Help with logic on internal table

Hi SDNers,
I have 1st internal table call table it_tab with 20 fields. This table stores the data which will be passed to BDC.
I have the 2nd internal table call table it_header. At run-time this table will store the header fields to be passed to BDC.
The requirement is, when calling BDC I need to pass data from it_tab by group, each group must have the same data for the header fields. We only know which field is header field at run-time.
Because ABAP does not support delete internal table with dynamic WHERE clause so my current solution does not work.
Please let me know your idea.
Thanks,
Khanh

you may have to run some nested loops & try to find solution using Field Symbol. This is discussed many time in forum but unfortunately no direct solution.
Re: Dynamic where clause for LOOP AT internal table

Similar Messages

Logic inside internal table

hello all,
i have a requirement like this,
there are two select statements like below
select * from IFLO appending corresponding fields of table it_itab_33kv
where begru eq '006F' and fltyp eq '6'.
select * from IFLO appending corresponding fields of table it_itab_33kv
where begru eq '004F' and fltyp eq '4'.
i wanted to do some thing like this in my ALV report
serno      cost center     cost center name    no:of 33kv substations       no:of 11kv feeders
1              0402120401       xxxxx                         2                                          1
2              0402120301       xxxxx                         1                                          3
3              0402120201       xxxxx                         3                                          2
cost center wise i need to aggregate this,
how do i write my logic in internal table....
suggest me some ways....
thankq

Hi,
in the final alv grid u want to display first u sort the cost center and if you want to add the 33 kv and 11 kv feeder.use the code
data: l_grid type ref to cl_salv_table,
       lr_functions type ref to cl_salv_functions_list.
CONSTANTS: gc_true TYPE sap_bool VALUE 'X'.
sortlt_final ascending costcenter.
loop at lt_final into wa_final.
collect wa_final into lt_final.
endloop.
CALL METHOD cl_salv_table=>factory
   IMPORTING
     r_salv_table = l_grid
   CHANGING
     t_table      = lt_final.
lr_functions = l_grid->get_functions( ).
lr_functions->set_all( gc_true ).
l_grid->display( ).
hope it helps...do reward so

Problem with Emailing the Internal table data as an excel attachment

Hi Friends,
I am facing problem with Emailing an internal table data as an excel file. I am using standard function module "SO_NEW_DOCUMENT_ATT_SEND_API1" which is using SOLI structure can have record with 255 character length. But my Internal table having each record means after concatenating all the fields it is going to be morethan 450 characters. so i t is not displaying all the data in excel file.
Can somebody help me if there is any other function module or any other way that i need to follow.
thanks for help
venkat.

You must use the the :
CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB as a field seperator and
CL_ABAP_CHAR_UTILITIES=>CR_LF as a record seperator.
Check this example:
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Regards,
Naimesh Patel

With in the internal table can I READ the same internal table for a record?

With in the internal table can I READ the same internal table?
For Suppose
LOOP AT itab.
can I do as below
READ TABLE itab with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF itab-shkzg = itab-shkzg_ia.
ENDIF.
ENDLOOP.

Hi,
Yes..But use work area to differentiate..
EX.
DATA: WA LIKE ITAB.
DATA: WA_READ LIKE ITAB.
LOOP AT itab INTO WA.
can I do as below
READ TABLE itab INTO WA_READ
with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF WA-shkzg = WA_READ-shkzg_ia.
ENDIF.
ENDLOOP.
Please reward for helpful answers.
Thanks,
Naren

Selecting records from DB table with out using internal tables

hi,
i need to retrieve values from a database table based on few fields and date as well. however, i need to check whether the date is less or equal to the current date and along with that i should get the appropriate record. how can i do that with out using internal table.
field1-----date---
11111----
20070219
11111--20070214 <---
11111----
20070205
in the above scenario i should get the second record
Regards,
Kranthi.

Try:
REPORT ztest MESSAGE-ID 00.
TABLES bkpf.
SELECT * FROM bkpf
UP TO 1 ROWS
WHERE budat <= sy-datum
ORDER BY budat DESCENDING.
ENDSELECT.
Rob

The best way to get help with logic

I was posting in a thread on support for logic which appears to have been deleted. anyway, what I was going to say I think is useful info for people, so I'm going to post it anyway. to the mods - it doesn't contain any speculation about policies or anything like that. just an explanation of my views on the best way to deal with issues people have with logic, which I think is a valuable contribution to this forum.
I think there's a need for perspective. when you buy an apple product you get 90 days of free phone support to get everything working nice and neat. you can call them whenever, and you could actually keep them on the phone all day if you wanted, making them explain to you how to copy a file, install microsoft office, or any number of little questions no matter how simple - what is that red button thingy in my window for?.. on top of that, you've got a 14 day dead on arrival period (or 10 days I can't remember) in which if your machine has any kind of hardware fault whatsoever it's exchanged for a totally new one, no questions asked. a lot of people complain that applecare is overpriced.. and if you think of it just as an extended warranty, then it is a little pricey. but if you are someone that could use a lot of phone support, then it's actually potentially a total bargain. the fact that 2 or more years after you bought a computer, you could still be calling them every single day, asking for any kind of advice on how to use anything on the machine, is quite something. many people on this forum have had problems when they made the mistake of upgrading to 10.4.9 without first creating a system clone or checking first with their 3rd party plug in vendors to make sure it was ok. so, with apple care, you could call them and keep a technician on the phone _all day_ talking you through step-by-step how to back up all of your user data, how to go through and preserve your preferences and any other specific settings you might not want to lose, and then how to rollback to an earlier OS version.. they'll hold your hand through the whole thing if you need them to.
as for applecare support for pro apps like logic, I'd be the first person to agree that it's not great for anyone except beginners and first time users. if you look at what it takes to get even the highest level of logic certification, it's all pretty basic stuff. and logic doesn't exist in a vacuum, there is an entire universe of 3rd party software and hardware, as well as studio culture and advanced user techniques that are going to be totally invisible to some poor phone support guy at apple that did a logic 101. but it's not hard to see that apple are trying to promote a different kind of support culture, it's up to you to decide whether you want to buy into it or not.
the idea is that they are able to provide basic setup support for new users, including troubleshooting. because it's a simpler level of support, at least they can do this well. so there's no reason why any new user with say a new imac and logic can't get up and running with the 90 days of phone support they get for free.
but the thing is, for extremely high end pro users it's a different matter altogether. pro use of logic within the context of say, a studio or a film composition scenario is a very different world. it's almost a nonsense to imagine that apple could even hire people capable of giving useful support for this end of the spectrum, over the phone. there are so many variables, and so many things that require a very experienced studio person or in-work composer to even begin to understand the setup, let alone troubleshoot it. and it's a constantly evolving world, you actually have to be working in it and aware of developments on 3rd party fronts as well as changes in hardware.. not to mention even changes in the culture of studio production and the changed expectations that come from that. there's no way some poor little guy sitting at a help desk at apple can even hope to be privy to that kind of knowledge. it's already good enough that they don't outsource their support staff to india, let alone go out to studios and hire the very people with the skills that should be staying in the studio! not answering phones for apple.
so, given this reality.. companies have two choices. they can either offer an email based support ticket system, which others do. but in my opinion.. this can just be frustrating and only a half-solution. sure you 'feel' like you are getting a response from the people that make the software and therefore must know it.. but it's not really the case due to what I said above. DAWs don't exist in a vacuum, and so much of what you need to understand to help people requires an intimate knowledge of the music industry in which they are working. you still won't get that from steinberg, even if they sort of answer your emails. the other problem is that this kind of system can mean sporadic answers, a lot of tail-chasing, and quite often you won't get an answer that helps you in the end anyway.
the other model is to foster a strong user support culture. some people react in the wrong way to this idea.. they just think it's a big brush off from the manufacturer, saying we don't care, go sort it out yourselves.. but this isn't true. apple has a classification for pro resellers called 'apple solutions expert - audio'. what this means is that these dealers are recognised as audio specialists and they can receive extra support and training from apple for this. but more importantly than this.. most of them are music stores, or pro gear dealerships that are also mac and logic dealers. they already employ people that have worked or do work in the music industry, and are constantly on top of all of this stuff. apple encourages these dealers to run workshops, and to provide expert sales advice in the very niche area that logic is in, which they can do far better than some generic apple store ever could. but most importantly, they are encouraged to offer their own expert after-sales support and whatever other value-adding expertise they can, to get sales. because margins in computer gear are so tight nowadays, discounting is not really a viable option for these dealers to guarantee getting musicians to buy computers and logic setups from them. the only companies that can entice people with a lower price a big online wholesalers or big chain stores. so the best idea for these niche expert stores to get sales is to offer you their own experts to help with configuration, ongoing support and to generally make it a better idea that you bought your system from them rather than from some anonymous online store. I can see the wisdom of this.. it puts the support back out there on the ground where it's needed, and also where it can work best. apple could never hope to offer the same level of expertise in helping a film composer work through some issues with a specific interface or some highly specific issue they have with getting a task done. no big software manufacturer could do this anywhere near as well as people out there that have worked in studios or currently do work in studios. so in my opinion it's a far better model to foster this kind of support culture, along with training courses, books and training video support. also user forums like this one are possibly one of the most valuable ports of call anyone could ask for. apple couldn't replicate this with their own staff, even if they tried. and even if they made a system where some of the people close to logic development were able to answer emails, it would still be nowhere near as useful, as rapid or as capable of being up to speed with logic use out in the real world with 3rd pary gear, as any of these other methods are.
the only thing I think they could do better would be to publish a list of known bugs which are officially recognised. this would help everyone and put an end to a lot of wasted time and speculation on if something is a bug totally to do with logic, or if it's a specific issue raised by a particular configuration.
but really, in my view, a 3rd party support and training culture through a combination of specialist dealers, consultants that literally run a business setting up computers for pro-users and helping them keep it all working, online user-to-user forums and published materials really are the way forward.

In all honesty this is currently the 3rd "logicboard" (motherboard)
in my powerbook due to a design flaw regarding the 2nd memory slot....
Yep. Mine failed five weeks after I bought it. However, I bought it for work and couldn't afford being without it for four weeks while they fixed it, so I had to live with it. My serial number did not entitle me to a replacement either, post Applecare.
My firewire ports have burnt out from a third-party defective device (no hot-plugging involved)
My screen is blotchy (my PW serial number did not entitle me to a replacement).
My battery serial number did not entitle me to a replacement, and is not that good these days.
My guaranteed Powerbook-compatible RAM is actually not, causing RAM related problems, most notably these days meaning that as soon as I switch to battery power, the laptop crashes, so I can only use mains power. The company I bought it from stopped taking my calls and wouldn't replace it after they replaced it once, so I'm stuck with it. And of course, only one ram slot is working, so I can't even use my original stick in the first slot, which would shift the dodgy stuff away from the lower system area.
My power supply failed at the weak spot and caught fire. I managed to break apart the power supply and recable it so I didn't have to buy a new power supply, although the connection at the laptop end is loose (all the more fun that as soon as power is lost, the laptop crashes - see above). The power supply is held together with gaffa tape. Silver gaffer tape though, so it's still kind of 'Appley"...
My internal hard drive is dying - four or five times now it clicks and won't power up, causing the laptop to die.
One foot has fallen off (but glued back on).
The lid is warped.
The hinge is loosish.
The S-Video adaptor cable is intermittent.
But aside from all that, I have looked after it well, and I love it to death. Just as well, because it doesn't look like it will be that long...
But it still "just works". Apart from the battery power obviously. And the ram slot. And the ram. And the screen. And the hard drive. And the firewire ports. And the feet.
But everything apart from the main board, the screen, the case, the hard drive and the power supply works fine. So thats... er..
Hmm.

Problem with downloading the internal table onto the presentation server.

Hey folks,
I have a problem where in i am downloading one year of sales done by the company. I wrote a program to download the file onto the presentation server . The error occurs in the FM GUI_DOWNLOAD where if the file exceeds 105843504 bytes its giving me a dump saying that
When the program was running , it was established that more memory was needed than the operating system is able to safely to provide.
The current program has to be terminted because of the program already requested 105843504 bytes from the operating system with malloc when the operating system reported after further memory request that there was no more memory space available.
Could somebody provide an alternative soltuion for this.
Its really urgent as i can download the file with 70,000,000 bytes
Regards
Rock

Hi Rock,
Please download the files on to Application Server, else as suggested by Ashish download into 2 or 3 files and merge them manually.
Declare same internal tables may be 5 times.
When you fill the internal table check for a counter and when you hit a certain number stop appending to it and start appending to the next.
After you are done so download all the internal tables.
I guess this would be a good way. I am not sure if there are any ther alternative good methods.
Hope this helps.
Shreekant

Logic in internal table -- Urgent

Hi All,
I have an internal table idoc_data of structure
      DOCNUM SEGNUM SEGNAM
      3164     00001 E1STZUM -
1st idoc
      3164     00002 E1MASTM
      3164     00003 E1MARAM
      3164     00004 E1MAKTM
      3164     00005 E1STPOM -
end of 1st idoc
      3164     00006 E1STZUM -
2nd idoc
      3164     00007 E1MASTM
      3164     00008 E1MARAM
      3164     00009 E1STPOM -
end of 2nd idoc
      3164     00010 E1STZUM -
3rd idoc
      3164     00011 E1MASTM
      3164     00012 E1MARAM
      3164     00013 E1STPOM -
end of 3rd idoc
      and so on .........
"Pls note that the idocs are collected into a single idoc having same DOCNUM 3164".
I have to write a logic like this.
Loop at idoc_data.
Move the first idoc record starting from E1STZUM -
1st idoc till E1STPOM----end of 1st idoc into a temporary internal table and call master_idoc_distribute to send an idoc out.
Move the second idoc record starting from E1STZUM -
2nd idoc till E1STPOM -
end of 2nd idoc into the temporary internal table and call master_idoc_distribute to send an idoc out.
Move the third idoc like the same and so on........for the whole idocs.
There could be even more than 5000 idocs in the same structure having same idoc number.
Any help in writing the logic is really appreciated. Pls send me the whole code itself. It is an urgent reqmt. So pls do the needful.....
Thanks
Ricky

Will explain one more time.
Internal table structure
DOCNUM SEGNUM SEGNAM
3164 00001 E1STZUM -
1st idoc
3164 00002 E1MASTM
3164 00003 E1MARAM
3164 00004 E1MAKTM
3164 00005 E1STPOM
3164 00006 Z1MARZ -
end of 1st idoc (this could be more than one )
3164 00007 E1STZUM -
2nd idoc
3164 00008 E1MASTM
3164 00009 E1MARAM
3164 00010 E1STPOM
3164 00011 Z1MARZ -
end of 2nd idoc (this could be more than one)
3164 00010 E1STZUM -
start of 3rd idoc
3164 00011 E1MASTM
3164 00012 E1MARAM
3164 00013 E1STPOM
3164 00014 Z1MARZ     -
end of 3rd idoc (this could be more than one)
and so on.........
"Pls note that the idocs are collected into a single idoc having same DOCNUM 3164".
I have to write a logic like this.
Loop at idoc_data.
Move the first idoc record starting from E1STZUM -
1st idoc till Z1MARZ----end of 1st idoc into a temporary internal table and call '' FM master_idoc_distribute'' to send an idoc out.
Move the second idoc record starting from E1STZUM -
2nd idoc till Z1MARZ -
end of 2nd idoc into the temporary internal table and call FM "master_idoc_distribute" to send an idoc out.
Move the third idoc like the same and so on........for the whole idocs.
There could be even more than 5000 idocs in the same structure having same idoc number.
Any help in writing the logic is really appreciated. Pls send me the whole code itself. It is an urgent reqmt. So pls do the needful.....
Thanks

Need logic in Internal table processing

Hi all,
I have requirement like this.
i cretaed three internal tables
1) first Internal table can store total uploaded data from flat file..means line by line( Here each line is one record)
2) Second internal can store all fields which are fetched based on table which is given on selction screen.
3)now i cretaed one internal table with one variable
4) i used spilt statement on first internal table ( which store all flat file recrds) into third internal table.
so , my third internal table has first records values of first internal table in one column.
Now my probelm...i need to populate bapi structre tables with values of third internal table based on field names of second internal table. i am not able to do logic.
Is there any pointers to know soultion
Note:we know which fields values from flat values needs to populate Bapi structure table..
Thanks in advance,
regards,
JBR

check this program may be u will get the logic
*& Report ZBAPI_MATERIAL_SAVEDATA
*& PURPOSE : THIS REPORT USES BAPI MATERIAL SAVE DATA TO UPDATE AND CREATE
*& THE MATERIAL
REPORT ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
TYPES:BEGIN OF TY_MAT,
 MATERIAL(4),
 IND_SECTOR(1),
 MATL_TYPE(4),
 MATL_GROUP(9),
 BASE_UOM(3),
 BASE_UOM_ISO(3),
 PLANT(4),
 DEL_FLAG(1),
 PUR_GROUP(3),
 BASE_QTY(13),
 STGE_LOC(4),
 MRP_IND(1),
 SALES_ORG(4),
 DISTR_CHAN(2),
 DEL_FLAG1(1),
 MIN_ORDER(13),
 LANGU(2),
 MATL_DESC(40),
 END OF TY_MAT.
DATA: IT_DATA TYPE TABLE OF TY_MAT,
 WA_DATA LIKE LINE OF IT_DATA.
*decalraing flag
data: v_flag value ''.
*DECLARING WORK AREAs TO BE PASSED TO THE FUNCTION MODULE.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
 BAPI_CLIENTDATA LIKE BAPI_MARA,
 BAPI_CLIENTDATAX LIKE BAPI_MARAX,
 BAPI_PLANTDATA LIKE BAPI_MARC,
 BAPI_PLANTDATAX LIKE BAPI_MARCX,
 BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
 BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
 BAPI_SALESDATA LIKE BAPI_MVKE,
 BAPI_SALESDATAX LIKE BAPI_MVKEX,
 BAPI_MAKT LIKE BAPI_MAKT,
 BAPI_RETURN LIKE BAPIRET2.
*INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA END OF IT_MAKT.
DATA:BEGIN OF IT_RET OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA END OF IT_RET.
*INTERNAL TABLE TO HOLD HEADER DATA
DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*SELECTION-SCREEN ELEMENTS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
 P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
 P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
 P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
*DECLARATION OF EXCELAL TABLE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
PERFORM F_GET_FILE USING FNAME.
START-OF-SELECTION.
PERFORM F_XLS_ITAB USING FNAME
 CHANGING IT_EXCEL.
PERFORM F_MOVE_DATA.
perform F_GET_DATA.
*& Form F_GET_FILE
 text
 -->P_FNAME text
 <--P_SY_SUBRC text
FORM F_GET_FILE USING P_FNAME LIKE FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
CHANGING
 FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE E006(ZHNC).
ENDIF.
ENDFORM. " F_GET_FILE
*& Form F_XLS_ITAB
 text
 -->P_FNAME text
 <--P_IT_EXCEL text
FORM F_XLS_ITAB USING P_FNAME
 CHANGING P_IT_EXCEL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
 FILENAME = FNAME
 I_BEGIN_COL = P_BEGCOL
 I_BEGIN_ROW = P_BEGROW
 I_END_COL = P_ENDCOL
 I_END_ROW = P_ENDROW
TABLES
 INTERN = IT_EXCEL
EXCEPTIONS
 INCONSISTENT_PARAMETERS = 1
 UPLOAD_OLE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_XLS_ITAB
*& Form F_MOVE_DATA
 text
--> p1 text
<-- p2 text
FORM F_MOVE_DATA .
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_EXCEL BY ROW COL.
CLEAR IT_EXCEL.
LOOP AT IT_EXCEL.
MOVE IT_EXCEL-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_EXCEL-VALUE TO <FS>.
AT END OF ROW.
APPEND WA_DATA TO IT_DATA.
CLEAR WA_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " F_MOVE_DATA
*& Form F_GET_DATA
 text
--> p1 text
<-- p2 text
FORM F_GET_DATA .
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO BAPI_HEAD.
BAPI_HEAD-BASIC_VIEW ='X'.
BAPI_HEAD-SALES_VIEW ='X'.
BAPI_HEAD-PURCHASE_VIEW ='X'.
BAPI_HEAD-STORAGE_VIEW ='X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
BAPI_CLIENTDATAX-BASE_UOM = 'X'.
BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_PLANTDATAX-DEL_FLAG = 'X'.
BAPI_PLANTDATAX-PUR_GROUP = 'X'.
BAPI_PLANTDATAX-BASE_QTY = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
BAPI_SALESDATAX-MIN_ORDER = 'X'.
REFRESH IT_MAKT.
IT_MAKT-LANGU = WA_DATA-LANGU.
IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
APPEND IT_MAKT.
CLEAR IT_RET.
REFRESH IT_RET.
PERFORM F_CALL_BAPI.
READ TABLE IT_RET WITH KEY TYPE = 'S'.
IF SY-SUBRC EQ 0.
PERFORM F_BAPI_COMMIT.
WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
ELSE.
MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
*WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
*PERFORM F_DOWNLOAD.
ENDIF.
*ENDIF.
ENDLOOP.
ENDFORM. " F_GET_DATA
*& Form F_CALL_BAPI
 text
--> p1 text
<-- p2 text
FORM F_CALL_BAPI .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
 HEADDATA = BAPI_HEAD
 CLIENTDATA = BAPI_CLIENTDATA
 CLIENTDATAX = BAPI_CLIENTDATAX
 PLANTDATA = BAPI_PLANTDATA
 PLANTDATAX = BAPI_PLANTDATAX
 STORAGELOCATIONDATA = BAPI_STORAGELOCATIONDATA
 STORAGELOCATIONDATAX = BAPI_STORAGELOCATIONDATAX
 SALESDATA = BAPI_SALESDATA
 SALESDATAX = BAPI_SALESDATAX
IMPORTING
 RETURN = IT_RET
TABLES
 MATERIALDESCRIPTION = IT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
APPEND IT_RET.
ENDFORM. " F_CALL_BAPI
*& Form F_BAPI_COMMIT
 text
--> p1 text
<-- p2 text
FORM F_BAPI_COMMIT .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
ENDFORM. " F_BAPI_COMMIT

How to generate a text file with values from internal table

hi,
can anybody help me out to get the values from different internal table written into a text file.
regs,
raja

used gui_download,ws_download,cl_gui_file_save.
data: ld_filename type string ;
ld_filename = 'c:\demo.txt'.
DATA: begin of it_datatab occurs 0,
row(500) type c,
end of it_datatab.
HII
call function 'GUI_DOWNLOAD'
exporting
filename = ld_filename
filetype = 'ASC'
tables
data_tab = it_datatab[]
exceptions
file_open_error = 1
file_write_error = 2
others = 3.
gui_download

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Help with logical model

Hi, I am new to this software and need some help with a simple logical model.
Here is the task:
I need to create a model for a parking garage.
Each level can have any number of lots.
There are different types of lots (handicapped, women, regular, ...) with different Prices and Sizes.
It is important for the users and the system to know whether a lot is free or occupied.
It is crucial to assign numbers to the lots, so users can find it again.
And this is my model:
Level 1:n Lot n:1 Type
(#Level) (#Number,*Availability) (#Type,*Price,*Size)
Question:
Is it correct or would you change something? I am not quite sure whether to make availability and level an entity or an attribute of Lot.
Which data types do I need to assign each attribute? What is the difference between logical and domain?
Thanks in advance
Edited by: user13256814 on Jun 2, 2010 3:51 AM

Hi Bhaskaran,
u can see the logs correspoding to your application in the server location..
\usr\sap\<sid>\<instance_number>\j2ee\cluster\server0\
i think ur application folder will be there inside this or within one subdirectory here.
http://help.sap.com/saphelp_nw04s/helpdata/en/fe/4f5542253fb330e10000000a155106/content.htm
U can check the service entries in services file which is located in
<Drive Name>:\WINDOWS\system32\drivers\etc...
but normally in JCO Connection test , if it is not showing errors(especially MetaData) , then it means this entry is there in the services file.
Regards
Kishor Gopinathan

Need a logic for Internal table processing

Hi,
I have a requirement...an internal table contains three fields material no, bin no, and Quantity
Mat. No    |         Bin No        |              Quantity
a              |              x1         |                   10
a              |              x1         |                   10
a              |              x2         |                   20
b              |              x3         |                   10
c              |              x3         |                   20
c              |              x4         |                   30
c              |              x4         |                   40
In this I need to append the records to new internal table say itab1 where multiple entries exist for some material no like mat no 'a' and 'c' and
if the material no. exist only once in the table, it has to be moved to another new internal table say itab2.
Pls suggest some logic that does not have performance issues.
Thanks in advance
Saravana

Hi there,
a solution in brief...
data: wa_itab1_a like itab1,
         wa_itab2_b like itab1,
         lv_tabix       type sytabix.
sort itab1 by matnr.
loop at itab1.
wa_itab1_a = itab1.
at new matnr.
    lv_tabix = sy-tabix + 1.
    clear wa_itab2_b.
    READ TABLE itab1 into wa_itab2_b
                        INDEX lv_tabix.
    if wa_itab2_b-matnr ne wa_itab1_a-matnr.
      append wa_itab1_a to itab2.
      delete itab1 where matnr = wa_itab1_a-matnr.
    endif.
endat.
endloop.
Regards
George Zervas
Edited by: gzervas on Oct 20, 2010 12:08 PM

Logic for internal table

Hi,
I have an internal table with the following structure.
PO Number     PO Line Number     Quantity     ETA
PO_1     001     10     10 Aug 2009
PO_1     002     12     11 Aug 2009
PO_2     001     5     10 Aug 2009
PO_1     001     13     10 Aug 2009
PO_1     001     7     11 Aug 2009
Now I want to sum up quantity based on ETA dates so that the structure will look like as below:
PO Number     PO Line Number     Quantity     ETA
PO_1     001     23     10 Aug 2009
PO_1     001     7     11 Aug 2009
PO_1     002     12     11 Aug 2009
PO_2     001     5     10 Aug 2009
Collect statement will not work as the checking is on date but not on po no and line item.
Regards,
Abhi...

Use SUM statement for adding the quantity fields.
Sample code :
LOOP AT T INTO WA_T.
WA_N = WA_T
    SUM.
WA_N-QUANTITY = WA_T-QUANTITY.
APPEND WA_N TO ITAB_N.
ENDLOOP.

Help with Logic Pro 8 Outputs

Hi
Struggling with something that i imagine is very simple but just cant work it out! Please help me.
I will be using Logic 8 within a live environment and need to basically get various audio tracks 'out' of logic via my interface into a mixing desk. I have 8 sub outs on my interface which is fine for me. (prob lots of people do this also with a mixing desk in the studio environment for intergration with the desk and outboard gear so i 100% sure it can be done!)
Prob 1 is that the track sub outs in logic come in stereo pairs. If i want bass to go to output 1 , and kick for eg to go to output 2, how can i do this???? Is there a way to change the track outputs to mono?
Prob 2 is that if i change the outputs in one session, for example click to output 3 - 4, vocals for example to output 5 and 6, then save the session, close and reopen, they have all reverted to output 1 and 2. In a live situation it is annoying to have to change these before each song starts!
I play in a electro band that incorperates live drums, analog synths, logic audio (backing tracks kinda thing) aswell as live instruments, and finding logic pretty challenging to use for this!! We are flat broke and cant afford new stuff so have been living with it but we are now starting to need more outputs (for the benefits of live mixing , ie not giving the engineer a stereo out) . Surely the mixer in logic is capable of these totally bog standard audio routing options?!?!?
Thanks alot for any help
David

jayme Lewis wrote:
So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should).
?It's highest settings?
Do you mean the sample buffer is at 32 or 1024.
Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
Try these settings under Preferences/Audio.
I/O Buffer Size - 256
Process buffer - medium
Do NOT have the I/O Safety Buffer selected.
More info.
What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
When you open Logic's CPU meters are you seeing a single core spiking?
What effects are being used on the audio and single VI track?
pancenter-

Help with logic on internal table

Similar Messages

Maybe you are looking for