Hex decimal n.o to integer conversion?

how to convert 1 byte hex n.o in decimal form to the decimal integer of of 8 bit data .
Solved!
Go to Solution.

Hi,
You can use the Hexadecimal to Number fucntion. This is available in - Programming>String>String/Number Conversion.
Alternatively you can search for hexadecimal to number conversion.
Regards,
Kanchan Bhakoo
Applications Engineer | National Instruments

Similar Messages

Very Urgent - Converting Character value to Hexa Decimal value

Hi
data: lv_stsor_hex(16) type X.
p_is_ppc_comp_conf-stsor is a char 10 field ***
<b>write p_is_ppc_comp_conf-stsor to lv_stsor_hex.</b> "<-- Hex Conversion
In 4.6C version this write statement is working fine but this is obsolete in ECC 6.0
and its showing syntax error.
Can anyone tell me how to convert a 10 char length value to a hexa decimal value
which is of 16 characters length and of type hexadecimal
Thanks a lot. Points will be rewarded immediately.

Hi,
Use the Function module CHAR_HEX_CONVERSION.
report zeta_hex.
data: s type string.
data: h(1) type x.
data: c(1) type c.
data: byte(2) type c.
data: length type i.
FIELD-SYMBOLS: <DUMMY>.
s = 'ThisIsAString'.
length = strlen( s ).
do length times.
byte = ( sy-index - 1 ).
c = s+byte(1).
* You can do this
ASSIGN h TO <DUMMY> TYPE 'X'.
WRITE c TO <DUMMY>.
* or you can do this
* call function 'CHAR_HEX_CONVERSION'
*       exporting
*            input     = c
*       importing
*            hexstring = h.
write:/ h.
enddo.
Regards
Sudheer

Character to Hexa decimal

Hi ,
Is there any CLASS->METHOD which converts character values to Hexa decimal values?
I am getting a syntax error in ECC 6.0.
Please provide some example.
Thanks
Title was edited by:
Alvaro Tejada Galindo

Hi,
(p_is_ppc_comp_conf-stsor is 10 char field.)
data: lv_stsor_hex(16) type X.
write p_is_ppc_comp_conf-stsor to lv_stsor_hex. "<-- Hex Conversion
In 4.6C the write statement is working and the 10 char value is getting converted to a 16 length hexa field.
But in Upgrade its showing error in EPC saying that cannot write 10 char value into a hexa field.

ASCII Repsentation of hexa decimal to jpeg format

Hi
my requirement is to convert a file which contains hexa decimal code , i want to convert into a jpeg file
can anyone suggest me how i can approach this

Convert the data to RAW format and then output the RAW (probably via a BLOB datatype) to a file...
SQL> ed
Wrote file afiedt.buf
1 WITH t AS (select '424DB6050000000000003E00000028000000C3000000' as hx from dual)
2 -- END OF TEST DATA
3 SELECT hextoraw(hx), dump(hextoraw(hx))
4* from t
5 /
HEXTORAW(HX) DUMP(HEXTORAW(HX))
424DB6050000000000003E00000028000000C3000000 Typ=23 Len=22: 66,77,182,5,0,0,0,0,0,0,62,0,0,0,40,0,0,0,195,0,0,0
SQL>Note: HexToRaw has a limit on the input size (4000 character I think) so you'll have to do it in chunks.

Funtion modules to convert hexa decimal to integer

Hi,
Every one
can any one suggest me the function modules that can be used to convert the hexadecimal to integer.

Hi,
    Define a variable of type integer, and move the value of the hexadecimal variable into the declared variable.
Example.
DATA : var1 TYPE i,
       var2 TYPE x LENGTH 4 VALUE '00002710'.   " Hexadecimal value equal to 10000 integer
* directly move the value in hexadecimal type variable into integer type variable
MOVE var2 TO var1.
WRITE :/ var1.
Var1 = 10000   " Integer.
Regards
Bala Krishna

File content conversion : hexa decimal character value for tab

Experts,
I am working on a FCC for a tab delimited file. Can any one tell me what is the hexadecimal value of tab. I am using '0x09' but it is not recognizing this.
Can anyone help me out..
Thanks
Veeru

Hi Veeru,
> I am working on a FCC for a tab delimited file. Can any one tell me what is the hexadecimal value of tab. I am using '0x09' but it is not recognizing this.
Have a look at this bolg /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter . You can try the 2nd method given in that. If that doesn't solve your issue, might be there is some other problem in the FCC configuration.
Regards,
Sunil Chandra

The hexa decimal to decimal is not working propoerly

I'am attaching one VI where , read string after the VISA serial which is put to the hexadecimal conversion . This should give the converted decimal number at the number label. But it's not providing that. So can you send me a solution for this.
Solved!
Go to Solution.
Attachments:
conversion-2.vi ‏28 KB

Sorry, LabVIEW 7 is ancient. You are already typecasting a number to a string elsewhere, so you simply need to do the reverse: typecast the string to a U8 constant.
Create a U8 diagram constant bu placing a numeric diagram constant and setting the representation to U8 (right-click...representation). Wire that as type as follows: (read string is set to hex display, but that is just cosmetic)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
castString.png ‏5 KB

I have doubt regarding the byte to integer conversion.

In java card epurse application the output we see is in bytes.to convert this byte to integer which is understandable by the end-user what should be done?

809295 wrote:
In java card epurse application the output we see is in bytes .
to convert this byte to integer which is understandable by the end-user what should be done?What do you mean by we ?
How many bytes ?
On a java card platform support for integer is optional, you may only have short.
I assume by understandable by the end-user you mean display as a sequence of decimal digits ?
So two bytes 0x04 0xd2 (combined to a short 0x04d2 which is 1234 decimal)
should be presented to the user as 0x31 0x32 0x33 0x34 (ascii values for '1' '2' '3' '4').

Decimal in Unit of Measure conversion

Hi Gurus,
I want to enter decimals in Unit of Measure conversion. System is giving the error that "Decimal not permitted". Actually the scenario is we have a material with KG as a base unit of measure. The ordering unit is "L" litre and the conversion factor is:
1 Litre = 0.792 KG
But when I am going to enter the conversion the system is not allowing to enter decimal. What I need to do in the configuration to enable the decimal entry.
Earliest response will be highly appreciated.
Thanks

>
Imran Khan wrote:
> I have entered 1000 Litre = 792 Kg, but when I order 1Kg, system is converting it into 12.62 Litres.
>
> Thanks
if 792 kg equal to 1000 ltr,
then 1 kg equals to 1,263 ltr.
when do you see this "conversion" to 12,62 litres? in ME21N after you entered 1 KG?
if yes, then your order unit is probably set to liter, further check if you have a rounding profile in material master or info record, that causes the switch from 1,26 to 12,62

Change the Business Graphic Y-axis from decimal scale value to integer

Hi,
I am trying to get rid of the decimal points of the Y axis scale to integer.
The scale value is currently showing like below:
13.86
10.395
6.93
3.465
(This actual data set is currently fall between 3.xxxx to 12.xxxx)
I want the scale label to display in integer, like this:
15
12
9
6
3
or
13
10
6
3
This is determined dynamically as I have made the below settings.I am mapping the seriesSource of the Percentage BusinessGraphic to a node of attributes type of decimal.
In the Chart Designer, I am setting the Y Value Axis configuration as below:
Minimum value: 0
Minumum calculation: Automatic
Maximum value: 100
Maximum Calculation: Automatic
Can you advise me how I can control the graph Y axis scale label to display in integer while I am mapping to a node of decimal data (for percentage values)?
Thanks,
KC

Hi, Poojith.
After making the below change:
1. The "Scaling Type" in the "Value Axis" of the Chart Designer is Linear.
2. I converted the type of the attribute bound to the SimpleSeries to new Decimal(double)
I am still not able to achieve what I want. I am checking the value of the Value Axis --> Line --> Format.
Based on the field description ("Specifies the format of the label output"), it seems like it is the value I should change. It is currently BLANK.
Let me try it out. Please advise if you have any information on the Format string pattern I should use.
Thanks,
Kent

Integer conversion

hi can any one tell me about any APIs for converting from hexadecimal value to a decimal value ie
int a =0x23;
now i want int b = decimal value of a
is ther aby built in support to do this in java???

hey guys
i am getting it as a String like
String s = "0x34";
now i want the decimal value of 34Eh?
Typically "0x34" would mean it's a base-16 number, so the decimal value would be 52, not 34. Was that what you meant?
If so, then strip off the leading "0x" as you're doing and call parseInt, as Dick_Adams suggests. That is, if you want an int. If you want an Integer, then use valueOf. Although I suppose autoboxing/unboxing will render the two equivalent here. I'd still use the one whose return type matches what you want to end up with though.

Visual Composer 7.0-Change the Y-axis from decimal scale value to integer

Hi Experts,
I'm new in Visual Composer 7.0, my report is work fine, but when I want to show the data in bar-chart, the values on y-axis are 0.0, 0.4.0.8,1.2,1.6.2.0 but i want like 1,2,3,4.
Normally, this happen when values on y-axis less than 5, if more than 5, it will turn to 1,2,3,4. (which i expected)
Inside my function module, I set all the data as integer already..
I read through some suggestions in the forum, they suggest using 'Fixed range' and set the interval size, but need to include min & max value. But, inside my program, min value & max value has to be automatically adjusted, ie i can not set the values for those.
Please suggest solution for me, need it urgently..
Thanks a lot!
Best regards,
Derrick

Hi,
first of all: please close this post. It is definitely the wrong forum. Your second thread regarding this is in the right forum.
Secondly: SDN Moderators prefer to move threads from one forum to another instead of having duplicated posts. You as a user cannot move but moderators can do - so contact your forum moderator and he may move it.
Regards
Anja
(Moderator of VC forum)

Character to Integer Conversion

hi all,
can anyone please tell me that how to convert Charecter to Integer? i have a value in
itab-kunnr = '0000023004'. i have to remove 0 in left side and need value only '23004'.
KUNNR is a Charecter.
regards saurabh.

hi
you can use MOVE, write or just assign it to the
required variables.
just have a look at the documentation for the MOVE
hope this helps
regards
Aakash Banga

Error in Integer conversion method equals(...)???

Example:
Integer I = new Integer(0);
If (i.equals(0))
�.
As far as I know, equals(Object obj)�. Therefore, i.equals(0) should generate a compilation error. However, I teststed this with JCreator with the latest 1.6.0_03 jdk. It accepts it and treat the �0� as the actual value.
Therefore, if I do:
Integer I = new Integer(0);
If (i.equals(0))
�.
i.equals(0) return true. Shouldn't it be invalid instead? If returning true is correct, your documentation should reflect so. http://java.sun.com/docs/books/tutorial/java/data/numberclasses.html.
Input is greatly appreciated.

That's due to autoboxing. See http://java.sun.com/j2se/1.5.0/docs/guide/language/autoboxing.html
If you want to see something really screwy, what do you think this returns?
Object o = true ? new Integer(1) : new Double(2.0);

Modbus real to unsigned integer conversion

Is there any alternative way of decoding the two unsigned integer 16 bit words received through Modbus when using reals? I am using the join numbers and type cast functions; however I am not able to download the complete Modbus list to a compact RIO with 32 MB RAM as it runs out of memory.

Khalid,
Thanks for your response. However, let me tell you more about my problem:
Basically my project consists of:
1. A list of shared variables within a library that also contains modbus slave with the communication settings.
2. (5) VIs that used to convert UInt16 to Single (for inputs) and Single to UInt16 (for otputs)
3. (1) VI to display information
As I try to download into a cRIO-9002 with 32MB of RAM, the device drops the communication and goes into safe mode, blinking the STATUS light 4 times, this means "run out of memory" .
I would like to know if there is any other alternative way to overcome this problem. Join and cast is functionally correct but it uses too much RAM

Hex decimal n.o to integer conversion?

Similar Messages

Maybe you are looking for