Change the Business Graphic Y-axis from decimal scale value to integer

Hi,
I am trying to get rid of the decimal points of the Y axis scale to integer.
The scale value is currently showing like below:
13.86
10.395
6.93
3.465
(This actual data set is currently fall between 3.xxxx to 12.xxxx)
I want the scale label to display in integer, like this:
15
12
9
6
3
or
13
10
6
3
This is determined dynamically as I have made the below settings.I am mapping the seriesSource of the Percentage BusinessGraphic to a node of attributes type of decimal.
In the Chart Designer, I am setting the Y Value Axis configuration as below:
Minimum value: 0
Minumum calculation: Automatic
Maximum value: 100
Maximum Calculation: Automatic
Can you advise me how I can control the graph Y axis scale label to display in integer while I am mapping to a node of decimal data (for percentage values)?
Thanks,
KC

Hi, Poojith.
After making the below change:
1. The "Scaling Type" in the "Value Axis" of the Chart Designer is Linear.
2. I converted the type of the attribute bound to the SimpleSeries to new Decimal(double)
I am still not able to achieve what I want. I am checking the value of the Value Axis --> Line --> Format.
Based on the field description ("Specifies the format of the label output"), it seems like it is the value I should change. It is currently BLANK.
Let me try it out. Please advise if you have any information on the Format string pattern I should use.
Thanks,
Kent

Similar Messages

Visual Composer 7.0-Change the Y-axis from decimal scale value to integer

Hi Experts,
I'm new in Visual Composer 7.0, my report is work fine, but when I want to show the data in bar-chart, the values on y-axis are 0.0, 0.4.0.8,1.2,1.6.2.0 but i want like 1,2,3,4.
Normally, this happen when values on y-axis less than 5, if more than 5, it will turn to 1,2,3,4. (which i expected)
Inside my function module, I set all the data as integer already..
I read through some suggestions in the forum, they suggest using 'Fixed range' and set the interval size, but need to include min & max value. But, inside my program, min value & max value has to be automatically adjusted, ie i can not set the values for those.
Please suggest solution for me, need it urgently..
Thanks a lot!
Best regards,
Derrick

Hi,
first of all: please close this post. It is definitely the wrong forum. Your second thread regarding this is in the right forum.
Secondly: SDN Moderators prefer to move threads from one forum to another instead of having duplicated posts. You as a user cannot move but moderators can do - so contact your forum moderator and he may move it.
Regards
Anja
(Moderator of VC forum)

Visual Composer 7.0 - Change the Y-axis from decimal scale to integer

Hi Experts,
I'm new in Visual Composer 7.0, my report is work fine, but when I want to show the data in bar-chart, the values on y-axis are 0.0, 0.4.0.8,1.2,1.6.2.0 but i want like 1,2,3,4.
Normally, this happen when values on y-axis less than 5, if more than 5, it will turn to 1,2,3,4. (which i expected)
Inside my function module, I set all the data as integer already..
I read through some suggestions in the forum, they suggest using 'Fixed range' and set the interval size, but need to include min & max value. But, inside my program, min value & max value has to be automatically adjusted, ie i can not set the values for those.
Please suggest solution for me, need it urgently..
Thanks a lot!
Best regards,
Derrick

Hi All,
I'm sorry but this seems to me impossible to do.
In general - not necessarily for this case - there is the option to create your own Flash Components and integrate them into VC, so you could overcome such limitations.
Using Flash Components in Visual Composer Models - SAP Documentation
Flash Components for Visual Composer 7.0 - Flexibility is the name of the game
Thanks,
Udi

Possible to change the business Partner from a created Contract in ICWEB??

Hello experts,
I would like to know if it is posible to change the BP from a created contract in ICWEB.
I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
Can you help me, please??
Thank in advance.
Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

Hello S Reddy and a lot of thanks for your help.
But I don't know where I can select this option, there isn't the where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
Thanks in advance.
Regards.

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Hiding the business partner search parameter from search criteria

Hi,
I have business partner search parameter whose value is hardcoded in the lead search..
I would like to hide the business partner search parameter from displaying only..
I need to achieve it programatically and not in configuration and all.
Do I need to write the code in P method or which method?
Thanks
Madhukar

Hi,
The code is as below and I just need to have the functionality of BP search field intact but hide it from display in web UI..if any correction is required let me know..
***current date is populated into LV_DATE
DATA lv_date TYPE string.
lv_date = sy-datum.
***current user login name is populated into LV_SUNAME
DATA lv_suname TYPE string.
lv_suname = sy-uname.
***Fetching the BP ID of the current user who logged into L_PARTNER
DATA:l_partner TYPE bu_partner.
CALL FUNCTION 'CRM_ERMS_FIND_BP_FOR_USER'
    EXPORTING
      iv_user_id = sy-uname
    IMPORTING
      ev_bupa_no = l_partner.
***structure for BUT051
TYPES : BEGIN OF ty_data,
           relnr    TYPE bu_relnr,
           partner1 TYPE bu_partner,
           partner2 TYPE bu_partner,
           date_to TYPE bu_datto,
         END OF ty_data.
***work area for BUT051
DATA wa_but051 TYPE ty_data.
***Fetching Dealer BP ID which is 'PARTNER1' field in BUT051
SELECT relnr
         partner1
         partner2
         date_to
FROM but051
INTO wa_but051
UP TO 1 ROWS
WHERE partner2 = l_partner.
ENDSELECT.
***Geting the dealer BP ID into LV_DEALER
DATA lv_dealer TYPE string.
lv_dealer = wa_but051-partner1.
DATA: lr_qs          TYPE REF TO cl_crm_bol_dquery_service,
        lr_search_node TYPE REF TO cl_bsp_wd_context_node_asp,
        lr_col         TYPE REF TO if_bol_bo_col ,
        lr_iterator    TYPE REF TO if_bol_bo_col_iterator ,
        lr_param       TYPE REF TO if_bol_bo_property_access,
        ls_selection   TYPE genilt_selection_parameter,
        lv_low         TYPE sy-datum,
        lv_attr_name   TYPE name_komp ,
        lv_value_set   TYPE abap_bool .
IF iv_first_time EQ abap_true.
* to initialize the search view.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
* fetch the search node and its content.
    lr_qs = me->get_current_dquery( ).
    lr_col = lr_qs->get_selection_params( ).
* check the currently visible search attributes.
    lr_iterator = lr_col->get_iterator( ).
    lr_param    = lr_iterator->get_first( ).
    WHILE lr_param IS BOUND.
* get the parameters
      lr_param->get_properties( IMPORTING es_attributes = ls_selection ).
      IF ls_selection-attr_name = 'VALID_FROM'.
* SET_PROPERTIES
        ls_selection-low = lv_date.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
        lv_value_set = abap_true .
        EXIT.
      ENDIF.
      IF ls_selection-attr_name = 'BU_PARTNER'.
* SET_PROPERTIES
        ls_selection-low = lv_suname.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
            lv_value_set = abap_true .
        EXIT.
      ENDIF.
      lr_param = lr_iterator->get_next( ).
    ENDWHILE.
    IF lv_value_set EQ abap_false .
* it was not part of the visible attributes, then add it at the end.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'VALID_FROM'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_date.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'BU_PARTNER'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_dealer.
    ENDIF.
* for a proper display of the added / changed attribute.
    lr_search_node = get_dquery_cnode( ).
    lr_search_node->build_parameter_tab( ).
ELSE.
* non first time call - just delegate to superclass.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
ENDIF.

How to Change the business process

How Do I change the Business process which was created wrongly for different company code? When I try to change the company code it says that currency cannot be changed as data is already posted. Since the Analysis period is from 01/01/2008 to 12/31/9999, I am not able to select the new analysis period.
The data posted is relatively small because it was just created 10days ago.
Your help will be appreciated.
mani

If only plan data entered, try to delete the planning data before delete the object and then re-create it again. Otherwise you may have to leave it as is and change the description for the usage by the different company code.

Setting series color in the Business Graphics UI element

Hi all,
I'm using the Business Graphics UI element in my Web Dynpro application.
I set the color for various properties using chart designer, then I add the generated XML in the doModifyView method: bg.setDirectCustomizing(xml file) and most of it works.
However, when I change the series' color, I don't see any change in the xml file (see snapshot).
http://img90.imageshack.us/my.php?image=graphjy1.jpg
My xml starts with <SAPChartCustomizing> and ends with </SAPChartCustomizing>.
How can I set the series' color using the custom xml file?
Thanks,
Omri

Hi,
as the connection between your data and the customizing settings works via IDs you have to make sure that you set exactly the same ID for a data series as defined in the chart designer.
In case that you use point customizing make sure that you do not set an ID for the points of your series. Instead set the series customizing ID for the series only! Keep in mind that point customizing always overwrites series customizing if both are defined.
Regards, Kai

Refresh the Business Graphics Data on click of next page event of a table

Hi Experts,
We are using Business Graphics UI element in Web dynpro Java to display a table data.
We are limiting the graphics data to 12 table entries at a time.
Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
But I am not able to get the action for the Next Page event.
Please note that we are on Netweaver 7.01.
Kindly suggest as how can we achieve this functionality.
Kind Regards,
Anurag

check this
Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

HT5787 My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

Contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

HT201318 I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one

I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one. HELP PLS?

Did you actually watch the movie? You get 30 days in which to view it and if you didn't watch it, that could be why you are getting that message. If you have watched the movie and you're sure that is has expired by now, contact iTunes Store Support and seek their help.
Change the country in the upper left. - and click on Purchases, billing and redemption to proceed.
https://getsupport.apple.com/Issues.action

I am trying to change the tempo of a loop from Garageband.

Hi,
I am trying to change the tempo of a loop from garage band. I have seen video tutorials where people would do this from just below their tabs in their editor. However I cant get that option to come up.
Also, I have tried using the Apple Loop utility, and I can change the BPM at the bottem but then it wont let me save the file.
I would prefer to change the tempo in soundtrack pro but at this point I will try anything.
Thx for listening.

Left pane, Project Tab. Scroll down to the bottom and find tempo and key settings. These will control any loops in your project.

How do I change the name of my iMac from my wife's name to our surname?

How do I change the name of my iMac from my wife name to our surname?

System Preferences - Sharing - Change the name of the computer in the Computer Name box.

Can you change the extensions in Adobe Muse from .html to .htm?

Can you change the extensions in Adobe Muse from .html to .htm?
I'm updating an old site where the extensions for the pages were all.htm. This means that when I upload the site index.htm is not being over written by index.html.

Hi,
It is not possible to change the extension in Muse at the moment. You can export the site as HTML and change the extensions outside the Muse.
Regards,
Aish

Change the Business Graphic Y-axis from decimal scale value to integer

Similar Messages

Maybe you are looking for