What APN and settings do I use the iPad 2 T Mobile 3G connectivity
hello got my nano SIM from my iPad 2 from T Mobile and I like to know what are the APN settings I should use I can get 3G connectivity.
Once you insert a T-Mobile sim, the APN settings will then show up.
Enter
epc.tmobile.com
That is all you need.
Similar Messages
-
I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?
Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go. -
my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
I have purchased StoreIt (and also SQLite Console) for my iPod but it is not clear to me how to import a CSV file into a StoreIt "category", after reading and rereading the documentation at http://www.database4iphone.com/faq/import-text-file-into-storeit/. Can anyone explain this, please?
I figured it out: According to the message I got when pressing the circular arrow icon, I should use the URL http://192.168.1.6:54726 in the browser and import (or use other functions) while the screen is displayed on the iPod.
-
What is the best and easiest print app for the iPad and iPhone?
What is the best and easiest print app for the iPad?
Richard-
The best and easiest is to use the iPad's built-in AirPrint system with an AirPrint-capable printer. <iOS: AirPrint 101>
If you do not have an AirPrint-capable printer, all printing Apps are a compromise. I have an HP non-AirPrint printer connected to my WiFi router. The free HP App, ePrint Home & Biz works OK with photos.
Print n Share and PrintCentral each have their own browser, mail, text and photo programs that work well with the printer, but they can only be accessed from within other programs that have the "Open In" option. (So far, I think GoodReader is the only App I have with that option.)
You can run a program like Printopia or FingerPrint on your computer that will share its printer as AirPrint over WiFi. They both are reported to work well. However your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred -
I had a problem with my iPod, so because of that apple gave me a new one. So i want to get all my infomation back using the bachup of icloud, but when i put in the iPod use a backup of icloud it said that there is no backup and in iTunes didn´t apear. What can i do ?
That's the problem. You can't restore a device to a backup made on a device that was running a higher iOS version than the device being restored. You'll first have to update the replacement to iOS 6, then go to Settings>General>Reset and tap Erase All Content and Settings, go back through the setup screens again and when given the option select Restore From iCloud Backup. Your backup should now be available to restore to.
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
Hello. How can I reset my iCloud because i forgot the password to my iCloud and I'm not using the email address i used in that account. What should I do?
Try this: https://iforgot.apple.com/password/verify/appleid
Hopefully you have already set up your security questions. -
I downloaded the new os7 on my ipad mini. Now in order to use the Ipad, I need to enter a passcode. I cannot get pass this screen. I did
not set it up to use a passcode. What can I do? I am not too computer savy.I have the same problem. I upgraded to iOS7, entered my usual passcode when prompted in setup, and when I tried to access my iPad after installation was finished it denied my passcode. I can't connect to any internet to erase it or anything because the new iOS hasn't yet been configured to a wifi network, so I can't backup from anything either.
When I connect the iPad to iTunes, it tells me that Find My iPad must be disabled on my iPad before backup or restore can continue - and I can't access anything beyond the lock screen of my iPad at all because it refuses to accept my passcode, so I can't get to Find My iPad. -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this?
Go to the game's option settings and change the settings to something more to your liking.
-
i just updated my iphone to iOS 5.1.1, and shortly after it finished installing and i try to use my itunes it says it cannot connect to the store? what shall i do?
There are a number of threads from other people reporting the same iTunes connection issue - it looks like there might be a problem at Apple's end
-
I downloaded/installed a software that came up on the IPad screen and left itrunning until the next morning. When I went to used the IPad next day, I have not been able to restart it. What should I do?
thanks,
hariIf you mean that it won't boot up, then assuming that the battery isn't empty (it can take about 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
i have lost my iphone4 and i guess the theft have already clear up the data include my mails and so on. what can i do? i use the iphone only 2months and i dont have any icloud or mobileme acc. how apple can help me?
Apple can't/won't help you:
Reporting a lost or stolen Apple product - http://support.apple.com/kb/ht2526 - "... Apple does not have a process to track or flag lost or stolen product..."
Texas Mac Man links on lost/stolen i-devices - https://discussions.apple.com/message/18781718
Contact the police about the theft. Change passwords on any accounts used with the device. Contact the carrier about discontinuing service and possibly blocking future contracts with the phone. Shop for a new phone. -
I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?
I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?
Maybe you are looking for
-
How to move list of folders in Outlook Web App from Safari to Firefox
I have a list of folders, one or two moved over but moist did nit
-
No sound on Satellite Pro A120 with Windows Vista
Hi I have had to reinstall my Vista operating system and rebuild my A120 Satellite Pro from the revovery disk. Most things are fine but I cant get any sound from the speakers of headphine jack. I have checked andit says that the Realtek High Definiti
-
Drivers for HP LaserJet Pro 200 color MFP M276nw and MAC
My pc has recently been updated with Maverics 10.9, I've installed the drivers from this website and the CD, but eveytime I print the pages come out blank. Please help asap.
-
JMS adapter not picking the file
Hello, I am working jms to jms scenario on PI7.0 Service Pack13. file is not able to pick up sendar JMS Channel. I am using WebSphereMQ Transport Protocol. JMS drivers are installed. I checked all parameters of JMS Adapter. no mistake in parameters.
-
Where is the .m2v menu file located for saved projects?
Hi, i've done this before, but seem to have forgotten...I was wondering where is the location of the .m2v files of a saved project. The reason why i would like to find the .m2v file, is so i could convert the .m2v to .dv in order to create a menu on