Help with going from Adobe 6.0 to Adobe 9.0

I have Adobe Acrobat 6.0 and Adobe Reader 9.0 - however, whenever I need Adobe, Adobe 6.0 is the default - any idea how to get programs to look at Adboe Reader 9.0 first?

Hi,
Try this:
Click on any PDF file
Go to properties
Then click change
And select, or, browse Adobe Acrobat Reader 9.0
Then click OK, to Apply
Phillip

Similar Messages

Need help with going from the trial version to full version

I am currently tring to download the trail version and having problems, but going to school and with my financial aid I bought the full version, but I can only get trial version.

Hi cowboy1977,
The trial version is as good as the full version the only difference being the no. of days of usage.
The trial software is good for 30 days only. If you bought the full version, simply enter the serial number in the trial version and activate it to convert it into full version.
You can launch the trial version of the software and it would prompt you to enter the serial number else, you can go to the 'Help' menu and select 'Activate' and then when prompted enter the serial number.

[SOLVED] Help with going from dhcp to static ip

So right now I'm using dhcp on my arch box, but for personal reasons (file server, print server, etc...) I'd like to assign a static ip to the machine.
I've noticed that when I get a ip via dhcp, there are different broadcast ips, and frankly, I'm just getting confused. I was wondering if there was a way (probably) to setup a static ip from setting that are retrieved via dhcp.
I know that there's a wiki page as to how to set up a static ip, but there are still some things that I don't understand, so I'd like to know what information I'd need to get from dhcp in order to set up a static ip (essentially the same ip, but it would remain the same)
I will blatantly admit that networking is not one of my strong suites...
Last edited by ZeroTruths (2009-09-03 01:20:29)

When you have a dhcp address, use ifconfig to identify the address, broadcast address, and subnet mask, and use route to identify your default gateway. All these should be added to the rc.conf NETWORKING section - an example is provided. Make a note of the nameserver address that was automatically added to /etc/resolv.conf under dhcp - it should remain there.
Before you do all that, you may have the option of using a dhcp fixed lease instead i.e. continue to use dhcp, but configure it to provide the same address to your arch box every time. That would depend on the capabilities of the system that provides the dhcp service.

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Help with tweaking blog and webform built in Adobe Muse

Hi there.
A client of mine had a 3rd party do a re-design (in Adobe Muse) of their current site in BC. Managed to get most of the re-design all launched except for a couple of tweaks that have been giving me major headaches.
Firstly, is it possible to edit the site that was built in Muse directly from BC itself and not Muse? I don't have a Muse subscription.
If so, I need help with the following that I have tried to tweak myself, but just can't find out how. BTW I am not a developer but muddle my way around editing existing code etc etc.
1. On the contact us page, I need to add an additional field to the webform. A radio button question: "preferred contact method". Phone or email. I know how to add the field to the webform in BC. Apparently Muse forms don't support radio buttons? Anyway, I can't figure out how to edit the source on the contact page to include the fields that I add to the webform.
2. Some minor tweaks to the layout of the blog page. I need to make the horizontal and vertical lines meet up and not have a space. Also, the left column width needs to be decreased and the right column width increased. Basically I need the current live blog http://www.robertsonburns.com.au/blah-blog to look like the previously coded muse blog (which is not live) http://robertsonburns-test5.businesscatalyst.com/blah.html which it does, except for these two minor issues.
Would appreciate anyone's help and/or advice.
Thanks.

Hey there,
Yes you just go to the site either via... site.buisnesscatalyst.com/admin or livesite.com/admin
Once you do that you can login. It depends how it was built though. Properly a site will have content holders and templates and the pages just hold the content. A user can go to those pages, webapps, blogs (dependng on the plan and build of the site) can edit that content.
Muse is not the best in terms of handling that and making updates, I am aware the Team updated Muse to handle fetching updates etc though but there is a note of caution on that stil though.
1. What is the plan of the site? If it is just a CC site then there is no web form manager with that plan of BC. You will have to edit and update the form built in Muse.
If it is on a plan that supports web forms it also depends on how you built it. If in Muse you should be able to just update the form in Muse I think and it posts into the system to update. If not then you need to go into the admin and web form manager and edit the html to make changes. This depends though if the form was inserted as a module, if not you need to navigate to the template or page and update it there once you have added the new fields to the form under the web form itself.
2. Layouts are managed via SFTP under the folder Layouts or in the admin under Module Templates in the main menu and Blog layouts.

Need help with adjusting Javascript code to work in Adobe Edge (Countdown)

Hello
Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
Thanks!
Mvh,
Øyvind Hermans

Hello again
I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
Is this problem also occuring when you watch the animations?
Is the countdown-code to much for the browsers to handle?
Thanks in advance for your answers.
Sincerely,
Øyvind Hermans

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

Help with download from computer to ipod touch

Is there a way to sync music that I saved on my laptop to my daughters ipod without having to pay 25.00 monthly it is just two cds i bought for her for christmas i wouldn't use the icloud match enough to justify Thank you

See if this helps:
iTunes 11 for Windows: Syncing overview
If the iPod does not apper in iTunes
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Need help with upgrade from Adobe Creative Suite to PS CS4

My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
I'm trying to reload my PS CS4. I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
When installing the upgrade, it tell me to select the product I already own. I own the educational full creative suite, but am only upgrading the Photoshop. I chose Photoshop CS and tried entering the serial number for the suite. It tells me that the serial number doesn't match the product chosen. Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
Thanks

i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect. i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers. to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago.
that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

Help with warning from Adobe

I sent a photo from Lightroom 4 to Elements. Adobe put a warning on the screen that I have intslled elements on three machines and hve 30 days to uninstal it on one of the computers. My first laptop mother board failed and it is unusable. I installed it on the replacement laptop. How can I address this issue. I would be glad to send the unusable laptop to Adobe, maybe they can fix it.

You need to contact support directly for deactivation. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
Use the link below; select Photoshop Elements in section 1; then go to Section 2.
To get help now click here for product support

Can you help me with going from iPad to iPad2?

Two questions, actually: 1) how to migrate everything on my iPad to my iPad2 when I get it, and 2) how to delete everything on my iPad so I can give it/sell it to someone else. Thanks!

You should make sure that all purchases are copied to your computer's iTunes (with the iPad connected do File > Transfer Purchases). Media (music, films, tv shows) can only be downloaded from iTunes once so you need to make sure that any content that you still want is also on your computer before you give away/sell the iPad. Apps and iBooks can be re-downloaded so there is not the same risk of losing them.
If you backup your current iPad via iTunes then you can then use that backup to restore onto the new iPad2.
To remove all your content from the current iPad then Settings > General > Reset > Erase all content and settings : (from the manual) +This resets all iPad settings to their original values and erases all your information and media+

Help with message from Photoshop Adobe Elements

Why do i get this message? t
The application has requested the Runtime to terminate it in a unusual way. It suggested me to contact the application' s support team

Hi,
That is a very generalized error message and could mean anything.
Which operating system are you running on?
Which version of Photoshop Elements are you using?
Were you working in the organizer or the editor at the time of the failure?
What were you trying to do?
If you answer those questions, we may be able to help you.
Brian

In need of help with Shockwave from experts and community please.

I have seen posts where people are having the same issue with Chrome, but I am using Windows 8 playing my FB games using Firefox. I have filled out their little "box" that they ask me to about 10 times and I am over it. I went to see if my Adobe SW was installed right, but it doesn't show anything moving. The strange thing is...I had already uninstalled it and reinstalled it the day before. I do have screen shots that I would like to share, and I am asking if anyone else is getting this same error.
***What happens is I will be playing my game and then "poof" out of nowhere the 2 tabs I had opened are gone and I am back to my desktop.
***Another issue that comes up all the time, and then the tabs will close, is that a small rectangular box will come up and it goes away so fast you don't get a chance to read it.
But as I said I have screen shots.
Everything on my computer is up to date, my husband works in the IT field and he can build a computer from the guts up. That's how I know it is not on my end. Y'all don't know how much I really do appreciate the fact that you took the time to read my post and any suggestions on how to solve this issue.
Have a very great day,
snoopyfan6200
********** As you see I am a Huge Snoopy Fan. I have about 450 items in my collection. And the 6/2/00....well that was the day my Dad passed away.********

Hi,
This is a forum for Adobe FormsCentral. Please post your questions on Flash Player forum at http://forums.adobe.com/community/flashplayer. I believe you'll get help over there.
Thanks,
Wenlan

Help converting files from vob to use in Adobe Premiere Pro

Help... I just recently purchased the Adobe Premiere Pro CS3 to use to edit some videos that I shot with the Sony DCR-DVD505. The files save as a vob file and I cannot get them to import into Adobe Premiere. I have tried several different conversion programs - but when I open them up into Adobe I have video and no sound. I have tried converting to mpg and to avi. Any suggestions or help would be greatly appreciated. I am ready to send the Adobe software back for a refund. I am extremely green at editing and this has been very frustrating.

I would not return Adobe, I would return the camera, it is not suited for editing. If you insist on editing that material and end up with pretty crappy results, play it out from a DVD player into a good tape based DV video camera thru analog in and pass it thru to firewire for capture.
To put it another way, when maximum achievable fidelity of video is 100, your camera is at 10% due to the heavy MPEG compression. You need to convert that to DV and you are left with around 8% due to DV compression, you then need to encode it again to MPEG and you end up with less than 1% out of a possible 100.

Need help with calc from tables

I have a table that contains query #1 and have another table
that contains a field that needs to use the result of the cfset in
another calc.
The new calc in query #2 needs to divide the Num_Checks_Trans
from query #1 by the by the Weekly_Hours_Recorded in query #2.
Can anyone help me figure this out?
<b>1.</b>
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>
<cfset totalTrans = 0 />
<cfloop query="QryEmployeeDetail">
<cfset totalTrans = totalTrans +
(QryEmployeeDetail.Num_Checks_Trans * QryEmployeeDetail.Value)
/></cfloop>
Text
2.
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>

This can be rewritten as a single query which is good for a
number of reasons, including we only make one trip to the database
and we do our calculations on the SQL backend, which is faster than
doing them in CFML.
What you're going to want to do is SUM() the total
transaction values by having a column like SUM(Num_Checks_Trans *
Value) AS totalTrans. To get the value for your other column you
can calculate that like Num_Checks_Trans / Weekly_Hours_Recorded. I
didn't see the latter in either of your queries so I'm not sure
where it comes from, but you can definitely use it in your SELECT
clause when calculating.
Since SUM() is an aggregate function, you'll have to use a
GROUP BY clause to make it work. You'll have to GROUP BY each
column in the SELECT statement. If some of the columns have
differing data that you won't want to use in the GROUP, you can
always use a nested subquery as part of your FROM clause and then
join that to the original queries with the totals.
I hope that helps.
- William

Help with going from Adobe 6.0 to Adobe 9.0

Similar Messages

Maybe you are looking for