HFS driver Stop working suddenly (Paragon on Bootcamp)

Hello guys, I defragment my Bootcamp partition using Disk Fragmenter in windows Bootcamp. All was good at that time, My Paragon HFS for Windows v10.0 was working perfectly. But as soon as I restart my macbook and Boot to Bootcamp, Windows ask me to format the MAC OS X partition before use. I thought there may be some problem with that parttion so I connected my External Seagate 1 TB (900 GB NTFS and 100GB HFS for Time Machine) And again It shows same format notice for the 100GB HFS partition of my external. I restart and Boot to MAC OS X, there Everything is fine. I use Repair Disk option for all my disks using Disk utility but there was no problem at all.I understood that there must be problem with HFS driver installed in windows. So, I uninstall it restart and I can see my HFS partition but at read only mode.I download the 10.2 version from Paragon Site and enter serial and I restart it again same problem appears. I do not get this point How suddenly it stops working in Bootcamp?
Although Paragon NTFS for windows which I installed in MAC OS X is working fine.
Please help me out.

Hello again Capri302,
It is good to hear from you again!
Since you have attempted all of the documents posted above with no success, I will need to ask you a few questions in regards to changing the power settings on your system:
Were you able to run programs (like a video game) using the "run as administrator" in the past?
Does the powercfg process work if you log into a different user account?
Have you tried using a different HDMI, or DVI cable to your monitor?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?

    Hello,
    My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?
    Its seems to be the harware.

    Hello raphaelitajuba,
    The article linked below provides information regarding this indicator and steps that can help restore functionality to your MacBook Pro's Wi-Fi.
    AirPort has detected a problem with the driver or a necessary sub-system component, apply the latest manual AirPort software update or reinstall Mac OS X. If reinstalling Mac OS X does not correct the problem, take your computer to an authorized Apple service center.
    The AirPort status menu (AirPort Menu Extra) FAQ
    http://support.apple.com/kb/HT3821
    Cheers,
    Allen

  • NB520 - Wifi stopped working suddenly on its own

    Hi,
    I bought my NB520 in Singapore.
    The WIFI was working properly for almost 3 years until recently I have this strange problem.
    It stopped working suddenly on its own last June for almost 2 weeks.
    Just when I was about to send it to the repair centre, it came back on again.
    But the WIFI comes on and off for a few more weeks before it stabalised.
    It works ok ever since, until 3 days ago it went off again like the last time.
    Usually, when I switch on the netbook, the WIFI indicator (red light) will come on within seconds.
    To use Bluetooth, I just right click on the Bluetooth icon and press "Enable Bluetooth Function" and Bluetooth will turn on.
    But now when I do that, it tells me to "Plug in Bluetooth device".
    Is this a hardware or software problem ?
    I spoke with a local technician but she is unsure too.
    Would appreciate if you can help me with this problem. Thanks in advance.
    Regards,
    Fionna

    > Is this a hardware or software problem ?
    This can be answered very easily recovering the notebook back to factory settings.
    But I guess this is not an option for you at this time. Isnt it?
    However, the issue you are talking in your post looks like the WLan isnt enabled and chosen properly.
    Usually you can use the FN + F8 key combination to enable and disable the WLan and BT module.
    Pressing both keys would switch between WLan and BT as well as disable and enable the modules.
    Did you test this in the past?
    In case the FN + F8 would not work as it should, I would recommend you to download the Wlan driver from Toshiba page released for this notebook series and to reinstall the Wlan driver.
    Your feedback would be greatly appreciated.

  • Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this

    hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it

     
    Hi Jimmy_N, 
    Thank you for considering Sony Community! 
    We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue: 
    Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.  
    Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit. 
    Update drivers from Sony's support website or from where you purchased the laptop. 
    Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope these help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • CD drive stopped working on my Satellite L

    Hi
    MY CD drive stopped working, but then it recognised a disc which I had inserted, but then stopped working again.
    I have deleted upper and low filters from device manager.
    I have also downloaded the dvd ram driver from toshiba and my cd drive then worked, but after I closed down the computer, again it would not recognise discs in the drive.
    I again downloaded the driver and it then recognised the disc I inserted into the drive.
    However, now my computer will not recognise the drive even when I again download the driver.
    Does anyone know why it would work intermittently or have any ideas that might help.
    Thanks.

    Which satellite L do you have?
    Which operating system do you use?
    Do you use original Toshiba recovery image?
    Is ODD recognized properly in device manager?
    Which disc do you use?
    Do you have this problem using only this one disc?
    Sorry buddy but your description is so general and there is no one single relevant info that can help for better understanding.
    What you can expect are just general answers like:
    -reinstall ODD
    -test with different discs
    -defect ODD

  • Intel wired ethernet driver stops working

    We have this issue with several T400 and T500 series ThinkPads that the Intel ethernet driver stops working after a while. All this started to happen maybe a month ago. We have both 32- and 64-bit Windows 7 OSs.
    Wired ethernet works ok first, but after a few hours or a day or two this yellow exclamation mark appears on the network icon and it says limited or no connectivity. Wired network stops working and there is nothing we can do to fix this other than reboot the computer. It doesn't even shut down properly, just says "Shutting down" forever and blinks the HDD led maybe once a second. So we have to force it and after booting everything is ok until the next time this happens.
    When the network stops working, nothing can be done with the driver because everything just hangs. You cannot disable the connection or uninstall the adapter from Device Manager or anything. Unplugging the ethernet cable does not help either. There is nothing about this problem in the Event log other than about the symptoms of not having a network connection.
    What could be the source of this problem? Do you have any ideas about how to diagnose this problem further? We have the newest driver and I have also tried the newest driver from Intel.

    Go to Local Area Connection (Wired Intel adapter), Properties and the Configure button, in the Power Management Tab UNCHECK "Allow the Computer to turn off this device to save power".
    Window7 does NOT always resolve IP and DHCP when it come out of sleep etc. All attempt to release/renew are in vain. I have seen this on various systems for some time. Occassionally a router reboot fixes it but most of the time is the PC. Frustrating but for Wired use this should always be disabled if you're using it a lot. Power savings is not in your best interest.
    Let me know if that does it.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • ITunes8 -- all optical drives stopped working

    After installing iTunes 8, all my optical drives stopped working. Windows simply didn't recognize them. Device manager said they were missing. However the BIOS found them. Uninstalling iTunes8 fixed it.
    However, like everyone else here, now I can't return to a previous version of iTunes because it refuses to recognize my library file (a .itl file).
    Argg
    What can I do, to either use an older version of iTunes, or fix this problem?

    I tried the suggested fix on Apple's site (http://support.apple.com/kb/TS2372?viewlocale=en_US) but both my DVD drives remained invisible.
    Then I tried the one at MS suggested by Adrian Kingsley-Hughes on his ZDNet blog (http://blogs.zdnet.com/hardware/?p=2600):
    http://support.microsoft.com/kb/314060
    Hooray! It worked! Not only have my drives reappeared, but I am burning a DVD right now using InfraRecorder.
    Unfortunately, now I get a nasty message about missing registry data whenever I start iTunes, but I assume Apple will fix this problem in some future release. I'll have to live with it until then.
    I spent hours on this today and almost ordered some new SATA drives, thinking the IDE controller on my mobo must have gone bad. I really appreciate the existence of Adrian's blog and other third party resources!
    And I am very annoyed at Apple right now. Releasing software that breaks peoples' computers in a major way is not acceptable, IMHO. Leaving the bad software out there and posting fixes that don't work is even worse.
    BTW, I am running XP Pro SP2. I have Logitech hardware and software installed, as well as a number of other USB devices (Treo, Canon printer and scanner, iPod) so (according to Adrian and other sources) I guess I was a likely victim.
    Note that, having been burned before by new major releases of iTunes, I was cautious: I held off on installing iTunes 8 until the second release, hoping they'd have fixed any really bad bugs that showed up in the first release by then.
    Silly me.

  • My macbook hard drive stopped working and I loaded another hard drive and can access time capsule but it doesn't show any of my old files and I don't understand why

    My 7 year old macbook hard drive stopped working and I put in another hard drive but when I went to restore my information from airport time capsule it only shows today and nothing older.  Help?

    Did you do a TM backup after you installed the disk? It may write over the previous backup.. but it should actually start a new one.
    Read the info about using migration.. see http://pondini.org/TM/Home.html
    Or the Mac is probably looking at the backup as from a different computer.
    See the details of how to use TM to restore to a different Mac.
    Q17 here. http://pondini.org/TM/FAQ.html
    I would read through 14-17 carefully.
    You should be able to do a full recovery of the TM backup to a USB drive plugged into the computer.

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • When using lighting effects in cc programme freezes and then window comes up sayind amd driver stopped working but is now ok. Tried to open lighting effects in cs6  and default spotlight is there but then it freezes. No mention of driver problems. Any  s6

    Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.

    That is  very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
    Tested video cards for Photoshop CC and CC 2014
    Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
    Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
    Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
    nVidia GeForce: 400, 500, 600, 700 series
    nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
    nVidia GRID K1, K2
    AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
    AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
    AMD/ATI FireGL: W5000, W7000, W8000
    Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
    Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.

  • Radeon display driver stopped working

    Hi
    I am running Win 8.1 x64 (up-to-date) on HP Pavillion 1322TX laptop. There are  Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012. What the hell!
    Can I update these two drivers seperately by getting updates from Intel and AMD sites? 
    Is there any update for catalyst control system (CCC) ? 
    When I try to update through the CCC or HP Support Assist, it is always no updates.
    Can any one please advise me?
    PS. I am fed up with HP and ATM, I wont go for HP again and never recommend for someone elese.
    This question was solved.
    View Solution.

    Hi JSHLMS,
    I see that you have some questions regarding the your switchable graphics. You will not want to use the drivers available from Intel and AMD because with switchable graphics it is the manufacturer of the notebook that configures the drivers. Intel and AMD provide a basic driver and HP configures for their notebooks. You can download the latest AMD software package which includes CCC here.  I did some research and found Windows 8.1 versions of your drivers but as your model doesn't have specific drivers I can't guarantee that they will work.  If these drivers don't work then I recommend downgrading back to Windows 8.
    Intel High Definition Graphics Driver
    AMD High Definition Graphics Driver
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Macbook pro optical drive stopped working after installation of mavericks

    macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

    I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

  • Deploying Stop Working Suddenly

    hi,
    i have MDT 2013 with 4 Deployment shares, one of the deployment shares stop working suddenly "windows 7 deployment share" . when i start the network boot i can see a list of boot image but when i choose that image it gives me the windows loading
    screen for ever and not start the deployment process. other boot images is working fine
    can anyone help me to solve this problem
    thanks 
    Sameh Ismail System Administrator

    @Keith:
    Why are you always proposing your 'further questions' as answers? That's not adequate in any way!
    Especially as a 'Moderator' you should know better, I really dislike this and I am quite sure that I am not on my own with this opinion.
    http://social.technet.microsoft.com/wiki/contents/articles/4865.whether-or-not-you-should-self-propose-an-answer-in-an-msdn-or-technet-forum.aspx
    It is pretty obvious from the post that this happens while loading WinPE, what is there to misinterpret?
    Are you using different WDS servers for your sites?
    If yes, try to remove the boot image from the 'Broken' one and re-import it.
    Comparing checksums is never a bad idea in such a scenario.

Maybe you are looking for