graphics screen=getGraphics();
if(evt.target instanceof Button)
if(arg=="Click to Start Game")
screen.clearRect(0,0,600,600);
startGame();
/*if(evt.target instanceOf Button)
if(arg=="Face")
screen.clearRect(5,55,400,400);
faceDrawing();
else if (arg=="Cheese")
screen.clearRect(5,55,400,400);
cheeseDrawing();
else if (arg=="Stick")
screen.clearRect(5,55,400,400);
stickDrawing();
else if (arg=="Mashed Potatoes")
screen.clearRect(5,55,400,400);
potatoeDrawing();
return true;
void startGame()
Graphics screen=getGraphics();
//Horse Racing Box
screen.drawRect(10,10,505,120);
screen.drawLine(60,10,60,130);
screen.drawLine(10,40,515,40);
screen.drawLine(10,70,515,70);
screen.drawLine(10,100,515,100);
screen.setColor(Color.red);
screen.fillRect(11,11,49,29);
screen.setColor(Color.yellow);
screen.fillRect(11,41,49,29);
screen.setColor(Color.blue);
screen.fillRect(11,71,49,29);
screen.setColor(Color.orange);
screen.fillRect(11,101,49,29);
screen.setColor(Color.black);
//Betting Box
screen.drawRect(10,150,280,100);
screen.drawLine(10,185,290,185);
screen.drawLine(80,150,80,185);
screen.drawLine(150,150,150,185);
screen.drawLine(220,150,220,185);
screen.setColor(Color.red);
screen.fillRect(11,151,69,34);
screen.setColor(Color.yellow);
screen.fillRect(81,151,69,34);
screen.setColor(Color.blue);
screen.fillRect(151,151,69,34);
screen.setColor(Color.orange);
screen.fillRect(221,151,69,34);
screen.setColor(Color.black);
screen.drawString("BET = ", 40,230);
screen.drawImage(redHorse, 200,200,300,300,this); //<---------//
The picture an't showing up... why? First time trying to insert images. (I made arrows where I did stuff with the image.)
-sachitBTW, ignore the buttons and stuff. I just quickly grabbed this file from an earlier button program. :p
-sachit -
Urgent - Need help with Lighting Effects Filter
Hi,
I need urgent help on something regarding the Lighting Effects filter in Adobe Photoshop CS5. I need lighting effect urgently to complete a project.
I am using Photoshop CS5 on a Windows Vista computer in 64-bit mode.
On the net it is given that you can run photoshop CS5 in 32-bit mode to use the lighting effects filter - both on Mac and PC.
My Problem:
While on the net it is given how to change from 64-bit to 32-bit and vice-versa, I have my Photoshop CS5 installed on 'E - Drive' and not on 'C - Drive' due to lack of space. I have followed all the instructions on how to open it in 32-bit mode on the net, but I still cannot use the lighting effects plugin.
What I need is if someone could give simple and clear instructions on how to open Photoshop CS5 32-bit version instead of opening the default 64-bit version on Windows Vista - that would be great.
Looking forward to answers.
Thanks.That advice about running the 32 bit version of cs5 for the Render> Lighting Effects filter
only pertains to the mac version of photoshop cs5.
The lighting effects filter does work in the 64 bit version of photoshop cs5 on windows, your
document just has to be 8 bits/channel and in the RGB Color mode (Image>Mode) same
for using the lighting effects filter in the 32 bit version of cs5.
Added: In general it's frowned upon installing photoshop on drives other than C drive.
MTSTUNER
Message was edited by: MTSTUNER -
New to AI and need help with individual images
Hi,
A client sent me her website mock up as an .eps file. I can open that in Illustrator but I'm having a hard time "grabbing" the individual images and putting them into Fireworks and then ultimately they need to make their way to Dreamweaver (I know how to do that part!)
Can I get some help on saving the individual images in the design so that I can use them again?
Thanks
DebiIt's important to note you don't have to use any other app. But if you're unfamiliar with Ai, it may be easier.
If you've got an item you can't seem to select in Ai you need to check if it's locked, the layer's panel should show a little lock next to any locked object. That's another one of those questions that's practically impossible to answer effectively without seeing the file. -
Need help with Rollover Image cross browser problem
Hello,
I am having a cross browser problem with my websites rollover nav links. The trouble is, while they work perfectly fine in IE8 and IE9, I’ve also attempted to use them through Opera, and they simply don’t work. They don’t link nor do they do their rollover effect. And I was trying to figure out what I have done wrong. Currently the site is not completed, but the first two pages are, the “news” and “about me” pages are currently (as of right now) working. The address to the site is below.
http://maxmetal.xsustudios.com/index.html
I hope that someone can help me with this, if needs be I can put the code for the CSS and HTML into this part if it will save some time for everyone. Sorry too about the PNG images, I have to change those over to semi-transparent GIF’s yet so the site does take a while to load…
Hope someone can help me with this!
PALADINWhen I disable CSS in my browser, the rollover buttons work just fine. This tells me your CSS is messed up and you've layered something over your menus which is making them inaccessible to users.
I noticed you've applied relative positioning to just about everything on your page. Why? Default CSS positioning (unspecified or static) is all you need for 98% of layouts.
Learn CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
My advice would be to start over using a pre-built CSS Template with all the divisions and columns you're likely to need for this project. Below are some good links to get you on the right track.
For professional CSS Templates that are rock solid & perform well in all browsers, visit Project Seven:
http://www.projectseven.com/products/index.htm
Ultimate Multi-Column Layouts
http://matthewjamestaylor.com/blog/ultimate-multi-column-liquid-layouts-em-and-pixel-width s
Not Just a Grid CSS Framework
http://www.notjustagrid.com/demo.asp
EZ-CSS Templates (watch the screencast to see how it works)
http://www.ez-css.org/css_templates
Dreamweaver CSS Templates for beginners
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html
New DW Starter Pages
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Good luck with your project!
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Need help with outer join filter.
Need a little help filtering a resultset and I cant seem to find a proper way to do this.
/*table*/
create table invoice( farinvc_invh_code varchar2(100),
farinvc_item varchar2(100),
farinvc_po varchar2(100)
create table po(
supplier_number varchar2(60),
supplier_invoice_no varchar2(60),
po_number varchar2(60),
run_date varchar2(60),
PO_LINE_NUMBER varchar2(60) );
/*data*/
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO_ITEM) VALUES ('I0554164', '1', 'P0142245');
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO_ITEM) VALUES ('I0554164', '3', 'P0142245');
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO) VALUES ('I0554165', '1', 'P0142246');
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO) VALUES ('I0554165', '2', 'P0142246');
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100121', '529132260', 'P0142245', '21-NOV-12', '1');
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100121', '529137831', 'P0142245', '21-NOV-12', '3');
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100121', '529137831', 'P0142245', '21-NOV-12', '2');
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100122', '145678', 'P0142246', '22-NOV-12', '1');
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100122', '145679', 'P0142246', '22-NOV-12', '2');query im executing.
SELECT farinvc_invh_code,
supplier_number,
supplier_invoice_no,
farinvc_item,
farinvc_po ,
po_number,
run_date,
PO_LINE_NUMBER
FROM INVOICE, PO
WHERE PO_NUMBER = FARINVC_PO(+)
AND FARINVC_ITEM(+) = PO_LINE_NUMBER
result
"FARINVC_INVH_CODE" "SUPPLIER_NUMBER" "SUPPLIER_INVOICE_NO" "FARINVC_ITEM" "FARINVC_PO" "PO_NUMBER" "RUN_DATE" "PO_LINE_NUMBER"
"I0554165" "914100122" "145678" "1" "P0142246" "P0142246" "22-NOV-12" "1"
"I0554165" "914100122" "145679" "2" "P0142246" "P0142246" "22-NOV-12" "2"
"I0554164" "914100121" "529132260" "1" "P0142245" "P0142245" "21-NOV-12" "1"
"I0554164" "914100121" "529137831" "3" "P0142245" "P0142245" "21-NOV-12" "3"
"" "914100121" "529137831" "" "" "P0142245" "21-NOV-12" "2" this is a much larger table and I took an excerpt in order to keep things clear and understanding. I would like to filter this result set to only show the lines that have have the po numbers are the same and line are the same but there is an extra item. in other words like such.
"FARINVC_INVH_CODE" "SUPPLIER_NUMBER" "SUPPLIER_INVOICE_NO" "FARINVC_ITEM" "FARINVC_PO" "PO_NUMBER" "RUN_DATE" "PO_LINE_NUMBER"
"I0554164" "914100121" "529132260" "1" "P0142245" "P0142245" "21-NOV-12" "1"
"I0554164" "914100121" "529137831" "3" "P0142245" "P0142245" "21-NOV-12" "3"
"" "914100121" "529137831" "" "" "P0142245" "21-NOV-12" "2"fair enough frank lets add some extra data to the tables.
for example.
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO) VALUES ('I0554167', '1', 'P0142447')
INSERT INTO "INVOICE" (FARINVC_INVH_CODE, FARINVC_ITEM, FARINVC_PO) VALUES ('I0554167', '2', 'P0142447')
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100123', 'INV1', 'P0142247', '25-NOV-12', '1')
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100123', 'INV2', 'P0142247', '25-NOV-12', '2')
INSERT INTO "PO" (SUPPLIER_NUMBER, SUPPLIER_INVOICE_NO, PO_NUMBER, RUN_DATE, PO_LINE_NUMBER) VALUES ('914100123', 'INV3', 'P0142247', '25-NOV-12', '3')if we run the query above we get
"FARINVC_INVH_CODE" "SUPPLIER_NUMBER" "SUPPLIER_INVOICE_NO" "FARINVC_ITEM" "FARINVC_PO" "PO_NUMBER" "RUN_DATE" "PO_LINE_NUMBER"
"I0554164" "914100121" "529132260" "1" "P0142245" "P0142245" "21-NOV-12" "1"
"I0554164" "914100121" "529137831" "3" "P0142245" "P0142245" "21-NOV-12" "3"
"" "914100121" "529137831" "" "" "P0142245" "21-NOV-12" "2"
"" "914100123" "INV2" "" "" "P0142247" "25-NOV-12" "2"
"" "914100123" "INV1" "" "" "P0142247" "25-NOV-12" "1"
"" "914100123" "INV3" "" "" "P0142247" "25-NOV-12" "3" where really what im trying to target is pos and lines that have a match in both tables and there is additional items from the po table that do not have have a match from the invoice table. Furthermore i would only like to see the items that are repeating invoice numbers, in other words my result here should still only be, because "SUPPLIER_INVOICE_NO" is repeating and it does find a match for the po in the invoice table but yet there is an item with the same invoice and po in the po table that does not have a match in the invoice table.
"FARINVC_INVH_CODE" "SUPPLIER_NUMBER" "SUPPLIER_INVOICE_NO" "FARINVC_ITEM" "FARINVC_PO" "PO_NUMBER" "RUN_DATE" "PO_LINE_NUMBER"
"I0554164" "914100121" "529132260" "1" "P0142245" "P0142245" "21-NOV-12" "1"
"I0554164" "914100121" "529137831" "3" "P0142245" "P0142245" "21-NOV-12" "3"
"" "914100121" "529137831" "" "" "P0142245" "21-NOV-12" "2" hope that makes sense, and thanks for working with me on this.
Edited by: mlov83 on Dec 12, 2012 5:53 AM -
Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode. -
Need Help with Formual in Filter
Hello Experts,
As part of requirement, I need to create several formulas and use them in filters.
But, stragely, some formulas are listed in the CRE Filter list whereas some are not. I'm not understanding why this is happening.
Any help would be appreciated.
Thanks in advance,
arjunFormulae containing variables and summaries can not be used in record selection.
They can be used in Group selection but these just suppress data and do not exclude it from report.
Ian -
i have been all over forums asking this question. i hope someone helps me here.
okay i purchased a template to make a website for a book.
in the unedited purchased template, on the products page, there is an image gallery.
there are four thumbnails that are just default for the template.
when i open flash cs4, and open the library panel, and scroll to where these thumbnails are located, i am having trouble replacing the images with my own.
i use photoshop to resize my images to the EXACT same size as the images that came with the template.
okay. i double click the thumbnail in the library and a window pops up that shows the thumbnail with buttons like update, import, etc.
well i click "import" so that i can replace the image with my own.
it seems to work at first. BUT....
when i click "save" in cs4 and then test movie and go to the products page, it was there and replaced, but it all acted CRAZY!! like the image would jump to the other thumbnails, or it would blink in and out and sometimes it would effect the entire template!!! what am i doing wrong? how can replace those thumbnails with my own and have it work correctly?
here is the link:
http://www.charrleslieministries.com/projects/main_v8.html then click on the products button. thanks for any help. michaelit's not likely you're going to get much help in a forum. you're problem is related to the specifics of your template and you probably don't understand how the template works.
you're best bet is to see if you can get someone to download your fla and fix it for you. -
I've got this page with a Spry collapsible panel in
it. No problems getting that to work, but I'd like to be able to
use an image in the tab and have that image 1) change on click to
expand text and then 2) change back again on collapse text. I've
got #1 figured out but can't get the image to return back to its
original state on collapse. Basically, I'm using the image as a
"show detail" "hide detail" function. HELP! I know there must be a
way to do it. Or maybe a different way than Spry. You can view the
page at
http://www.ivy-design.com/tip/people.htmlivydesign123 wrote:
>
I've got this page with a Spry collapsible panel in
it. No problems
> getting that to work, but I'd like to be able to use an
image in the tab and
> have that image 1) change on click to expand text and
then 2) change back again
> on collapse text. I've got #1 figured out but can't get
the image to return
> back to its original state on collapse. Basically, I'm
using the image as a
> "show detail" "hide detail" function. HELP! I know there
must be a way to do
> it. Or maybe a different way than Spry. You can view the
page at
>
http://www.ivy-design.com/tip/people.html
Looks like you want to use a toggle image. Try adding this to
the script block at the top of the page:
function toggleShowHideImages(imgID, personName){
var img = MM_findObj(imgID);
if(img.src.indexOf('-hide') > -1){ // if showing the
hidden image
MM_swapImage(imgID,'','images/bio-'+ personName
+'-show.jpg',1);
else{ // if showing the show image
MM_swapImage(imgID,'','images/bio-'+ personName
+'-hide.jpg',1);
Then replace the current onmousedown with:
onmousedown="toggleShowHideImages('tmShow', 'mccleary');"
Also to get better/quicker responses, you should probably
post questions that have to to with Dreamweaver and general web
issues in the Dreamweaver group:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=189&entercat= y
And ask questions that are specific to Spry in the Spry
forums:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Danilo Celic
|
http://blog.extensioneering.com/
| Adobe Community Expert -
Need help with loading images in executable Jar
Hi,
I've developed an application using netbeans that needs to load and display images.
I use netbeans Clean and Build function to create an executable Jar file. When I run the executable Jar file it runs fine but when I come to a section of the application that needs images it freezes and can't load the images.
When I then return to netbeans the part of the program that did successfully run before Clean and Build doesn't work anymore and I get an error message saying Uncaught error fetching image:
I use,
URL url = getClass().getResource("images/image1.png");
Image image1 = Toolkit.getDefaultToolkit().getImage(url);to load an image.
Can someone tell me why, when I clean and build my project to create a JAR, my images fail to load.
Should I be storing the images in a specific folder or something??
ThanksI've opened the JAR using winzip and, for some reason, the JAR hasn't preserved my file structure. So, when I try to look for an image as follows:
URL url = getClass().getResource("images/file1.png");
Image img= Toolkit.getDefaultToolkit().getImage(url);The folder doesn't exist and so it can't find the image.
Can someone tell me how to keep my file structure when I create the JAR or an alternative way to find the images within the JAR file.
Cheers -
Need help with intermittant INSO Filter problem
Hi all,
I am running Oracle 9i release 1 on Windows NT. I am using the INSO filters to convert excel spread sheets to HTML. Everything is working fine until the server has been up for about 2 hours, then I get the following error message :-
ORA-20000: Oracle Text error:
DRG-11101: failed to open file \drgit11
ORA-06512: at "CTXSYS.DRUE", line 157
ORA-06512: at "CTXSYS.CTX_DOC", line 817
ORA-06512: at "INTOUCH.HTML_CONVERSION", line 15
ORA-06512: at "INTOUCH.HTML_CONVERSION", line 30
If I reboot the server - everything then starts to work ok again. It is almost like oracle is loosing its ORACLE_HOME setting.
Has anyone seen this error before ?
Regards
Danwhat happens if you remove the battery and plug into using the adapter?
Also, may want to try and remove battery and unplug adapter and then hold down the power on switch for 30 sec. Connect the adapter and try to turn on.
Why do you suspect the power jack? is it loose or appear to be physically damaged?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit
Maybe you are looking for
-
Can't go from Bridge/Camera Raw to Photoshop Elements 8
I originally installed trial version of photoshop CS4 and photoshop elements 8. I decided I liked elements better so that is what I purchased. I did fresh install off of purchased disk. I can launch bridge from within PSE8, then camera raw from Br
-
How to make fields mandatory in Message Address for Custom Notification.
Hi Experts, We have created a new custom Notification Type and we were in the process of configuring it. I want to know, if I want to make a few fields obligatory in Message Address, can that be achieved through configurations. I am basically an ABAP
-
Hi Experts, We have to install BI (ABAP stack only) on HP UNIX HA cluster, Oracle database. Kindly suggest how to plan for it and where do we find the relevant documentations. Thanks and Regards, Amit Jana.
-
My macbook pro is very very slowly
I've got a problem here with my MACBOOK PRO MA896,it took about 10 mins to start up the newly-built system and it only manifests the sound effect without the welcome scene ,plus,drive-division operation is needed evey time the system is rebuilt and i
-
Custmer Class. field in dynamic selection of FBL5N not cming in Report
Hi, After selecting Customer Classification field in Dynamic selection of Transaction Code FBL5N and saving it and creating a Variant, this field doesnot come in output of report after execution. Can anybody send a reply on this asap. Regards Bob