Hey :) Need some help from someone a bit more tech...

Would anyone please check if my cabinet will get Infinity please? Apparently its coming on the 31st March I know about 100 metres down the road gets Virgin Media but we dont! Its a new build estate. My postcode is LN1 1AW. 
Thanks in advance
J

Not been able to found the cab just yet, but i did a little research. Basically i took 10 different postcodes between my house and lincoln exchange, some on small roads and some on main roads. I also used property numbers so it would be a little more accurate. I put all of these addresses into BT's wholesale checker. None of them came back with a message saying that they were due to get fibre? Surely this is a little bit strange. Lincoln is being upgraded and 1/2 of the city won't be getting it? 
Thanks
J

Similar Messages

  • Need some help from the management : A deeply dissatisfied customer

    Hi,
    I hope I am one of the very dissatisfied customers of you company. I bought a new T715 and it has already gone for a repair twice. I gave it for repair for the first time in october (ETA was 20 days and told by the service centre) and I got the phone after some 30days only after an intervention of a manager. Prior to that the customer care was saying that they do not have the parts and they have no idea about how much time the repair is gonna take. Surprisingly it took only 2day once the manager intervened.
    When I was submitting the phone on jan 14th 2011(work order number SE311MM110015), they again said that I'll get my phone back in 20 days. This time I expected that the service center guys will learn some thing from the past incidents and provide me a better service. But this time it was even worse. I did not hear from them for 35 days. So I called the customer care and had a long conversation with them on the service that is being provided but no-one including the floor supervisor(nishant) had a clue about what happening with my phone. I was startled by thier reply that they will start working on it as I have registered the complaint. Then I asked them what were they doing till now for which they had no idea. I asked for an escalation of this case to a manager which they refused. They said that I'll get an update after 48 working hours(5days).
    The episode continues. I called the help desk after 5days. Now their reply is that I will get my phone back on march 10 2011. So, it is some 57 days since the day i submitted the phone which is 3 times the ETA they promosed. Now when I ask them why is it taking so long I get the same reply as I got for the first time that they do not have parts. The I told them I cannot accept this kind of service from a company like sony erricsson for the second time. For this the floor supervisor harish said that If I want my phone back earlier they'll return the piece back to me without repairing and they are not responsible for this. This time I again asked for a managerial escalation which they again refused and asked me to call after 2 days. Can I atleast hope for a positive reply this time??
    I am perfectly okay with one device out of a lakh being defective. I understand this is the reason that you provide the customers a warranty. But I have some issues with the support which you are providing:
    1) Managerial escalations : I think I am entitled to talk to some one who can actually solve my issue when the lower level doesn't solve it in time. I do not understand why I am being denied the escalation which I did not find in any other support. They do not even provide me an email ID of a manager.
    2) Support process : What is the use of those processes in place where the people I am talking have no idea of what the next step should be. They do not have the database or knowledge of the previous cases. Even the floor supervisor have no aswers to the legitamate questions that the customer poses, they talk as if they are not responsible for these issues.
    3) Time taken: Taking some  days to provide the customer a mere update is not how a 21st century support should work.
    I hope you people agree with my ideas. And please I request all the managers who stumble upon this thread to reply and guide me about my next action.
    Thanks and Regards
    PRakash Josyula
    Work order number : SE311MM110015

    @management : Please help me... I did not get my phone back yet... this time they were saying that they will investigate into this case and this process can take 10 more days... When I asked for a manager escalation they dropped the call... And surprisingly they started dropping my calls which is not at all acceptable...
    Please managers... I need to talk to you... I need my phone back repaired....
    @others... Please lemme know a contact of a person in managerial cadre if you are ware of one...
    Plleeeeeeeeeeeeeeeeeeeeeeeeeese

  • Alright I give! I need some help with groups/busses and more please..

    Hi all,
    Well, its now been a few weeks of my off and on testing with my new Logic Rig, I have every plug I can transfer over to UB that I can and now am trying to get deeper into things.
    First I struggled with learning the environment (I still dont get it fully) but now I am really confused about group and fx tracks.
    - Am I missing something or is everything just a buss turned into a group? This also included creating an FX track?
    If this is the case then its not nearly as complex as I think it is but I cant figure certain things out with the way logic handles naming in regards to its busses.
    Lets say I want to create a sidechain group. I take an audio track change it to represent buss (1), I then rename buss 1 to SC-GROUP, now any window that I drop down to find the newly names SC-GROUP always remains named as buss (1). This even happens when I rename the buss direct from the audio environment.
    I must be missing something, whats been confusing the heck out of me is that no matter how I try and name things they always remain their original names in any menues as the example of the buss (1), so how do I rename these channels so I can clearly know exactly where I am routing audio?
    So lets summarise where I am lost so far hehe.
    1. Are groups really just empty busses renamed to act as a group?
    2. How can I rename a buss/group and be able to see the renamed channel in the menues.
    and for the 3rd new question of sorts...
    3. FX Sends, again is this just a buss that has an AU inserted into its channel and then rout the insert of an additional audio channel to the buss with the FX inserted?
    and now my last uestion of the day if I have not confused you to death so far
    Why is it that when I add a AU lets say battery as instrument 1, when I add another in the window and I rerout an instrum,ent track the next AU shows up at the bottom of the list instead of inst. 2?
    If I am not explaining myself clearly enough for any of my examples let me know so I can try to better represent my questions. I am still so new to Logic and still have yet to get the bulk of the simple operations down just yet..
    Thanks again for all your asistance!

    Thank you guys,
    So if I understand right, a sub buss is nothing more than a routing the output of a few channels to a buss to control a few aspects like I had mentioned compressing an entire group of tracks EG: a drum buss (in this situation a drum sub buss?).
    So I will have to reffer to the manual again to read the details on an actual group since it does seem there is a difference EG: the group can actually manipulate the faders of channels routed to the group?
    FX busses seem to be just that, slap an FX info either and AUX channel or a buss and then set the insert of that AUX or buss desired.
    The reason I asked about naming is that lets say I have 6 effects tracks I wish to use lets say as an example AUX1=Short Delay, AUX2=Long Filter Delay, AUX3=Slap Verb, AUX4=Long Verb and so forth.
    When I go to actually use these inserts I need to assume I know exactly what AUX I assigned each effect to, if I could simply rename this AUX track to refference the effect it would make so much more sense then trying to remember what AUX5 was.
    In regards to my last question here is a bit more of a detailed explanation, please bare with me as I am not in front of my computer.
    1. I add battery into Audio Instrument-1
    2. I then configure my environemt to use my AUXs I already have inplace for audio routing.
    3. I then edit the Audio window create the midi for a new multi-instrument.
    4. I come back to the main arrange window and hold-click on the next available audio-instrument and in the instrument window battery will be instrument 1 out of how ever many blanks apear EG:25+
    5. Now I go to add lets say Stylus RMX into the next available mutli audio instrument. I then repeat steps 2,3,4.
    Now when I get to step 4 this time instead of audio instrument 2 from the lint being Stylus it shows up as the last possible instrument in the drop list that appears under audio instrument from hold-click on the audio-instrument track.
    Its just odd, it should be instrument 2, but instead it shows up as the last possible choice.
    Maybe I am doing something wrong, even sometimes when I grab on of batteries midi tracks and create next object I will get a random audio track in there out of no where, or maybe its just a bug with battery.
    Any ideas? If I still am not describing this right, I will post a step by step this eve of exactly the steps I am taking.
    Thanks again, this forum has been very helpful in getting me going with the questions I just cant seem to get around from my Nuendo work flow.
    Cheers!

  • HELP! I need some help from true Mac fans! What should I buy???

    So, I'm moving to Japan, which has a couple of implications (other than the fact that my wife's parents and my parents are looking for any legal recourse to stop us from taking their only grandchild out of the country). More importantly however, I have had to sell my B&O TV and music system (different signals from the UK where we now live). I also decided to sell our stereo (or rather my wife decided it was too bulky so as long as it was not in the living room or bedroom I could keep it...). Finally, I need a new laptop for personal use. I have some friends that are absolute mac fans, who have convinced me to go over to the other side (i.e. yours).
    The opportunity I now have is to create a complete system as I need a laptop, something to play my music, a TV, etc. Given I am starting from a clean sheet I was hoping somebody out there could help me 'design' a complete set-up. My wife and I are keen photographers (both photography and video), we like listening to music, and watching movies (we definitely need a region-free DVD player), so what should we buy?
    Any input would be hugely appreciated.

    OSX also supports IME right out of the box.
    日本語　ー　わかりません
    It sets up pretty well, too; I like it more than Mircrosoft's implementation (language bar).
    Only thing to keep in mind is where you buy the MacBook; if you get it in Japan you'll get a Japanese keyboard, which displays most of the kana alongside the keys. You also get the conversion and switch keys on the keyboard itself, which is great.
    The MacBook Power Unit is multi-voltage, so no matter where you pick it up the worst you need is a plug adapter; although getting one from apple would be best. Just don't think you need to buy a new power unit, only the plug and cable.

  • Pulling out my Hair, need some help from experts out there

    Hi - I have been struggling with an issue for a week now and I was wondering if one of you can help me to solve my issue. I have done numerous searches on this topic which got me somewhat in the right direction but I'm still not getting the results I want. The end objective is simple, a non-stuttering video on YouTube. Sounds simple right?
    here is what I did:
    I have recorded some aerial footage with a GoPro 3+, added some effects in After effects, brought the results over in Premiere pro for some minor editing and then used Media encoder to get it to a format that youtube likes. My detailed steps are as follows:
    -Take GoPro footage (59.94 fps, 1920 x 1080 in H.264 codec) and transcode it through GoPro studio using the CineForm codec so it plays nice with AE (I keep my 59.94 fps and same dimensions (1920 x 180).
    -Load transcoded footage in AE (I checked if my composition settings are the same as the imported transcoded footage)
    -Apply effects (3d camera tracking, add some 3d text, some lights, environment layer) and render the clip out as a quicktime lossless file (PNG) – result is 3 clips from AE that I now want to bring into Premiere Pro for some editing
    -Import PNG file in Premiere Pro (I drag the clip to new sequence item so the sequence matches the clip I import in Premiere pro)
    -I make some minor edits in Premiere Pro (some transitions between clips, nothing fancy)
    -I then render out the footage using media encoder (or directly from Premiere, tried both) with the following settings:
    Format: h.264
    Preset: custom
    Export video and audio
    TV standard: NSTC
    Frame width: 1920
    Frame height: 1080
    FPs: 29.97 or 59.94 (results/problem is the same with both fps settings)
    Field order: progressive (greyed out – can’t change it)
    Pixel aspect ratio: 16:9 – widescreen
    Profile: main
    Level: 4.2 or 5.1 (same result for both settings)
    Render at maximum depth: checked
    Bitrate encoding: VBR, 2 pass
    Target bitrate: 8 or 20 (same result with both settings but obviously larger file with higher target rate)
    Maximum bitrate: 8 or 25 (same results for both settings)
    Use maximum render quality: checked
    Audio, multiplexer etc: standard settings, no change
    The rendered video runs smoothly on my mac but when uploading this video to youtube, the video stutters. I have tried multiple settings and can’t get the video to play smooth. Any tips or suggestions are welcome!
    You can watch the video here:
    Furnace lake edit 1 - YouTube
    Thanks.

    sanderx1 wrote:
    Hi - I have been struggling with an issue for a week now and I was wondering if one of you can help me to solve my issue. I have done numerous searches on this topic which got me somewhat in the right direction but I'm still not getting the results I want. The end objective is simple, a non-stuttering video on YouTube. Sounds simple right?
    Thanks.
    Rick has given you what you need, he always does.
    But the task you've described is not simple at all. It's not really an After Effects issue.
    There are many sites that offer good recommendations for maximizing your youtube workflow so your video looks the best and plays flawlessly. Youtube offers a good set of parameters. Some of this stuff is worthless, too. You've got to be selective.
    Starting out delivering a full 1080HD clip is not necessarily going to work out for you. Try rendering out to a 720 file. It's far smaller so it will be compressed much less by it's upload processor. The playback may be smoother and your audience is not going to be able to tell the difference between the 720 and a 1080 clip, most of the time. 
    Encourage you to drop back someday and let us know how you made out with Rick's advice.
    How to Make Professional Quality YouTube Videos: 6 Steps
    How to Make Good YouTube Videos for Video Marketing: 8 Steps
    How To Make Videos Look Great on YouTube - YouTube
    How to Make YouTube Videos Look Great
    Video quality - YouTube Help
    Tips of Getting Best YouTube Video Format for YouTube Uploading

  • Macbook Pro 2010 is running slow. Need some help from you guys!

    Can you guys help me out with some advice on how I can help it to run faster? I believe I have pasted al of the needed information below (if not, please let me know.)
    If someone could please take a look at this and let me know what I should do to help speed up/clean up my mac so that it runs faster. I'm rather new to this so the more straightforward the instructions, the better! Thanks guys!
    Start time: 21:16:46 07/13/14
    Model Identifier: MacBookPro7,1
    System Version: OS X 10.9.4 (13E28)
    Kernel Version: Darwin 13.3.0
    Boot Mode: Normal
    Time since boot: 20 minutes
    Diagnostic reports
      2014-06-17 VMware Fusion Helper crash
      2014-06-17 VMware Fusion Helper crash
      2014-06-21 VMware Fusion Helper crash
      2014-06-24 VMware Fusion Helper crash
      2014-06-25 VMware Fusion Helper crash
      2014-06-27 VMware Fusion Helper crash
      2014-06-29 VMware Fusion Helper crash
      2014-06-30 Adobe Flash Player Install Manager crash
      2014-07-08 VMware Fusion Helper crash
      2014-07-08 VMware Fusion Helper crash
      2014-07-13 VMware Fusion Helper crash
    Log
      Jul  9 17:47:57 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul  9 19:43:43 image 1362681856 (63%), uncompressed 2215559168 (540908), compressed 1354392912 (61%), sum1 deadda7e, sum2 24db8530
      Jul 10 22:43:44 PM notification timeout (pid 3620, hpdot4d)
      Jul 11 16:38:49 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 11 16:39:25 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 11 16:40:00 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 11 16:43:22 process WindowServer[3063] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
      Jul 11 19:28:16 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 12 11:49:26 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 12 11:51:43 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 13 18:31:40 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 13 20:49:36 MacAuthEvent en1   Auth result for: 78 Auth timed out
      Jul 13 20:52:10 wl0: Roamed or switched channel, reason #8, bssid 78
      Jul 13 21:01:01 process WindowServer[166] caught causing excessive wakeups. Observed wakeups rate (per sec): 380; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45074
    kexts
      com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN (1.0.0d1)
    Daemons
      com.vmware.launchd.vmware
      com.sierrawireless.SierraSWoCMon
      com.microsoft.office.licensing.helper
      com.macpaw.CleanMyMac2.Agent
      com.adobe.fpsaud
    launchd
      /System/Library/LaunchAgents/com.apple.noticeboard.agent.plist
      - com.apple.noticeboard.agent
      /System/Library/LaunchDaemons/com.apple.gkbisd.plist
      - com.apple.gkbisd
      /System/Library/LaunchDaemons/com.apple.noticeboard.state.plist
      - com.apple.noticeboard.state
      /Library/LaunchDaemons/com.adobe.fpsaud.plist
      - com.adobe.fpsaud
      /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
      - com.macpaw.CleanMyMac2.Agent
      /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
      - com.microsoft.office.licensing.helper
      /Library/LaunchDaemons/com.sierrawireless.SWoCMon.plist
      - com.sierrawireless.SierraSWoCMon
      /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
      - com.vmware.launchd.vmware
    Startup items
      /Library/StartupItems/HP IO/HP IO
      /Library/StartupItems/HP IO/Resources/version.plist
      /Library/StartupItems/HP IO/StartupParameters.plist
    Bundles
      /System/Library/Extensions/AppleFSCompressionTypeLZVN.kext
      - com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN
      /System/Library/Extensions/BeceemAppleWiMAXAdapter.kext
      - com.beceem.BeceemAppleWiMAXAdapter
      /System/Library/Extensions/Franklin Wireless Modem.kext
      - com.fklt.driver
      /System/Library/Extensions/NovatelWireless3G.kext
      - com.novatelwireless.driver.3G
      /System/Library/Extensions/NovatelWirelessFilter.kext
      - com.novatelwireless.driver.DisableAutoInstall
      /System/Library/Extensions/SierraDevSupport.kext
      - com.sierrawireless.driver.SierraDevSupport
      /System/Library/Extensions/SierraFSCSupport.kext
      - com.sierrawireless.driver.SierraFSCSupport
      /System/Library/Extensions/SierraFSRSupport.kext
      - com.sierrawireless.driver.SierraFSRSupport
      /System/Library/Extensions/SierraHSRSupport.kext
      - com.sierrawireless.driver.SierraHSRSupport
      /Library/Internet Plug-Ins/Flash Player.plugin
      - N/A
      /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
      - net.telestream.wmv.plugin
      /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
      - net.telestream.wmv.webplugin
      /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
      - com.microsoft.sharepoint.browserplugin
      /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
      - com.microsoft.sharepoint.webkitplugin
      /Library/Internet Plug-Ins/Silverlight.plugin
      - com.microsoft.SilverlightPlugin
      /Library/PreferencePanes/Flash Player.prefPane
      - com.adobe.flashplayerpreferences
      /Library/PreferencePanes/Flip4Mac WMV.prefPane
      - net.telestream.wmv.prefpane
    Global login items
      /Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app/
    Font issues: 41
    DNS: 208.67.222.222 (static)
    Restricted files: 3585
    Widgets
      iCal
    Elapsed time (s): 329

    I'll try that for sure. Anything else look like it could cause an issue?

  • Hey need some help and am scared i am getting hacked., Hey need some help and am scared i am getting hacked.

    I have emailed a itunes support guy named noel ask a question about buying add-on content. . I was stupid enough to go to  a link off the internet to the apple website not knowing if i could been fake. so later on that day the guy replied back with, im going to copy and paste the following :
    Dear Nick,
    Thank you for contacting iTunes Store Support. My name is Noel and I'll be handling your request today.
    I understand that you were not able to purchase in-app items from the game "Clash of Clans" when you clearly have enough store credit. I can certainly feel how important it is for you to have this issue resolved. Don't worry, I will be happy to help you get this matter sorted out.
    Nick, I've checked your account and I can confirm that you do have $50.91 of store credit on account.
    For me to further investigate on the issue, I would like to kindly ask you to reply to this email with a screen shot of the Apple ID that is currently signed in on your iOS device and also the message that you are receiving when trying to purchase in-app items.
    Try these steps to see the Apple ID that is currently on your iOS device:
    1) Verify that you have access to the internet from your iOS device via Wi-Fi or a cellular network.
    2) Tap the Settings icon on your Home screen.
    3) Scroll down and tap iTunes & App Stores. The Apple ID that you're signed in with will appear.
    To take a screen shot on your iOS device, just follow these steps:
    1) Press and hold the Sleep/Wake button at the top of your device, then quickly press the Home button right afterward while still holding the Sleep/Wake button. Your screen flashes and the picture will be added to your Camera Roll.
    2) To locate the screen shot, tap Photos and then Camera Roll.
    3) Tap on the picture you just took.
    4) Tap and hold your finger on the picture.
    5) When the Copy button appears, take your finger off the picture and tap the Copy button. The screen shot will be copied to your clipboard.
    6) Press the Home button, and then go to Mail and reply to this message.
    7) In your reply, tap and hold until the Paste button appears, and then tap the Paste button.
    8) Send the message.
    Do let me know if there is anything else I can do for you Nick, as I want to ensure that this matter has been resolved. Thank you for being a valued customer of iTunes. You have a good one!
    Sincerely,
    Noel
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    Please Note: I work Monday to Friday 11:00 AM to 8:00 PM CST
    Thank you for allowing me the opportunity to assist you.
    Thats what the email that replied to me... now me being stupid i wasnt thinking and thought this guy was trying to help me out and hope he actually was... now later on yesterday my friend called me saying "hey whats up , why you call me... i said " i didnt call you.. and he said i left him a voicemail about watching *********** which was pretty freaky.. because i never called him or left him a voice mail. So at school i listiend to the voicemail and scared the heck out of me!! then it hit me !! Could it have been that email ??! then i went back to the email and re-read it Steps 1-8  made me think!! omg help thanks , nick.

    You are not being hacked. The link in the email is legitimate.
    Do not panic.

  • HEY NEED SOME HELP I GOT A SANDISK AND IT CAME WITH A 3 MONTH FREE ADOBE PHOTOSHOP CC AND LIGHTROOM

    NEED HELP

    Got there! Instead of typing the link iin directly, I clicked it from the Adobe help page here:
    Redemption Code Help

  • Error 4261 - really need some help from one of you pros!

    I keep getting error 4261 when I try to burn CDs. I was able to do it for awhile just fine and suddently I can't anymore. Each time I try now I get partway through burning and it stops, the disk is ejected, and I get error 4261.
    Here's what I have tried so far with no luck:
    1. Decreased burn speed to 2x, on both iTunes and my CD burner
    2. Turned off my virus scanning software (Live One)
    3. Tried various makes of disks
    4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
    5. Updated to latest version of iTunes (7.3)
    6. Tried going back to version 7.2
    7. Ran diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.2.0.34
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
    Audio CD in drive.
    Found 13 songs on CD, playing time 56:25 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:20:25
    Track 3, start time 09:03:00
    Track 4, start time 12:43:17
    Track 5, start time 16:09:07
    Track 6, start time 20:03:02
    Track 7, start time 24:53:57
    Track 8, start time 29:09:72
    Track 9, start time 33:22:52
    Track 10, start time 38:01:52
    Track 11, start time 42:28:17
    Track 12, start time 47:01:25
    Track 13, start time 52:02:35
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
    Any suggestions???

    There are a few points of interest on your Drivers and downloads page at Dell.
    Dimension 5150/E510 (XP)
    Check to see if the firmware on your HLDS GWA-4164B HH 16X DVD+/-RW is up to date. (That's the drive itunes is identifying as an HL-DT-ST.) at least one of the Dell firmware revisions to that was urgent and related to reading and writing to media.
    Also,
    Check to see if the Chipset drivers for your Intel Chipset are up to date.
    Check to see if your Dell Dimension System BIOS is up to date.
    Check to see if the video adapter driver for your ATI Hyper Memory PCI-Express X16 (DVI/VGA/TV out) Radeon X300 SE is up to date.
    Once you're satisfied you're up to date, do you still get the 4261?

  • Need some help from the InDesign community

    Tired of working with PPT because the client demands it? We're trying to dramatically change how InDesign can help.
    Take our survey so we can better undertand the needs from fellow designers:
    http://www.exectones.com/limesurvey/index.php?sid=48842&lang=en

    What you say, Buko, are you not praying for those special PowerPoint capabilities in InDesign!?
    The low-resolution bitmaps that are converted to lowest-possible quality JPEG by default? The rectangles that automatically appear behind text, and over anything 'behind' it? The now it fits in a box text and now it doesnt while the font didn't change? The ruthless clipping of lowercase 'g's at the bottom of a text frame? The appalling way "drop shadows" and "lighting fx" are blended on backgrounds in glorious 36 dpi? The fully automatic re-formatting if you open, print, save, or even look at a slide? Choosing between the default zero-width lines that disappear entirely in print or their very next step in thickness -- fat slugs of 1 pt thick?
    What ... what is it that bothers you?

  • Need some help from the smart apple users hehe

    Ok so i had to reformat my pc due to having a nasty virus.
    So the thing is that i have some music/photos on my ipod touch 3rd gen 32 gig that i dont want to lose.
    When i login to itunes the only option i see is to import the library to my ipod but that would delete all the files i do not wish to lose.
    How do i export all the contents of my ipod to the library?
    Thanks in advance for all the help.

    Have a look at this post by Zevoneer http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    After you manage to do what you want, don't forget to include your iTunes library in your backup routine http://support.apple.com/kb/HT1751 or http://support.apple.com/kb/HT1382

  • I need some help here. someone please respond with some type of idea.

    okay, here's the deal
    when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
    it wont show my battery life until it's cut off.
    do you have any idea what's going on?
    i'm so uber angry it isn't funny.
    P.S.- I've had this ipod for like, almost a year.

    okay, here's the deal
    when i take the Ipod out of the usb, i cut it on, and
    it's just a constant green light in the front that
    wont go away. it wont play, and wont have any affect
    on the buttons or anything. it's just a steady green
    light.
    it wont show my battery life until it's cut off.
    do you have any idea what's going on?
    i'm so uber angry it isn't funny.
    P.S.- I've had this ipod for like, almost a year.
    See if this helps:
    http://docs.info.apple.com/article.html?artnum=303332

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Maybe you are looking for