Help with four Aironet 1300 with mountain in the middle

I am a novice at configuring Cisco equipment and need some pointers on what roles I would use to configure this site. The site consists of one main office, mountain top and one remote site. The main location with has a DSL connection, Server 2003 configured with DHCP, ip network 192.168.0.X and one Aironet 1300. The mountain top site has line of site to the main office and to the remote site. We have two Aironet 1300 on the mountain top site. At the remote site we have one Aironet 1300, network switch and a few pc?s. I think the Aironet at the main office needs to be the root bridge, but how should I configure the other Aironet?s? On the mountain site how would I connect the two Aironet?s together? Crossover cable? Also, I had a problem using telnet to configure the ip address on the Aironet?s at the mountain top site. I read the how to configure ip address when DHCP is disabled using HyperTerminal, but I can not get the access point to respond. At the remote site and main office I was able to configure the Aironet?s ip address to 192.168.0.180 and 192.168.0.185 and add a WEP key and a SSID. Basically the remote site needs access to the office site. Sorry for this being so long and thanks in advance. Casey

My advice is try them as two bridge connections (root and non-root). Have you tried this: http://www.cisco.com/en/US/customer/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
About cable at the mountaintop, it depends on the distance between them.
For the IP config, just put an address on bvi 1:
int bvi 1
ip address 192.168.1.1 255.255.255.0
no shut ( maybe ?)
exit
ip default-gateway 192.168.0.1 (if necessary)
That' it. Does it ping at all ? Are you trying from the ethernet connection ?

Similar Messages

When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Set up a RAID 1 with four Hard disks with DiskUtility

I have a Sonnet Fusion-500 RAID enclosure with four hard disks of 500 GB (2TB total) connected to a Power Mac G5 (2x2.3 GHz, 2GB RAM, MacOSX 10.4.8) through a Sonnet Serial ATA PCI express card (Tempo E4P model). Since I have a total capacity of 2 TB, I would like to set up a RAID 1 (mirrored) and combine the four drives in a final working volume of 1GB, (and the remaining 1GB in the mirror volume). I've been trying to setup the RAID with DiskUtility, but I cannot get a working volume of 1 GB (only 500 GB -the size of a single disc-). Can anybody please give me some help in setting up this type of RAID?
The four 500 GB discs are OK, since I can create a RAID 0 (~ 2 TB) or initialize them al individual drives without problems.
Power Mac G5 (2x2.3 GHz & 2GB RAM) Mac OS X (10.4.8)

Glad I could help.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Is anyone else having any problems with their music in your library, in the middle of all my songs I'm getting a skipping noise. Never had this problem before. Can someone help?

I have Windows Vista and last week I upgraded my iTunes, i think it's up to 11. something or other and now all my music in my iTunes library has this scratch-type noise in the middle of the song. I've never had this issue before, all my songs played wonderfully and now every song has this scratching-type noise in the middle of it. Can someone help me?

OK, after looking into the settings on "my account" on the Verizon website, it appears that "caller ID" was removed from my "features" on my line. The only reason I actually noticed this is because I have the same phone as someone else on our account, so I looked at their features and noticed mine was missing. Any idea how to get it back on there? I can't seem to figure it out.

MacBook pro screen blury with a splash of colors starting in the middle

Hi, I am a new Mac user, and I've had my macbook pro for 6 months now. Yesterday, when I started the computer, the graphics were blurry and then there was a splash of colors (rainbow of colors) covering the middle to upper part of the screen. The rest of the screen was blurry and a bit blinking.
I had been moving around with the laptop the whole but I cannot figure out what happened or what I can do to fix this.
Please help. Thanks.

Welcome to Apple Discussions!
Go to System Preferences>Universal Access and be sure the Zoom is turned off and the Enhance Contrast slider is all the way to the left. Sometimes UA features get turned on accidentally with disconcerting results.
Also, if you can, run the extended version of the Apple Hardware test. You may get a clue in the form of an error code, which could indicate a hardware problem. You should still be under the one year warranty, which should cover whatever is wrong. If UA has not been turned on accidentally, you might have a graphics chip problem or possibly a display problem which Apple would need to fix.
Good luck!

My ipod touch will not work the screen is black with a small white circle/wheel in the middle of it no matter which button i press and hold nothing happens

My ipod touch stopped working. The screen is black with a small white circle/wheel with ridges/teeth in the middle of the screen. No matter what button is pressed and/or held nothing happenes. Can anyone assist me?

Try the remaining items of:
iOS: Not responding or does not turn on
If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least and hour try again.
- If still problem time for an appointment at the Genius Bar of an Apple store.

HT1338 MacBook Pro 13.3: Desktop screen will not come up when turned on. Screen is blank except for an icon of a folder with a question mark on it, in the middle of an otherwise blank screen, laptop making a clicking noise.

My MacBook Pro 13.3 MAC OS X v10.7 laptop will not come up. Blank screen comes up, no color/desktop, etc., only an icon of a folder in the middle of the screen with a question mark on the folder. Laptop making a clicking noise. Suggestions? Thanks!

It's under warranty. Take it in to have Apple fix it.
The "flashing ?" means the machine can't find the start up disk. The clicking noise is a give away that the drive is damaged.

My mac is coming up with a white page with a picture of a file in the middle with a ? mark in and keeps flashing nothing will work ?

Hi
My daughter has a apple mac laptop. It is coming up with a white page with a file picture with a ? mark in the middle of it. It keeps flashing. Nothing will work now and we car'nt seem to work it out. Does anyone have any answers ?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

HT1351 My iphone was disconnected during a sinc and now has songs that are grey with a red circle and sqare in the middle of it. None of these songs play. tried deleting all the songs and re sincing but to no avail???

my iphone was disconnected during a sink and now many songs are grey and have a red circle with a red square in the middle, they will not play

Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

Black screen with a thick white vertical line down the middle?

I turned my iPod touch 5 off, it was at about 10%. I turned it back on a few minutes later and there was the apple logo, as usual, but with small white writing on the black background. Then, I plugged it into my charger, and the logo and writing faded away. Instead, there then was a black screen with a thick white vertical line going down the middle, and it seems to be stuck like that. What happened and how do I fix it??
Note: My home button is stuck and does not work. Also, I never updated my iPod to iOS 7.

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help trouble defaulting Aironet 1300

OK i have read through the form and found whet to do BUT i get an error
Loading "flash:/c1310-k9w7-mx.122-15.JA/c1310-k9w7-mx.122-15.JA"...#############
#####################bad mzip file, unknown zip method
Error loading "flash:/c1310-k9w7-mx.122-15.JA/c1310-k9w7-mx.122-15.JA"
Interrupt within 5 seconds to abort boot process.
Boot process terminated.
bridge:dir flash
unable to stat flash/: permission denied
Why Permisson denied
Thanks

I think you are on Bridge colon Mode.And to recover from colon mode . We have to to following troubleshooting steps.
Before reloading the new firmware , first Bridge (1310) needed to be formated.But since you cannot telnet, to access Bridge you need to access it through console.On console you will see..
bridge:
Step 1.Type format flash: on the bridge and then hit enter
Step 2. Enter the set command to assign an IP address, subnet mask, and
default gateway to the access point.
Note:-The system you are using must have tftp server recomended by
Cisco.
Also load the IOS file in the tftp server.Before step 3.
Step 3.Enter the tftp_init command to prepare the access point for TFTP
bridge: tftp_init
Step 4. Enter the tar command to load and inflate the new image from your TFTP server. The command must include this information:
the -xtract option, which inflates the image when it is loaded
the IP address of your TFTP server
the directory on the TFTP server that contains the image
the name of the image
the destination for the image (the access point Flash)

Help iPhone 5 completely black & white glow in the middle with pink lines vertically down the screen

i got my iphone 5 screen fixed, and since then the screen this is what has happend and I can't use it.

If Apple or an Authorized Apple Service Provider replaced the screen, bring it back and let them check the phone, repairs are also covered by a short warranty period.
If a 3rd party did replace the screen, you can't bring it to Apple to get it serviced, Apple does not allow others to do repairs on their devices. In that case, those who fixed the screen, have to do something about that.

IPad 2 with iOS 6 spontaneously closes apps in the middle of using them. Some wont even open they start working and then close immediately. How can I fix this?

After uploading new iOS 6 my iPad 2 randomly quits apps in the middle of using them and sometimes won't even open apps. What can I do to fix this?

1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close Apps
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

HT4061 My iPad 2 crashed when I was upgrading from 7.02 to 7.04. I have tried to reset the iPad several times, but it does not come back. It gets stuck with a screen that shows iTunes in the middle with a graphic showing the adapter cord with an arrow

What do I do now to restore without looking all my data, photos and settings?

Did you do a backup before you did the iOS update. You should always do this in case of problems. Otherwise your data/files my be lost.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

Help My Mac Pro has been crashing in the middle of editing on FCP Studio!!!!

I am working on a Mac Pro 4.1 editing an hour and a half project on FCP Studio. I keep getting a fatal error where I have to restart my computer. This is the first time this has happened. Why is it happening?

Ok Here it is
Wed Apr 17 20:04:15 2013
Machine-check capabilities (cpu 0) 0x0000000000001c09:
family: 6 model: 26 stepping: 5 microcode: 17
Intel(R) Xeon(R) CPU           E5520 @ 2.27GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
Package 1 logged:
IA32_MC8_STATUS(0x421): 0xbe0000000001009f valid
Channel number:         15 (unknown)
Memory Operation:       read
Machine-specific error: Read ECC
COR_ERR_CNT:            0
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC8_ADDR(0x422): 0x0000000114872140
IA32_MC8_MISC(0x423): 0x1a65cd0200045840
DIMM:     0
Channel: 1
Syndrome: 0x1a65cd02
panic(cpu 0 caller 0x2aaf41): Machine Check at 0x00ce8e3a, thread:0x1bc257a8, trapno:0x12, err:0x0,registers:
CR0: 0x80010033, CR2: 0x15ad418c, CR3: 0x317be000, CR4: 0x00000668
EAX: 0x00000000, EBX: 0x000004ec, ECX: 0x00000000, EDX: 0x0000009c
ESP: 0x970fab10, EBP: 0x970fab28, ESI: 0x1da5f000, EDI: 0x1c3f9000
EFL: 0x00000246, EIP: 0x00ce8e3a
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x819e18 : 0x21b837 (0x5dd7fc 0x819e4c 0x223ce1 0x0)
0x819e68 : 0x2aaf41 (0x59dfe4 0x59e0d1 0xce8e3a 0x1bc257a8)
0x819f58 : 0x2a29f2 (0x1 0x0 0x0 0x0)
0x970fab28 : 0xd062ca (0x7a6d6000 0x4ec 0x1 0x98000)
0x970faba8 : 0xd0678a (0x1b471b00 0x40 0x40000 0xb17d4000)
0x970fabf8 : 0x56d196 (0x1c3f9000 0x1da00674 0x970fae3c 0x58)
0x970fac38 : 0x56e2d8 (0xd7ed18 0x1c3f9000 0x1da00674 0x58)
0x970fac88 : 0x56eb59 (0x1c3f9000 0x5 0x970facd0 0x0)
0x970fada8 : 0x286638 (0x1c3f9000 0x5 0x1da00670 0x0)
0x970fbe58 : 0x21dbe5 (0x1da00648 0x2325c5a0 0x1fc828 0x572f)
0x970fbe98 : 0x210a86 (0x1da00600 0x0 0x1bb1d420 0x1c40b650)
0x970fbef8 : 0x216f84 (0x1da00600 0x0 0x0 0x0)
0x970fbf78 : 0x295c57 (0x1bbf44e8 0x0 0x0 0x0)
0x970fbfc8 : 0x2a256d (0x1bbf44e4 0x0 0x10 0x0)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.3.6)@0xce2000->0xd98fff
            dependency: com.apple.NVDAResman(6.3.6)@0x9f4000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x9e7000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x97a000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x9c5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
System uptime in nanoseconds: 774323014611
unloaded kexts:
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1 (addr 0x1059000, size 0x118784) - last unloaded 101395515597
loaded kexts:
com.protectmac.kext.AntiVirus          1.1.5
com.paceap.kext.pacesupport.snowleopard          5.7.2b8
com.Cycling74.driver.Soundflower          1.5.1
com.dark.iokit.dvkey          1.0.0d1
at.obdev.nke.LittleSnitch          3916
com.SiliconImage.driver.Si3124u          2.1.4
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 28973540045
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.31
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AudioAUUC          1.57
com.apple.GeForce          6.3.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelNehalemProfile          11
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.Intel82574L          2.1.8b1
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          6.3.6
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.driver.AppleUSBHIDMouse          162
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleHIDMouse          162
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOSCSIParallelFamily          2.1.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0

Help with four Aironet 1300 with mountain in the middle

Similar Messages

Maybe you are looking for