Help with the itunes Programme PLEASE!

I would like to transfer my itunes programme and all its contents (Library etc..)to a WD Diagnostic External Hard drive to free up memory space on my computer but am unsure how to go about it without deleting my Library.
Any ideas would be greatly appreciated and please bare in mind, I am not as literate in the computer language as many of you may be. Nice and simple please. Could you please advise how I would be able to recall this from the External Hard drive to upload new music.
Cheers
Message was edited by: raromania

Tip. When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu .
Troubleshooting advice can depend on that information.
Which OS X is installed?

Similar Messages

Apple id has not been used with the itunes store-please review your account information

Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.M

This is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet.

"This Apple ID has not yet been used with the ITunes Store" Please review your account information.

I keep getting a message saying "This Apple ID has not yet been used with the ITunes Store" Please review your account information. Which I have and nothing happens - keep getting the same message. Please HELP me !!! My daughter is very upset that she can't download music or games onto her new IPOD.

I solved my problem by installing all updates for Windows from the Windows Update website. Hadn't done this for quite a while, once all updated. got the same message but then selected 'Review' after getting the 'Review your account information' button, then selected continue on next page and it took me to the billing account page, once that was set up, all was fine.

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Help with the iTunes store on Mac, Please!

Hi, Iv'e got an iTunes '11 on my Mac but the iTunes store won't load. It just shows the apple logo. However, the store works fine on my iPod Touch. How do I fix this?

Tip. When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu .
Troubleshooting advice can depend on that information.
Which OS X is installed?

Some help with the 10g install, please.

Hi,
We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
If someone could kindly read over some of our concerns, we'd appreciate it.
First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
Any help with steps would be very helpful to us. We're getting error messages like this:
The installation of Oracle Database 10g was successful, but some
optional configuration assistants failed, were cancelled or skipped.
Please check
'/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
for more details.
UnsatisfiedLinkError exception loading native library: njni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Thank you in advance for your help.

Hi,
You are installing in same ORACLE_HOME?
Your Operation System is UNIX?
Eder

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

Help with the iTunes 9, transferring music from older version.

I have a 2nd generation iPod Nano. I have a new laptop and attempted to download iTunes to manage my music library. I don't listen to the music on the computer just purchase from iTunes and then Sync with my iPod. I'm not good at techology. When I downloaded iTunes onto my new laptop, it deleted all my playlist but my songs are on my iPod just in numerical order.
I cannot get my Music from my iPod to transfer to the current version of iTunes. I am able to select Sync my iPod and it said Do Not Connect but nothing happpened with my iTunes library. Also, I purchased a song from iTunes and it will not transfer to my iPod.
Any suggestions other than to keep using my old laptop? I'm not even sure if the Music Library is set up on that computer because in the process of attempting to set up on the new laptop I select to move my Library to the new laptop.

Syncing music is a one way street with the iPod and that is from iTunes to the iPod and NOT the other way around. The only exception to this rule is with iTunes purchases. You can transfer them back to iTunes by plugging the iPod and choosing File -> Transfer Purchases.
Otherwise, see this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Help with the alarm clock, please!

i'm using the ipod mini, and every morning the alarm clock goes off with the exact same song. is it possible to make the mini choose the alarm clock's track randomly? or, at least, is it possible to choose a different song to start my morning off with?
thanks!

The iPod wakes up to a song from a playlist. It chooses the first song in the list.
Although I've never tried it, it may choose something other than the first song in the list if you set the songs to "shuffle".
Failing that, you would have to create a different playlist with a different song and select that to wake up to.

Can i get some help with the bing app please?

ironically i searched all over the bing website and couldn't find the answer to this:
on the bing commercial they show the ability to hold up your phone with the app open and on the screen you see the scene in front of you but with little popups telling you what each place is. i cannot figure out how to get the app to do that, can anyone provide instructions? thanks.

Bing Mobile email support is here:
https://support.discoverbing.com/default.aspx?%7b!%7dsource=app_iPhone&ct=eformt s&mkt=en-US&productkey=bingmobile&scrx=1&st=1&wfxredirect=1

Help with "The iTunes Library file cannot be saved. An unknown error occurred (-54)"

Hi,
Has anyone else had this problem? And how do I correct it? "The iTunes Library file cannot be saved. An unknown error occurred (-54)"

adamwineguy wrote:
I was having this issue as well, after doing two things: updating iTunes yesterday, and installing and running ClamXav, a Mac antivirus tool.
I have now fixed the issue, first I made sure that I had the proper permissions for iTunes and it's library folders. Then I completely removed ClamXav and all its related files and restarted iTunes. Now I no longer get this error when adding new media to iTunes or updating apps, and the library file saves fine. For some reason I think it was related to the antivirus software.
I think it was a coincidence as ClamXav only modifies permissions on the files it installs and none of those are anywhere near your iTunes folders, but I'm glad you got it working.

Need some help with the autosave feature - Please!

Hello,
I started an animation in flash recently and the autosave feature was turned on. I had a good animation, but decided to play around with it a bit. After a little while, I decided to call it a night and exited the program making sure NOT to save my work. Upon opening that file the next time, I come to find out that Flash has autosaved my file while I was playing around. Now I have a worthless animation, and have to start from scratch. Is there any way to revert to a previous save, or autosave at this point, or am I about to do a lot of work again?
Thanks anyone who can help.

As far as I know, the autosave function isn't able to track down previous versions of the saved document - that calls for a specified version control system. I believe that Flash only saves the file if it is told to. There is a few ways to enable or disable autosave:
in the "New Document" dialog. you can choose to enable Auto-Save.
In the "Document properties" dialog you can set the checkmark.
If these are checked of, there isn't going to happen any auto saving. The problem may be, that there is also a topic called Auto-Recovery. Recovery and Save isn't the same when it comes to Flash, but people tend to think of them as the same. You set the Auto-Recovery feature in the Preferences under General.
Windows: Edit>Preferences : General>Auto-Recovery
Mac OS: Flash Professional>Preferences : General>Auto-Recovery
Both has a default of 10 minutes, and can therefore confuse he user. Please look at the document to make sure, that you haven't unset Auto-Recovery instead of Auto-Save. you can do that by:
Go to the preferences (Ctrl+U on Windows and Command+U on Mac OS) and check to see if Auto-Recovery is set.
Go to the documents properties (Ctrl+J on Windows and Command+J on Mac OS) and check to see if Auto-Save is set.
The first one (in the preferences) is ok to have set. It is the second one, that may have caused trouble for you.
/ockley

Help with the java system, please !!

Each time i execute the following statement,
create or replace java system;
I get the following errors:
VM: Killing process oracle
end-of-file on communication channel
Can anyone help me with this problem, please?

My platform is Linux - Red Hat 6.2 -.
I did the changes in the sizes of the java_pool and shared_pool and I got the same problem.
But, I've just fixed the problem b increasing the size of the swap partition. I changed it from 100 MB to 1000 MB. Then, I got everything very clean.
Thanks a lot for your help and your consideration.

Help with the itunes Programme PLEASE!

Similar Messages

Maybe you are looking for