Help With Multiple WAPs & Multiple SSIDs

I just inherited a wireless LAN that is using 5 1230 WAP devices, all using a single SSID configured for 1) open authentication, 2) mandatory WPA key mgmt, 3) hex SSID key, and 4) cipher TKIP encryption. Everything works fine, but now I have to add a device to the network that only supports 13-character ASCII SSID and 128bit encryption. So I changed the settings on the 1230 closest to the new device to 1) optional WPA, 2) cipher TKIP + WEP 128bit, and then 3) created a new SSID with a 13-character ASCII key. In the web interface Association list I can see the new SSID and the device listed, but the device has no IP address and I can't ping it across the network. I've tried using a static IP and DHCP on the device (it's a Toshiba projector) and it just can't communicate with the network. Do I need to make the configuration changes to each WAP in the network? What else am I missing? Thanks!

Hi,
Its a 1231 running c1200-k9w7-mx.123-8.JEC1
Part config is as follows:-
dot11 ssid Projectors
vlan 1
authentication open mac-address mac_methods
dot11 ssid XXXXXXXXXX
vlan 3
authentication open eap eap_methods
guest-mode
nterface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 3 mode wep mandatory mic key-hash
encryption vlan 1 key 1 size 128bit 7 06061D688B874859701297485642 transmit-key
encryption vlan 1 mode wep mandatory
2 subinterfaces for the vlans are configured under FA0 and Dot1Radio 0
Error I see when debugging is that although the projector has the correct SSID etc and attempts to auth, fails due to not supporting mic key hash

Similar Messages

Help with AS3, loading multiple files into a movieclip in specific order in scrollbar

Hello! I am in need of some advice. We are trying to build a site with these features:
Our site will be built in Actionscript 3.
1. A navigation menu that, when a button is clicked, will scroll the site quickly to a specific Y position using swfaddress.
2. The entire site is controlled by a flash scroll bar, which will be scrolling a single movieclip.
    2A. The movieclip will load content corresponding to the navigation categories, all which is organized into zipped files (using this to extract the contents of each section, example: about.zip for the about         section of the site)
    2B. The movieclip will load multiple zipped files one by one that correspond to the navigation, in order, making the site appear to be very tall.
**What we are in need of is understanding how to load multiple zipped files into a movie clip, in a specific order, and having them scroll between one another through the navigation. The separate navigation categories can be in movieclips instead of zipped files if that is easier.
Here is a reference of something that works like this: http://swfc-shanghai.com/#/about/

Hello kglad! I have set aside the idea of using zipped files, and am now just using multiple external swfs that I'd like to load into the movieclip in a specific order. Any thoughts?
I'm new to AS3, and I'm attempting to create a scrolling movieclip that will load multiple external files, in order, into that movieclip. I'm using XML as well. At this point, nothing is loading into my movieclip (contentMain) and it's a bit frustrating! Thank you for your help!
Current error: 1180: Call to a possibly undefined method load.
AS3:
//XML Loader
var myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.load ("master.xml");
myXML.onLoad =function(sucess) {
   if (sucess) {
contentMain.loadAll();{
     load("1_Overview.swf")
     load("2_Webcam.swf")
     load("3_Twounion.swf")
     load("4_Oneunion.swf")
     load("5_Retail.swf")
     load("6_Nearby.swf")
     load("7_Courtyard.swf")
     load("8_Map.swf")
     load("9_Conference.swf")
     load("10_News.swf")
     load("11_Sustainability.swf")
     load("12_Contact.swf")
addEventListener("complete",onLoad)
onLoad();{
//load all
     }else {
         trace("ERROR LOADING XML");

Re: Need Help With Helpdesk w/ Multiple Sites

We thought about this, but we want one central website for all the end-users to go to. Is there any way to then (depending on what location the user sets on their ticket) to send to one of these Spiceworks sub-sites?
I was thinking about make a rule to CC# the distribution list of that IT department so they are notified that there is a new unassigned ticket. For example end user selects Florida location for their ticket on our portal, then the Florida IT distribution list is CC'd to notify them.
Or am I thinking wrongly here.

Hello,
Getting ready to move our helpdesk into primetime. We have a central server where all of our admins from around the world will be working on our tickets and we have a public facing (remote site) helpdesk where all end-users will be submitting their tickets to.
Since we have multiple locations each with their own IT staff, I would like to have end-user select their site (I already created a custom ticket attribute list for this that shows up on our public portal). Once this is done, somehow alert that IT staff that their is a ticket (maybe by sending an email to that IT's distribution list) and organize the tickets on the central helpdesk server by site.
Any help in this would benefit our company utilizing our Spiceworks helpdesk.
This topic first appeared in the Spiceworks Community

Help with icloud and multiple users in iTunes

Our family music is under my iTunes/apple id. My mother, husband and I all synch to iTunes on one computer. Can we set up multiple icloud accounts for synching our contacts separately?

Yes, that's the usual advice - everyone use the one itunes account and each user has his/her own icloud account.

Need Help with timing using multiple clips

I am in need of some help. I am trying to have a total of 16 video clips appear to slide across the screen from the right to the left, all while being equally spaced apart, going the same speed without them crossing over one another. I am using the center and anchor point in the motion tab, but once i get the the third clip i just cant seem to get the time right. I basically want them to come into the screen from the left and out of the screen from the right, all while scrolling acrossed. Please let me know if you have any suggestions.
I even trued manipulating idvd and imovie themes in Quartz Composer, ended up starting fresh and new, and then again got into the mess with timing. Please help!!!!
Thanks so much,

Try this:
Copy one clip that works OK and use Paste Attributes on the shonky one.
Al

Need help with pushview for multiple view files

Does anyone know how to create a pushview function or changeHandler function that would allow each item on a list when selected to change to a different view?
Example is that if like has 1, 2, 3 on it selecting 1 would take user to view1.mxml, selecting 2 would send user to view2.mxml, etc. I do not want to send all list items to the same view and just load different information.
Thanks!

I will check that out thanks!
In the mean time I did get the answer - see here: http://stackoverflow.com/questions/8936115/how-to-create-multiple-events-in-a-single-list- in-flex

Help with music on multiple devices

Hi,
I have all my music on my iphone from old libraries, itunes puchases, amazon purchases, etc.
I also now have all my cds imported to my work Mac. I don't really have a home computer (I have a pc that I never use and am hoping to buy a Mac at home soon).
How can I get everything in one spot? Even though I have music turned on on my icloud on my phone, I don't see anythign on my phone but old music and new purchases. Do I need to purchase the $24.99 a year option?
I'm afraid if I hook my phone up to my work computer, it will erase everythign on my phone now.
I hope this is clear. I can clarify if it isn't!
Thanks for your help!
Nicole

The only way to access your other music from iCloud is to import it all to your iTunes library on your work Mac (if that's where the music is), then subscribe to iTunes Match from that computer using your itunes Apple ID.
If you haven't synced your phone to your work computer before, the fist time you sync all your iTunes media will be erased from the phone and replaced with the iTunes media on your work computer. If you don't want to do that, don't sync with your work computer. (It can also be difficult to change to syncing with your new Mac when you get it. If you are planning on getting one for home anytime soon it would be better to wait and sync with that computer instead.)

HT5525 Help with iPhoto placing multiple orders

In iPhoto I've made 5 different cards, I want to place an order for all 5 but I can't seem to bulk order separate cards therefore would incur a separate delivery charge per order, is this correct or am I missing something here? I'm ordering 30 copies of 1 card then individual copies of the other 4 so dont want seperate orders or charges, cant seem to add an order to save my trolley then check out and pay for all in one transaction?!

No. Multiple copies of one order can be combined, but not multiple orders.

Help with xsl for multiple child node

We have the following data.
row          meID EI
1          a a1
          a2
          a3
          a4
2          b b1
          b2
3          c c1
          c2
I would like to use XSL to display the data in the fashion:
<row=1>
<meID>a</meID>
<EI>a1</EI>
<EI>a2</EI>
<EI>a3</EI>
<EI>a4</EI>
</row>
<row=2>
<meID>b</meID>
<EI>b1</EI>
<EI>b2</EI>
</row>
<row=3>
<meID>c</meID>
<EI>c1</EI>
<EI>c2</EI>
</row>
Currently, I am only able to get the XSL to lump all the EIs together:
<row=1>
<meID>a</meID>
<EI>a1a2a3a4</EI>
</row>
What do I need to change in the XSL to make it display 4 rows of EI?
Thanks.

The data should look like:
1_________a_________a1
____________________a2
____________________a3
____________________a4
2_________b_________b1
____________________b2
3_________c_________c1
____________________c2

Need help with EVENT BOOKING: option for multiple, payment (pay pal standard or pro only) add cost, etc

Hello!
I'm at my wits end: please help! It seems straight forward, and I sold my client on BC thinking this was doable in the events module, but it seems maybe not so without a ton of custom coding.
1. Book an event online,
with option for multiple (say 1-5 people at a fixed cost per person),
and checkout using only Pay Pal (standard or pro, doesn't matter, but I think Standard won't work without shopping cart).
2. The events are every day but Sunday all year long (just admission to an attraction), so is there a way to upload months in advance so they don't have to be manually entered?
I'm so grateful for any assistance.

This is all very achievable:
• Events you can add multiple people to book.
• PayPal you use use our APP that's in the BC Appstore (Liam to confirm is works with bookings)
I'm sales and marketing at Pretty, so I'm not the person to advise on how all this fits together. But I'm sure Liam can point you in the right direction.
If you need some consulting or us to do it for you just let me know [email protected]
Brett
www.prettydigital.com.au

Multiple selection in value help with Web service

Hi All,
I want to get data from web service and store in data base. I created input form with set of inputfields. For some input filds in that input form, I want to get value from web service.So I have used value help wizard. I followed below link to create value help wizard for web service.
Value help wizard working with java web service ?
While creating value help, it is only showing 'single selection' option. It does not showing any other options. Here I want to get multiple values from value help. How can I acheive this?.
Thanks,
Venkatesh R

Hi Venkat,
Try the below links for value help in visual composer.
Visual Composer: Value Help Data Service
Choosing Multiple Values within Visual Composer
http://help.sap.com/saphelp_nw04s/helpdata/en/50/91db4238bbf140e10000000a1550b0/frameset.htm
Regards
Basheer

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

Help with multiple httpservice calls

I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

Hello,
I think what Grizzzzzzzzzz means is the following:
    <mx:HTTPService id="serviceOne"
        url="here goes url"
        result="resultHandler1(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceTwo"
        url="here goes url"
        result="resultHandler2(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceThree"
        url="here goes url"
        result="resultHandler3(event);"
        fault="faultHandler(event);"/>
     // Result handler 1
     private function resultHandler1(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
         serviceTwo.send();
      // Result handler 2
      private function resultHandler2(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
          serviceThree.send();
I hope this helps,
Pierre

Help with multiple contacts with multiple phone numbers

I'm fairly new to the iPhone so thanks in advance for any help with this issue.
I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number. Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number.
I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens), the ringtone I created for that name & number helpfully lets me know who & where their calling from. It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time, but if their calling from work then I need to get back to them quickly.
This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time. My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone. Am I missing something here? I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
Thanks in advance.
Al

https://discussions.apple.com/message/18271382#18271382

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Help With Multiple WAPs & Multiple SSIDs

Similar Messages

Maybe you are looking for