Help with HP printer all-in-one C4380

hi,
Can anyone help me. My printer keeps saying that there is a paper jam. There isnt any paper in the printer. I can't get it to work.
Many thanks,
Yossi

On the printer, press the Wireless button and then select the option to restore network defaults from the main menu. Now run the downloaded driver, then click on Reconfigure Network Settings, or Add A Device, and just follow the instructions to reconnect it to your new network.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

Help with d series all in one

Need a little help with my d145 allin one changed printer heads and cartiages all i get is blue and red what to do

Most likely you have some very old #78 cartridges. The cartrdiges have a shelf life and can lose colors (usualy yellow and cyan first) if stored for years. If these are original HP cartridges check the cartridge warranty date as shown here.
If the cartridges are within their two year warranty call HP at 1-800-HPINVENt or contact your dealer for replacements. If the cartridges are beyond their warranty period then purchase a fresh cartridge.
When buying new cartridges look for the "install by" date on the package. I would look for a package with at least six months remaining before the "install by" date, which would have a year of remaining warranty.
When storing unused cartridges for an extended period keep them in a cool place and keep them upright as they would hang on a store display. This will provide maximum shelf life.
Regards,
Bob Headrick, MS MVP Printing/imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

New internet server connection with HP Photosmart All In One C4380/C4385

I recently changed internet server from ATT DSL to ATT UVERSE. Now I am having problems with my Gateway laptop connecting wirelessly with my printer. Last thing I want to do is reinstall printer since I had such a problem installing it before, we finally got it to work. (The CD packaged with my HP printer purchased 2007 I believe was wrong CD and carton printer came in shows C4385 series, but everything else says C4380). I had to go to HP website to download correct driver, etc. Now that we have changed servers, it just doesn't connect. I have to use the USB cord in order to print. I don't think it's an installation problem cause I can print with USB connected. I just can't print wirelessly. When I do try to print wirelessly, prints are hung up in que and nothing prints. Does anyone have any suggestions. I've tried tech support with ATT with absolutely no help. They told me to contact printer manufacturer.

On the printer, press the Wireless button and then select the option to restore network defaults from the main menu. Now run the downloaded driver, then click on Reconfigure Network Settings, or Add A Device, and just follow the instructions to reconnect it to your new network.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I can't print with my printer all in one. the message is err. 0xc18a0201...

I need help, please..
thanks a lot

Hi,
Try following the document below and let us know of any progress:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_uk...
If the issue persists, please clarify your printer model for any possible steps.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Recommendations for printer/all in one for use with 10.9+? Help!

Does anyone have recommendations for a printer/all-in-one that will work with Mavericks? Monochrome (b&w) laser printer/all-in-one preferred. This is for a small office (5-8 people). Frequent pdf printing and 30+ page documents.
Right now I'm looking at Brother MFC-7860DW (might need something with a larger capacity), Brother MFC-8710DW, Epson WorkForce WF-M1030 (again, may need something w/ larger capacity), and Canon Laser imageCLASS MF4770n or Canon Laser imageCLASS MF4890dw. Also have looked at Canon imageCLASS MF6160dw but reviews are iffy. Any suggestions would be greatly appreciated!!

Thanks for your help and input, diggernyc. If I was going to say that my question had been answered I certainly would have chosen your response and not my own. It seems silly that you can't undo marking a post as "solved".
If anyone has suggestions, they are still appreciated. Thanks!

I'm using windows 7 with a hp deskjet 3059A e Printer All-in-One J611n not scanning pc not found

My Deskjet 3059A e printer all-in-one J611n was working fine til my pc crashed. Now I can't get it to scan. Says computer not found & it is switched on to my pc via usb cable.... Help

Hello @terezaferreira , Welcome to the forums
I read your post about the scanning problems and I am here to help you out.
I would first suggest you restart the computer completely, and power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Now with both the printer and PC powered on, run the Print and Scan Doctor from your computer and send me a screen shot of the results or write me back with the detailed results.
Try scanning from the HP Software on your computer, and also scan from the printer to your PC. Tell me if either ways worked and what happened!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

IPod Touch conflict with HP 6500 All-in-One printer...

Does anyone know of anyone who has an iPod Touch installed with an HP all-in-one printer and running under Windows 7 64 bit? If so I'd like to hear from them and see if I can pick their brains a bit. In fact, I'd like to hear from anyone who has an iPod Touch working with an HP all-in-one on a desktop system, no matter the OS.
Originally I tried to get them to work together under a 32 bit Windows 7 Premium build on an MSI G31M3-F V2 mobo but couldn't get the iPod and the All-in-One to work together. Either the iPod wouldn't synch or the printer would disconnect.
Yesterday I started with a Windows 7 Ultimate 64 bit build on an Asus P5Q-EM mobo with just the HP 6500 All-in-One and the printer and all of its functions were working perfectly.
Then I plugged in the iPod, after having installed the newest 64 bit version of iTunes, and it detected the device but wouldn't complete the driver installation. I powered down the HP 6500 and the iPod installation completed.
I then turned the printer on and it appeared to work but the iPod wouldn't complete the sync process unless I turned the printer off.
Then I changed the drive letter of the HP all-in-one's integrated card reader from "E:" to "G:" and rebooted and it appeared that everything was working. I brought the scanner up but didn't actually scan anything but, still, no disconnect messages. Finally, success I thought. Silly me...
Today my daughter tried to send a fax from the computer. It started the scan, stopped after only partially scanning and said that the printer was disconnected.
She then rebooted and tried to scan a photo and it did essentailly the same thing -- a partial scan, froze, and then reported the printer offline.
Uninstalling the iPod Touch device resulted in the printer coming back online and all functions working perfectly.
There is clearly a conflict at the device/driver assignment level and I don't know if its even anything that I can fix.
This should not be this hard.
Has anyone any experience with the iPod Touch running on a desktop that also has an HP All-in-One device installed?

Finally installed a completely new OS and then, before doing anything else, installed iTunes and connected the iPod. Installed everything else with the HP printer being the very last thing.
Wa La... Worked as advertised...

HP1512 USB Printer All in One

My Current printer an HP 1512 works OK as a single USB printer.I would like to add this printer to my Home Network using A Print Server,the only problem I have is finding a Print Server which will work with this Printer.I am told by TP-Link that their Print Server TL-PS310U hasnt been tested with My HP 1512 all in one printer,so cannot gime me a definite answer.Has any member had any experience of TP-Link Print Servers,or could suggest any other make that would definitely work?Any help appreciated Michael

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

C1400 printer - all-in-one trouble shooting

Hello, I've recently purchased the C1400 printer - all-in-one, and it started having problems.
For some reason whenever I try to print something (for instance, a simple 1 page document), the printer activates, then prints a single page with some weird code on the top, then starts printing endless amounts of blank pages until I hit the cancel button. (?)
I'm running mac 10.5
I open to any advise - thanks.

zaq12 wrote:
printer all in one 4360 e can i kleave it on all day
Hi,
Yes, you can leave it on for whole day, it will go to sleep mode when it has nothig to do. If you wish to save a bit of electricity cost, you can turn it off when not in use.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printer (All-In-One) Suggestions

Can anyone out there give me a suggestion for a moderately priced decent printer. I got a suggestion in a Mac Store to get the Canon PIXMA 310 and the colors print horribly.
Any suggestions for one that is best compatible with Macs. All-In-One (Print/Fax/Scan) is best.

I recommend Canon models. Not sure what you consider modestly priced, but I recommend the Pixma MP610
Good choice, IMO. The MP610 is a minor refresh of the MP600, which consistently drew high praise from online reviewers (cnet.com, for example). Similarly priced HP printers do rather poorly -- and also seem to have chronic "driver issues." (I've never really looked at Epson or Lexmark.)
If you'll be using the printer's built-in SD card reader, be aware that only the latest models are likely to support the new high-capacity (4 GB and 8 GB) SDHC cards. The MP610 does, MP600 doesn't.
FYI. I'm not a Canon sales rep.
Me neither. Actually, I'm an HP shareholder.
Looby

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

MOVED: help with installing 2 os on one hd

This topic has been moved to Operating Systems.
help with installing 2 os on one hd

RedMoose:
Congratulations on installing an upgraded HDD into your PowerBook.
I am not sure exactly what happened in the formatting process, but here are some directions that should help:
Formatting, Partitioning Zeroing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD.)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Optional: (Select the sub-volume under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Select on Security Options button (Tiger) Options button (Panther & earlier).
Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Click OK.
Click Erase button
Quit Disk Utility.
Open installer and begin installation process.
Please post back with further questions, comments or an update.
Good luck.
corneius

New printer all in one

Hi everyone,
i need to buy a new printer all in one (fax and scanner) with WiFi.
I want that it's compatible with AirPrint (i have a iMac with 10.8.3). Price up to €100.
Any advice?
Thank you.

There is a great list of compatible printers at > AirPrint basics
Everyone has there favorites brand(s), mine are Epson and Canon in that order.

Help with ordering prints

Can anyone help with ordering prints for Shutterfly? I keep getting to step 4 (payment type) and then it just goes to blank page and nothing happens.

Thanks for your help, I am new to all of this. I think it was my edited pics that were the problem, they were to big of files, I had to go and save them as a new file as a jpeg and then went to shutterfly and downloaded from there. I never could get it to work from Photoshop Elem.
Date: Thu, 9 May 2013 00:51:58 -0700
From: [email protected]
To: [email protected]
Subject: Help with ordering prints
    Re: Help with ordering prints
    created by vsh07 in Photoshop Elements - View the full discussion
Looks like some problem! Just try the following steps. They worked for me: 1. Go to shutterfly website (www.shutterfly.com) and log into your account.2. In My Account Section> Billing Information, add your Credit Card details and Save.3. Logout from your account and open Photoshop Elements application to order prints.4. Now,on step4 (payment type),your Credit Card details will appear magically Let me know if this solution works for you. It can be of some help to other members too.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5304432#5304432
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5304432#5304432
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5304432#5304432. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can I use ASUS VM60-G072R Desktop (like mini Mac) with my iMac all in one computer? I need to use Windows version of QB and I don't want to buy a PC tower or laptop.

I need to use the Windows version of Quickbooks Pro and I don't want to use Parallel or buy a PC tower or laptop. Can I use ASUS VM60-G072R Desktop (like Apple Mini) with my iMac all-in-one computer?

Thank you Kappy. I guess I have to decide to purchase a separate monitor and keyboard for this mini PC computer then. And also find extra space in my office. I'm happy you answered my question so quickly.

Help with HP printer all-in-one C4380

Similar Messages

Maybe you are looking for