Help with .txt files importing / showing

I am working cs4. / as 3.0
I need some help understanding placing text with .txt files.
I have a txt & css file in my site folder.
Do I need to add a line to my script to locate the files in
my site folder?
Any help would be appreciated. thanks
Here is what I have so far.
var fileTxt:String;
var myTextLoader:URLLoader = new URLLoader();
var cssLoader:URLLoader = new URLLoader();
myTextLoader.addEventListener(Event.COMPLETE, onloaded);
myTextLoader.load(new URLRequest("textInfo.txt"));
function onLoaded(e:Event):void {
fileTxt=myTextLoader.data;
callCss();
function callCss():void {
var cssRequest:URLRequest=new URLRequest("stylesSite.css");
cssLoader.addEventListener(Event.COMPLETE, onCss);
cssLoader.load(cssRequest);
function onCss(e:Event):void {
var css:StyleSheet = new StyleSheet();
css.parseCSS(cssLoader.data);
infoText.styleSheet=css;
infoText.wordWrap=true;
infoText.htmlText=fileTxt;
infoScroll.update();

Thanks for the information. Am I missing something or you forgot to actually post a question?
What are the problems you have? What have you tried and how did not it work?
Mike

Similar Messages

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • Shell Script to send email with .txt file as attachment

    Dear Al,
    Could any one help me with code, for sending email with .txt file as attachment using shell script.
    Thank You!

    978334 wrote:
    Dear Al,
    Could any one help me with code, for sending email with .txt file as attachment using shell script.
    Thank You!http://bit.ly/XHfSCz
    https://forums.oracle.com/forums/search.jspa?threadID=&q=sendmail&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Help with maze program/importing  txt

    Hi everybody
    im having a very hard time figuring out how to program a problem given to me. Im fairly new to java (im more of a c++ kinda guy but we must do this in java.. unfortunately) and the problem states this
    Problem Description
    you will write an application that searches a maze in order to help a trapped mouse find the hidden cheese. The maze can be represented using 4 symbols as follows: 1 represents a wall 0 represents space m represents the initial mouse position c represents the cheese position
    The following is an example input maze:
    111111111111
    101000001001
    1c0000100001
    101111111111
    100111100001
    110111111001
    110000000m11
    111110111101
    111111111111
    Your application must search the maze, starting at the m position, and stops when it reaches the c position. Note that not all mazes have solutions. So, it must also stop if the maze has no solution.
    For simplicity, you may assume the following: the maze is surrounded by 1?s the cheese (c position) can be found anywhere in the maze, except at the border (surrounding 1?s)
    Programming
    Write an application that inputs the maze from the user (Do NOT hardcode the maze in your program), and searches for the c position, starting from the m position.
    Your application must print the updated maze, every time a new position is tried, until a solution is found, or the application discovers that a solution cannot be found.
    Now so far hopefully my logic is correct. We are allowed to input a txt file with any given maze inside the txt file. However, the maze must be a maximum of 100 x 100 but can be any size under that.
    Now first things first.. importing a txt
    heres what i have so far
    public static void main (String [] args){
    Scanner mazefile;
    try {
    Scanner mazefile = new Scanner (new File("maze.txt")); //maze.txt being the txt file with the maze inside it
    catch (FileNotFoundException e){
    System.out.println("Could not Open file");
    return;
    while (mazefile.hasNext());
    String x = inf.nextLine();
    System.out.print(x);
    mazefile.close();
    personally i think this is totally wrong...i cant seem to figure out where to put the bounded so that the maze is a max of 100 by 100 and what happens if the txt is like
    1111111111111
    111c111111111
    1110111111111
    111000m11111
    will the scanner import it into java so its like this?!

    Just use a 2D array of ints, no stack needed.
    int maze[][];
    int maze1[][]=new int[100][100];
    try{
    BufferedReader reader=new BufferedReader(new InputStreamReader(new FileInputStream("maze.txt")));
    String str="";
    int count=0,width=0;
    while((str=reader.readLine())!=null){
        if(str.length()>100)error();
        if(str.length()>width)width=str.length();
        for(int i=0;i<str.length();i++)maze1[count]=Integer.paseInt(""+str.charAt(i));
    count++;
    if(count>=100)error();
    maze=new int[count][max];
    for(int i=0;i<count;i++)for(int j=0;j<max;j++)maze[i][j]=maze1[i][j];
    } catch(Exception ex){}

  • Help with referenced files and importing

    This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
    Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
    Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
    I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
    Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
    Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
    Would any or all of these issues be resolved by moving to a managed file set up?
    Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
    Any insights would be appreciated. Thanks.

    It is not as complex as you are making it.  Aperture is not per se an editor.  It is for storing and organizing, and quickly decoding RAW images.  It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
    You don't want to have your images referenced so you can also edit them with other programs.  That destroys the non destructive design of Aperture.  If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
    You need to read further as to how and why Aperture works the way it does.
    Ernie

  • Archive applet. Help with adding files to archive, then show.

    I need help with this applet: http://pastebin.com/589064
    The user is supposed to add, remove and open archives with text in it.
    My problem is now the highlited area in the code (the lines with the @@'s).
    This button should list all files i have added to the archive, however when i press the button, i only get a numberlisting. eg, if i have added 4 files to the archive I get: 0123
    However I want the Joptionpane to show a listing of the files in the archive.
    When I press "open" i can choose a file, press add, then open a new file, press add, and then when i click show archive, the filenames of the two files i added, should list through a Joptionpane..as you can see, i've tried, but i'm very unfamiliar with this.

    OK..i've done it
    check out http://pastebin.com/589268
    however, now i'd like to change the code, so that if i try to add to files with the same filename, the applet should show an error message..
    How do i do that, please? :-)

  • Help please with P2 files importation

    Hi -
    For the first time ever I am going to be working with P2 files from and Panasonic 200 camera. I have done Google searching but much of the info seems dated - can you please direct me to what I need to what is the most current download to make the importation into FCP 7 possible?
    If you can guide me to a current tutorial, that would be much appreciated also.
    Thanks you very much,
    MtD

    Shane wrote one for FCP 6:
    http://library.creativecow.net/articles/ross_shane/p2fcp6.php
    It shouldn't make a difference with FCP 7.
    Remember:
    1. Don't need a driver for mounting the cam in SL;
    2. Always write protect the p2 cards before mounting if you are using the camera.
    3. If you shot pN format (ask), look at the preferences in the L/T window on removing pulldown upon import.

  • Help with image file names when using Import Word document feature

    Hello,
    I am using File >> Import >> Word document into an HTML template.  If the Word document contains images, the images are written to the directory specified in my Site Default Image Folder.  Here is my question: As I was teaching myself the Import function, one time the images were automatically named to match the page name.  So for example, if my page is named Create.html, the images would be named Create_image001.jpg, Create_image002.jpg, etc.  I can't remember how I enabled this feature (or maybe I was dreaming) but if anyone knows how to control the name of the images imported from MS Word, please let me know.  I've searched and Googled for hours and can't find a way to control the image file names.
    Thanks in advance,
    Shellie

    I was hoping that this would be fixed in the 10.8.2 upgrade but it has not.  Anyone have any luck?  Earlier today I was trying to write a paper and navigating between 10 pdfs was a nightmare without being able to hover my mouse for the titles like I used to. 

  • Email attachment with .txt file (first line blank in the file)

    Hi all ,
    Iam trying attach .txt file to email , the file that iam accessing from server  . But first line blank (extra) even though i dont have blank line in original file .Can any help me out to resolve this issue?
    <u>Example</u> original file
    12345     aa    pq
    <u>Email attachment file</u>
                                        -> This line
    12345     aa    pq
    This is my code:
    REPORT  ZTEST_FILE  .
    DATA:BEGIN OF t_upload occurs 0,
           matnr LIKE zwplcsmev-matnr,
           zwgehrrg LIKE zwplcsmev-zwgehrrg,
           zwgehrct LIKE zwplcsmev-zwgehrct,
           zwgbev LIKE   zwplcsmev-zwgbev,
           zwpldt LIKE zwplcsmev-zwpldt,
           zwacdt LIKE zwplcsmev-zwacdt,
         END OF t_upload.
    *DATA:  maildata type sodocchgi1.
    *DATA:  mailtxt type table of solisti1 with header line.
    *DATA:  mailrec type table of somlrec90 with header line.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:REC(80) TYPE C.
    DATA g_mask(20) TYPE c VALUE ',., ..'.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:P_ERROR(3).
    DATA:P_REFO(3).
    DATA:   gd_error TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1.
    selection-screen begin of block b1 with frame title text-001.
    parameters:p_file type localfile.
    parameter:p_email type ad_smtpadr.
    selection-screen end of block b1.
    --At Selection-Screen- -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'TB_LIMIT_WS_FILENAME_GET'
          EXPORTING
            def_filename     = p_file
            mask             = g_mask
         mode             = 'S'
            title            = 'INPUT FILE'
          IMPORTING
            filename         = p_file
          EXCEPTIONS
            selection_cancel = 1
            selection_error  = 2
            OTHERS           = 3.
      IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    START-OF-SELECTION.
      PERFORM process_file.
      if p_error = 'X' AND P_REFO <> 'X'.
      PERFORM populate_message_body.
      ENDIF.
      IF P_REFO = 'X' AND P_ERROR <> 'X'.
      it_message = 'Please find Attached file'.
      APPEND it_message.
      PERFORM send_attachment tables it_message
                                 it_attach
                          using  p_email
                         'Crest to Plc Data'
                                          'TXT'
                                          p_file
                                 changing gd_error
                                          gd_reciever.
      ENDIF.
      Instructs mail send program for SAPCONNECT to send email(rsconn01)
    PERFORM initiate_mail_execute_program.
    END-OF-SELECTION.
    *&      Form  process_file
          text
    FORM process_file.
    *CONSTANTS: con_cret TYPE x VALUE '0D',  "OK for non Unicode
                con_tab TYPE x VALUE '09'.   "OK for non Unicode
      DATA :l_path TYPE  string.
      l_path = p_file.
    CONSTANTS:  con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB
      con_cret type c value cl_abap_char_utilities=>newline.
    OPEN DATASET P_FILE  FOR INPUT IN TEXT MODE encoding default.
    if sy-subrc = 0.
    do.
    read dataset p_file into IT_ATTACH.
    IF SY-SUBRC  NE 0 .
    EXIT.
    ELSE.
    T_UPLOAD = IT_ATTACH.
    CONCATENATE con_cret it_attach  INTO it_attach .
    append it_attach.
    clear it_attach.
    P_REFO = 'X'.
    APPEND T_UPLOAD .
    clear t_upload.
    ENDIF.
    ENDDO.
    else.
    p_error = 'X'.
    ENDIF.
    ENDFORM.                    "process_file
    *&      Form  populate_message_body
          text
    FORM populate_message_body.
    w_doc_data-obj_name = 'TEST'.
      w_doc_data-obj_descr = 'Crest to Plc Data'.
      w_doc_data-obj_langu = sy-langu.
      it_message = 'File Not Found'.
      APPEND it_message.
    t_receivers-receiver = p_email.
      t_receivers-rec_type = 'U'.
      append t_receivers.
      call function 'SO_NEW_DOCUMENT_SEND_API1'
           exporting
                document_data              = w_doc_data
                document_type              = 'RAW'
                put_in_outbox              = 'X'
           tables
                object_header              = it_message
                object_content             = it_message
                receivers                  = t_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
        if sy-subrc = 0.
      commit work.
        SUBMIT rsconn01 USING SELECTION-SET 'SAP&CONNECTINT' AND RETURN.
      else.
        MESSAGE s027(vv) WITH 'E-mail not sent'.
      endif.
    ENDFORM.                    "populate_message_body
    *&      Form  send_attachment
          text
    FORM send_attachment tables pit_message
                                pit_attach
                         using  p_email
                                p_mtitle
                                p_format
                                p_filename
                                p_attdescription
                                p_sender_address
                                p_sender_addres_type
                       changing p_error
                                p_reciever.
      DATA:   ld_error    TYPE sy-subrc,
              ld_reciever TYPE sy-subrc,
              ld_mtitle LIKE sodocchgi1-obj_descr,
              ld_email LIKE  somlreci1-receiver,
              ld_format TYPE  so_obj_tp ,
              ld_attdescription TYPE  so_obj_nam ,
              ld_attfilename TYPE  so_obj_des ,
              ld_sender_address LIKE  soextreci1-receiver,
              ld_sender_address_type LIKE  soextreci1-adr_typ,
              ld_receiver LIKE  sy-subrc.
      ld_email  = p_email.
      ld_mtitle = p_mtitle.
      ld_format = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
      w_doc_data-doc_size = 1.
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
      clear t_attachment.
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = w_doc_data
          put_in_outbox              = 'X'
          sender_address             = ld_sender_address
          sender_address_type        = ld_sender_address_type
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = w_sent_all
        TABLES
          packing_list               = t_packing_list
          contents_bin               = t_attachment
          contents_txt               = it_message
          receivers                  = t_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
      if sy-subrc = 0.
        commit work.
        SUBMIT rsconn01 USING SELECTION-SET 'SAP&CONNECTINT' AND RETURN.
      else.
        MESSAGE s027(vv) WITH 'E-mail not sent'.
      endif.
    Populate error return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.                    "send_attachment

    Just copy the code below and execute . I just checked and found the exact values on attachment with no blank lines. This is more simple than the one u have written , just include ur data upload logic . For ITAB values to be attached i have written a simple logic to retrive from EKPO. Just copy this code and execute. u will understand then.
    I understand that ur initial requirement was to attach the file directly and not to upload and attach. If u still want to go for the old requirement then check out the code(2nd program of the two that i have sent) that i have sent u on ur previous post.
    REPORT  ZEMAIL_ATTACH                   .
    TABLES: ekko.
    PARAMETERS: p_email   TYPE somlreci1-receiver
                                      DEFAULT '[email protected]'.
    TYPES: BEGIN OF t_ekpo,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
          wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
      ebeln(10) TYPE c,
      ebelp(5)  TYPE c,
      aedat(8)  TYPE c,
      matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1,
            gd_error    TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
      Retrieve sample data from table ekpo
      PERFORM data_retrieval.
      Populate table with detaisl to be entered into .xls file
      PERFORM build_TXT_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    Populate message body text
      perform populate_email_message_body.
    Send file by email as .TXT speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_message
                                          it_attach
                                    using p_email
                                          'Example .TXT documnet attachment'
                                          'TXT'
                                          'filename'
                                 changing gd_error
                                          gd_reciever.
      Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM initiate_mail_execute_program.
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp aedat matnr
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekpo.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  BUILD_TXT_DATA_TABLE
          Build data table for .txt document
    FORM build_txt_data_table.
      CONSTANTS: con_cret TYPE x VALUE '0D',  "OK for non Unicode
                 con_tab TYPE x VALUE '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
       con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
       con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
             INTO it_attach  SEPARATED BY SPACE . "con_tab.
    CONCATENATE con_cret it_attach  INTO it_attach." Use this if req.
      APPEND  it_attach.
      LOOP AT it_ekpo INTO wa_charekpo.
        CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                    wa_charekpo-aedat wa_charekpo-matnr
               INTO it_attach SEPARATED BY SPACE ."con_tab.
       CONCATENATE con_cret it_attach  INTO it_attach." Use this if req.
        APPEND  it_attach.
      ENDLOOP.
    ENDFORM.                    " BUILD_txt_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *&      Form  POPULATE_EMAIL_MESSAGE_BODY
           Populate message body text
    form populate_email_message_body.
      REFRESH it_message.
      it_message = 'Please find attached a list test ekpo records'.
      APPEND it_message.
    endform.                    " POPULATE_EMAIL_MESSAGE_BODY
    execute this code and i hope that will help u.
    regards,
    Barath.

  • Send email with txt file as attachment

    Hi ,
    can any one help me in download as txt file using the function module SO_OBJECT_SEND along with email .
    a sample code using this function module would be helpfull.
    Thanks,
    vinay .

    Hi vinay,
    Not only TXT file, u can send any
    other file like word,excel,pdf,exe, etc.
    1. There is some trick involved
    in the binary files.
    2. I have made a program (and it works fantastic)
    ONLY 6 LINES FOR EMAILING
    BELIEVE ME
    ITS A FANTASTIC PROGRAM.
    IT WILL WORK LIKE OUTLOOK EXPRESS !
    3. The user is provided with
    a) file name
    b) email address to send mail
    and it sends ANY FILE (.xls,.pdf .xyz..)
    Instantaneously !
    4. Make two things first :
    1. Include with the name : ZAMI_INCLFOR_MAIL
    2. Report with the name : ZAM_TEMP147 (any name will do)
    3. Activate both and execute (2)
    4. After providing filename, email adress
    5. Code for Include :
    10.08.2005 Amit M - Created
    Include For Mail (First Req F16)
    Modification Log
    Data
    DATA: docdata LIKE sodocchgi1,
    objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
    objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
    objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objhex LIKE solix OCCURS 10 WITH HEADER LINE,
    reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
    DATA: tab_lines TYPE i,
    doc_size TYPE i,
    att_type LIKE soodk-objtp.
    DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
    FORM
    FORM ml_customize USING objname objdesc.
    Clear Variables
    CLEAR docdata.
    REFRESH objpack.
    CLEAR objpack.
    REFRESH objhead.
    REFRESH objtxt.
    CLEAR objtxt.
    REFRESH objbin.
    CLEAR objbin.
    REFRESH objhex.
    CLEAR objhex.
    REFRESH reclist.
    CLEAR reclist.
    REFRESH listobject.
    CLEAR listobject.
    CLEAR tab_lines.
    CLEAR doc_size.
    CLEAR att_type.
    Set Variables
    docdata-obj_name = objname.
    docdata-obj_descr = objdesc.
    ENDFORM. "ml_customize
    FORM
    FORM ml_addrecp USING preceiver prec_type.
    CLEAR reclist.
    reclist-receiver = preceiver.
    reclist-rec_type = prec_type.
    APPEND reclist.
    ENDFORM. "ml_customize
    FORM
    FORM ml_addtxt USING ptxt.
    CLEAR objtxt.
    objtxt = ptxt.
    APPEND objtxt.
    ENDFORM. "ml_customize
    FORM
    FORM ml_prepare USING bypassmemory whatatt_type whatname.
    IF bypassmemory = ''.
    Fetch List From Memory
    CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
    listobject = listobject
    EXCEPTIONS
    OTHERS = 1.
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'LIST_FROM_MEMORY'.
    ENDIF.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    COMPRESSED_SIZE =
    TABLES
    in = listobject
    out = objbin
    EXCEPTIONS
    OTHERS = 1
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'TABLE_COMPRESS'.
    ENDIF.
    ENDIF.
    Header Data
    Already Done Thru FM
    Main Text
    Already Done Thru FM
    Packing Info For Text Data
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
    APPEND objpack.
    Packing Info Attachment
    att_type = whatatt_type..
    DESCRIBE TABLE objbin LINES tab_lines.
    READ TABLE objbin INDEX tab_lines.
    objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = att_type.
    objpack-obj_name = 'ATTACHMENT'.
    objpack-obj_descr = whatname.
    APPEND objpack.
    Receiver List
    Already done thru fm
    ENDFORM. "ml_prepare
    FORM
    FORM ml_dosend.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = docdata
    put_in_outbox = 'X'
    commit_work = 'X' "used from rel. 6.10
    IMPORTING
    SENT_TO_ALL =
    NEW_OBJECT_ID =
    TABLES
    packing_list = objpack
    object_header = objhead
    contents_bin = objbin
    contents_txt = objtxt
    CONTENTS_HEX = objhex
    OBJECT_PARA =
    object_parb =
    receivers = reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8
    IF sy-subrc <> 0.
    MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
    WITH docdata-obj_name.
    ENDIF.
    ENDFORM. "ml_customize
    FORM
    FORM ml_spooltopdf USING whatspoolid.
    DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
    Call Function
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
    src_spoolid = whatspoolid
    TABLES
    pdf = pdf
    EXCEPTIONS
    err_no_otf_spooljob = 1
    OTHERS = 12.
    Convert
    PERFORM doconv TABLES pdf objbin.
    ENDFORM. "ml_spooltopdf
    FORM
    FORM doconv TABLES
    mypdf STRUCTURE tline
    outbin STRUCTURE solisti1.
    Data
    DATA : pos TYPE i.
    DATA : len TYPE i.
    Loop And Put Data
    LOOP AT mypdf.
    pos = 255 - len.
    IF pos > 134. "length of pdf_table
    pos = 134.
    ENDIF.
    outbin+len = mypdf(pos).
    len = len + pos.
    IF len = 255. "length of out (contents_bin)
    APPEND outbin.
    CLEAR: outbin, len.
    IF pos < 134.
    outbin = mypdf+pos.
    len = 134 - pos.
    ENDIF.
    ENDIF.
    ENDLOOP.
    IF len > 0.
    APPEND outbin.
    ENDIF.
    ENDFORM. "doconv
    CODE FOR PROGRAM
    5.
    REPORT zam_temp147 .
    INCLUDE zami_inclfor_mail.
    DATA
    DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
    DATA : file_name TYPE string.
    data : path like PCFILE-PATH.
    data : extension(5) type c.
    data : name(100) type c.
    SELECTION SCREEN
    PARAMETERS : receiver TYPE somlreci1-receiver lower case.
    PARAMETERS : p_file LIKE rlgrap-filename
    OBLIGATORY.
    AT SELECTION SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CLEAR p_file.
    CALL FUNCTION 'F4_FILENAME'
    IMPORTING
    file_name = p_file.
    START-OF-SELECTION
    START-OF-SELECTION.
    PERFORM ml_customize USING 'Tst' 'Testing'.
    PERFORM ml_addrecp USING receiver 'U'.
    PERFORM upl.
    PERFORM doconv TABLES itab objbin.
    PERFORM ml_prepare USING 'X' extension name.
    PERFORM ml_dosend.
    SUBMIT rsconn01
    WITH mode EQ 'INT'
    AND RETURN.
    FORM
    FORM upl.
    file_name = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = file_name
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    path = file_name.
    CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
    EXPORTING
    complete_filename = path
    CHECK_DOS_FORMAT =
    IMPORTING
    DRIVE =
    EXTENSION = extension
    NAME = name
    NAME_WITH_EXT =
    PATH =
    EXCEPTIONS
    INVALID_DRIVE = 1
    INVALID_EXTENSION = 2
    INVALID_NAME = 3
    INVALID_PATH = 4
    OTHERS = 5
    ENDFORM. "upl
    regards,
    amit m.

  • Help with the File Reader code

    Hi ALL!
    I'm novice to Java, so, I would appreciate any help and please take into account that I just start learning Java. Thanks in advance!
    So, I wrote Java program to read data from file and output it to the console.
    Here's the code:
    package files;
    import java.io.*;
    public class FlatReader{
         public String getText(File file, String encode) throws IOException {     
              BufferedReader inputStream = null ;
              String str="";
              try {
                   inputStream = new BufferedReader(new InputStreamReader(new FileInputStream(file), encode));
                   do {
                        str+=inputStream.readLine();
                   while (inputStream.readLine()!=null);
                   PrintStream sysout = new PrintStream(System.out, true, "UTF-8");
                   sysout.println(str);                         
                   return str;
              } finally {
                if (inputStream != null) {
                    inputStream.close();
         public static void main (String args[])
              File file = new File("d:\\temp.txt");
              FlatReader flat = new FlatReader();
              try {
              flat.getText(file, "UTF-8");
               catch(IOException err)
    }Everything works fine but if you have a file with three lines for example:
    Line1
    Line2
    Line3
    then my program will return only Line1 and Line2
    I know that I can use something like
    while (str=inputStream.readLine()!=null);
    instead of do while...but that does not work for me because the whole idea is that I should get the correct value in my str variable when I return it in the method, i.e. return str and str should have
    Line1
    Line2
    Line3
    Could you please help me to figure it out?
    Thanks!

    do {
    str+=inputStream.readLine(); // Here you're reading a line
    while (inputStream.readLine()!=null); // And here you're reading another one (and thus skipping it)

  • Need help with manifest file

    When I created a jar file with the -m option to insert a list of Name headers in my manifest file, only the last one in the list shows up in the manifest file when I unjar it. What am I doing wrong?

    i have used
    jar command it takes whatever specified in your own manifest information file into the meta-inf 's manifest file
    use jar -cvfm jarfile.jar maniinfofile.txt files.*
    hope it helps !!

  • The Path to nowhere - help! swf files not showing in browser

    i need help with getting a swf file to show in the browsers. (it previews in dreamweaver)
    created a website in dreamweaver cs4. created a simple slideshow in flash 4.
    on the index.html page inserted the flash file.
    it previews in dreamweaver BUT when i text in browsers it shows as a white box.
    have been reading through all the info about paths etc.
    can you simplify this entry below from adninjastrator on the adobe forums sept 19 2011???........
    "Still looks like a pathing problem to me. For review:
    Pathing issues
    Almost always when it works on the local machine and not the server, it's a pathing problem.
    You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
    Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location.  So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
    In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
    So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
    Best wishes,
    Eye for Video
    adninjastrator"
    here is my code...
    <div align="center">
            <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="350" height="200" id="FlashID" title="2812gtbroslides">
              <param name="movie" value="/2812gtbros.swf" />
              <param name="quality" value="high" />
              <param name="swfversion" value="6.0.65.0" />
              <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
              <param name="expressinstall" value="/Scripts/expressInstall.swf" />
              <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
              <!--[if !IE]>-->
              <object type="application/x-shockwave-flash" data="/2812gtbros.swf" width="350" height="200">
                <!--<![endif]-->
                <param name="quality" value="high" />
                <param name="swfversion" value="6.0.65.0" />
                <param name="expressinstall" value="/Scripts/expressInstall.swf" />
                <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
                <div>
                  <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                  <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
                </div>
                <!--[if !IE]>-->
              </object>
              <!--<![endif]-->
            </object>
            <br />
    thanx
    wwwww1325

    i am not sure why this sounds so foreign to me.....
    i understand the page code instructs the browser to find and load the flash file from a path.
    i do not understand "/2812gtbros.swf (i.e. start at the root of the site and look for that filename in that location)
    i have the html fla and swf file in the folder on my computer named 212GTflashpics (2012freelance/2012gtbrothers/212GTflashpics/2812gtbros.swf) and i have it in the website folder GTbrothers1 with all the images scrpts sprys and html files
    the files be in the website folder o
    in your previous Question...
    "This line -
    <param name="movie" value="/2812gtbros.swf" />
    is telling the browser to look for the flash file in the root of the website.  Is that where it is?"
    what is before the / in the value=" /2812gtbros.swf? wouldnt that tell us the path of the file?
    thanx

  • Help! Audible files not showing up on my ZEN!

    - >I hope this isn't a repeat question, but I've been through about 3 pages of this thread and haven't found it. I need help with .aa (Audible) files. They're on the MP3 (Zen), because I can see them with the Zen Media Explorer, but they don't show up anywhere on my Zen. Plus, it's difficult to load them in the first place. The Zen usually freezes up. I think that last part may be the fault of my p.o.c. computer, but I'm not sure. Please help! I own about 20 Audio books, and I WANT to listen to them! I tried contacting both Audible & Creative, and just got the run-around. I've been send a link to something from microsoft, but it's a dead link. Any help would be greatly appreciated. Thanks.

    I am going to make a couple assumptions:
    . you have Audible files from Audible.com (as opposed to generic audiobooks from something like NetLibrary)
    2. you have an account with Audible.com (you don't have to continue to pay to keep your account)
    3. you are familiar with Audible Manager software
    There is no problem at all using Audible Manager software for Audible content and other software to sync the rest of your stuff. I do this.
    If you sync your books with Audible Manager, you are going to have to make your new player an authorized player on that computer in Audible Manager. You have a limit to how many players you can have, and also how many per computer. You might have to "bump" an older player (the "Burn CD" option counts as a player)
    Your Audible content will sync after you sign in and "authorize" your new player. It will go into the "Music" section. You find it by looking for the author, title, OR (easiest in my opinion) the Audiobook genre. Let us know here how this worked out.

Maybe you are looking for

  • How to get all authorization objects for a certain authorization profile

    Hi ABAP experts, I have the following problem: for a certain authorization profile of a role (created with transaction PFCG) I would like to get all contained authorization objects: e.g. for the contained object PLOG I would like to know/read all cor

  • Email Test Error

    Hi there, We're using the workflow aplication on the ECM and we want to send a email at the end of the workflow, notifying an entity that the content has been rejected or approved but we don't know how to do this. We also have tried to test if the em

  • By the way, just tried to reboot like what other said to hold home button

    By the way, just tried to reboot like what other said, to hold home button & on/off button for 10 secs, no apple sign appears, screen stil stuck as it was ! ????

  • Test Package - Assignment to different tester

    hi to everybody, I'm using STWB_2 and STWB_WORK during test in an implementation project. I have created a test case with different process steps. Some of these steps are to be executed by a key user, other by another key user. How can I assign the d

  • Assets Equal Liabilities and Equity

    Hi Team, When I am trying to close a period in ECCS consolidation monitor, I am getting error "Assets Equal Liabilities and Equity". Actually we are archiving ECCS data in development environment. When archiving ECCS tables, we are getting error ECCS