HFM and Workspace upgrade with SSL from 931 to 933

Hi,
We have upgraded our HFM and workspace components from 931 to 933.
Webserver:Apache and AppServer : Weblogic 9.1
We already had SSL enable with 931 but some anohter vendor has done it Now after upgrade to 933 we cannot directly use https .Can anybody please let me know how to reconfigure SSL after performing the upgrade?
We have hyp_ssl_pdf but that doesnt give proper clue,what stpes to be followed.
Would be great if somebody can throw light upon the procedure and steps to be followed.
Thanks.

Hi 3017122,
The certificate specified by the "TrustedCAFile" parameter does not contain a valid certificate chain.
Solution:
1. Connect to https://<YourServer>/HyperionFinancialManagement - the secure sign (padlock) should appear on the browser showing that the connection was secure (bottom right for Internet Explorer 6.0).
2. Double click the secure sign and go to the "Certificates Path" tab
3. Make note of the chains
4. Create a new TrustedCAFile with all those chains
see http://e-docs.bea.com/wls/docs92/pdf/secmanage.pdf on page 128 and following
5. Validate it with WebLogic's "java utils.ValidateCertChain" utility
see http://e-docs.bea.com/wls/docs92/pdf/secmanage.pdf on page 149
6. Modify the HYSL-Weblogic.conf parameter TrustedCAFile to point to the new certificate
7. Restart Apache, Planning and Workspace services
Drope me an email and I'll send you doc...
Good Luck,
-David

Similar Messages

  • HFM and Workspace 11.1.2.0 issues with opening Apps and reports via web

    Hi,
    we are running decentralized environment where we have HFM Web and App servers on Windows 2008 Server SP2 and few shared elements like OHS, HSS (Shared Services) and Workspace service from Solaris 10 SPARC (64bit) server.
    The base version is 11.1.2.0 and on Windows we have fixes from 1-9 installed whereas on top of Solaris we have no fixes/patches yet installed.
    When we test workspace from web server desktop connecting to Solaris server it seems traffic is fine as Apps are available and browsing them seems to work normally = Webserver is able to locate Workspace on Solaris, Workspace is able to connect to HFM App server and App server again able to connect HFM App db container.
    When we access to workspace url over web (the traffic according to my understanding should go via OHS to Webserver and then redirect to Solaris server Workspace and then like mentioned above.
    Something gets wrong here as when accessing Workspace url we get non-showing icons, $ characters in messed up menu rows and few error messages like :
    - Invalid or could not find module configuration
    - Required application module hfm.appcontainer is not configured. Please contact your administrator
    - Namespace Communication Error
    Also opening test report via web url workspace gives error:
    Required application module reporting.reportViewer is not configured. Please contact your administrator.
    +
    Namespace Communication Error
    Our experience from previous lower environment was that symptons like described might be caused by wrong service start order. Thus we tried to review this carefully and boot in correct order, but still problems. Also, boot order shouldn't be totally wrong as workspace works when using directly from Web server.
    If any of mentioned symptons rings anyone's bell please reply.
    Something still in firewalls or rather in configuration, OHS maybe?
    At this point we don't yet dream of proper loadbalancing or High availability, but rather get this single web and single app server server + shared elements from Solaris server to work without error messages.
    We do know that release 11.1.2.1 is supposed to fix many things, but we need to get this 11.1.2.0 working in a way or another.
    Thanks for any tips that might arise.
    Br, MK
    Edited by: user9327521 on Nov 30, 2010 4:55 AM

    Were u able to ever resolve this? And how?
    Thanks,
    Sejal

  • Upgraded to TimeCapsule and now issues with AirPrint from iPhone and iPad

    Okay.  I bought a HP 210a air print printer.  It was working great with my Linksys router and my iPad and iPhone worked with it perfectly.  Since that time I have recently bought a new new 2TB Time Capsule and just recently set it up.  The old router is no longer hooked up.  Since switching over to the new router, nothing prints from the iPhone or iPad.  So here are the details and I am hoping I am just missing a step:
    1.  I think it is important to point this part out.  After setting up the new router, and before discovering any of this, I turned on the HP printer.  Upon doing so, the printer informed me a software update was available from HP so I downloaded it and it appeared everything was fine.
    2.  After the update, I tried printing and nothing.  Duh, the printer was still looking for the old router.  I ran the built in HP wireless setup wizard on the printer and it pointed to the new router fine.  I tested the connection using the test feature on the printer, and it printed a report that all was fine and that it was now pointed at the Time Capsule, great signal, etc...
    3.  I went to my iPhone and iPad, made sure they were pointed at the same network as the printer, and once again the printer appeared on each device as an AirPrint printer.  Great I thought, so printed a  test a page from each device.  Both pages printed.  Now here is where it gets weird.
    4.  I tried to print a second document from the iPad and iPhone, nothing.  I tried a picture.  Nothing.  It still shows eveything setup correctly, the HP shows as the AirPrint printer and connected, but no matter what I do, it nothing is printing from either device.  I've tried resetting my network settings on the iPhone and iPad and pointing to the network again, re-running the HP setup Wizard on the printer.  They all show that everything is fine.  The iPhone and iPad connect to the network fine, both show the printer when I go to print.  However, after I hit the "print" button on either device, it shows like the document is being sent but NOTHING happens on the HP.  It is very frustrating. 
    The WiFi is working fine, I can surf, email, etc... so the router is working properly.  So what am I missing?  Could the HP update somehow have caused the problem?  I have to believe that between the update and the new router that somewhere I am missing a step.  Any help is greatly appreciated. 

    If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
    Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
    Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
    Turn the i-devices on.
    Try to print again.
    Let me know if this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Crystal Reports export and print fails with SSL / https but works with http

    Windows 2008 Server, 32-bit (IIS7)
    ASP.NET 2.0
    Ajax 1.0
    Crystal Reports version 10.5.3700.0
    http:  printing works, export works
    https:  printing not working, only export to MS Excel and MS Word work.
    I am able to generate reports using both http and https, and the toolbar icons are all showing.  However, I am unable to print or export properly with SSL.
    Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
    A communication error occured.  Printing will be stopped.
    Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
    I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL.  Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7?  Everything works fine when I change the address from https to http.
    Please let me know if I can help by providing further information.  We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
    Thank you.

    Thanks Ludek. I got it by searching KB number.
    Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting.  I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
    1: Crystal report export
                Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
                Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
                Export to PDF : nothing happened.
    2: Print:
                Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
    Please advise.
    Thank you very much!

  • Is it possible to retrieve word documents from my imac after upgrading with yosemite from a 10.8 to a 10.10?

    I have just upgraded my iMac from a 10.8 to a 10.10 with OS X Yosemite and have lost Microsoft Word.  Is there any way to retrieve my lost documents and what is a replacement for the microsoft word program?  When I try to open a word document  a notice comes up informing me 'you can't open the app "Microsoft Word" because PowerPC apps are no longer supported'.  Are there any options here?  Appreciate any info.

    LibreOffice
    OpenOffice
    Office Alternatives - Free

  • Epm Inplace upgradation with SSL enabled

    Hello Experts,
    We have plan to inplace upgradation of  hyperion product 933 to EPM 122 with SSL enabled.
    My questions regarding to this concerns are:-
    1)Is it possible to make inplace upgradation 933 to 122 with SSL enabled?
    2)What will be the risks for this plan
    3)And suggest pros and cons for this
    Please reply my questions soon.. and suggest me what will be better,Suggest ideas for this.
    Thanks in advance,

    980137 wrote:
    Please reply my questions soon.. and suggest me what will be better,Suggest ideas for this.
    I think you should discuss your upgrade options with a consultant instead of trying to get answers to those sort of questions on a forum.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hi there, i want to buy a registered version of PS CS4 (and an Upgrade to CS6)from a private Person...is there any Possibility to check if the Adobe ID,Licence,User is a real person...or a fake before buying it? Thanks for helping!

    Hi,
    just got an offer from a private Person, who owns a boxed Version of Photoshop CS4 (DVD) and an Upgrade from CS4 to CS6....he told me that he can transfer the current license to me... now there's one important question for me...
    Is there any possibility to check his Adobe-ID (which he already told me) if it's the same adress, name,etc. as he told me...
    or if there is an registered Version of PS CS4 owned by this Adobe-ID?
    Just like to check if he's a real person or a fake...don't want to buy any stolen or illegal software...or beeing punked after paying the money...
    Thank you very much for helping me! :-)
    Chriss

    Old versions of Photoshop are not marketed by Adobe. Only CS5 can be upgraded to CS6.  There are many scams on the web if you find a cheap copy of Photoshop out there its most likely a scam... Be careful.....

  • Present a dialog screen to the user that always stays open and gets updated with values from teststand.

    Hello,
    I'm new to TestStand and just created my first sequences with TS and LV.
    The program is running fine but now I need to implemented a dialog screen with some progress results for the user.
    This dialog screen must stay open (unless closed by the user) and gets refreshed with the latest analysis results from TestStand.
    Is there an example of something like that. (starting from a working example is always easier)
    So I need a mechanism to give some results from TestStand to a custom made dialog screen in LabVIEW.
    Any thoughts/examples/recommandations ???
    Thanks!

    Hi noxus,
    The basic design you are looking for is a daemon, This is basically a VI that runs in the background (your dialog VI for example). This VI is launched dynamicly when needed. And there should be a way of detecting if the deamon is running.
    You can use various ways of communicating between VI's. The two most use full I find either Queues or TCP. The added bonus for TCP is that it also works over the Network, but could also be slower and blocked by Firewalls. Queues only work within the LabVIEW Process running on the Local machine and provide a nice way of detecting if the daemon VI is running.
    Attached a example that show how you can implement something like this. The 'sent new value.vi' obtains a queue reference, we check if it has created a new queue or if it returned an existing queue reference. If the obtain queue created a new queue this means the daemon is not running and we launch the deamon.vi.
    The daemon also connects to the same queue and maintains the reference. If the deamon is closed the referenced is closed as well and the queue is destroyed.
    You can run the example VI. (in LabVIEW 8.2).
    Hope this helps.
    Thanks
    Karsten 
    Attachments:
    Daemon.zip ‏35 KB

  • ETL with OWB and Workspace Manager with Analytic Workspace Manager?

    I already created my dimensions and cubes with "warehouse builder", as a tables, so can I map them in the dimensions and cubes defined with "analytic workspace manager?
    please somone help, becasue I can't found this information on a manual "OLAP application's developers guide".
    also, whichis the manual that I have to follow to create things in AWM? i think is this that I use "OLAP application's developers guide"
    Someone can tell me something?
    Thanks.

    Hi,
    I.m using OWB 10.1.0.4.0 and choosing "Project" then "Metadata Export" and finally "Bridge" I can lanch a wizard that allow me to choose between 3 kind of export.
    If you choose OLAP the wizard will ask you which collection of metadata to export and other options, after succesfully running this wizard (which is not so easy) you can open the AWM and see the export of your dimesion and cube iside an AW.
    I'm finding lots of problems using this feature due to the limited options I can set to the cube and the dimension (type of aggregations, calculated measures, limit on the number of measures in the cube, etc.).
    Waiting for the new OWB Paris if you can post your experience it will be very appreciated.
    Good luck,
    Franco

  • Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

    Hi,
    "Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
    You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
    on TechNet. 
    I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
    Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
    I have SQL Server 2012 STD and Report Builder 3.0  and want to train non-technical users to create reports as per their need without asking to IT department.
    Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
    So how they can configure parameters based on Other data sets?
    Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
    a set of defined reports?
    I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
    So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know. 
    Many thanks and Kind Regards,
    For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

    Hi Asam,
    If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
    query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
    http://msdn.microsoft.com/en-us/library/dd220464.aspx
    As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
    http://technet.microsoft.com/en-us/library/hh965699.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Using iPlanet Web Server 6.0 (with ASP or JSP), is it possible to create a StarOffice, Word or Acrobat document using a template and merging it with data from a database (say Oracle)?

     

    Hi,
    It is possible, But it has to be done through codes and iPlanet Web Server has nothing to do with it. But if you want to create the word document by ASP you have to install ASP plugin like ChilliASP (from Chilisoft) with iPlanet Web Server.Merging with database can be done through your code.
    To know more abt creating word doc through ASP try this link
    http://web.ukonline.co.uk/vance/code/aspworddoc.pdf
    Regards,
    T.Raghulan.

  • Oc4j standalone 10.1.3.3 and service registry with ssl install help needed

    Hello,
    I'm trying to install service registry with oc4j standalone for testing and demoing but am having some difficulty with the ssl side of things.
    I have setup a oc4j standalone 10.1.3.3 and configured the following ports:
    default http port: 9991
    ormi port: 9992
    ormi ssl port: 9993
    https port: 9994
    I have configured oc4j standalone for SSl as per instructions by copying default-web-site.xml to secure-web-site.xml and added secure="true" to <web-site> tag and added <ssl-config keystore..../> as well. I've also modified server .xml and added <web-site path="./secure-web-site.xml" /> into the file.
    I have then installed service registry as a publication (discovery) with http port pointing to 9991 and ssl enabled pointing to 9994 with oracle database.
    I can load http://localhost:9991/ and also https://localhost:9994 and both secure and non-secure page loads fine for the oc4j webpage. I can load http://localhost:9991/registry/uddi/web/ page but when I click on any of the link on it tries to load https://localhost:9994/registry/uddi/web i get a http 404 not found error.
    Tried googling and searching the forum for info, but I'm in need of a little help on where I went wrong.
    Thanks

    Hy frank, thanks for your reply:
    We use a jdk shipped with jdeveloper for running OC4J;
    "<JDev install dir>\jdk\bin\java.exe"
    java -version says:
    java version "1.5.0_06"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
    Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)
    Regards.
    Davide

  • Sending an username and a password with SSL but without Authentication

    Hi,
    I've read several threads about this topic but I'm still confused. I need to send a login and a password in a more or less secure way (not sending it in the get/post and not using a base64 encoding), but I don't want authentication, just to send the info from the browser to the server without everyone in a firewall/proxy being able to read it. I don't want the popup window annoying the user. Buying a certificate from a certification entity would be the last option.
    Could anyone confirm that is impossible to do without including the authentication?
    Thanks in advance,
    - Juan

    HTTP Authentication works via a glorified GET anyway.
    You can only (generally) send stuff via GET or POST.
    SSL encryption takes place outside (or around) the request and response of HTTP, so using an https URL to a server that supports it will make sure that the data in the request including the name & password are encrypted.
    I don't want the popup window annoying the user. Not that you need a popup... a simple form would do, but you need to get the username from the user somehow. You can't get it from the browser otherwise.
    A certificate is not normally needed on the client side, but it is needed on the server.

  • Migrating Crystal and Webi Reports with Universe from 1 folder to different folders

    Hi There
    Does anybody know of a way to do the following
    this is for BOE XI 3.1 SP 6 FP 6.2 on Windows 2008 R2
    We have multiple Crystal and Webi reports developed from 1 universe and we need to copy these Crystal and Webi  reports to different folders in the same CMS  for example
    Universe Dev > Universe Folder Dev -  Crystal and Webi Reports set in Dev Folder
    Create a copy of the Dev Universe to Universe Folder Test – Copy the Dev Crystal and Webi Reports to Folder Test we need to Map it to the universe in the Test Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder UAT– Copy the Dev Crystal and Webi Reports to Folder UAT we need to Map it to the universe in the UAT Universe folder(Copy of the Dev Universe)
    Create a copy of the Dev Universe to Universe Folder PROD – Copy the Dev Crystal and Webi Reports to Folder PROD we need to Map it to the universe in the PROD Universe folder(Copy of the Dev Universe)
    The reason for this is each of these universe are connected to a different database i.e Test, UAT, Prod and we have over 200 reports and at the moment we have to manually map each report to the new universe individual which take up hours.
    I have tried Lifecycle manager but came to the conclusion it cannot achive this
    You cannot change the universe attached to the Crystal and Webi reports
    you cannot promote Reports and Universes in the Same CMS to different folders
    you cannot change the folder even if you promote jobs between servers
    Does anybody know of a way to do this

    Hi,
    The way you should do this is to have 4 different BO systems, Dev, Test, UAT and Prod.
    Having this will allow you to use the same universe across all systems, but the connection to the database will be different on each system.
    Not only will this allow you to smoothly report off different data sources, but you will also be able to upgrade and make configuration changes without impacting your production system.
    Cheers,
    Josh

  • Safe libpng and libtiff upgrade with non-standard Cairo

    I have the whole pack of Ubuntu's LCD rendering patches installed on my system. As the recent news post http://www.archlinux.org/news/libpnglib … m-testing/ says I have to "check the unofficial packages (especially the cairo-* packages from AUR) for required rebuilds". Do I have just to reinstall all these before or after the upgrade (I hope all my settings will be preserved?) or is it better just do not upgrade for a while?

    When using pacman -R package, config files are stored, just the package itself is removed.
    You'll install the new libpng/libtiff and AFTERWARDS you'll rebuild those packages, who need an upgrade.
    Upgrading the libs later won't change anything about this.
    [If you run into errors of packages relying on the older libpng14 (like AWN does), there is still the possibility to copy the new libpng15 to libpng14...though this is just a workaround and not to be recommended]
    Last edited by desm0tes (2012-02-06 12:16:15)

Maybe you are looking for