Hi all, as part of my job i need to educate the end users about BW..

Hi All,
As a part of my job i need to educate the End users about the BW. So, for that purpose i need prepare on fine doucment which is easy to understand by end user community. Any documents about this will help a lot.
Could you pls send to this mail id [email protected]
Points will be awarded for this..
thanks in advacne..
Thanks & Regards,
Suresh..

Hi
I dont know what everyone is sending, but there is No standard BW end user manual. Every company / project has different requirements and the queries and reports generated contain different data. Its best to use one of the templates available in WIKI. A simple document for end users should contain screenshots of the query/application and steps taken in order to access the query. If you have sharepoint or some other shared directory you can also add screencam videos training users how to use the BW system. This has always been a good way to teach end users.
Hope this helps.
Thanks

Similar Messages

  • I did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    You downloaded Adobe... what? Adobe has tons of applications.
    Which Adobe product did you download?
    Clinton

  • I tried to download a form from my doctor's office and got a message that I had to install adobe reader, accept the end-user agreement agreement, quit and relaunch. I did all that to my best understanding of those words but still saw nothing but the same

    I tried to download a form from my doctor's office and got a message that I had to install adobe reader, accept the end-user agreement, quit and relaunch. I did all that, to my understanding of those words which could be wrong, but still have the same message. Please help.

    The key word is "launch", the Apple word for "run an app". You must run an app from Applications

  • HT1751 This was extremely helpful, however, all the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?

    All the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?
    My original library exists on my old computer, so I could still transfer it.   Any suggestions are welcome and appreciated - thank you!

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Cron job help- Need to run the Autobuddy command every night...

    I have not written anything in the form of a Unix script for YEARS and YEARS. Our XServe was built in Advanced mode, currently running 10.5.4 Server. On this box, we are running Wiki and iChat. Since we built this box as an Advanced box the "Autobuddy" option was not available.
    I have since enabled it at the command line, but I am told by Apple that there still needs to be a command run after every time a user logs in if you want others to Autobuddy. That command is this:
    "sudo /usr/bin/jabber_autobuddy -m"
    Now I think this would be pretty easy to setup as an automatic cron script, but like I said, I have not written something like this in forever. Not to mention, I am not 100% sure what needs to happen since running the script with an sudo command will prompt for the root password.
    I was wondering if anyone would be able to help me write the script up, and give me some instructions on how to install it. I just want it run everyday, midnight is fine, I don't really care. All I know is that we have a dept of 150 people, and it grows and shrinks all the time. They can deal with a new user not being seen for 24-48 hours, I just want to get this automated.
    Any helps would be GREATLY appreciated!
    Thanks
    Tom

    If you want to keep it simple try [CronniX|http://www.abstracture.de/projects-en/cronnix] a graphical tool for setting up CRON jobs on OSX. Whilst I have not actually done an autobuuddy in this way, I cannot see any reason why it will not run as a Cron Job.
    The proper way ideally would be to use the launchd service.
    Something like this should work:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>org.jabber.dailyautobuddy</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/bin/jabber_autobuddy</string>
    <string>-m</string>
    </array>
    <key>LowPriorityIO</key>
    <true/>
    <key><UserName></key>
    <string>admin</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>0</integer>
    <key>Minute</key>
    <integer>05</integer>
    </dict>
    </dict>
    </plist>
    (not sure why, but tabs are not showing up, making this hard to read)
    Message was edited by: Tim Harris

  • HELP! Without any prompting for such a download, Firefox tells me 'Thank You for choosing Firefox 4', & I have lost ALL of my bookmarks! I absolutely need to restore them, please please help. Not impressed at all!

    I am shellshocked.... so far I am not happy with Firefox's latest effort. When I first got this version, my 'saved tabs' function did not work, which I use regularly, and I lost vital site information with the update. I figured out how to fix this by changing a setting, and figured my problems were over.
    But NOW without any prompting from me, Firefox re-opened, having lost the tabs I had, yet again, and instead opened up two new tabs, 'Welcome to FireFox' (ty for choosing firefox4), and 'Mozilla Firefox Start Page', AND I have lost all my bookmarks!, WTF! Please help me to restore them, I have tried the help info provided, but they are still not restored :( Some of those treasured bookmarks, an extensive list, I will never get again, unless I can restore the ones I had. :( NOT IMPRESSED AT ALL.

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • Need to provide Delegation part to End Users

    Need to provide set delegation part to end users. So, we have provided link to delegateWorkItems.jsp to end users. By that way, the end user can open the builtIn form “End User Delegate WorkItems”, How ever, the user is not able to get users to delegate by searching lighthouse users.
    And if the user has any capability, then the user is getting users to set delegating from end user page. But I don’t want to give any capabilities to users.
    I have done the following things in my system, But got failure result
    Have written rule to get AllMatchUsers in Separate rule library.
    <Rule name='getAllMatchUsers'>
    <RuleArgument name='userAccountId'/>
    <RunAsUser>
    <ObjectRef type='User' id='#ID#Configurator' name='Configurator'/>
    </RunAsUser>
    <invoke name='getUsers' class='com.waveset.ui.FormUtil'>
    <select>
    <ref>context</ref>
    <ref>:display.session</ref>
    <invoke name='getLighthouseContext'>
    <ref>WF_CONTEXT</ref>
    </invoke>
    </select>
    <map>
    <s>conditions</s>
    <list>
    <new class='com.waveset.object.AttributeCondition'>
    <s>name</s>
    <s>startsWith</s>
    <ref>userAccountId</ref>
    </new>
    </list>
    </map>
    </invoke>
    </Rule>
    And have called this rule in “Administrator Library” (BuiltIn Lib) at t”oUsers” Field as Value.
    Please suggest me.

    Hi,
    <call name="LIB_Rules:getAllMatchUsers">
    <map>
    <s>userAccountId'</s>
    <s>emp001</s>
    </map>
    </call>
    I have used the above code to call rule, then it has not worked.
    But by the below code its working fine. How ever, I don't know the reason (IdmVersion is 7.1).
    <rule name='LIB_Rules:LEX_RUL_getAllMatchUsers'>
    <argument name='userAccountId' value='emp001'/>
    </rule>
    Thanks,
    Ravi.

  • How to disable end user personalisation for all webdynpro application.

    Dear Experts,
    I have a requirement where I have to disable the end user personalization of each and every
    webdynpro application in my server.
    I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
    Request you to please suggest.
    Warm Regards,
    Upendra Agrawal

    Hi,
    As per SAP help,
    Customizing: User-Independent, Client-Wide Modifications
    While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
    Double-click the name of the application in the object list.
    In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose  Test  Execute in Admin Mode .
    The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
    Note
    All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
    End of the note.
    You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
    Note
    Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
    End of the note.
    These modifications are valid for all users but take place in the current client only.
    Thanks,
    Chandra

  • Will all five 564XL cartridges fit into a Photosmart 7510 at the same time?

    I have a Photosmart 7510 e-All-in-One, model C311a, and I need to replace the ink cartridges.  The current black ink cartridge is a 564XL, but the other four are regular 564.  I'm thinking of getting the XL size for all five, but will they all fit at the same time?  (It doesn't look like there's any room to spare in the photo and color slots.)  Thanks.

    The XL versions of the color and photo cartridges are the same physical size as the standard cartridges, they just have more ink.  The XL cartridges will fit in your Photosmart 7510 printer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Physical inventory document - for all A parts

    Hi,
        We are in the process of preparing our system for physical inventory count for all A parts (Cycle count indicator is A).
    1. We ran MI24 to get all open physical inventory documents.(they are around 100).
    2.Then we ran MI31 (didn't create batch input) for all A parts and the following are checked - 1. Material marked for deletion 2. only materials w/o zero stock 3. Unrestrcited use 4. Blocked 4. Include inventoried materials 5. Included inventoried batches. The variant for MI31 includes all A parts in the material selection and the required plant and SL are input. The output said, phy inventory documents could be created for 656 materials.
    3. I wrote a query with MARC and MARD to get all A parts with unrestricted quantity > 0 for the above specified plant and SL. The list produced 882.
    The above two counts are not matching.
    I ran MI31 for some of the materials which are in the list materials as per point 3 but not in the above 2. But MI31 said, no physical inventory document can be created.
    We want to make sure both the both numbers are equal (step 1 + 2 = step 3),  to make  sure all A parts will be counted. Can anyone explain why they are not matching? or Am I missing something?
    OR any other ways to make sure all A parts will be counted. Thanks,
    Regards,
    Sundar.

    Please refer my comment. It may be useful for you.
    There are two ways if you want to carry out Physical Inventory count
    1)Manual -
    First check if there are no open PI document for a material using MI31.
    Then carry out three transactions one after another MI01, MI04, MI07
    2) Automatic
    Maintain CC physical inv. indicator in material master i.e A, B, C
    Before that ensure that you have maintained SPRO setting for A, B and C.
    Ok Now check the planned count date in MARC table. Run a Z program to change the last count date
    Now run MICN and schedule a job to create PI documents

  • Using up all discontinued parts stock

    Hi all,
    How can i use up all discontinued parts stock before follow up material has been valid by using engineering change management when the change comes into effect on valid to date?
    thanks

    discontinued parts

  • Report to be sent to a list of recipients in an e:mail (part of batch job)

    Hi,
    I need to generate a report using ALV functionality.
    Currently my report requirement is to sent to a list of recipients in an e:mail (part of the batch job set-up) and the recipients just download the report in a spreadsheet format. 
    Could you please give me the suggestions the way which I need to follow and how I will be able to set this report as a part of batch job which will send the report details to the users in the form of Email.
    Points will be rewarded for the answers.
    Regards,
    Ravi Ganji

    Hi,
    IN SM36..You will see a button for "Spool list recipient" which is next to the target server button..
    press that button..
    Give the email address in the recipient field..
    GIve the steps and start condition and then release the job..
    THanks,
    Naren

  • Feature Request: Export and Import all or part of vCenter configuration from the GUI

    One of the challenges we face is how to recover a large vCenter to a different VM, without having to restore any databases or use vCenter VMs and databases on replicated storage. We currently have a PowerCLI based process for exporting vCenter configurations - vCenter settings, roles/privs, alarm definitions, datacenters/clusters/hosts - to an XML file, which can then be used to import that vCenter configuration into a recovery vCenter. Three part process - export the vCenter configuration, import the settings and structure (datacenters, clusters, alarms), then import the hosts. This last step pulls in the hosts once by one from the original vCenter, complete with their running VMs and once all hosts in a cluster are imported creates the required Resource Pools and moves the VMs in to them. A subsequent script moves all the VMs into appropriate blue folders based on their CMDB classification/OS.
    The above process is OK, but has a number of faults:
    It's all or nothing for a migration, unless there is some serious editing of the XML dump to extract, for example, a specific datacenter or cluster, which could if incorrectly done result in configuration issues, hosts not being imported, etc.
    It can't (at least not in vc4.x) migrate dvSwitches. If we have those in a datacenter, we're going to have to reconfigure the hosts and VMs back onto conventional vSwitches
    We'd really like to see a native tool built in to vSphere Client or the Web Client that will allow all or part of a vCenter configuration to be exported to an XML or other flat file and then imported into another vCenter in one easy step, taking running VMs, dvSwitches - the lot. In the same way you can export host and vCenter logs with a few clicks, it should be possible to do something similar for vCenter configurations. This would be useful for a number of things - vCenter recovery, vCenter upgrade, individual datacenter or cluster migration.

    I got the answer: http://forum.java.sun.com/thread.jspa?threadID=577129

  • Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    A couple of months ago, I went to the Apple Store to try and sort this problem out. I was told that I was not playing my songs out of an actual music library. I created a library and loaded all of my songs, movies, etc. onto it. I had found that when I synced my songs from the new library onto my itouch, the songs no longer stopped in odd spots or bled into each other. To ensure that most of my songs had been fixed, I played the ones that were the most problematic. Fortunately, the songs play all the way through without any interruption. So far, I have not encountered the same problems that I had posted in my question. I apologize for not knowing the fellow's name who helped me with my iTouch at the Apple Store, but I would like to say how thankful and happy I am now that my iTouch no longer skips to the next song.
    I know that other people have had this same issue with their iPods. If you encounter your music not playing correctly, I would suggest that making a new library and  loading all of your music into the new one may help correct the problem. I hope that this helps.

  • How can I see all scheduled jobs which have steps of a given user?

    Hello,
    I like to see all scheduled jobs which have steps of a given user. It is not importent which user has planned the job, I just want to check the usernames wich are used for accomplishing the respective step (-> field "AUTHCKNAM").
    In table " tbtcp" I can see the AUTHCKNAM for the jobsteps, but these table just contains the jobs which are in the state "finished/completed".
    In table "tbtcs" I can see the scheduled jobs, but there I can't see the AUTHCKNAM
    Do you know a table where I can see ALL Jobs or the scheduled ones and the AUTHCKNAM?
    Thanks for your help!
    Kind Regards
    Lisa

    Hi,
    thanks for your answers.
    I also tried the table "tbtco". There I can see all jobs, but there arent entrys in the column "AUTHCKNAM". Its empty....
    Maybe there is an other table?
    Kind Regards,
    Lisa

Maybe you are looking for