HI Connection failed: SQLState: '08001' SQL Server Error:

Hi all,
my server in workgroup and all client pc in domain is any cooneting issue
Operating server - Window Server 2008
Database - Sql server 2005
SAP - sap 2007B pl 08
but when i connect client to the server i getting error:
Connection failed: SQLState: '08001' SQL Server Error: 17 [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
so please tell me if any setting that will change to established coonetion.
Regards \
Raj

Please check if the named pipes and tcp/ip are enabled in client protocols and protocols for ms-sql server. You can do so by going to sql server configuration manager.
Rahul

Similar Messages

Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!

Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Hybrid Connection fails for Windows SQL Server 2014 - SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted

Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal Morciniec

Same issue here, looking for more information !

MS SQL 2008 R2 Named instance: Login failed. Microsoft SQL server, Error: 18452) - Tryig to access using the FQDN assigned for the backup network card.

Hi,
I have a windows 2008 R2 Enterprise servers with standalone MS-SQL 2008 R2 named instance. The server is having two networks, once production and the second for backup. The server FQDN is resolving to the production IP. The backup NIC
DNS dynamic update is disabled and an "A" record is registered with the dns. While trying to connect to the instance using the management studio:
Successfuly able to connect using the instance name, the production hostname, production IP and backup IP.
but while trying to connect to the insance using the backup hostname getting the below error:
"Login failed. The login is an untrusted domain and cannot be used with windows authentication. (Microsoft SQL server, Error: 18452) "
This is required for the backup tool to get connected using the backup FQDN of the server.
Should I need to create a host name alias, request you to kindly assist me with the best recommedation to fix this.
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspx

Hi,
It might be a kerberos issue. Check that there are valid SPN's registered using the setspn utility - http://technet.microsoft.com/en-us/library/cc731241.aspx
Thanks, Andrew
My blog...

Intermittent Error SQL Server Error 67 and 17

Hi! We are running Windows SQL Server 2012 Standard on Windows Server 2012. There is a SQL Database with an Access Front End which we migrated from older versions of Access and SQL.
The Access front end communicates with the database most of the time without a problem. However, sometimes Access just stops responding and then the user gets the following error:
Connection failed:
SQLState: '01000'
SQL Server Error: 67
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen(Connect()).
Connection Failed:
SQLState: '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access is denied.
The person who maintains the Access and the SQL Databases provided the following summary:
The spontaneous issue affects everyone connected to the SQL Server at the same time, and manifests itself in a slow or non-existent connection. It resolves itself in a few minutes to a few hours. The ODBC trace did not yield any useful information
about the problem. We tested with up to 5 simultaneous users with no problem. When we observed the issue of Friday, only four users were in the database, and closing these connections did not immediately resolve the issue. There appeared
to be no problems with the network for file system access to the server during the down time.
Based on this information, it definitely is not an issue with MS Access, the ODBC configuration, or the database structure. It appears to be an intermittent connectivity issue with SQL Server itself, perhaps due to configuration problems, licensing
(as you mentioned), conflicts with other software/processes, or due to some other SQL Server process. Unfortunately, this is outside of my expertise and we do not have dedicated SQL Server or IT resources.
I had another IT Person look at the issue, he found the following:
Sally's PC was getting SQL error.<o:p></o:p>
Logged into her PC to look at it (logged in as Sally and as cleAdmin)<o:p></o:p>
Looked at server name, want to verify that in the Control Panel > Adminstratrative Tools > ODBC Connections<o:p></o:p>
There was no odbc connections under User DSN, System DSN or Fie DSN<o:p></o:p>
Created new System DSN connection<o:p></o:p>
Specified server: CLE-VM-SQL-FILE\CLESQLSERVER<o:p></o:p>
The rest were default values<o:p></o:p>
Clicked test and it was successful<o:p></o:p>
Unfortunately, the problem started again soon after these changes were made.
It was suggested there could be a hardware issue, so we have replaced the switch and made sure the drivers on the Network Adapters are current. Plus
we have never seen any indication of a loss of network connectivity while testing using a PING Test.
Has anyone else experienced this issue and if so, how did you solve it?
Patricia Kachersky

Bump, Anyone?
Patricia Kachersky

VMware SQL 2008R2 bcp error - SQLState = 08001, NativeError = 0 Error = [Microsoft][SQL Server Client 10.0] Client unable to establish connection due to prelogin failure

Can someone help me resolve this error? Thanks
Windows Server 2008 R2 Standard SP1 64-bit - SQL Server 2008R2 Standard 64-bit
VMware vCenter Server Version 5.1.0
SQLState = 08001, NativeError = 0
Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
bcp program:
bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
The bcp program executes successfully on a local instance of SQL Server.

The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
The message you would see would be similar to
2010-08-18 14:11:30.91 Logon Error: 17809, Severity: 20, State: 3
Possibly followed by a a line that details the message. The error number may be different.
Erland Sommarskog, SQL Server MVP, [email protected]

Error while trying to connect to a remote SQL Server DB using multiconnect

As part of our business process, we need to connect to a SQL Server DB external to SAP.
We have done the following:
1. We set up an ODBC connection on our SAP sandbox server to the external SQL server DB.
Name: sdsdev
Connection string: sdsdev\sqlexpress2008
2. We tested the ODBC connection from within ODBC and it works perfectly
3. Using transaction: DBCO we have set up a DB connection known to SAP that we can use in ABAP to retrieve the data.
    It was set up with exactly the same parameters as with the ODBC.
    We used the following connection string so it would know to use the ODBC DBSL profile parameters, with the DSN name
being the same as defined in the ODBC: See below ...
    DB connection: AR_INTERFACE
    DBMS: MSS
    User Name: ARTransfer
    Password: ******
    Conn info: MSSQL_DSN=sdsdev
4. We also made sure we installed the DBSL dynamic library (DLL) on the R/3 system server.
5. We ran a small test program to test connectivity ... as below ...
     exec sql .
         connect to 'AR_INTERFACE'
     end exec.
     right after the above command we check the system log for status. It failed with the following message:
B Wed Feb 09 14:40:40 2011
B Connect to AR_INTERFACE as ARTransfer with MSSQL_DSN=sdsdev
MSSQL_DBNAME=ARTransfer
C Thread ID:3900
C dbmssslib.dll patch info
C patchlevel 0
C patchno 118
C patchcomment Problems with the use of literals in non-unicode
systems (1524929)
C np:(local) connection used on SAPS101B
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbds#2 @
1056] [dbds 1056 ]
B ***LOG BY0=> <message text not available> [dbds#2 @ 1056] [dbds
1056 ]
The connection failed !
We used all of the information found in OSS Notes we could find.
Has anyone had this problem before ? Is there something obvious we are missing in all this ?
Thank you for your assistance.

Is this Excel or Access? If Excel, try this.
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error trying to install ICM 8.0 - "FAILED TO GET SQL SERVER VERSION."

Hello guys, i tried to install ICM 8.0 but when i click on Setup.exe appears this error:
"FAILED TO GET SQL SERVER VERSION. MAKE SURE SQL SERVER INSTALLED PROPERLLY
NO INSTANCE NAME FOUND.NO SCHEMA UPGRADES ATTEMPTED"
I try to check the SQL COnfiguration, about Named Pipes, but everything is allright. Someone knows what is it?
Thank you very much.

You should be able to see the ICMSetup.log file somewhere - check TEMP. It seems to me that this is the first thing it does - tries to connect to the SQL database and ask for the version. Clearly it cannot. I assume you installed SQL OK, probably have the service running under a domain user created especially for the task, or the domain admin, and you are also logged in as the domain admin, and that SQL is running.
Check that log file for clues.
Regards,
Geoff

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to fix Login failed for user ''. (Microsoft SQL Server, Error: 18456)in windows 2008?

Hi All,
we are facing the Login fails issue .
how to resolve the bellow error , could you please suggested the possible ways .. ASAP
TITLE: Connect to Server
Cannot connect to ..
ADDITIONAL INFORMATION:
Login failed for user ' domain\name'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
BUTTONS:
OK
Log Name: Application
Source: MSSQLSERVER
Date: 10/6/2011 1:56:28 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: domain\name
Computer:
Description:
Login failed for user ' domain\name'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
RAM

I was hitting myself in the head with this problem for a couple of minutes.... Everything was fine on the DC and Domain itself.. I added the Domain admins Group Principal for which I am part of... I was getting this error ... Long History... Short
(Right Click and Run as Administrator took care of this for me..) UAC was the cause of the problem.
Cannot connect to XX-DB-XX3.
===================================
Login failed for user 'XXXXS\XXas'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
Server Name: XX-DB-XX3
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

I am geeting problem whem i run bulk insert query i got error Location:_ bcpimp.cpp:1797 Expression:_ cbOutTemp cbOutputStr SPID:__ 52 Process ID:_ 2364 Msg 3624, Level 20, State 1, Line 3 A system assertion check has failed. Check the SQL Server error

Location: bcpimp.cpp:1797
Expression: cbOutTemp < cbOutputStr
SPID: 52
Process ID: 2364
Msg 3624, Level 20, State 1, Line 3
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.

If you check your sql server error log folder you will see dump files created. You need to send those dump files to Microsoft for inspection because outside of microsoft product support the symbols for reading the dumps are not available without which it
wont be easy to find the issue.
http://support.microsoft.com/kb/2028589
In the meantime check if you are on the latest version of Service Pack and if not apply the latest service pack. Majority of these kind of assertions are bugs which are solved in Service Packs/Cumulative Updates.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error Creating Connection Pool for Microsoft SQL Server

I am trying to create a connection pool that connects to a MS SQl Server but it keeps giving me an error
Unable to create : com.microsoft.sqlserver.jdbc.SQLServerDriver
Missing class: com.microsoft.sqlserver.jdbc.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /D:/jdevstudiobase1013/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in D:\jdevstudiobase1013\j2ee\home\oc4j.jar This load was initiated at system.root:0.0.0 using the Class.forName() method. The missing class is not available from any code-source or loader in the system.
I have added the Microsoft Jar to the D:/jdevstudiobase1013/j2ee/home/lib/ and also to D:/jdevstudiobase1013/j2ee/home/. Please any suggestion would be welcome

I am trying to create a connection pool that connects to a MS SQl Server but it keeps giving me an error
Unable to create : com.microsoft.sqlserver.jdbc.SQLServerDriver
Missing class: com.microsoft.sqlserver.jdbc.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /D:/jdevstudiobase1013/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in D:\jdevstudiobase1013\j2ee\home\oc4j.jar This load was initiated at system.root:0.0.0 using the Class.forName() method. The missing class is not available from any code-source or loader in the system.
I have added the Microsoft Jar to the D:/jdevstudiobase1013/j2ee/home/lib/ and also to D:/jdevstudiobase1013/j2ee/home/. Please any suggestion would be welcome

Can't connect to the database after 1-2 day, Named Pipes Provider, error: 40,Microsoft SQL Server, Error: 121

HI
I have a problem. I can't connect to the database. It said :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 121)
When I restart the server, I can connect normally. But after 1-2 days, it can't be connected.
How can I fix this?

Hi Lee,
Please refer to the following article to configure SQL Server 2005 to allow remote connections:
http://support.microsoft.com/kb/914277/en-us
Regards,
Elvis Long
TechNet Community Support

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview.

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

HI Connection failed: SQLState: '08001' SQL Server Error:

Similar Messages

Maybe you are looking for