Help with Search Result Query Builder (CSWP)

Greetings,
Is there a way to limit the number of search results returned based on each property value? Hard to phrase my question, so I'll give my example.
I have a Content Search Web Part that is returning results from a specific list that has a column called Category with 6 options (ex, A, B, C, D, E, F). I want my query to return the newest 4 items by date that are tagged from each category value.
So, latest 4 items tagged with A, latest 4 tagged with B, etc. My CSWP would return 24 items from the query.
Hope that makes sense. So, is this possible through the Search query?
Thanks!
-B

Hi Brian,
Per my knowledge, it is impossible to do via Search Query in Content Search web part.
As a workaround, you can add a Refinement Web part into the page, then click the refiner to filter each options to display the latest associated four items.
You can do as the steps(assuming I create a list with a column called “testCategory”, like your Category column ):
Do a full crawl for the content source.
Create a managed property called “testCategory” to map it to the crawled property
ows_ testCategory.
Then do a crawl again for the content source.
Go to a page, add a Refinement web part and a Content Search web part into the page.
Edit the Refinement web part->Choose Refiners, add testCategory under
Available refiners into Selected refiners.
Remove other refiners except testCategory, click OK and OK.
Edit the Content Search web part->Change query.
Select a query: Local SharePoint Results, and the Query text is : Path:<the URL of the list>
Click SORTING tab, and Sort by: LastModifiedTime(Descending), click OK.
Under Change query, Number of items to show: 4.
Click OK, and save the page.
The result is like:
After Clicking A, we can see the latest 4 items related to A:
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

Search Results Query Text - Get all data, Exclude all list data except one

Hi Experts,
I have a situation wherein in the global search of our internal site, we have to display all results & restrict any list item except one list. Earlier we had restricted /Lists/ & People to be displayed in the results.
But in the new search results I have to display results from only one list along with other results (documents, sites, pages etc).
Below is the original query text entered in the Search Results Query Text editor
{searchboxquery} -contentclass:STS_List_Links
-filename:allitems.aspx -Path:/articles/Pages/default.aspx
-filename:DispForm.aspx -Path:/Lists/ -Path:person.aspx
I have tried various different queries with AND, OR operator. I have researched other blogs, sites over google. But unsuccessful. I am sure this is not a rare requirement. Need your expert help.
I have tried this query also...
{searchboxquery} (-filename:allitems.aspx -Path:/articles/Pages/ -Path:/Lists/ -Path:/PublishingImages/) OR
(+(+Path: /Lists/ArticleContent/ AND +filename:*.aspx) AND
-(-Path: */Lists/* OR -filename:*.aspx))
Vighnesh Bendre
MCTS
http://markviky.blogspot.com

Vighnesh,
You should have success using the following:
{searchboxquery} -contentclass:STS_List_Links -filename:allitems.aspx -Path:/articles/Pages/default.aspx -Path:person.aspx ((-filename:DispForm.aspx -Path:/Lists/) OR Path:/Lists/ArticleContent/)
Two things from your original query were excluding list items from your results, your exclusion of file
DispForm.aspx and path Lists. By using "OR" in the above query, we're creating an exception to also allow items under
Lists/ArticleContent to be included in the results.

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Help with an SQL Query on the Logger

We are running UCCE 8.5(3) and need help with an SQL query. When I run the below I would also like to see skill group information(name preferably)? Any help would be greatly appreciated!
select * from dbo.t_Termination_Call_Detail where DateTime between '10-11-2012 00:00:00:00' and
'10-11-2012 23:59:59:59'

David, thanks for replying. Unfortunitly I don't know enough about SQL to put that into a query and have it return data. Would you be able to give an example on what the query would look like?

Using "Restrict by app" in change query causes issues with Search Results

Hello!
I am hoping some experienced SP admin can help me out. I am having issues with the relevance ranking for my search results web part.
I created a Wiki (OOTB) within a site collection and on the home page of the Wiki I was looking to apply a Search Box and Search Results web part for easy searching. I wanted to ensure the search results were restricted to the scope of the pages within the
wiki. I did the following after adding the 2 web parts:
Entered edit mode for the page
Started to edit the Search Results web part
Under Properties for Search Results clicked on "Change Query"
Navigated to BASICS and clicked "Switch to Quick Mode"
For Select Query, picked "Wiki (System)" option
For Restrict by app, picked "Specify a URL" and input the wiki URL "http://webapp.com/sites/sitecollection/wiki"
Click OK
The web part has 6 automatic results when I hit the page. These are the only 6 pages in my wiki. When I search a word or title of a page, they are not ranked in order or relevance. The ordering is static to what was being shown before the search, but the
keywords I'm searching are bold. With out the taking the steps above, I can easily search these pages and have them ranked appropriately so I'm not too sure what I'm doing wrong.
Other Details
The pages have been crawled and can be searched from anywhere else in SP.
I am only a site collection admin for this specific site collection.
I other than the steps above, I have not made any changes or customization to the search web parts; they are both out of the box SP.
The SP Farm admin we unable to pin point what the root cause is either.

Hi Mikael,
Sorry for the wait, I was unable to post pictures, which i felt would better describe my issue.
Could you output the query template you are ending up with?
If you can tell me how to accomplish this, then I can provide it. Please keep in mind that I am only a site collection admin.
Also, is the ranking/sorting for your webpart set to ranking?
When looking at the web part settings, I didn't see an option to modify the ranking. Unfortunately, some sites in my intranet are down now so I can't even double check. Once it's back up, I will verify this as well.
And how do you know they are ranked incorrectly?
I wanted to display an image showing what I meant by this. As the wiki is down, I'll do my best with words. When I visit the wiki home page, I already have the search and search results web parts there. Without searching anything, the search results
web part displays 6 pages that are available in the wiki. When I search, I expect to see the most relevant result at the top. similar to the following:
*Search result from another section of the intranet site.*
What I receive instead is the same list of wiki pages, in the same order. The most relevant result
is not moved to the top like in the image above, but I can see that the word "rush" is highlighted in bold. I hope this helps.
If you need more of a description, please let me know.
Thank you

Problem with Search Results do not appear consistantly except for farm administrator

We have Server farm with multiple web applications hosted on 443 port, all of them available over internet for the authenticated company users to use.
When a user searches for a content on the search box on the visited page, some/many users get no results for the first time clicking on the search box, if they refresh the page or search again, it might return the results. Again clicking on next page or
page number button it goes empty. Refreshing the page shows the current page. When Farm Administrator searches, consistantly he gets the results (though the count of results increases/decreases as he changes the page number.
Web application is on Windows Claims and Only (Default Zone) entry in Alternative Access Mapping is
https://subdomain.domain.com, this is same for all applications.
1) Can I get rid of the issue by / Effect of adding local IP Addresses on Intranet Zone?
2) Will Crawl have any effect on using the Public Domain for Crawling?
Kindly Advise.

Hi Vasudev,
Based on your description, my understanding is that there are no search results when the users search for the first time.
I recommend to check the things below:
Use the public URL of the default zone in the content source in Search Service application.
Use fiddler or F12 tool to check the requests when doing search in SharePoint site to see if the query request has been sent successfully.
Check ULS log to see more detailed error message. For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
You do not need to add the local IP address on the intranet zone.
If you use Public domain URL for crawling, then the results returned will show with the URL of public zone even if you do search in the internal zone.
https://technet.microsoft.com/en-us/library/dn535606(v=office.15).aspx#BKMK_CrawlDefaultZone
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

CS5 Photoshop Offline Help No Search Result Malfunction

In summary the Adobe Community Help application or the "Launch Help in Browser" functions wont return any search results for the Adobe Photoshop CS5 OFFLINE reference.
I use my main design machine off the net. It's not often I reach for the help text, but I got a wierd problem when I did. I'm bang up to date with all CS5 updates and all the help content for CS5 has been downloaded and is flagged correctly as local and is up to date. (I've even tried unticking all the local CS5 help refferences in the options and re-downloading them).
If I search for say "brush" in the PS help, with the option "Local" selected, I get NO results! (and yet the help text / manual is clearly visible in the right hand pane of the "Adobe Community Help" application). If I try to use the "Online" option, that has no problem returning results.
Q: Why doesn't Adobe Community Help return ANY search results for ANY query searched on the PS5 local help?
The local search works (or appears to) for the other local refferences like Fireworks or Encore. Just not Photoshop.

Hi Zeno, thanks for you reply, but I don't think you fully read my issue.
I'll post you some images and then you can see what I'm talking about:
As you can see the correct options are selected.
As you can also see the help has downloaded and is "Current".
As you can see when I search for something as simple as "brush" the "Adobe Community Help Application" returns nothing, lol.
Cheers.

New to Fios - So confused how to find anything on!!! - Need help with search

Been with Comcast for years and years and just switched to Fios. With all the channels and various buttons on the remote I'm overwhelmed with trying to figure out what's actually on.
I understand how to use the search feature to find a show or theme, but what I can't figure out is how do you see a list of results for just programs that are currently on??
It seems the search results are listed in order of channel name and there is nothing on the list that I see that shows which ones are currently on. I find myself going thru the list, constantly pushing the right arrow key on the remote just to then find out the show is on later in the day or another day.
Please help!
Thanks,
Vince

The best way to see what's on now is simply to press Up on the remote to bring up the half-screen guide, then use the Ch + and - buttons to quickly scan through it.
Not the solution you wanted. Perhaps you should suggest it in the Ideas forum.

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Help with creating reports - Report Builder 6.0.8.11.3

Helllo!
I’m using report builder 6.0.8.11.3 and the operating system is Unix, and the result is a character text file.
Now imagine the following situation, I need to send to a letter to several companies. That letter has some lines of introduction, in the first page, as well as the company address. Below this introduction I pretend to put a list of employees and each one info. Each employee info has four lines of size. And the list can grow from one person to hundreds, which makes the letter grow from one page to more.
This is simple to do it. The problem is that I need to know and to use in the letter, the number of current page and the total number of pages for each company.
This letter has two kinds of pages (one with the introduction text and some employees and other with employees only), and I need to know the number of employees for each page, to calculate the total number of pages. I have the propriety “max register number per page” but is useful for a page. Assuming that I get the total number pages using some PL/SQL.
Can you have any other solution? Or give me some help with this one?
Thanks.

Hi
I have problem in RTF output.How can I get this patch3 file.I am
not able to log on to "ftp.oracle".
Please help.
Vijay

Trouble with search results landing page

Hello. I am having problems with my search results page linking correctly. I get the error that the page can not be found.
http://highestgood03.businesscatalyst.com/_blog/Highest_Good
What am I doing wrong? Any help will be appreciated. Thanks!

Perfect! Thanks for your help.
I have another question. Right now for my search results I have {tag_image} inserted. It is currently rendering a picture of a pencil.
How do I change the image? Is it possible to have a unique image for each blog posts? Thanks!

Help with Inner Join query in SQL

Hope someone can help with this, as this is quite an involved project for me, and I'm just about there with it.
My table structure is :
table_packages
packageID
package
packageDetails
etc
table_destinations
destinationID
destination
destinationDetails
etc
table_packagedestinations
packageID
destinationID
..so nothing that complicated.
So the idea is that I can have a package details page which shows the details of the package, along any destinations linked to that package via the packagedestinations table.
So this is the last part really - to get the page to display the destinations, but I'm missing something along the way....
This is the PHP from the header, including my INNER JOIN query....
PHP Code:
<?php
$ParampackageID_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
$ParamSessionpackageID_WADApackages = "-1";
if (isset($_SESSION['WADA_Insert_packages'])) {
$ParamSessionpackageID_WADApackages = (get_magic_quotes_gpc()) ? $_SESSION['WADA_Insert_packages'] : addslashes($_SESSION['WADA_Insert_packages']);
$ParampackageID2_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID2_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
mysql_select_db($database_connPackages, $connPackages);
$query_WADApackages = sprintf("SELECT packageID, package, costperpax, duration, baselocation, category, dateadded, agerange, hotel, educational_tours, field_trips, corporate_outings, plant_visits, budget_package, rollingtours, teambuilding, description, offer FROM packages WHERE packageID = %s OR ( -1= %s AND packageID= %s)", GetSQLValueString($ParampackageID_WADApackages, "int"),GetSQLValueString($ParampackageID2_WADApackages, "int"),GetSQLValueString($ParamSessionpackageID_WADApackages, "int"));
$WADApackages = mysql_query($query_WADApackages, $connPackages) or die(mysql_error());
$row_WADApackages = mysql_fetch_assoc($WADApackages);
$totalRows_WADApackages = mysql_num_rows($WADApackages);
$colname_educationalDestinations = "1";
if (isset($_GET['PackageID'])) {
$colname_educationalDestinations = (get_magic_quotes_gpc()) ? packageID : addslashes(packageID);
mysql_select_db($database_connPackages, $connPackages);
$query_educationalDestinations = sprintf("SELECT * FROM destinations INNER JOIN (packages INNER JOIN packagedestinations ON packages.packageID = packagedestinations.packageID) ON destinations.destinationID = packagedestinations.destinationID WHERE packages.packageID = %s ORDER BY destination ASC", GetSQLValueString($colname_educationalDestinations, "int"));
$educationalDestinations = mysql_query($query_educationalDestinations, $connPackages) or die(mysql_error());
$row_educationalDestinations = mysql_fetch_assoc($educationalDestinations);
$totalRows_educationalDestinations = mysql_num_rows($educationalDestinations);
?>
And where I'm trying to display the destinations themselves, I have :
<table>
        <tr>
                 <td>Destinations :</td>
            </tr>
           <?php do { ?>
        <tr>
             <td><?php echo $row_educationalDestinations['destination']; ?></td>
        </tr>
        <?php } while ($row_educationalDestinations = mysql_fetch_assoc($educationalDestinations)); ?>
</table>
If anyone could have a quick look and help me out that would be much appreciated - not sure if its my SQL at the top, or the PHP in the page, but either way it would be good to get it working.
Thanks.

First off, you need to get the database tables so that there is a relationship between them.
In fact, if there is a one to one relationship, then it may be better to store all of your information in one table such as
table_packages
packageID
package
packageDetails
destination
destinationDetails
etc
If there is a one to many relationship, then the following would be true
packages
packageID
package
packageDetails
etc
destinations
destinationID
packageID
destination
destinationDetails
etc
The above assumes that there are many destinations to one package with the relationship coloured orange.
Once you have the above correct you can apply your query as follows
SELECT *
FROM packages
INNER JOIN destinations
ON packages.packageID = destinations.packageID
WHERE packages.packageID = %s
ORDER BY destination ASC
The above query will show all packages with relevant destinations

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Help with a PowerPivot query

Hi,
I've got a server audit log in PowerPivot (114,000 rows) which I provide some basic reporting from (PowerPivot is not my specialist subject so go easy). What I now need to perform a Distinct filter, but can't get the logic right. Basically the log
as two bits of information, 1) is the source of the job and 2) if it was a success or failure. What I need to do is to find all of the Source items that have never completed sucessfully. Any ideas on what formula is best to use, or
do I need to split in to multiple sheets and create a table relationship?
Source,Status
======,======
Source1,Fail
Source1,Fail
Source1,Success
Source2,Fail
Source3,Fail
Source3,Success
So in the above example, I would only expect the filter to show me Source2
Thanks
Alex

Hi Alex,
using Power Query instead, it would work like this:
Once you've pushed your table to PQ, add a column "helper" with value=1.
Then pivot on "Status", taking "helper"-column into "values column"
(hope translation is understandable, as I'm using localized Version & translation via "Quick info" isn't working in the PQ menu)
Then filter on column "Success" = blank.
Imke

Help with a group query

I have the following table
EX_ID
EX_NAME
EX_SURNAME
EX_FLAG
1
TOM
JONES
Y
1
JIM
SLIM
N
1
BO
SELECTA
Y
2
AIRES
BEARS
N
2
JIM
DAVIES
Y
3
PAUL
BALL
N
3
YOU
KNOW
N
I need to create a query that only displays one of the ex_id’s, it doesn’t matter which one. When the query has been run it will look like below:
EX_ID
EX_NAME
EX_SURNAME
EX_FLAG
1
TOM
JONES
Y
2
AIRES
BEARS
N
3
YOU
KNOW
N
Can anyone help with this query?

SELECT * FROM
SELECT *,ROW_NUMBER () OVER (PARTITION BY ex_id ORDER BY (SELECT 0))
FROM tbl
) AS Der WHERE rn=1
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Help with Search Result Query Builder (CSWP)

Similar Messages

Maybe you are looking for