With in the internal table can I READ the same internal table for a record?

With in the internal table can I READ the same internal table?
For Suppose
LOOP AT itab.
can I do as below
READ TABLE itab with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF itab-shkzg = itab-shkzg_ia.
ENDIF.
ENDLOOP.

Hi,
Yes..But use work area to differentiate..
EX.
DATA: WA LIKE ITAB.
DATA: WA_READ LIKE ITAB.
LOOP AT itab INTO WA.
can I do as below
READ TABLE itab INTO WA_READ
with key bukrs = itab-bukrs
belnr = itab-belnr.
*and I have to compare
IF WA-shkzg = WA_READ-shkzg_ia.
ENDIF.
ENDLOOP.
Please reward for helpful answers.
Thanks,
Naren

Similar Messages

My ipad has frozen leaving candy crush, I tried to put it off using the on/off button, but now I have a black screen with no function. I can't read the serial number on the back as it is tiny.! any ideas?

My Ipad mini has frozen leaving Candy crush. I tried to put it off using the on/off button, now the screen is black with no function. I can hear Siri if I push the control. It is charged. Any ideas? I can't read the very small printed serial number on the back so can't use the Apple help as they require the serial number.

Hold down the sleep/wake button and the home button for ~10 seconds, or until the apple logo appears. This is called a reset.
HTH

What can I do for screen glare? Even outside in the shade I can't read the screen

I can't read the screen outside even in the shade. Adjusted brightness, etc. help

If glare is the problem, buy and install and anti-glare screen cover.
If brightness is the problem, you only recourse is to max your screen brightness and/or shade the screen.

I am using NI PXIe-1073 with Labview-2014.After deploying the VI how can i read the data through host computer?

sankar,new delhi

PIB. I want to read the data from the GPIB after the operation complete. I am using *opc? command, which should set the status register bit after the completion of the operation, but this is not working. How to know that the Operation is complete"-Thanks.The NI-488 global status variables ibsta, ibcnt, and iberr is what you are looking for. Look into the 4882 help file for details. Also NI-Spy, http://www.ni.com/support/gpib/nispy.htm, is a good debug util. There is a website that lists common GPIB error codes and solutions. You may check there for some things to try. You'll find the link at ni.com > Support > Troubleshooting > Installation/Getting Started > GPIB, titled "GPIB Error Codes and Common Solutions".
You could find a driver for this instrument at http://www.ni.com/devzone/idnet/default.htm . If it's not listed there, it leaves you with one of a couple options. First, I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/
We develop dri
vers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
Hope this helps.

New itunes card I got at Ralphs when I pulled the card from the backing you can't read the pin numbers. the card sould be able to be scaned to show that it is good but they wouldn't . how can I use my card now?

bought an iTune card when I took the paper off the card the glue took part of the pin numbers. The card should be able to be scaned, how can I use this card now Ralphs can't help thats were I bought the card

iTunes Store: Invalid, inactive, or illegible codes

Itunes can't read songs to sync. Every few songs Itunes stops the sync because it can't read the song.

When I sync my ipad or iphone, Itunes will start syncing but after every few songs it syncs, itunes interupts the sync with a message saying it can't read the song. I can go to that song in my list of music and play it in itunes but itunes can't read it to sync. This has just started happening in the last week, 06/28/13.
Does anyone know what is going on. The message is as follows: iTunes could not copy "such and such song" to the iphone because the file could not be read.
rhpiper

I didn't understand what you mean. Most of the songs itunes flags are songs I have had on my list for a long time. I did notice something else. After it sends me the message and stops syncing. I press the apply button and it seams to save the song. Then I have to start resyncing and I noticed it syncs the song that it just previously couldn't read. The problem is I have to do this 50 times to get through a sync. Also, Itunes never stops on the same songs that it did the prior sync.

Validation Error: We can't read the package

Hope someone has some ideas, cause I'm out.
The error (We can't Read the package) doesn't really tell me much.
I have tried to upload this package for a couple weeks and I did see some information one time about a "username" variable not being valid. I have not be able to reproduce the information about "username" for several
days.
Fishing around I did find something that might be relevant in the AppxManifest.xml with the Publisher="CN=$username$" I don't know if this should be populating or not.
Using Visual Studio 2013 update 4. (Apache Cordova Template)
This application is an HTML 5/CSS3, Bootstrap, and AngularJS. I have successfully published this application to iTunes and Google Play.
Using directions provided here.
https://msdn.microsoft.com/en-us/library/windows/apps/hh975357.aspx
Build settings "Device", "Release" and "Windows Phone Universal".
In visual studio I select PROJECT, STORE, Create app package.
WIZARD:
Yes, I want to upload to the windows phone store.
NEXT (Account looks correct )
Selecting app name. App is listed based on the account as I would expect.
Create
Config: Version Number, Architecture Neutral (Release Windows Phone Universal), Include public symbol files
File is created:CordovaApp.Phone_1.0.22.0_AnyCPU.appxupload
Run app cert Kit 3.4: "PASS"
Details: All "PASS"
UPLOAD:Validation error: We can't Read the package
Clicking "Learn More" Takes me here.
https://msdn.microsoft.com/en-us/library/windows/apps/hh923027.aspx?f=255&MSPPError=-2147217396#package_validation_error_6_1
Any thoughts or suggestions would be great...thanks in advance.

Hi Mobile Craig,
Move to publish forum for a better support. Thanks for your understanding.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
 10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

Can we read the status of a particular pin in the Parallel port(LPT1)?

Hi,
I have a Camera.I'm trying to read the status of the camera by connecting it to the parallel port.The camera has a DB26 ,high-density I/O connector .A high level on pin 19 indicates that the camera power is switched on(+5v =on ,0v=off).I want to read the status of this pin by connecting it to the parallel port.Can i read the status of a particular pin in parallel port thru LABVIEW? if so how ? Any help in this regard is appreciated.

Rajesh,
You may find the following tutorial useful:
http://zone.ni.com/devzone/conceptd.nsf/webmain/72C6FC6CE4AD4D1386256B1800794596?opendocument&node=DZ52058_US
Regards,
Khalid

I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ?

Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.

If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost.
Granted, there is no requirement to have a computer to use an iPhone.

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

I am using the Kurzweil 3000 software and before I can use Read the Web, KESIReader Firefox extension must be installed. This is not compatible with Firefox 5, how can I make your extension to work with my software?

I use the kurzweil 300 software and before I can use Read the Web I must first install the KESIReader.xpi Foxfire extension into Mozilla Foxfire however, the extension is not compatible with Mozilla Foxfire 5 which is the version installed on my computer. What can be done to make this work with Kurzweil 3000 software and the Read the Web tool?
Mozilla Firefox or Microsoft Internet Explorer 7 or 8 Web Browser.
Can you help me with the information I have provided I know the rest of the requirements are meet.

Install Firefox Portable 3.6.22 to your hard drive for that website. 
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
Product updates

How can I make the new update more colorful my mother can't read the white pages with tiny lines we hate it

How can get the color back on my iPad 2 retina my mother can not read the new white pages with tiny line or the text messages

You can go into the settings and make the fonts bigger, also in the accessibility, make the contrast better and fonts bolder.
There is also the 'invert colors' but it's not the best thing since it inverts everything.
unfortunately this doesn't seem to be a good update for those with visual issues.
http://www.apple.com/feedback/
You can let Apple know. They won't answer but at least you can be added to the talley of those that have issues.

OWB 11gR2 - Internal ERROR: Can not find the ACL containter

OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.

We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
     at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
     at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
     at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
     at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
     at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
     at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
     at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
     at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
     at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors?

With in the internal table can I READ the same internal table for a record?

Similar Messages

Maybe you are looking for