Help with OAS

I am trying to setup a webserver for a PeopleSoft install on HP-UX. I have run into a number of errors and had a case with PeopleSoft. After several days I was basically told that I have to use the same ID to install OAS_Home as I do to setup the webservers for each environment. Basically my PSOFT install id has to be the same as my the ID we manage oracle applications with. This does not seem reasonable to me espcially since I have been at multiple locations that have a seperate PSFOFT owner for each environment and that would not even be possible in this scenario.
What I am hoping someone can answer is if this is really accurate information I was given. I find it hard to believe that OAS would be so much less flexible in this regard than something like WebLogic. Is anyone using OAS with PeopleSoft and have seperate IDs for the PS and OAS_Home installs?
Thanks

Rogerio S. Boaventura (guest) wrote:
: Luis Derani (guest) wrote:
: : Hello,
: : I don3t know if here is the best place to ask about OAS,
but
: i3m
: : starting to get mad with it. I have a NT 4.0 workstation
: machine
: : with 64 mb, acessing a external database (in a sun box).
Almost
: : everything works fine - the listeners and the OAS processes
: work
: : beautifully - but no matter what I try, I can3t get to make
the
: : applications run, they are always down. I already read the
docs
: : (RTFM!) and I think I did everything it says, but maybe I3m
: : missing something (after all, Oracle docs aren3t all THAT
: good).
: : Can anyone help me with this?
: : Thanks and regards to all,
: : Luis Derani
: : ([email protected])
: : Systems Analist - UOL - Brazil
: Luis,
: After creating the application and related cartridges you must
: get the listeners down and up again. The cartridges start
: automatically when called for the first time (starting
acording
: to the min value). Try to run the HelloWorld example.
: Lembranas,
: Rogerio
64M is not nearly enough memory to run OAS applications.
This may be the root of your problem.
You will need at least 128M, and that is just for starters.
If you look in your wrb.log file, you will probably see
insufficient memory type errors.
null

Similar Messages

Is OHS 10.1.3 compatible with OAS 10.1.2?

I have an existing 10.1.2 standalone OHS and 10.1.2 OAS, and an existing 10.1.3 standalone OHS and 10.1.3 OAS running on different servers. I'd like to build a new server with 10.1.2 OAS and 10.1.3 OAS on it, but with a single installion of standalone OHS in front of them. I currently have OHS standalone 10.1.3 installed, has anyone had luck with this configuration? I'm not sure if my problem is a misconfiguration or if the problem is the topology.
I have 10.1.2 OAS and 10.1.3 OHS clustered, but in the OHS I'm seeing "N/A" for the protocol for the processes, and in the oc4j-status from the web server I'm not getting any processes (if I turn on the 10.1.3 OAS of course it all works as expected).
OAS 10.1.2: opmnctl status @farm -l
-------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | memused | uptime | ports
-------------------------------------------------------------------------------------------+------
OC4J | home | 6449 | Alive | 231080160 | 40648 | 22:49:42 | ajp:12501,rmi:12401,jms:12601
OHS 10.1.3: opmnctl status @cluster -l
---------------------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | memused | uptime | ports
---------------------------------------------------------------------------------------------------------+------
OC4JGroup:OC4J | OC4J:home | 6449 | Alive | 231080160 | 40648 | 22:49:38 | N/A:12601,N/A:12401,N/A:12501
Note that the protocol is "ajp" when seen from the AS, but the web server is calling it "N/A". When I look up the /oc4j-status page for mod_oc4j it's seeing no processes:
mod_oc4j Global Configuration
hostname : newserver.domain
local instance : IAS-1
select method : Round-Robin
select affinity : None
routing mode : Static
routing ID : g_rt_id
OC4J Dynamic Routing
OC4J Static Routing
destination : instance://oas_1012.newserver.domain:home
context : /something
process :
IASPT Process List
OC4J Process List
process,ias instance,host,port,status
Any ideas? I'd love to hear if anyone has had success with this setup. I'm assuming that OHS 10.1.3 works with OAS 10.1.2, but that could be my big mistake.

Hi Walter,
I never tried your setup..But sound interesting :)
Found few of the oracle doc which will be helpful for you.
http://www.oracle.com/technetwork/middleware/ias/ohs-101310-faq-131717.pdf
From the above link
Can an OHS of Oracle Application Server 10g Release 2 (10.1.2) be used to route requests to Oracle Application Server 10g Release 3 (10.1.3.1.0) instance?
Yes. You can configure an OHS of Oracle Application Server 10g Release 2 (10.1.2) middle-tier instance to communicate with Oracle Application Server 10g Release 3 (10.1.3.1.0) instance.
http://docs.oracle.com/cd/B31017_01/core.1013/b28940/reconfig.htm#BABIEHFI
From the above link
you can use the Oracle HTTP Server from an Oracle Application Server, Release 2 (10.1.2), middle tier as the front-end for your Oracle Application Server, 10g Release 3 (10.1.3.1.0), middle tier.
Please Take a look at below MetaLink note as well.
ID:*260449.1* Everything You Wanted to Know About the Apache-Based OHS Version
Regards
FAbian

WebUtil DLL files location with OAS v10.1.2.3 with Sun Java 1.5

Question about the future Client (under MS Vista) which works with OAS.
With MS Vista on the client, the certified versions are:-
-Clientside: Sun Java 1.5_10 and above
-OAS: v10.1.2.3 (apparently to be released in March 2008)
See table and notes at
http://www.oracle.com/technology/products/forms/htdocs/10gr2/clientsod_forms10gr2.html
Our application uses Oracle Web Util 1.0.6.
When this first starts up the server attempts to copy three DLLs (jacob.dll JNIsharedstubs.dll d2kwut60.dll ) to a particular directory (eg c:\program files\oracle\J-Initiator 1.3.1.18\bin ).
This has been a problem for my company's infrastructure since that directory is not writeable for most end-users. We got round the problem by creating a script run just once by the end-user which placed the DLL files in position before application is first run. The application still tries so copy the files, and fails - but this does not matter.
In the MS Vista client envt we will have the Sun Java 1.5 client instead of the J-Initiator.
Is it clear into which directory those three DLL files will be placed with this new client-side setup?
Thanks.
Earlier related post: Webutils - controlling where jacob.dll and co are set on client
Message was edited by:
user451945

Hello Jacob,
Oracle itself can fix the WebUtil issue with downloading DLLs to an appropriate location. However, there's more to running a Forms application on Vista - some of which Sun needs to find a solution for:
If Vista's User Account Control (UAC) feature is activated - which it is by default and which provides additional security compared to XP - Internet Explorer runs in protected mode, i.e. the iexplore.exe process is started with a LOW integrity level. In Vista every securable operating system "object" is assigned an integrity level - process, files, directories etc. each have an integrity level which can have the values low, normal / user, high / administrator or system. Every process started by a normal user will be assigned normal / user integrity level on process creation and thus is able to access all the files to which the user has access rights. The exception to the rule is Internet Explorer which is started with a low integrity level so if any malware / Javascript / IE extension takes control over Internet Explorer it cannot access any files or directories outside of its low integrity level "jail" because process with a lower integrity level aren't allowed to access any objects which have a higher integrity level. This means any program - including the Java plugin and any applet whether signed or not - which runs inside the iexplore.exe process cannot communicate with any process the user started (think about WebUtil's OLE2 to communicate with Office applications) and it cannot download any files to a user-specified directory (think of WebUtil's download features or even client_textio). Furthermore any processes you start e.g. through WebUtil's client_host command will inherit IE's low process integrity level and thus will not be able to do anything meaningful either. The same goes for your own DLLs which run within iexplore.exe.
Java 1.6 Update N will change the Java plugin architecture so that the Java runtime will execute in its own process with a normal / user integrity level and communicate with Internet Explorer via IPC instead of running within the internet explorer process. If you need more information look at the early access release of Update N:
https://jdk6.dev.java.net/6uNea.html#Overview
I think it would help if you also opened an SR so Oracle support knows there are more customers waiting for a solution.
Best regard
Andreas
Message was edited by:
leidner

Generate URL with oas,oapc and ti

Hi all,
I am trying to generate a url with oas oapc and ti and pass to javascript for navigating back to that page. When I don't give these parameters I Get the error as You are trying to access a page that is no longer active.- The referring page may have come from a previous session. Please select Home to proceed.
I used some function createURL or something to do this before. But now I totally just cant get this work.
Can someone pls help?
Thanks in advance.

Please update your exact requirement in the post.
What you need? Why you need?
don't mention "ti" parameter in the URL,
BTW, what value you are passing in this?
Are you aware of the importance of this parameter?
-Prince
[email protected]
http://princekapoor82.blogspot.com

Combining APEX help with a frame-like TOC html help system (I used DITA)

Problem:
The APEX page-oriented help system is bad at helping users find how to do something. I prefer to use a task-oriented help system for that, with a table of contents that users can browse around in. I like the DITA (Darwin Information Typing Architecture) system's topic based help with its ideas of tasks, concepts and references. But, I also like the context-based feel of a page-based help system and the way that the APEX help system automatically aggregates all of the item-based help on a page for you.
My Solution:
I'm no html genius, so this may be totally wrong, but what I did was to create a task oriented html user guide that also included a page based help TOC entry for each page. I then used iframes in the APEX help page to allow me to have a TOC always showing with links that controlled a content "pane," but still also display the automatically-generated item help for the page help is called from.
* Downloaded the DITA open toolkit (http://sourceforge.net/projects/dita-ot ), full package distribution and installed using the user guide (http://dita-ot.sourceforge.net/doc/ot-userguide131/xhtml/ )
* Downloaded and installed XMLmind XML editor free personal edition version ([http://www.xmlmind.com/xmleditor/download.shtml]). I'm not endorsing this thing, but it's free and it works great out of the box for editing DITA files.
* Created an html user guide by modifying the garage sample that's included with the DITA open toolkit and publishing to xhtml (I also published to pdf2, by the way, to provide a printable user guide for my users to download...one of the nice things about DITA). I set up my files so that they would all be in a topics subfolder, rather than the standard task, concept, and reference folders of the example. I did this so that I wouldn't have to worry about linking to a different folder from APEX (more on that later). I made a concept topic for each page of my application with the filename "Concept_About_page_X.dita," where X is the APEX page number.
* I run APEX using Oracle Application Server 10g, so I uploaded the files to a subdirectory of their own in the i/ folder on the OAS server. In my case this was APPSERVER_HOME/apache/apache/images/doc/MyAppHelp/
* The DITA toolkit generates html pages that look for a CSS called commonltr.css, located at the same level as the index.html file. I copied my APEX theme's CSS file to that same place and renamed it commonltr.css (in my case that was APPSERVER_HOME/apache/apache/images/themes/theme_13/theme_V3.css). Now, the proper thing to do would be to configure DITA to point at the real location of the theme's CSS, I guess. But I didn't want to figure out how to do that at this point.
* Now, in APEX, I deleted all of the page-level help text from my pages, since I had now duplicated this information into the DITA page concept topics. Instead, on each page I put
* On the help page (the page that you create when you're first setting up Help in APEX, mine is page 50), I added the following iframe tags in the header text of the page: \\ <iframe src="../../i/doc/gradevalhelp/index.html" width="40%" height="50%" align="left"></iframe><iframe name="contentwin" src="../../i/doc/gradevalhelp/topics/Concept_About_page_&REQUEST..html" width="60%" height="50%" align="right"></iframe><br> \\ Note the <br> at the end. I had to put that in to prevent the item level help from printing over my content iframe. Again, someone who knows something about html could probably tell you the right way to do that. The DITA toolkit generates a base tag (<base target="contentwin"/>) in the head section of the index.html file, to make the target of the TOC links be the content frame. Notice how I use it to map the links in the first iframe to the second iframe on the APEX help page, by naming the second frame "contentwin". Notice how the &REQUEST. Substitution string is used to present the proper DITA html file. I also tried setting it up to use a calculated hidden item that looks up the page alias for the requesting page; this had the advantage of allowing me to name my DITA files using page alias instead of page number, but it was too slow.

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Creation of context sensitive help with pure FM 12 usage doesn't work

Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000    1
#define 2022    2
#define 2030    3
#define 2180    4
#define 2354    5
#define 2560    6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
Mohi

Hi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Query Help with Parent, Child, Child's Child

Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advance

Hi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support

Help with OAS

Similar Messages

Maybe you are looking for