Hey guys, will this motherboard support the new 45nm C2D?

This is the board i'm looking to get for my new CPU and future SLI:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130081
The MSI website says that "After 1.5" the mobo will work with the 45nms up to the 8200, I assume that even the 8300-8400s will work since they're just a increase in operating frequency. I just want to be extra sure. Btw, even without the bios update, will I be able to boot into Windows so I can download the bios first? I do not have a floppy drive to flash from.

to answer your question, it would really need somebody have the board and the cpu to test out then only can tell you whether it works or not.
however, do know that this board only support Wolfdale, but not Yorkfield quad core CPU, due to chipset limitation.

Similar Messages

HT201343 I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5- do I need Maverick and will this hardware support the Airplay Mirroring?

I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?

It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work.

When will Lr 5 support the new Canon 7D Mark II?

Just got the Canon 7D Mark II today!!! So far I am very impressed with it but I shot everything in RAW. I guess will have to use the Canon software to convert the files. I don't like that software so I'm hoping that Adobe has an update soon!

Keith I have read the above messages and I didn't find that anyone, using your words, presented: "always someone else's fault... attitude that frequently pervades these threads".
I also own the new Canon 7D Mark II. I totally forgot the camera raw lag time for new cameras. It has been years since I bought a camera when it first came out. So in my mind not thinking about the converter available lag time is a reasonable lapse. I admit it is my issue and Canon's and not Adobe. My issue because I forgot about the lag time and didn't even think about the issue. If you prefer, you can say that I am an old lady so no wonder she forgot she is just an old lady.
Where the actual problem comes from camera manufactures, not Adobe. They should have the software available to Adobe and other software manufacturers that work with the CR file prior to the deployment of the camera. They are making good money on the cameras. I would think they would want the whole package available at one time from shutter release to picture release. Maybe someone can explain why camera manufacturers don't release their file format 3 months ahead of the release for purchase of new cameras. That would allow software manufacturers to prepare the software so that it is available when the camera is ready. That would avoid discussions such as this one.
Yes I have already started shooting both Raw and JPEGs, before I read the above suggestion. Yes, I am waiting on Adobe to come out with the needed update. Yes, I take responsibility for getting caught with my software down to my ankles.

Will Element 13 support the new Sony A7 II Camera in RAW?

I recently purchased the Sony A7 II and my old LR does not recognize the files produced by this camera. I want to purchase Element 13 but before I do I would like to know if I it will work? Thank you in advance for any help.

Yes, pse 13 will support that camera.
After you install pse 13, you would just have to go to Help>Updates from within the pse 13 editor to get camera raw 8.7.1, which has support for your camera.

Will Adobe AIR support the new Android Wear OS?

Because if it did, that would be amazing!
If you haven't heard of Android Wear yet, check out:
http://news.cnet.com/8301-1023_3-57620475-93/google-unveils-android-wear-its-modified-os-f or-wearables/
http://moto360.motorola.com/
http://www.engadget.com/2014/03/18/lg-g-watch-android-wear/
That moto 360 is damn sexy, and i'd love to be able to develop apps for it using AIR.

I can build from Flash Pro to Google Glass ok, though there are a number of gestures that Flash doesn’t know about. Perhaps someone will do an ANE to handle the wearable device special gestures.

Will Jrockit support the new Itanium Montecito chipset ?

Hi,
I am hoping if someone in BEA can
Q1: inform me of the existing JRockit 5.0 will support the new Itanium Chipset (code name Montecito)
Q2: if there is a new JVM planned for this chipset when it will be available.
I checked the Jrockit product page (http://edocs.bea.com/jrockit/jrdocs/suppPlat/supp_50.html), but didn't find any details.
Thanks,
Edwin Meijer
HP

Well we just tested a couple things and aparently SATA 1 or 2 or both don't work right still. I didn't test exactly which one wouldn't work with the drives, since we just wanted to get his raid setup started. So we have the two drives on SATA 3 & 4 and after multiple reboots, no clicking, and looks like everything works great.
Still need to test and see how it goes after a couple days of use, but seems like everything is running smoothly. Again, thanks for the help!

HT1695 Hey, guys! I connected to the wi-fi by my iPhone (5) for 3 weeks. Now my iPhone doesn't connect to the network anymore. And I can't understand why. Will you please help me? It's strange,cause tonight I connected frequently. But now I can't! :(

Hey, guys! I connected to the wi-fi by my iPhone (5) for 3 weeks. Now my iPhone doesn't connect to the network anymore. And I can't understand why. Will you please help me? It's strange,cause tonight I connected frequently. But now I can't! :(

Hello LNIN5,
Thank you for using Apple Support Communities!
I have a couple resources for you to help troubleshooting wifi connection issues with an iOS device.
The first is named iOS: Troubleshooting Wi-Fi networks and connections and can be found here http://support.apple.com/kb/ts1398.
Take care,
Sterling

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

You can run iPhoto 9.2.3 with the system you currently have. It's available thru iLife 11 as Niel has already mentioned.
OT

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

Do you have the latest camera raw installed for Photoshop? If so, you can find the profiles in /Library/Application\ Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon/ . Lightroom should recognize them if you move them into your home directory's Library folder in the exact same folder structure (but in the Library folder in your home directory). This is assuming you are using Mac OS X. No clue where these files would be on Windows. If you don't have Photoshop, you can install Camera Raw using the combined installer with DNG converter which is a free download from Adobe. This should (I think) give you the profiles in that exact location without owning Photoshop.

The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

There are several other similar posts in this forum with the answers. Your post appears third in my Google search today looking for a solution so I thought I'd add the solution here as well.
It is obviously a bug in either (or both) Firefox and the NYT.
The quickest solution is to simply go to the VIEW Menu in Firefox, then the ZOOM option and choose RESET.
I use Mac and this happens in Firefox 3.6.10. It does not happen in other browsers like Safari, Chrome and Camino, and it did not occur before last week.
It has also occurred in the iOS version of Safari on iPad. Not sure how to fix it there.

Will my 2010 Macbook Air that is currently running Lion 10.7.5 support the new Mountain Lion OS?

I habe an older Macbook air. Its a 2010 and is currently running Lion 10.7.5. I was wondering if it would be able to support the new Mountain Lion OS?

In addition to Stedman's spot-on reply --
When you buy an upgrade disk, all updates in that OS can be found on Software Update.
For instance, I bought Snow Leopard at 10.6.
All other updates have been free and downloadable. So I'm not a 10.6.7.
10.4 (Tiger) went to 10.4.11.
10.5 (Leopard) went to 1.5.8
10.6(Snow Leopard) is currently at 10.6.7.
Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
After that, updates are free til 10.8 comes out.

HT2534 Hi, if I create a new iTunes Store etc account to access a European iTunes store, will this wipe all the apps I've downloaded via my UK AppleID (which I'm using across 3 different devices)?

NB. the app I'm initially interested in downloading for is the paid global/worldwide BBC iPlayer app that's only accessible outside the UK, if that helps.
Message was edited by: HayMow

Hi ...
if I create a new iTunes Store etc account to access a European iTunes store, will this wipe all the apps I've downloaded via my UK AppleID (which I'm using across 3 different devices)?
Yes.
And, your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Hey guys, will this motherboard support the new 45nm C2D?

Similar Messages

Maybe you are looking for