Help with project management, please?

Hello all!
It's been about a year since I've last visited this forum and I'm lost .. the format must have changed?
Here's what I'm trying to remember (it was a simple task)
I have a project that I would like to break into smaller segments for the sake of managing it.
I recall having selected a portion of my project and either rendering it or exporting it to a file.
There was also some "switch" that should be selected to maintain maximum resolution and no
compression.
When several portions are rendered/exported in this fashion, it becomes an easier task to
pull the pieces into back into a time line for the sake a rendering the completed work to
be burned onto a DVD.
Does anyone remember how this process was done? Was it "Render"? "Export"? What
was the selection that maintains the hi-resolution?
(I’m using Premiere Elements)
Thank you!
--Tom Nickel

Hunt,
Thank you copiously for the information!
I had
done this before, but I've forgotten how!
Thanks again,
--Tom Nickel
Tom,
Â
Welcome to the "new & improved" Adobe forum. Don't
worry, I've been around
these for many more years, than my
Profile indicates, and still cannot
find my way around this new
one.
Â
Now, the process that you
describe is to create "mini-Projects," edit them
>
completely, and then Export to DV-AVI Type II files w/ 48KHz 16-bit
PCM/WAV Audio. These can then be Imported into "master
Project," and
assembled into a final.
>
Â
Just do your full editing, as things like
Transitions will be part of the
these DV-AVI's and to get rid
of them, is a lot of work.
Â
Good luck,
Â
Hunt
>

Similar Messages

Help with Project Management setup from very basics...

hi all!
i am new to e-business suite and now i have installed vision demo database successfully on a Quad Core with 320 GB hard and 4 GB ram...now i need help to setup Project Management (PM) module for a hypothetical construction company with the required functionalities (just limited functionalities and Not complete functionalities as in EBS).i need help in setting up Project Management module from the very basics...so can you help me out in this...thanks in anticipation

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Vista OP--Curve 8330---no sync with desktop manager---please help

I have tried the following versions of desktop manager, 4.3 from disk and download, 4.5, and 4.7. Each new version was tried after clean reinstall. Vista OP. I click the sync configure. I get the select a devise application window. I click on any one of the choices, and get the following choices:
<None>
ASCII importer/exporter
yahoo
THERE IS NO OPTION FOR VISTA
I have read many suggestions on this message community which basically say try a different version. THAT DOESN'T WORK. Is there anything else anyone has tried that works with Windows Vista?

Desktop Manager does not recognize any bluetooth drivers (stacks) other than the basic Windows Bluetooth Stack. If you have another bluetooth stack in use, you'll need to remove it and let Windows install the basic bluetooth stack. The downside of this is that you loose some of the advanced features that your current bluetooth stack gives...extra speed, etc. However, that's the only way to make bluetooth work with Desktop manager.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Help with site management

Hello
New Be taking a course in Dream Weaver using cs6 version. In regards to any help having two questions please. After saving a project. Is there a way I can copy the project over again to have as a second copy for any further purposes. Where my projects are stored under C Drive-- Users --- Jon----A folder I call Dream Weaver and another folder under that Home Work.
The other question. Is there a way I can delete a project in recent items under Dream Weaver Sart page. I've already deleted some work going to Site on the application bar to open the Manage Site dialog box and deleted there. Though I can't open up any projects under recent items the files are there in the start up page. I would just like to delete them. If anyone can help all of my work is in classic view. Thank you kindly Jon.

I think that in order to get rid of the Recent Items on the Dreamweaver Splash Screen, you would have to empty its cache of what was last opened. Depending on what's stored in the cache, that could be dangerous. I recommend you ignore it.
Besides, the "Open Recent" stuff changes in accordance with what you last opened. If you start working on a new website, that stuff will show up there.
And, if you have undefined a site and deleted the stuff in the site, you have cleared it off your hard drive.
As to copying stuff for later use, you can keep a second copy of your website anywhere you like and define that folder as a website by picking Site>New Site name the site and navigate to the local root folder for that site.

ISSUE: Visual Glitches created when file transferring with Project Manager.

I am color grading a feature film in DaVinci and the person who edited the film only logged the footage in premiere and not even all of it. So, as far as I know, the only simple solution is to use project manager to transfer all the files with their in project labels and duplicates with unique names. BUT, when I do this, I end up with visual glitches all over the transferred files. Some are minor and others are huge and for multiple frames. I have no idea what could be causing this or what I could do to fix it. Please help, I have a very close deadline and need to get this resolved!

As a bit of further info I noticed these warnings when running the command - emca -deconfig dbconrtol db -repos drop
Do you wish to continue? [yes(Y)/no(N)]: Y
Aug 5, 2011 4:26:26 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\app\server\cfgtoollogs\emca\GODW\emca_2011_08_05_16_25_58.log.
Aug 5, 2011 4:26:27 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Aug 5, 2011 4:26:28 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C C:\app\server\product\11.2.0\dbhome_2\bin\nmesrvops.exe delete OracleDBConsoleGODW
Aug 5, 2011 4:26:32 PM oracle.sysman.emcp.EMReposConfig invoke
WARNING: Unable to remove DBMS jobs.
Aug 5, 2011 4:26:33 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...

Need help with color management

I am looking for someone to help me. Please!
I am looking for help with Photoshop/printer not printing correct colors.
I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect. I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
I will be working a lot with cardstock or cover stock 65-110 lbs paper. I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one. I have tried matching the settings of that printer to mine to no avail. I have finally gotten the color close, but not quite. When I print on my Canon injet the colors match and print perfectly.
I have tried every setting variation that I can think of to get the color correct with my new OKIdata. I have to get the colors correct or my new business will go under because I can't match colors for my customers. I am a self taught Photoshoper and a novice so please bear with me.
Using Okidata PCL. Also have PS
Color settings in Photoshop:
North America General Purpose 2
sRGB 2.1
U.S. Web Coated Swop v2
Dot gain 20 %
Dot gain 20 %
Preserve embeded profile
Preserve embeded profile
Preserve embeded profile
engine: Adobe (ACE)
Relative Colormetric
Tried RGB color mode and CMYK color mode, no difference
Printer settings:
Photoshop manages colors
sRGB 2.1 Printer profile
Relative Colormetric
Print setup:
Letter
Multipurpose tray
Weight: printer settings-default (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
Job Options:
Hight Quality
Color: No color matching
Printer preferences in Printer properties:
Color management
Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
ICC Profiles: Generic PnP Monitor (default)
Advanced:
Windows Color System Defaults:
everything under this tab is set at System Default
I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help. I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
Tried printing in PSE and it gave me an error that it was not a post script printer. Installed ps driver, still getting errors and it wouldn't print.
I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k LOL
Thanks! JS

You need an ICC profile for your printer. Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you. You download some software they provide, then print a test file on the exact same paper you are using for your cards. Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file. Once you have it, you'll be able to print accurate colors.
There are other services out there that may cost less, but I do not know how reputable they are. Chromix is a good business I've worked with many times.
If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble. Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

Help with photo albums Please

Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx

The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.

Need help with Project Pro

Hi,
I recently purchased few licenses for Project pro from office 365 (online version). When I log in to office 365 and go to my apps I can not see Project Pro app there? Where it might be?
Also when I create a project with desktop app, where is the option to sync that project to server? The license already included with
Project Online and Project server Sync.
Any Help solving my issues will be greatly appreciated.
Thanks in advance..

Hi,
Please see this
article for starting a project with Project Pro for Project Online.
Don't forget to use in Project Pro the email adress used for creating your O365 account.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Help with Option 3 please

A week ago I was on Option 1 but due to heavy use my speed was reduced to 15.7k/sec !.I was advised to upgrade to Option 3 which I promptly did and that was done on the 29th(last week).
My speed though is still 15k/sec and I cannot watch any streaming video or BBC News Channels etc
Would some kind gentleman please look into it for me and advise.......thankyou
Solved!
Go to Solution.

Hi Pete,
I am sorry for the delay in getting back to you. I picked your email up this morning and have dropped you a reply. I am pleased that you managed to sort this out, if you need any further help just let me know.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Help with project/folder setup for new flex project??

Hello all,
I need help deciding how to set up my projects for a new flex application we're developing.
We have an in-house custom java/jsp "framework". This framework has JSP pages for administering applications that are built using this framework. One part of the framework generates all java base and model objects from our database tables to be used in the new application.
The new application will have a back-office part (Adobe AIR) and a web facing part (Adobe Flex). Both the AIR and Flex parts of the application need to access the java model objects via AS3 classes (I believe I'll do this using remoteobject).
My questions are as follows:
After I create the base and model AS3 classes that remoteobject with the java classes can I put these in a common library project so both my AIR and Flex app can access common AS3 code. I feel I should do this to keep from duplicating code by copying the AS3 classes in both my AIR and Flex projects. Can you give my any examples or links to information on how to do this??
I plan to also create a common java project for all base and model objects generated from my db tables so that the common library project with AS3 classes could remoteobject interface with the java classes in the java project. I would like to keep all of my business logic in the java model classes. Does this seem appropriate for the projects/setup listed above?
Here are the projects I think I need in Flex Builder.
FlexWebApp
AIRBackOfficeApp
JavaApp - Common
AS3FlexLibraryApp - Common
The FlexWebApp and AIRBackOfficeApp will reference the AS3FlexLibraryApp and the AS3FlexLibraryApp will remoteobject to the java classes in JavaApp.
Any help or direction with this is greatly appreciated.
Thanks,
Whitney

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Help with UILabel subclass please

Hello all... I have a UILabel subclass I call CustomLabel. Ive been googling and reading the apple docs this entire week to figure this out. The few examples Ive seen, I dont think Im doing it right.
Im trying to create a subclass to use throughout my project. Every label will have these properties so I figured why not subclass. So through a lot of trial and error I ended up with this...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@property (nonatomic) CGSize shadowOffset;
@property (nonatomic) UITextAlignment *textAlignment;
@property (nonatomic, retain) UIColor *shadowColor;
@property (nonatomic, retain) UIColor *textColor;
@property (nonatomic, retain) UIColor *backgroundColor;
@property (nonatomic, retain) UIFont *font;
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
@synthesize textColor;
@synthesize backgroundColor;
@synthesize font;
@synthesize shadowColor;
@synthesize shadowOffset;
- (id)initWithFrame:(CGRect)frame {
if ((self = [super initWithFrame:frame])) {
self.textColor = [UIColor whiteColor];
self.backgroundColor = [UIColor clearColor];
self.font = SMALL_CHALKDUSTER;
self.shadowColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
self.shadowOffset = CGSizeMake (0, 2);
self.textAlignment = UITextAlignmentCenter;
return self;
- (void)dealloc {
[super dealloc];
@end
I then allocate a label like so...
ViewController.h
CustomLabel *myLabel;
@property (nonatomic, retain) CustomLabel *myLabel;
ViewController.m
myLabel = [[CustomLabel alloc] init];
myLabel.text = @"Blah blah blah";
I feel like Im way off on this... I must be since it isnt setting any of the properties Im trying to use in the subclass.
I found an older post on the forums here for setting the textAlignment but for some reason I couldnt apply the same logic to mine.
So can anyone help me with this subclass please and thank you?

xnav... thanks a ton for pointing me to this link. Its got me closer to my end goal than I was before. Right now I have...
CustomLabel.h
#import <UIKit/UIKit.h>
@interface CustomLabel : UILabel {
@end
CustomLabel.m
#import "CustomLabel.h"
#import "Constants.h"
@implementation CustomLabel
- (void) drawRect:(CGRect)rect {
CGContextRef ctx = UIGraphicsGetCurrentContext();
UIColor *lineColor = [UIColor whiteColor];
UIColor *shColor = [UIColor colorWithRed:0.0f green:0.0f blue:0.0f alpha:0.35f];
//UIColor *bkgColor = [UIColor clearColor];
CGContextSetFillColorWithColor(ctx, lineColor.CGColor);
CGContextSetShadowWithColor(ctx, CGSizeMake(0, 2), self.font.pointSize / 2.0, shColor.CGColor);
//CGRect drawRect = CGRectMake(rect.origin.x, rect.origin.y,rect.size.width, rect.size.height);
//CGContextSetAlpha(ctx, 0) ;
//CGContextFillRect(ctx, drawRect);
//CGContextSetStrokeColorWithColor(ctx, [[UIColor clearColor] CGColor]);
//CGContextSetFillColorWithColor(ctx, [[UIColor clearColor] CGColor]);
CGContextSetBlendMode(ctx, kCGBlendModeClear);
//CGContextAddEllipseInRect(ctx,CGRectMake(size.width-(size.width/2)-(size.width/10), (size.width/10), (size.width/2), (size.height/2)));
//CGContextClosePath(ctx);
//CGContextDrawPath(ctx, kCGPathFillStroke);
//CGContextSetTextDrawingMode(ctx, kCGTextFillStroke);
//self.backgroundColor = [UIColor clearColor];
//[self setBackgroundColor:[UIColor clearColor]];
[self.text drawInRect:self.bounds withFont:TINY_CHALKDUSTER lineBreakMode:self.lineBreakMode alignment:UITextAlignmentCenter];
- (void)dealloc {
[super dealloc];
@end
As you can see I have a couple of things commented out. LOL I still cant figure out how to make the background color clear. I also dont know if I need the dealloc in this subclass. But the other properties seem to be working like the font and line color.
Thanks again for the link and getting me in the right direction xnav. If you can lend any more assistance on how to get that darn background color clear I would appreciate it!

Logic 7.2 crashing on startup, MBP -- something to do with Project Manager

Hello
I've been trying to get my new version of Logic Pro running on my new MBP (1.83ghz) with 1.5 gigs for RAM. Upon start-up, Logic always crashes with an error window saying something to the effect: wrong version of Project Manager database.
I've just reinstalled Logic and it didn't fix anything. Neither has repairing disk permissions.
Appreciate any advice,
Craig

Hello and thanks for your responses:
I've just trashed and reinstalled 7.0 then 7.2, still getting the same crash. Can you please tell me where the PMdatabase prefs are stored. I'll try deleting them. I just deleted every Logic pref I could find, but still no change to the crash.
cheers,
Craig

[Solved]Need help with backup-manager

So I'm trying to set up backup-manager to make.. well, backups. Their wiki has been shut down thanks to spammers, and ours has no specific entry for backup-manager, so I will have to do it with its man page and the (well documented) config file. However, I still have some questions. Sorry in advance for the amount of questions and the length of the topic. I just wanted to get this clear in one go.
First: I want to make a *full* system backup, so that I can restore my system in case of breakage without reinstalling. When I looked at creating backups in the past, I noticed some folders don't necessarily had to be backupped. What folders in / could I skip?
Second: I chose the tarball backup format. Would it then be safe to comment out all the other variables (for tarbal-incremental/mySQL) backups?
Third: Now there were some parts of the config file that I didn't understand. I hope you can explain some of those parts to me.
# Number of days we have to keep an archive (Time To Live)
export BM_ARCHIVE_TTL="5"
That means the archive it creates will be removed after 5 days - but what if I copy it to my external hard disk? I don't think it will delete it then, so would it be safe to comment this out - or what will it do if I just keep it this way?
# At which frequency will you build your archives?
# You can choose either "daily" or "hourly".
# This should match your CRON configuration.
export BM_ARCHIVE_FREQUENCY="daily"
I either want to make a backup when I want to, or weekly - not hourly or daily. Is this possible with backup-manager?
# Do you want to purge only the top-level directory or all
# directories under BM_REPOSITORY_ROOT?
export BM_REPOSITORY_RECURSIVEPURGE="false"
I don't understand that option. Could you explain me what it will do? Info: BM_REPOSITORY_ROOT is set to my home folder. It's the place where the archives are stored.
# Do you want to replace duplicates by symlinks?
# (archive-DAY is a duplicate of archive-(DAY - 1) if they
# are both the same according to MD5 hashes).
export BM_ARCHIVE_PURGEDUPS="true"
Will this harm anything in my system?
# Do you want to dereference the files pointed by symlinks ?
# enter true or false (true can lead to huge archives, be careful).
export BM_TARBALL_DUMPSYMLINKS="false"
This would 'destroy' all symlinks, no? I'm going to keep this at false, but I would like to know.
Last edited by Unia (2011-08-29 18:19:37)

Tried to do a selective upgrade & broke something this morning so I tried restoring my CompleteRaid0 backup, worked like a charm.
This is the latest backup script I'm using:
#!/bin/sh
# Little script to tar up the important root folders.
# To untar, use:
# tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
echo "Do you want to clear pacman's cache before tarring up the root folder? This will save time in both the tar- and untar process."
echo -n "(y|N) > "
read a
if [[ "$a" = "n" ]] || [[ "$a" = "N" ]] || [[ "$a" = "" ]]; then
echo "Pacman's cache will not be cleared."
else
echo "Pacman's cache will be cleared now, please wait..."
pacman -Scc --noconfirm
echo "Pacman's cache succesfully cleared. Continuing now..."
sleep 2s
fi
DATE=`date +%m%d-%H%M%S`
CB=CompleteRaid0-$DATE.tar.gz
NB=FreshInstall-$DATE.tar.gz
echo "********************************************************************************"
echo "Proceeding with Fresh Install backup $NB."
echo "********************************************************************************"
sleep 5
cd /
tar -cvpzf $NB --one-file-system \
/boot \
--exclude=/$NB \
--exclude=/dev \
--exclude=/etc/fstab \
--exclude=/home \
--exclude=/lost+found \
--exclude=/media \
--exclude=/mnt \
--exclude=/proc \
--exclude=/root \
--exclude=/sys \
--exclude=/tmp \
mv $NB /home/chuck/Backups/
echo "********************************************************************************"
echo "Sleeping for 10 seconds."
echo "Proceeding with complete backup $CB."
echo "********************************************************************************"
sleep 5
tar -cvpzf $CB --one-file-system \
/boot \
--exclude=/$CB \
--exclude=/tmp \
--exclude=/mnt \
mv $CB /home/chuck/Backups/
echo "********************************************************************************"
echo "Backups Complete"
echo "********************************************************************************"
sleep 10
exit 0
Restored it with this:
#!/bin/sh
# To untar, use:
# tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
tar -xvpzf /home/chuck/Backups/now.tar.gz -C /
mkdir /proc \
/lost+found \
/sys \
/mnt \
/media \
/mnt/bind/Downloads \
/mnt/bind/Pictures \
/mnt/bind/Maintenance \
/mnt/bind/Music \
/mnt/bind/Backups
exit 0
Of course the directories already existed so that part was unnecessary & only needed if I had restored onto a fresh installation.

Help with project management, please?

Similar Messages

Maybe you are looking for