Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago. Proglamet says that the computer does not support Power PC. Help

Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago.
Proglamet says that the computer does not support Power PC. Help
When I try to start it says (program "Acrobat 6.0.2 Professional.app" can not open because PowerPC applications are no longer supported.)
Please help

The version of Acrobat you have is a PowerPC application and will not run on Mountain Lion.  You will need to upgrade/purchase an Intel version of Acrobat Pro, probably Version 9.
It might have been worth checking to see if the apps you run are supported on ML before upgrading.  If you backed up your system before the upgrade you could always revert to your previous level.

Similar Messages

  • HT3775 For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file. What can I do to fix this problem?

    For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file.

    The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0 

  • Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Try a reset:
    - Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
    If issue persists try:
    - Another known working cable
    - Check the charging port for any damage or debris
    - You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

  • Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem tra

    Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem transfering some but not all music from computer to ipad.  Can anyone help?

    Interesting. Maybe it is more of a DRM issue than an Apple ID ownership issue. There is actually an iTunes Support section here on the discussion boards. If you wish to continue troubleshooting, you might post your question over there and refer to this discussion thread. You can also contact someone in Apple iTunes Support.

  • I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

    I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

    Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
    That will take you to 10.6.3.
    If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
    SL system reqmts;

  • I cannot email photos from the iphoto program?  Message says that the server does not recognize password or username?

    When trying to email  a photo from the iphoto program a message appears saying that the server does not recognize the password/username.  How do I correct this?

    You've posted twice. I replied here: https://discussions.apple.com/thread/3421137?tstart=0

  • I posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change t

    I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
    My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
    my e-mail - [email protected]

    While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
    I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
    We do not understand why this problenm occurs.
    Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
    I guess it is because of the **** Apple FIrmware written on the label.
    Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
    However Shootist007 thanks for your message, but given what I said I do not think is a cable problem.

  • HT5654 My iphone was updating to ios 7.0.2 and then i went in to itunes recvery mode now i tried to recover but it says that the host is unavelible so what can i do?

    My iphone was updating to ios 7.0.2 and then i went in to itunes recvery mode now i tried to recover but it says that the host is unavelible so what can i do?

    Hi there,
    You may find the article below helpful.
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W. 

  • Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?

    Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?

    If you've had it for less than a year, then it's still under warranty.  Take it to an Apple store or an authorized service facility.  See http://support.apple.com/kb/HT1434

  • HT1386 I have changed computers and when I try to sync my apps, I keep getting a message saying that the computer is not authorised to sync the apps even though I have authorised the computer.

    Hi, I have just set up iTunes in my new computer and have 'synced' my iphone, however, my apps have not synced, I keep getting a message saying that this computer is not authorised to sync the apps even though I have authorised it.  I don't know if the issue is the fact that I had to set up a new apple ID?  Any suggestions would be appreciated. Thanks

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • After i have finished downloading the app premiere cc it says that the patch field to launch could someone help

    after i have finished downloading the app premiere cc it says that the patch field to launch could someone help

    What happens when you
    Connect the iPod to your computer and restore via iTunes?
    iTunes: Restoring iOS software

  • My iPhone Apple ID is not the same as my home computer Apple ID. This seems to cause iTunes to tell me that certain purchases can't be synced, reason unauthorized. The authorize function under Store says that the computer is authorized. What to do to sync

    The home computer iTunes will not let me sync certain apps bought directly from iTunes with the iPhone. The two ID's (home Apple id and iPhone id) are not identical. The Store 'Authorize' function tells me that the computer is authorized. How do I get all apps to sync across all devices (I also have an iPad). Thanks.

    you need to be signed in on both devices to teh apple id that the apps were bought on to sign out on the device go to settings>store >tap on apple id >choose sign out>tap on sign in, to sign out on the comp click on stre at top>sign out >sign back in with the correct apple id

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT4628 My MacBook pro has suddenly stopped connecting to Internet and says that "no air port card installed". Please help

    It was working all ok until last night, just tried connecting through cable but I am still unable to do so. How do I fix this? Any help?

    What do you mean by "tried connecting through cable"?  I can think of two different things you might mean.
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
    2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
    3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".  Note that the fix this step implements may be temporary.
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • We keep getting a message saying that the iPad does not support adobe flash sites i.e. news videos etc what can we do

    Keep getting videos blocked and a window saying adobe flash not available for this site. Is there a fix?

    There are some browsers in the app store that do support flash. But you would be well served to read the reveiews and see if they'll work for you. They seem to have mixed results and compatibilities.
    Adobe and Apple are at an impasse when it comes to flash. Adobe could never make aversion that Apple accepted, Apple wouldn't accept anything that Adobe made and now Adobe has announced that they're abandoning ALL mobile flash work....so those websites that depend solely upon flash will be needing to find a better way to accomodate the smart phone/mobile device phenomenon, because they're depending on what is not defunkt technology.

Maybe you are looking for

  • ANY DVI KVM Recommendations?

    I'm looking at the Gefen 2x1 DVI KVM Switch: http://www.kvm-switches-online.com/ext-dvikvm-241.html It seems that it has a good reputation so far. Can using a KVM damage your display?

  • Wrong Purchase order please help

    Frdns i posted PO with wrong vendor, so is there any way i can change the vendor on the same PO or i can cancel the PO ? Please help Thanks

  • Role Validity date

    Hi Guys, I have a role assigned to a user with a validity date (say 01/20/10 to 04/20/10). However after the expiry date the user is able to perform actions related to that role. I do have PFUD scheduled which runs every day. I understand that prgn_c

  • Adobe Reader Freeze

    Why is Adobe Reader preventing me from shutting down my computer?

  • Many to Many Retrieval Issue

    While understanding the limitation of having both a child and parent both be updatable, I am having trouble getting the child (read only mapping) to retrieve the appropriate objects??? is there some trick to get this to happen? the writable mapping i