Help with Sunray 2FS setup

Info:
Sunray server: Solaris 10 running SRSS 3.1
Client: Sunray 2FS
Problem:
The login prompt is split between the two screens. Is it possible center just the login dialog box on one screen and resume dual display mode after login?
Thank you.

Hi There.
We're using Sun Ray 2FS clients here in-house ON Win 2k3 Enterprise via. SRSS 4.1. There is no way you can move the login box to be on one monitor or the other. It will always be in the middle as the Sun Ray picks up the 2 monitors to be one large monitor (as already explained above this post).
We have found a program called Splitview to be really effective for the Sun Ray 2FS Setup as the program will effectively allow programs to be on one monitor or the other in maximised mode, rather than being spread across both.
Splitview works after login has happened and not before.

Similar Messages

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

Help with Project Management setup from very basics...

hi all!
i am new to e-business suite and now i have installed vision demo database successfully on a Quad Core with 320 GB hard and 4 GB ram...now i need help to setup Project Management (PM) module for a hypothetical construction company with the required functionalities (just limited functionalities and Not complete functionalities as in EBS).i need help in setting up Project Management module from the very basics...so can you help me out in this...thanks in anticipation

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Help with project/folder setup for new flex project??

Hello all,
I need help deciding how to set up my projects for a new flex application we're developing.
We have an in-house custom java/jsp "framework". This framework has JSP pages for administering applications that are built using this framework. One part of the framework generates all java base and model objects from our database tables to be used in the new application.
The new application will have a back-office part (Adobe AIR) and a web facing part (Adobe Flex). Both the AIR and Flex parts of the application need to access the java model objects via AS3 classes (I believe I'll do this using remoteobject).
My questions are as follows:
After I create the base and model AS3 classes that remoteobject with the java classes can I put these in a common library project so both my AIR and Flex app can access common AS3 code. I feel I should do this to keep from duplicating code by copying the AS3 classes in both my AIR and Flex projects. Can you give my any examples or links to information on how to do this??
I plan to also create a common java project for all base and model objects generated from my db tables so that the common library project with AS3 classes could remoteobject interface with the java classes in the java project. I would like to keep all of my business logic in the java model classes. Does this seem appropriate for the projects/setup listed above?
Here are the projects I think I need in Flex Builder.
FlexWebApp
AIRBackOfficeApp
JavaApp - Common
AS3FlexLibraryApp - Common
The FlexWebApp and AIRBackOfficeApp will reference the AS3FlexLibraryApp and the AS3FlexLibraryApp will remoteobject to the java classes in JavaApp.
Any help or direction with this is greatly appreciated.
Thanks,
Whitney

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Need Help With ACS LDAP setup to Query AD

I have 2 Win 2003 ADs, one of them is configured and working under Windows Database (using remote agent) configuration. I am trying to setup the second AD with Generic LDAP setup. I want to know what exactly I should use in the fields UserObjectType and Class, and GroupObjectType and Class for Windows 2003 AD. All Cisco documents give example of Netscape LDAP syntax. I was told by our server admin. what to put under Admin DN, CN=myid,OU=mygroup,OU=myorg,DC=mydomain,DC=com
I have both user & group directory subtree fields filled with DC=mydomain,DC=com.
I am using the ip address for Primary LDAP server, and port is 389, LDAP version 3 is checked.
Is any of these DC, OU, etc. case sensitive?
With all entries that I have tried, when I go to map a group, I am getting error "LDAP server NOT reachable. Please check the configuration". My ACS can ping the domain controller's IP address fine.
Please help. Thank you in advance,
Murali

Murali,
These references may help...
http://download.microsoft.com/download/3/d/3/3d32b0cd-581c-4574-8a27-67e89c206a54/uldap.doc
http://www.microsoft.com/technet/archive/winntas/plan/dda/ddach02.mspx?mfr=true
http://technet.microsoft.com/en-us/library/aa996205.aspx
Regards,
Richard

I need help with proper DNS setup for 10.5.8 Server

I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

Help with Mail Server Setup/DynDNS

I don't have a static IP so I setup an account/registered a domain with DynDNS. The test site is hosted fine via Leopard Server. However, I am trying to setup a mail server to no avail. Configured Mail Server through the assistant and ended up with these settings: domain name - performa460.com hostname - mail.performa460.com POP, IMAP, and SMTP all enabled. Setup a user in workgroup manager and enabled mail. Still Cannot access mail through Mail.app and no users are listed on the Maintenance/Accounts pane. Obviously I'm new to this and need to be pointed in the right direction. Any help is apreciated; thanks!

DynDNS's base service won't work for you if you want to use your own full domain name unless you use their Custom DNS paid service. I'm assuming this is something you've already done. If so, you need to configure both the host name and the MX records for your domain to point to the right places. You'll need to set up DynDNS name servers through whatever domain registrar you use and then configure the CustomDNS service through DynDNS's web interface. Once you can successfully connect using a web browser, then look into your mail settings.
However, depending on what provider you're using for your broadband, you may have the mail ports blocked by your ISP and/or in your cablemodem/router. Be sure to open 25 and 587 and any other ports you intend to use.
Finally, you may find that even if you've configured everything correctly, other providers will refuse your mail as spam (google, yahoo, etc) because your IP address is on a "residential subnet" or because your forward and reverse DNS don't match. That means you'll need a mail reflector to bounce your mail off of with a proper IP. DynDNS has inbound and outbound mailhop services that you can use for an additional fee.
Bottom line is, because spambots inhabit a lot of dynamic IP blocks, you have to jump through a ton of hoops to get it working reliably.

Help with Proper DNS Setup for Leopard Standard Server Setup

Hello All,
Problem Description-
I was reviewing some training today on DNS setup and checking for proper setup with the sudo changeip - checkhostname tool and I seem to have an incorrectly configured DNS setup. So I need some help on correcting it. When I go to the "Server Preferences" tool I cannot log in using apple.ourdomainname.com instead in order to use the tool I have to input localhost as the server name. Now I just thought that the system was broken or something and with the help of my training I now see it's a DNS problem. I thought I had everything proper since I followed the steps of creating proper DNS/RDNS entries with my ISP. Now I am stuck wondering what else isn't working properly due to the DNS issue. Thanks in advance.
Technical Info-
My ISP provides us with 5 static IP's and we have asked them to create entries and verified the setup of apple.ourdomainname.com = x.x.x.x which is one of our public IP's assigned currently assigned to the WAN port of our Apple Airport Extreme. We have also had them create a PTR record which also is present, verified and functional. Our MacMini running 10.5.5 is connected directly to one of the ethernet ports on our Apple Airport Extreme which is our NAT/Firewall for the LAN. So during the setup of the Standard Server install the OS configured the Airport with the required ports for chat/web/vpn. And mobile Mac's can VPN in and gain folder access and web works fine too. We don't use the e-mail portion so I can't say how that works. The server is using the DNS of 10.0.200.1 which is the IP of the Airport and the airport is programmed with the DNS of OpenDNS servers 208.67.222.222 and 208.67.220.220. The reason for this whole long shpeal is that I want to give as much technical background as possible for the best possible help.
Thanks
DM

What happens when you use 'Localhost' instead of 'localhost' (i.e. capitalizing the 'L')?

PLEASE Help with Newsletter Page Setup

Hello all,
I am working on trying to re-create a newsletter using InDesign for a client who had previously done all "design" in Microsoft Word.
It's admittedly been awhile since I've done much page layout or work with imposition, and my brain is completely cramping when trying to figure out the correct way to set things up first of all, and then to send the finished file to the print vendor for output.
Here's what I know...
The newsletter is to be printed two-up (according to printer) on 17"x22" sheets of paper, with printing on both sides.
When folded, and with all contained pages stapled together along the fold, each page of the finished newsletter is to be a full 8.5"x11" in size.
Currently, I am working within a Document Setup of "Facing Pages" at 8.5"x11" in size, but have a feeling that either this is: a.) not correct, or b.) not the most efficient way to get what I'm looking for; possibly it's both!
I would be EXTREMELY grateful for any insight, help, and guidance you're willing and able to provide me with.
Many thanks, in advance!

Sorry, Bob.
I'm trying my best to be clear, but simaltaneously include as much information as possible. Perhaps my wording is what's fogging things up. I'll try to re-hash:
The FINISHED SIZE of the newsletter is 8.5"x11". To you, the reader, this 8.5"x11" would be the size of each page.
The PAPER SIZE of the newsletter is 17"x22". The printer will be printing two-sided (front and back) and two-up on each 17"x22" sheet of paper.
Once printed, each 17"x22" sheet will be folded in half to essentially created 4 readable newsletter pages at a size of 8.5"x11". The folded sheets are fit inside of each other in the correct order and stapled along the fold into sort of a booklet.
Hopefully this helps.
Again, I am essentially looking for help regarding two separate questions:
What Document Setup will I want to work in as the designer?
What steps do I need to take once my layout is finished to get the printer a two-up imposition in PDF format that will achieve all of the above? This is what he has asked for.
Thanks again!

Need help with Pixi Plus setup on Telstra Australia

If any one can help i would be very grateful.
I'm in Australia and wanted to try out a WebOS phone as a replacement for my Treo 680.
I did the research and found that AT&T GSM phones will work here in Australia.
I found a new unactivated Pixi Plus on eBay, as it was the same WebOS as Pre thought i would give it a try and bought it.
So my new Pixi Plus arrived three weeks ago, put my sim in and found it was locked to AT&T. I rang AT&T and was told it will be locked till end of December because of there system. The eBay seller said it was locked and may be able to be unlocked.
I found a way around this problem as i didn't want to wait that long.
I ordered a Rebelsim Card that arrived a few days ago, put it in and seems to work. Now have Telstra Mobile in the top corner.
Now my problem really starts.
I can't get onto the web to activate and set up my '' cloud ''
My phone is asking for APN:
I have tried:
telstra.iph
telstra.internet
Nothing works.
I can't get out of this screen without a APN:
This APN: thing i didn't find out untill i got the phone. Can't find much info at all on the subject.
Why is Palm making it so difficult, don't they want to sell phones.
Had no problems with my 650 and 680's bought form overseas.
Can anyone point me in the right direction please.
Thanks
Peter
Post relates to: Pre Plus p100una (AT&T)

Called Sonos, they got me all setup.

Help with ios LDAP setup for VPN access

I am trying to move Microsoft LDAP for my vpn setup to an ISR router with 15.1 code . It has support but very little doccumentation. Anyone configured this before? i need some help or basic config.

Ldap authentication started from 7.1 if I recall correctly along with LDAP mapping which helps you validate whether the user has the dial in attribute on or of. I would say starting from 7.1 till the latest 8.X version.
Version 6.X does not have this feature.

Help With Classroom Lab Setup

Here's my current setup:
24 Stations - Mac Mini
1 Server - Mac Mini OS X 10.8
1 Teacher Station Mac Mini OS X 10.8
The 24 stations are configured to NetBoot.
Here's the problem:
I am teaching a new class that requires software that is Windows based. Which requires a component to be on a server. The company is getting back to me as to whether that can be on the Mac Mini Server or not.
I'm thinking of ditching the NetBoot altogether and using bootcamp for getting Windows on the Macs. My concern with ditching the NetBoot is that if students mess with the system (delete wrong files, change settings, etc) it won't be in order the next time they login or for that matter the next class period. Are all of the settings linked to their user account like it is with the NetBoot option? In other words, if I don't NetBoot will my computers be ok and stay that way? Will I have to install DeepFreeze and would it have to be on both boots Windows & OS X?
I currently use Apple Remote Desktop to monitor student work during class, but know ARD has many more features. Can my concerns be handled with ARD?
I can try to provide more clarification if needed. I need to make this happen very soon and would have to do it as inexpensive as possilbe. I'm looking for any help I can get. On-site help would be super awesome, but would have to be pro-bono.

I'd look at BDAqua's suggestion first. For years I used a setup similar to yours but today we have a central Windows server. After playing with several different scenerios I wound up creating a classroom account on the lab computers and use a program called MacApp Blocker to control what programs are useable by each class. Since the classroom accounts aren't admin accounts students cannot delete OS or Application files but they could delete or otherwise mess with the Library folder of their classroom account. I've not yet had this happen but it is possible. I miss the power that NetBoot provided.

Help With Linksys WRT310N setup

Hello,
I just changed my router to Linksys WRT310N. However, I have a problem with the router that keep lost connection. I have to restart by unplug the cable for 20 sec and plug in again to get back the connection. I dont know where is the problem. Is there any setup so I can get better connection ?
Tim

#1 How is your computer connected to this router (Wired or by wireless)?
#2 What router where you using before this problem happened?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Need help with QoS config/setup for my home network.

I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank You

I can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa                         Authentication, Authorization and Accounting.
access-list                 Add an access list entry
alias                       Create command alias
arp                         Set a static ARP entry
banner                      Define a login banner
boot                        Boot Commands
buffers                     Adjust system buffer pool parameters
cdp                         Global CDP configuration subcommands
cgmp                        Global CGMP configuration commands
class-map                   Configure QoS Class Map
clock                       Configure time-of-day clock
cluster                     Cluster configuration commands
default                     Set a command to its defaults
default-value               Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable                      Modify enable password parameters
end                         Exit from configure mode
errdisable                  Error disable
exception                   Exception handling
exit                        Exit from configure mode
file                        Adjust file system parameters
help                        Description of the interactive help system
hostname                    Set system's network name
interface                   Select an interface to configure
ip                          Global IP configuration subcommands
line                        Configure a terminal line
logging                     Modify message logging facilities
mac-address-table           Configure the MAC address table
map-class                   Configure static map class
map-list                    Configure static map list
mvr                         Enable/Disable MVR on the switch
no                          Negate a command or set its defaults
ntp                         Configure NTP
policy-map                  Configure QoS Policy Map
power                       power configuration
priority-list               Build a priority list
privilege                   Command privilege parameters
queue-list                  Build a custom queue list
rmon                        Remote Monitoring
scheduler                   Scheduler parameters
service                     Modify use of network based services
shutdown                    Shutdown system elements
snmp-server                 Modify SNMP parameters
spanning-tree               Spanning Tree Subsystem
stackmaker                  Specify stack name and add its member
tacacs-server               Modify TACACS query parameters
tftp-server                 Provide TFTP service for netload requests
time-range                  Define time range entries
udld                        Configure global UDLD setting
username                    Establish User Name Authentication
vmps                        VMPS settings
vtp                         Configure global VTP state

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

Help with Sunray 2FS setup

Similar Messages

Maybe you are looking for