Help with print statement

Why is this code
for(i=0;i<accounts.length;i++){
System.out.format("Account" + i+1 + "Initial balance: %5.2f\n",accounts.getBalance());
producing this output:
Account01Initial balance: 5000.00
Instead of this output
Account 1 Initial balance:5000.00
Why is it printing 01 insead of just 1

gammaman wrote:
Thanks, I did not realize that you needed the parenthesis. Correct me if I am wrong, but if I remember correctly,
in C++ this was not the case.I don't remember the exact rules of string concatination in C++ (never wrote much code in that language), but if I wanted to write to a stream, I'd use something like this:
cout << "foo" << i+1 << "bar";So the problem never came up with this kind of code.

Similar Messages

Help with Print Layout Designer

Hi all,
I'm not sure if I should post this here or not, I already posted it in the Business One Forum. Moderator(s) if this is not the proper place please delete it and let me know that it is not the appropriate venue.
I need some help with Print Layout Designer. I am running 2005A SP01, and my customer wants a modification to the Sales Backorder Report. They want to add the column "In Stock" to both the report as displayed on the screen and the printed document. The report rendered to the screen has the In Stock, but it is not checked as visible. I check it and In Stock shows up as designed. The part I am having problems with is the printed document. I opened the PLD from the Backorder Report, and saved it under a different name. I resized some of the columns in the repetitive area (header and data) to make room for the In Stock column. I CAN add the text field Instock as free text and enter "In Stock" as the content. I looked at the "backorder" column in the PLD, and it is a text field with the source System Variable and the variable is 109. I would assume that all I need to do in my added column is to set the source to System Variable and enter the variable number. That is the problem; I can't find the variable number for that column. I looked on the report rendered to the screen with system information on and the variable is "3 #000027825,OnHand". I looked at the Back Order column of the report rendered to the screen and the variable is "3 #000028725,OpenCreQty". I found a spreadsheet that is supposed to contain a list of system variables for 2007A, but the document type for this report is BRDR and that document type does not appear in the list of document types in that spreadsheet. I looked for a similar spreadsheet for 2005A SP01 but didn't find one. I DID find a document "How To Customize Printing Templates with the Print Layout Designer". According to that document, I should be able to get the system variable from the report rendered to the screen with System Information turned on. Can anyone help?
TIA,
Steve

I haven't dealt with this before so I can't be certain, but here are my thoughts.
The Backordered Qty is probably a calculated field, so that's why it's a system variable. The In Stock is a defined field, so you probably can use the file and field number, OITM, OnHand. I would look at maybe the stock number or description to see how those are setup on the form instead of the backordered qty field.

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Print out all methods in program with print statements

Does anyone know how I would be able to print out all the methods in a program. For example:
class bd220p1 {
     public static void main(String args[]) {
          int lightspeedi,lightspeedm;
          long days;
          long seconds;
          long distancei;
          long distancem;
          // approximate speed of light in miles per second
          lightspeedi = 186000;
            // approximate speed of light in Kilometers per second
          lightspeedm = 300000;
          days = 1000; // specify number of days here
          seconds = days * 24 * 60 * 60; // convert to seconds
          distancem = lightspeedm * seconds; // compute distance in English system
          distancei = lightspeedi * seconds;// compute distance in Metric system
          System.out.print("In " + days);
          System.out.print(" days light will travel about ");
          System.out.println(distancei + " miles and");
          System.out.print(distancem + " Kilometers ");
}This code would produce 5 print statements for the 4 methods:
1 Main method
2 Print method
3 Print method
4 Println method
5 Print method
Does anyone know I can write the could to accomplish this? Right now I am experimenting with try/catch statements. Any help is greatly appreciated.

It seems to me the easiest approaches (other than using a tool someone else has already written) are:
1) Compile the source, and then use BCEL
2) Try some regular expressions; it won't be perfect but maybe you can tweak it until it's good enough.
3) Parse the source, and examine the parse tree.
1 and 3 will give you much better results, but require you to use outside libraries (or write a parser yourself).
You can do 2 using standard stuff from the JDK, but you may spend a lot of trial-and-error gettng the regexps right.
Which you choose will depend a lot on what the prof giving the assignment allows.
Also he may have some particular kind of solution in mind -- did he say anything?
If you're not sure what to do, ask your prof for clarification.

Problem with print statements in procedure

We have a stored procedure version that looks the same as this. My problem is that at the beginning of this routine, there's a print statement (right after the BEGIN keyword), and that prints out to the screen only if the print statement inside the loop is uncommented. Why is this? Does it have something with the buffer not flushing to the screen until it gets a certain amount of output. I tried copying that first statement over and over half a dozen times, but it didn't seem to help. I've tried
set serveroutput on
and
set serveroutput on 2000
and
set serveroutput on 200000
but no matter what, whether in this version or the procedure version, that first statement only prints if the second one is also in there!
declare
l_cnt integer;
l_day_num integer;
CURSOR CUR1 is
select ACCTNUMBER,
FNBR,
REP
FROM FSUMMARY;
BEGIN
DBMS_OUTPUT.put_line('Beginning daily_total and deleting CMHISTORYINDEXWORK');
delete CMHISTORYINDEXWORK;
commit;
update FSUMMARY set FNBR='999999999' where FNBR is NULL;
COMMIT;
update FSUMMARY set REP='99' where REP is NULL;
commit;
FOR C in CUR1 LOOP
select count(ACCOUNTNBR) into l_cnt from CMHISTORYINDEXWORK where FNBR=C.FNBR AND REP=C.REP AND ACCOUNTNBR=C.ACCTNUMBER;
DBMS_OUTPUT.put_line('Count: ' || l_cnt || ' for rep ' || C.REP);

The output from DBMS_OUTPUT is not displayed until the procedure completes, so your first call will not show until after all the work is done.
Assuming that you actually have an END LOOP; and a final END; in the block, I see no reason why there would be any connection between the calls to DBMS_OUTPUT.
Doing SET SERVEROUTPUT on SIZE just sets the maximum number of characters that can be stored in the outout buffer before it overflows. It has no bearing on whether or when anything gets printed. If the buffer is too small, you will get partial output and an error:
ORA-20000: ORU-10027: buffer overflow, limit of 2000 bytes
ORA-06512: at "SYS.DBMS_OUTPUT", line 35
ORA-06512: at "SYS.DBMS_OUTPUT", line 198
ORA-06512: at "SYS.DBMS_OUTPUT", line 139John

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

Help with If statement please

Hi,
First Special thanks to Kglad for the help with the AS1 to AS3 conversion.
I've been able to link up my buttons to play a different frames of the movie. this was my novice way of finally getting the programming to work.
In frame 95 I have
var myLoader:Loader = new Loader();
addChild(myLoader); var url:URLRequest = new URLRequest("page1.swf");
myLoader.load(url);
in frame 165:
var myLoader1:Loader = new Loader();
addChild(myLoader1); var url1:URLRequest = new URLRequest("page1.swf");
myLoader1.load(url1);
My buttons link to 116 which plays a frame and loads ^
in frame 226: removeChild(myLoader).
But if the user has looped back into home from another part in the movie clip then it would need to remove myLoader1 instead of myLoader.
I'm guessing there is some really dynamic way to solve the programatic nightmare i'm developing, but I'm really novice.
So what i need is an if statement for frame 226
That would do something:
if(myLoader <> null
removeChild(myLoader)
else(
removechild(myLoader1)
Anyone have a method for this?

yes, you can use the same urlrequest but just change its url property:
// initialize, for example in frame 1. this is done once and never again:
var loader:Loader=new Loader();
var urlR:URLRequest=new URLRequest();
// then in frame 2, for example:
urlR.url="page1.swf";
loader.load(urlR);
// in frame 20, for example:
urlR.url="page2.swf";
loader.load(urlR);
// in frame 30, for example:
urlR.url="page3.swf";
loader.load(urlR);
//etc. if you're loading any swfs that play streams (sound or video), you'll want to add some code to this.

Help with Switch statements using Enums?

Hello, i need help with writing switch statements involving enums. Researched a lot but still cant find desired answer so going to ask here. Ok i'll cut story short.
Im writing a calculator program. The main problem is writing code for controlling the engine of calculator which sequences of sum actions.
I have enum class on itself. Atm i think thats ok. I have another class - the engine which does the work.
I planned to have a switch statement which takes in parameter of a string n. This string n is received from the user interface when users press a button say; "1 + 2 = " which each time n should be "1", "+", "2" and "=" respectively.
My algorithm would be as follows checking if its a operator(+) a case carry out adding etc.. each case producing its own task. ( I know i can do it with many simple if..else but that is bad programming technique hence im not going down that route) So here the problem arises - i cant get the switch to successfully complete its task... How about look at my code to understand it better.
I have posted below all the relevant code i got so far, not including the swing codes because they are not needed here...
ValidOperators v;
public Calculator_Engine(ValidOperators v){
          stack = new Stack(20);
          //The creation of the stack...
          this.v = v;
public void main_Engine(String n){
     ValidOperators v = ValidOperators.numbers;
                *vo = vo.valueOf(n);*
     switch(v){
     case Add: add(); break;
     case Sub: sub(); break;
     case Mul: Mul(); break;
     case Div: Div(); break;
     case Eq:sum = stack.sPop(); System.out.println("Sum= " + sum);
     default: double number = Integer.parseInt(n);
                   numberPressed(number);
                   break;
                  //default meaning its number so pass it to a method to do a job
public enum ValidOperators {
     Add("+"), Sub("-"), Mul("X"), Div("/"),
     Eq("="), Numbers("?"); }
     Notes*
It gives out error: "No enum const class ValidOperators.+" when i press button +.
It has nothing to do with listeners as it highlighted the error is coming from the line:switch(v){
I think i know where the problem is.. the line "vo = vo.valueOf(n);"
This line gets the string and store the enum as that value instead of Add, Sub etc... So how would i solve the problem?
But.. I dont know how to fix it. ANy help would be good
Need more info please ask!
Thanks in advance.

demo:
import java.util.*;
public class EnumExample {
    enum E {
        STAR("*"), HASH("#");
        private String symbol;
        private static Map<String, E> map = new HashMap<String, E>();
        static {
            put(STAR);
            put(HASH);
        public String getSymbol() {
            return symbol;
        private E(String symbol) {
            this.symbol = symbol;
        private static void put(E e) {
            map.put(e.getSymbol(), e);
        public static E parse(String symbol) {
            return map.get(symbol);
    public static void main(String[] args) {
        System.out.println(E.valueOf("STAR")); //succeeds
        System.out.println(E.parse("*")); //succeeds
        System.out.println(E.parse("STAR")); //fails: null
        System.out.println(E.valueOf("*")); //fails: IllegalArgumentException
}

Need help with Printer Setup conventions

I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.

Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

Need some help with printing Templates

Hi All,
So I was hoping for a bit of help. I am currently doing all illustrator work for my new job. I have not been on the program in a long time and the version I am using is CS4. I have been creating brochures and flyers all A4 size and i have hit a bump in the road. I need a 6pp A4 Z folded (Inside) and 6pp A4 Z folded (outside) template. I Have been using the A3 folded to A4 guides to great affect for a two page brochure. But i cannot for the life of me find a template guides for 6pp A4 brochure.
This was the best i could do, its a pdf but I prefer working with the guides. I have just been downloading the previous templates from commercial printing websites. I found one that was right but not compatible with CS4.
Any help with finding one or any ideas on a path to take would be greatly appreciated.

Why don't you just setup the file you need?
Create your guidelines and there you go.

Help with if statement for a beginner.

Hello, Im new to the dev lark and wondered if someone could point me in the right direction.
I have the following (working!) app that lets users press a few buttons instead of typing console commands (please do not be too critical of it, its my first work prog).
//DBS File send and Receive app 1.0
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import java.awt.Font;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JCheckBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTextArea;
import java.applet.Applet;
public class Buttons extends JFrame
     public Buttons()
          super("DBS 2");
          JTextArea myText = new JTextArea   ("Welcome to the DBS application." +
                                                       "\n" +
                                                       "\n\n1. If you have received an email informing you that the DBS is ready to dowload please press the \"Receive DBS\" button." +
                                                       "\n" +
                                                       "\n1. Once this has been Received successfully please press the \"Prep File\" button." +
                                                       "\n\n2. Once the files have been moved to their appropriate locations, please do the \"Load\" into PAS." +
                                                       "\n\n3. Once the \"Load\" is complete, do the \"Extract\"." +
                                                       "\n\n4. When the \"Extract\" has taken place please press the \"File Shuffle\" button." +
                                                       "\n\n5. When the files have been shuffled, please press the \"Send DBS\" Button." +
                                                       "\n\nJob done." +
                                                       "\n", 20,50);
          JPanel holdAll = new JPanel();
          JPanel topPanel = new JPanel();
          JPanel bottomPanel = new JPanel();
          JPanel middle1 = new JPanel();
          JPanel middle2 = new JPanel();
          JPanel middle3 = new JPanel();
          topPanel.setLayout(new FlowLayout());
          middle1.setLayout(new FlowLayout());
          middle2.setLayout(new FlowLayout());
          middle3.setLayout(new FlowLayout());
          bottomPanel.setLayout(new FlowLayout());
          myText.setBackground(new java.awt.Color(0, 0, 0));
          myText.setForeground(new java.awt.Color(255,255,255));
          myText.setFont(new java.awt.Font("Times",0, 16));
          myText.setLineWrap(true);
          myText.setWrapStyleWord(true);
          holdAll.setLayout(new BorderLayout());
          topPanel.setBackground(new java.awt.Color(153, 101, 52));
          bottomPanel.setForeground(new java.awt.Color(153, 0, 52));
          holdAll.add(topPanel, BorderLayout.CENTER);
          topPanel.add(myText, BorderLayout.NORTH);
          setSize(700, 600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          getContentPane().add(holdAll, BorderLayout.CENTER);
          Container c = getContentPane();
          c.setLayout(new FlowLayout());
          final JButton receiveDBS = new JButton("Receive DBS"); //marked as final as it is called in an Inner Class later
          final JButton filePrep = new JButton("Prep File");
          final JButton fileShuffle = new JButton("File Shuffle");
          final JButton sendDBS = new JButton("Send DBS");
          JButton exitButton = new JButton("Exit");
//          JLabel statusbar = new JLabel("Text here");
          receiveDBS.setFont(new java.awt.Font("Arial", 0, 25));
          filePrep.setFont(new java.awt.Font("Arial", 0, 25));
          fileShuffle.setFont(new java.awt.Font("Arial", 0, 25));
          sendDBS.setFont(new java.awt.Font("Arial", 0, 25));
          exitButton.setBorderPainted ( false );
          exitButton.setMargin( new Insets ( 10, 10, 10, 10 ));
          exitButton.setToolTipText( "EXIT Button" );
          exitButton.setFont(new java.awt.Font("Arial", 0, 20));
          exitButton.setEnabled(true); //Set to (false) to disable
          exitButton.setForeground(new java.awt.Color(0, 0, 0));
          exitButton.setHorizontalTextPosition(SwingConstants.CENTER); //Don't know what this does
          exitButton.setBounds(10, 30, 90, 50); //Don't know what this does
          exitButton.setBackground(new java.awt.Color(153, 101, 52));
          topPanel.add(receiveDBS);
          middle1.add(filePrep);
          middle2.add(exitButton);
          middle3.add(fileShuffle);
          bottomPanel.add(sendDBS);
          receiveDBS.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == receiveDBS);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\ReceiveDBSfile.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          filePrep.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == filePrep);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\filePrep.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          exitButton.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    System.exit(0);
          fileShuffle.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == fileShuffle);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\fileShuffle.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          sendDBS.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == sendDBS);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\sendDBSFile.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          c.add(receiveDBS);
          c.add(filePrep);
          c.add(fileShuffle);
          c.add(sendDBS);
          c.add(exitButton);
//          c.add(statusbar);
     public static void main(String args[])
          Buttons xyz = new Buttons();
          xyz.setVisible(true);
     }What I would like help with is the following
I would like output to either a JLabel or JTextArea to appear if a file appears on the network. Something along these lines
If file named nststrace*.* is in \\[network path] then output Download successful, please proceed.
btw I have done my best to search this forum for something similar and had no luck, but I am looking forward to Encephalopathics answer as he/she has consistently made me laugh with posted responses (in a good way).
Thanks in advance, Paul.

Hospital_Apps_Monkey wrote:
we're starting to get aquainted, but I think "best friend" could take a while as it is still as hard going as I recall, but I will persevere.Heh, it's not so bad! For example, if I had no idea how to test whether a file exists, I would just scan the big list of classes on the left for names that sound like they might include File operations. Hey look, File! Then I'd look at all of File's methods for something that tests whether it exists or not. Hey, exists! Then if I still couldn't figure out how to use it, I'd do a google search on that particular method.

Help with dynamic statement returning values into collection

Hi All
I am trying to use dynamic statement to return values into a collection using the returning clause. However, I get an ORA-00933 error. Here is a simple setup:
create table t(
    pk number,
    id_batch varchar2(30),
    date_created date,
    constraint t_pk primary key ( pk )
create or replace type num_ntt is table of number;
create or replace type vc2_ntt is table of varchar2(30);
create or replace
package pkg
as
type rec is record(
      pk        num_ntt,
      id_batch vc2_ntt
procedure p(
      p_count in number,
      p_rt    out nocopy rec
end pkg;
create or replace
package body pkg
as
procedure p(
      p_count in number,
      p_rt    out nocopy rec
is
begin
      execute immediate '
      insert into t
      select level, ''x'' || level, sysdate
      from   dual
      connect by level <= :p_count
      returning pk, id_batch into :pk, :id_batch'
      using p_count returning bulk collect into p_rt.pk, p_rt.id_batch;
end p;
end pkg;
declare
r pkg.rec;
begin
pkg.p( 5, r );
end;
/

sanjeevchauhan wrote:
but I am working with dynamic statement and returning multiple fields into a collection.And using an INSERT...SELECT statement combined with a RETURNING INTO clause still does not work. Whether it's dynamic SQL or not: it doesn't work. The link describes a workaround.
By the way, I don't see why you are using dynamic SQL here. Static SQL will do just fine. And so you can literally copy Adrian's setup.
Regards,
Rob.

Help with printing hard copy from Acrobat PDF

Copy created in InDesign and printed to Adobe PDF is OK on screen but printing hard copy with random chunks of text missing. Same on both my printers, doesn't happen with doPDF. Any ideas? Thanks

I suspect that what you are asking is simply to print to a new PDF with print as image selected. You can also save as an image file and then open the images as a new PDF.

Need help with Object States or Buttons?

I currently work in InDesign to compile layouts and present design decks to clients. Our template includes an approval section (Not Approved, Revised, Approved) that we currently have as white/black bubbles that we change manually on each page. I've been trying to find a way to speed up this process. I know that in InDesign you can create buttons than you can then click on-off on your PDF - we used to do this but it is too time consuming (we have PDF's anywhere from 25-120 pages). I have been playing around with Object States, so we can quickly update the bubbles in InDesign itself as we work.
Does anyone know of a way to change the state of multiple objects on multiple pages at the same time? (For example, if I want to change all pages to "Approved" at the same time - or if I only wanted to do some, but not all, of the pages.)
Can anyone recommend any other InDesign tools that may be able to create a similar function for an "approval" stamp, but that still is done in InDesign (not in the PDF after exporting)?

I was hoping that wouldn't be the only way. My have multiple master pages already, and not all pages will be "approved" at the same time. So we've run into issues with putting these on the masters as it gets easier to miss them.

Help with printing a tic tac toe board (using a loop to print)

hey im making the smiple game tic tac toe and im tryin to print out the board after each turn. I have a 2d array called char which is a 3 by 3 array and i dont know how i would make a for loop to print out the x's and o's in their right spot and still have the board look like a normal tic tac toe board. When the board is printing the x's and o's are already in the 2d char array board.So basically what i want to happen is after player 1's turn is up wherever he put the x replace the number on the board with an x and keep the rest the same and whenever player 2's turn is up wherever he put the o replace the number on the board with an o and keep the rest the same. Any help would be awesome thanks alot.
Here is the code to the program (i know i use if statements to much its a bad habit of mine)
import java.util.*;
public class Tictactoe
    private char board [] [] = new board [3] [3];
    private int X;
    private int O;
    private Scanner p1choice;
    private Scanner p2choice;
    Scanner input = new Scanner(System.in);
    public Tictactoe()
        p1choice = new Scanner(System.in);
        p2choice = new Scanner(System.in);
        play();
    public void play()
        printoriginalboard();
    public void printoriginalboard()
        System.out.println("    |    |    ");
        System.out.println(" 3 | 2 | 1 ");
        System.out.println("____|____|____");
        System.out.println("    |    |    ");
        System.out.println(" 6 | 5 | 4 ");
        System.out.println("    |    |    ");
        System.out.println("____|____|____");
        System.out.println("    |    |    ");
        System.out.println(" 9 | 8 | 7 ");
        System.out.println("    |    |    ");
        System.out.println("This is the classic game of tictactoe simply pick a number 1 through 9 to place an x or an o in that area.");
        player1turn();
    public void player1turn()
        System.out.println("Player 1 pick an area to place an X");
        int p1choice= p1choice.nextInt();
        if(p1choice == 1 && p2choice == 1 || p1choice == 1){
            System.out.println("This spot has already been taken");
            else
            board[0][2] = 'x';
        pintboard();
        if(p1choice == 2 && p2choice == 2 || p1choice == 2){
        System.out.println("This spot has already been taken");
        else
            board[1][2] = 'x';
        pintboard();
        if(p1choice == 3 && p2choice == 3 || p1choice == 3){
        System.out.println("This spot has already been taken");
        else
            board[2][2] = 'x';
        pintboard();
        if(p1choice == 4 && p2choice == 4 || p1choice == 4){
        System.out.println("This spot has already been taken");
            board[0][1] = 'x';
        pintboard();
        if(p1choice == 5 && p2choice == 5 || p1choice == 5){
        System.out.println("This spot has already been taken");
        else
            board[1][1] = 'x';
        pintboard();
        if(p1choice == 6 && p2choice == 6 || p1choice == 6){
        System.out.println("This spot has already been taken");
        else
            board[2][1] = 'x';
        pintboard();
        if(p1choice == 7 && p2choice == 7 || p1choice == 7){
        System.out.println("This spot has already been taken");
        else
            board[0][0] = 'x';
        pintboard();
        if(p1choice ==8 && p2choice == 8 || p1choice == 8){
        System.out.println("This spot has already been taken");
        else
            board[1][0] = 'x';
        pintboard();
        if(p1choice == 9 && p2choice == 9 || p1choice == 9){
        System.out.println("This spot has already been taken");
        else
            board[2][0] = 'x';
        pintboard();
    public void p2turn()
        System.out.println("Pick an area to place an O");
        int p2choice = p2choice.nextInt();
        if(p2choice == 1 && p1choice == 1 || p2choice == 1){
        System.out.println("This spot has already been taken");
        else
            board[0][2] = 'o';
        pintboard();
        if(p2choice == 2 && p1choice == 2 || p2choice == 2){
        System.out.println("This spot has already been taken");
        else
            board[1][2] = 'o';
        pintboard();
        if(p2choice == 3 && p1choice == 3 || p2choice == 3){
        System.out.println("This spot has already been taken");
        else
            board[2][2] = 'o';
        pintboard();
        if(p2choice == 4 && p1choice == 4 || p2choice == 4){
        System.out.println("This spot has already been taken");
        else
            board[0][1] = 'o';
        pintboard();
        if(p2choice == 5 && p1choice == 5 || p2choice == 5){
        System.out.println("This spot has already been taken");
        else
            board[1][1] = 'o';
        pintboard();
        if(p2choice == 6 && p1choice == 6 || p2choice == 6){
        System.out.println("This spot has already been taken");
        else
            board[2][1] = 'o';
        pintboard();
        if(p2choice == 7 && p1choice == 7 || p2choice == 7){
        System.out.println("This spot has already been taken");
        else
            board[0][0] = 'o';
        pintboard();
        if(p2choice == 8 && p1choice == 8 || p2choice == 8){
        System.out.println("This spot has already been taken");
        else
            board[1][0] = 'o';
        pintboard();
        if(p2choice == 9 && p1choice == 9 || p2choice == 9){
        System.out.println("This spot has already been taken");
        else
            board[2][0] = 'o';
        pintboard();
    public void pintboard()
    {

Anyway the answer is that you are trying to create an array of char as there is no such thing as a board[3][3].
One of the best tools a programmer can do is learn how to break a big problem into little problems and work on each little problem in isolation, and then when finished combining the solutions together into the final program. You big mistake that I see here is trying to bite off more than you can chew: trying to create a whole functioning interactive program from just one class. Why give yourself a task that would be difficult even for an experienced java programmer? I suggest that you break this down into logical parts and try to solve the smaller problems before worrying about the whole. For instance, if I were doing something like this, I'd create a class called TTTBoard that encapsulated the tic tac toe board and nothing but the board. I'd think of it as an entity. When I wanted the current state of the board, I'd query the board via a method such as getCurrentState. I'd have methods for checking if position is free, for placing an x/o in a spot, for checking for win, etc... Then I'd create a user interface class where I'd give the users a choice and get their responses. I'd probably create a Game class to control it all. While this all seems daunting, you are trying to do essentially the same thing, but all in one huge class. My recommendation: study OOPs and learn to do it the smart way. Good luck.

Help with print statement

Similar Messages

Maybe you are looking for