Help with pictures stuck in Elements 7
I have my sons birth pictures on an old lap top and was trying to back them up to a thumb drive.As I was bakcing up, I noticed several years missing in My Pictures, so I started looking in Elements 7. Three years of photos (about 10,000) show up in Elements, but I can't seem to get them to do anything. It tells me I need to reconnect them any time I want to transfer or send them to a storage, but there are no files to connect to. I long ago erased the memory cards and no longer have the original photos. How can I get them to show up to transfer to the thumb drive? These are really important pictures to me and my wife. If you can help me I would really appreciate it!!
When you imported them into the Organizer's catalog, did you do that with the PSE command, File > Get Photos > From Camera or Card Reader? I may have the phrasing a bit off, but I think it's close to that.
If you did that, the default is to Copy the pictures from the loaded card. On the other hand if you had upoaded the pictures using the From Files and Folders option, there are more possibilites for where they went and whether or not they were copied to your PC, or just using the Organizer to inventory your card and generating thumbnails the pictures.
Try this, use the Windows search to look for a couple of the picctures you know should be on your PC. The search bar is found by pressing the Start button on your desktop. If Windows finds the images, you will most likely find where the images re stored onyour commputer, and can then use PSE's Reconnect commnd to fix your Catalog.
Similar Messages
-
Need help with pictures on an external HDD and windows labtop to Ipad3
Hallo everybody!
This week (I finally) bought an Ipad 3 and an Apple TV!
For the time being I still have a windows labtop and an external HDD full with photo's.
The ICloud software for windows has been installed because I would like to stream the pictures from this external HDD to my Ipad and then ofcourse on my flatscreen TV (via Apple TV). And ofcourse back, when I have taken a photo or a movie on the Ipad 3.
I would appreciate some help with the following questions:
do I have add all pictures from the HDD into a new map on the windows labtop. So that via Icloud the contain could become 'in the cloud'.
or do I have to add all the pictures from the HDD into the Itunes map on the windows labtop.
I have connected the Ipad to the windows labtop and via Itunes I have synchroniced a lot of pictures to the Ipad. I asume these are copies? And is it possible to remove them from the Ipad, because it will take a lot of memory (currently already 35 GB from the 64 GB).
Well I hope somebody could help me.
Many thanks in advance!
Ronald from the NetherlandI just found out that ICloud isen't really a storage place for photo's. Just a passing throw station to your other devices.
-
Help with XMLSEQUENCE and repeating elements
I need help with the following XML extraction (note this is on Oracle9i). I have the following XML structure. There are multiple <Reading> elements
<MeterReadings>
<MeterReading>
<Meter>
<id>0004128190</id>
<idType>METER_X_UNIVERSAL_ID</idType>
</Meter>
<Premise>
<id>PREM4128190</id>
<idType>X_CLIENT_PRMSE_ID</idType>
</Premise>
<Reading>
<value>11111</value>
<readingTypeId>CKWH</readingTypeId>
</Reading>
<Reading>
<value>22222</value>
<readingTypeId>KWHP</readingTypeId>
</Reading>
</MeterReading>
</MeterReadings>
I want to return one row for each <reading> element, including all its sub-elements - <value> and <readingTypeId>
So, for the above data set, I would like to get back something like this. The parent elements can be repeated.
<meter/id>,<Premise/id>,<Reading/value>,<Reading/readingTypeId>
0004128190,PREM4128190,11111,CKWH
0004128190,PREM4128190,22222,KWHP
I have tried to use the XMLSequence function like this:
select extractvalue(i.xml_message,'MeterReadings/MeterReading/Meter/id'),
extractvalue(value(p),'value'), extractvalue(value(p),'readingTypeId')
from myTable i,
table(XMLSequence(
extract(i._xml_message, '//Reading/*' ))) p
But then I get results like this, where each sub-element results in a new row:
0004128190 11111 null
0004128190 null CKWH
0004128190 22222 null
0004128190 null KWHP
What would be the proper XQuery?
Thanks!This may help:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/examplevert.htm
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://www.csstemplates.com.au
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"teamkombat" <[email protected]> wrote in
message
news:ept196$d1g$[email protected]..
> Hi I am trying to create a very simple effect where my
page casts a
> shadow. If
> you take a look at
http://www.timberland.com/home/index.jsp
the left and
> right
> side of the page has a very light shadow. I would like
to use a similar
> effect. What I was thinking was to create 2 small .gifs
with the shadow
> effect
> (1 for the left side and 1 for the right side) maybe
10px long. Then
> create 1
> table with 3 columns: The middle collumn will be the
main column for the
> content and 2 thin/small columns on the left and right
to attach the
> shadow
> .gifs.
>
> I was wondering how do I repeat this shadow .gif image
for the length of
> the
> main column?
>
> Also if there is a better solution to the above problem
please let me
> know. I
> have read about faux columns and using CSS for repeating
images, but don't
> really grasp the ideas yet. Thanks everyone for their
time and help.
>
> -
Help with saving images Photoshop Elements
Hi, I am using Photoshop Elements 11 and Windows 8 or 8.1. Sometimes when I save images in PS E11, they do not save so that I can see the image as usual. Instead they save with either the Photoshop logo or the Windows Pictures logo. When I try to open them in Windows Pictures, I get a message saying something like "cannot open, wrong format" and I cannot post them onto the web either. What am I doing? Please help, thank you.
Hi Eeevanwok,
Please let me know if this is happening with particular file format?
And what all steps did you try from your end?
Sarika -
Hi,
I need some help to try to understand some of my issues; i'm creating a catalogue for a company and i'm uploading TIFFs pictures (600 of them). My problem is that this catalogue is both for print and web but is getting really heavy as a file, is there another way to convert all the pictures and maintain the quality for print and a reasonable size for web?
I'm uploading TIFFs because i need the transparency and i can't upload as PNG...
Can someone help me please.
I really appreciatealanpires wrote:
... this catalogue is both for print and web ...
Choose either file size (for web) or image quality (for print). Something has to give.
This "for web" business, is that still a PDF? Then export for print with full resolution, and export another version to put online where yo adjust the export settings for the web until image quality is worse than having a megabyte or two more. -
Help with downloaded purchases PS Elements 10 and Premiere Elements 10
Unable to find downloadable copies of these 2 programs. I have a list from Adobe dated 2012 with serial numbers for both downloaded versions. Thank you for your help.
Majorie6090
Thanks for the reply.
Are you doing the Premiere Elements 10 download and install with the antivirus and firewall(s) disabled?
If yes and you are continuing to have problems with that message, start again, but this time do the
downloading and installing from the web site cited in my earlier post.
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Just read and carry out carefully the "Note: Very Important Instructions" on the web page and all will
go well. After you get beyond that "Note: Very Important Instructions" part, you will have the opportunity
to click on the two needed files shown on that web page (File 1: the .exe and File 2: the 7z the actual program).
I am suspecting you are missing the .exe file which is prone to problems with Firewall(s).
If you are not already, be sure to be selecting files the files that correspond to your computer operating system
including 32 or 64 bit.
Bottom line: If you want, try again in what you are doing with antivirus and firewalls disabled. If that
does not work, then use the web site mentioned to get tryout Premiere Elements 10 installation files
into which you insert your purchased serial number.
We will be watching for your progress.
Best wishes
ATR -
Help with missing files in Elements 3
I am not a computer wizard an dI am trying to catalogue my digital photos. I have almost 2,000 photos in Photoshop elements.All the photos are in the browser and I have created folders for each holiday, wedding, graduation etc. and copied photos into them. Suddenly a lot of the photos have a red rectangle on the bottom of them with a jagged line running diagonally across them which I have now learned means that there is a missing file. I have tried to reconnect the missing file following the help program but nothing happens except the 'torch' searching for the file. I can't do anything with these photos, I can't edit them or print them of copy them to a flash drive as back up. All these photos are precious and I can still see the image in teh browser. Have I lost them?
OK I consider myself severely reprimanded!
Sorry to appear dim but all I have ever done is:
1 open photoshop elements
2. take the card out of my camera
3. put it into my computer.
4. click 'get photos'
5.save photos to my browser
6. create new folders as previously described.
Photoshop Elements toolbar has the camera to 'get photos' so that's what I did, I didn't put them anywhere else first and then copy them into there.
The photos in my browser and the copies in my folders all have the 'missing file' icon so I can't drag the folder one back into the browser it just keeps saying 'missing file'. Plus some photos I haven't copied to folders also show the same icon. Can I say goodbye to my photos or are they there somewhere but I just can't find them? I haven't deleted anything. -
Need help with my new WD elements hard drive
so i bought this WD Elements 2TB online from Buy.com with usb cable compatble for both 2.0 and 3.0. when i hook it to my personal laptop which has windows 7 professional as OS (byt the way its 2 year old laptop). as soon as i hook it up i get a little icon on right side conrner of my laptop saying driver installed successfully but not recognized as i dont see it under my Computer where all the drives will be shown and when i go to disk management i see it as unallocated and not able to format when i try to format it. but when i connect to my office desk top which has same OS as my laptop 1st time it asked me if i want to format which i did and its just works fine from then, so i thought it will be fine with my laptop as well but for my distress its same again. is it problem with my usb ports , if so then my other hard drive shouldnt be working right but they work just fine. does anyone had the same issue , please help me out with sugesstions and advises as i m getting frustated with this. thanks
Hi there, welcome to the community.
It might be that your computer is not providing enough power, have you checked on the power settings on your computer? -
higuys i dont really know anything about photoshop but what im looking for is a guide to layer 2 pictures over each other..the first picture is of a car and the second is of an alloy wheel,what i want is to be able to move the picture of the alloy onto the picture of the car so i can see what the wheel looks like on the car.any help appreciated
UMM I think he needs to select and cut out just the WHEELS and apply to the
car picture
read the rest of his post
making selections is too much to type
there are many techniques and many tutorials
basically once you got the wheel selected just open car image and drag the
selection over the other picture (or copy/paste)
then use edit>transform to resize or change perspective to fit
if the wheel is the same for front and back
drag wheel layer to the paper icon to dupe it and use move tool to place
over other wheel
save the layered doc as PSD in case you need to edit
and use save as.. or save for web to make a flattened copy -
Need help with picture-in-picture effect!!! URGENT
I've been trying to find out a way to use a picture-in-picture effect in adobe premiere pro cs3 but it just hasn't been possible.
I know that adobe premiere elements 3.0 has that option, but I can't seem to find it in pro cs3.
Can someone give me a hand? I'd really appreciate it!See if
Wrigley Video Tutorials
has a lesson
Also the Wiki
http://ppro.wikia.com/wiki/Tutorials_and_articles -
Need help with downloading adobe photoshop elements 11 and premiere elements 11.
i already have my product keys from the internet, but when i go to the download page and push on the download button, nothing happens. im running windows 8
clear your adobe.com cookies, or try another browser, or:
if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). -
6300 need help with picture message settings
hello
i cant seem to find how to enter my picture message settings
could someone please explain just what to do
i have the following from my provider
Advanced Options- TCP/IP= Check the box for APN settings enabled APN: uk.lebara.mobi We do not enable authentication.call your operator and ask them to send the settings over the air these normally come in via text and when you recieve the message you will be given the option to save or discard,so save the message and select as default
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
How can I cutout the background of a picture and save it and be able to paste it over another picture without the background. The picture is not square. I tried clipping path but it didn't work. Please explain in step by step.
With that image, you can just use the Magic Wand to click on the white background (if that is what you wish to remove) to Select it. Hit Shift+Ctrl+I (to Invert the Selection) and then hit Delete to remove it. To keep the Transparency, you will want to Save_As .PSD, or similar, to preserve Transparency, other wise a format like JPEG will fill it in with white again.
With that image Open, you can do several things: Ctrl+C (Copy) and then go to your second image and hit Ctrl+V (Paste) to put it in as a new Layer. From your Opened image, you can drag its Layer into another image.
Good luck,
Hunt -
Help with photo collage in Elements 10
I am new to Photoshop Elements 10. I am trying to create a photo collage, but a window pops up saying "Valid size not available for this creation". Can someone help me fix this so I can create??
You can select the layout-horizontal or vertical while choosing a theme for the collage. As you select the theme in Photo collage dialog, it shows the size as x*y inches or y*x inches which decides whether your collage would be portrait or landscape.
Let me know if that helps!
regards,
vaishali -
Help with inserting a list element in a Web page
Hello,
I�m a newbie. I want to introduce an element list in a web page. I have source that creates a List as a standalone application (with a main procedure..) , through the JList class, but I want this list to appear integrated in the web page. How could I do it? Could anyone give me any idea, URL, etc...??
Thanks,as writte above: if it as simple as you wrote use something like this:
* (c) Copyright 2002 B. Braun Melsungen AG
* All Rights Reserved.
package domainrequest;
import java.io.*;
import java.util.*;
* implements the <select> form html element providing easy methods to fill the list of options and print the html source code
* @version 1.0
* @author Erik Itter
public class HtmlListBox {
ArrayList options = new ArrayList();//HashMap does not guarantee an order
String name;
public HtmlListBox(String Name){
name=Name;
public ArrayList getOptions(){
return options;
public String getOtptionName(String Value){
for(int i=0;i<options.size();i++){
if((((ListBoxOption)(options.get(i))) ).getValue()==Value){
return ((ListBoxOption)(options.get(i))).getName();
return null;
public int addOption(String Value,String Name){
options.add(new ListBoxOption(Value,Name));
return options.size();
public void print(PrintWriter out){
out.println("<select name=\""+name+"\">");
for(int i=0;i<options.size();i++){
out.println("<option value=\""+( (ListBoxOption)options.get(i) ).getValue()+"\">"+( (ListBoxOption)options.get(i) ).getName()+"</option>");
out.println("</select>");
using
* (c) Copyright 2002 B. Braun Melsungen AG
* All Rights Reserved.
package domainrequest;
* This class' only reason for existence is to be abused
* (look at that code and you will understand...) by HtmlListBox
* implementing a single option's data fields.
* This is similar to the points and complex numbers they have in
* all those tutorials...
* @version 1.0
* @author Erik Itter
public class ListBoxOption{
String value;
String name;
* Constructs an option allowing to differ between the elements value and
* the displayed representation
public ListBoxOption(String Value,String Name){
value=Value;
name=Name;
* Constructs an option taking the displayed name as value, too. Actually
* this is the most common use but less helpfull for complex applications.
public ListBoxOption(String Name){
value=name=Name;
* returns the option's value (could you imagine that...?)
public String getValue(){
return value;
* returns the option's name. (...oh so predictable!)
public String getName(){
return name;
it is sufficient for the three tier intranet application i am developing for our company, since the code is trivial feel free to use it if you like
Maybe you are looking for
-
Hi Gurus, Need a little suggestion for a doubt - I accidently changed Material Masters data of some items, after running a faulty LSMW When I look at the change document for some of those articles it says - Change Tax classification article
-
Down arrow in scrolling bar has disappeared
On most screens the down arrow in the scrolling bar has disappeared or occupies the same space as the page expansion square in the lower right hand corner. Tried having the up arrow both at the top and at the bottom of the scrolling bar. Diappearance
-
Scan for viruses before file upload
Hi, I'm making a HR application which will allow for public users to upload their resumes in word, pdf, etc format. I'd like to scan the files for viruses before they are inserted into the DB. From my understanding, files are loaded in the wwv_flow_f
-
Sticky hide and show not working
I believe I have followed Carl Backstrom's Sticky Hide and Show Region example to the letter for my own application. 1 - I have the application items and application processes in place. 2 - I have the javascript in the HTML Header attribute 3 - The S
-
Helo, -> I want to build an applet which has to display unicode. -> my applet will be similar to a soft keyboard. -> Please let me know how to bring unicode characters on buttons and lables. Its really urgent. hoping for the solution