Messeges blocking inqueue for some mesg & sucess forsome msg ofsame Interf
Hi All,
The messages are stuck up in queue ,if we check in queue the STATUS is *_connection closed and no data _
The messages are getting blocked in queue(XBTM0000).
Some times the message are successful sometimes it is blocked (it's for same scenario and message types ) .
What could be exact reason to behave in this way?
Regards
Nandan
Nandan...
Login to SMQR and check the status of the schdulet it should be inactive...if it is wait then there are no dialog process to process your request...
when the resources are less (Dialog Work Process, MaxTime, less queues), the Scheduler Status will show 'Wait' state. This is the problem.
Increas queuse, MaxTime, then message processing will little bit faster.
also since your mesage sixze is around 8MB, i think you are execcding the queue limit have you incresed the queue size or it is in default size.
with this parameter EO_MSG_SIZE_LIMIT you can set the queue size to around 10mb and use this as sdedicated queue for the interface, do queue pritirozation....
/people/sunil.ojha5/blog/2008/02/20/rfc-quota-part-3 for details of the queue tuning parameters:
i think the problwm with your message size increase the queue size and queue execution time & try it should work
Similar Messages
-
How to Block Account member in input reporting for some users?
Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio VazquezI would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps. -
Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me
Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me
-
By default, I leave pop-ups blocked in Safari, but, for some sites, I must allow them. How to do this? Is it possible?
Just un-check BLOCK POP-UP WINDOWS and reload the page.
-
User blocked for some reason...can't figure out ho...
user blocked for some reason...can't figure out how to unblock!!! using for business. no support phone to get help!!!
Hi, BHMN..., and welcome to the Community,
Please do contact Skype Customer Service again to follow up; be sure to reference any support ticket number(s) you may have been provided.
Regards,
Elaine
http://community.skype.com/t5/Security-Privacy-Trust-and/How-to-un-block-a-Skype-account/td-p/799404
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
Blocking attachments in Exchnage 2010 for some usres ?
Hi all,
Is it possible to block attachment in Exchange 2010 SP3 for few users not for all email users.Like I want few users to sending and reviving for internally and externally but want to block them for attachment.
Thanks!
VijayHi Vijay,
I recommend you create a transport rule to block the emails that have attachments.
What's more, you can create a distribution group, add the special users to it and then apply the transport rule.
Here is a useful thread for your reference.
Block the attachment in email exchange 2010
http://social.technet.microsoft.com/Forums/exchange/en-US/788ec83e-ab91-4442-aa17-b0654cb51296/block-the-attachment-in-email-exchange-2010?forum=exchangesvradmin
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
About to use my tree for some firewood :o(
I was wondering if someone could maybe clue me into a problem that I am having with my DefaultMutableTree. See, I call a recursive method to get the file system of the computer, which is what is added to the tree. So the user is looking at a tree structure of the file system of their computer. My problem is that when I compile and run my program the tree shows up fine, with no hitches. I have given my code to other friends, and for some of them it does not show up, and throws a null pointer exception at the internal interface of this recursive method. I was wondering what might be causing this? My friends that have problems with the code are running either WIN XP, or Mac OS 10.1.4. Here is the code for the initialization of the tree (This will look ugly on the post, so I would hope that you would take the time to copy and paste this into your editor :D)
//code start.
import java.io.*;
import java.io.File;
import java.lang.*;
import java.util.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.beans.*;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.event.TreeSelectionListener;
import javax.swing.event.TreeSelectionEvent;
import javax.swing.tree.TreeSelectionModel;
public class File_Encryptor extends JFrame {
private JFrame thisFrame = this;
private JTree tree;
private JMenuBar jMenuBar1 = new JMenuBar();
private JMenuItem menuOpen = new JMenuItem("Open");
private JMenuItem menuSave = new JMenuItem("Save");
private JMenuItem menuClose = new JMenuItem("Close");
private JMenuItem menuQuit = new JMenuItem("Quit");
private JMenuItem menuAbout = new JMenuItem("About this software...");
private JMenuItem menuAdd = new JMenuItem("Add key and user");
private JMenuItem menuChange = new JMenuItem("Change buddy key");
private JMenuItem menuSend = new JMenuItem("Send your buddy key");
private JMenuItem menuDelete = new JMenuItem("Delete selected buddy key");
private JMenuItem menuReset = new JMenuItem("Reset your key");
private JMenuItem menuChangeLogin = new JMenuItem("Change Login");
private JMenuItem menuHelp = new JMenuItem("Help...");
private JButton openDir = new JButton("Open path");
private JTextField jTextField1 = new JTextField();
private JScrollPane treeView;
private JScrollPane imageView;
private JScrollPane textView;
private String ROOT;
private File root;
private DefaultMutableTreeNode top;
final private DefaultMutableTreeNode FILLER = new DefaultMutableTreeNode(new FileInfo ("about:blank", "about:blank"));
public File_Encryptor() throws FileNotFoundException, InterruptedException, IOException, ClassNotFoundException {
super("FILE ENCRYPTOR 1.0");
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
ROOT = getRoot(System.getProperty("user.home"));
root = new File(ROOT);
try{
//Create the nodes.
top = unfold(root);
top.setUserObject(new FileInfo(ROOT,ROOT));
tree = new JTree(top);
tree.getSelectionModel().setSelectionMode
(TreeSelectionModel.SINGLE_TREE_SELECTION);
Object nodage = top.getNextNode().getUserObject();
FileInfo leaf = (FileInfo) nodage;
tree.addTreeSelectionListener(new TreeSelectionListener() {
public void valueChanged(TreeSelectionEvent e) {
DefaultMutableTreeNode node = (DefaultMutableTreeNode)
tree.getLastSelectedPathComponent();
if (node == null) return;
try{
Object nodeInfo = node.getUserObject();
FileInfo temp = (FileInfo) nodeInfo;
if((node.isLeaf()) && (!(node.isRoot())))
System.out.println(temp.Path());
//figure out how to place file in editor pane.
else
return;
catch(Exception fubar)
fubar.printStackTrace();
treeView = new JScrollPane(tree);
treeView.setSize(150,450);
jTextField1.setMaximumSize(new Dimension(50, 100));
jTextField1.setText("PATH");
this.getContentPane().add(jTextField1, BorderLayout.EAST);
this.getContentPane().add(treeView, BorderLayout.WEST);
catch(Exception e) {
e.printStackTrace();
jMenuBar1.setBorder(BorderFactory.createEtchedBorder());
JMenu menu = new JMenu("File");
JMenu about = new JMenu("Help");
JMenu keys = new JMenu("Keys");
JMenu change = new JMenu("Login");
menuQuit.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_Q, ActionEvent.META_MASK));
menuQuit.setEnabled(true);
menuQuit.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.exit(0);
menu.add(menuQuit);
jMenuBar1.add(menu);
jMenuBar1.add(keys);
jMenuBar1.add(change);
jMenuBar1.add(about);
this.setJMenuBar(jMenuBar1);
public class FileInfo {
private String path = "";
private String name = "";
public FileInfo(String p , String n){
path = p;
name = n;
public String toString(){
return name;
public String Path(){
return path;
public static String getFileEx(String po){
String ext = "";
int i = po.lastIndexOf('.');
if(i > 0)
ext = po.substring(i-1);
else
ext = null;
return ext;
private DefaultMutableTreeNode unfold(File path) {
DefaultMutableTreeNode node = new DefaultMutableTreeNode("");
Vector Files = new Vector();
Vector Direc = new Vector();
if((path.isDirectory()) && (path.list().length != 0))
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
File [] childs = path.listFiles();
for(int j = 0; j < childs.length; j++)
if(childs[j].isDirectory())
Direc.addElement(childs[j]);
else
Files.addElement(childs[j]);
for(int g = 0; g < Files.size(); g++)
Direc.addElement((File)Files.elementAt(g));
for(int i = 0; i < Direc.size(); i++)
node.add(unfold((File)Direc.elementAt(i)));
else if(!(path.isDirectory()))
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
else
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
node.add(new DefaultMutableTreeNode(new FileInfo(null,"<EMPTY FOLDER>")));
return node;
public static String getRoot(String path)
int find = path.indexOf(System.getProperty("file.separator"));
String root = path.substring(0,find + 1);
return root;
public static void main( String [ ] args )throws FileNotFoundException, InterruptedException, IOException, ClassNotFoundException {
File_Encryptor show = new File_Encryptor();
show.setSize(700, 500);
show.setResizable(false);
//show.setLocation(100,100);
show.setVisible(true);
//code end.
//well there it is. Hope someone can help me with my problem.
//I know this code is ugly, but I was trying a bunch of different
//things hoping something would work. but ehh no such luck.
//I am running windows 98, yea that's prolly my problem.
//thank you for your time.I ran this on XP and got the null pointer exception...
it's likely that it's running into a file or directory that it can't list (in my case it was a mount on a different directory ntfs is kinda cool)... SO... to handle that problem I just put the whole method in a try / catch block
it was just the method unfold ... the fix returns a blank treenode... it should probably return null and the caller should see that as a sign to not add it to the tree...
private DefaultMutableTreeNode unfold(File path) {
DefaultMutableTreeNode node = new DefaultMutableTreeNode("");
try
Vector Files = new Vector();
Vector Direc = new Vector();
if(path==null)
return(node);
if((path.isDirectory()) && (path.list().length != 0))
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
File [] childs = path.listFiles();
for(int j = 0; j < childs.length; j++)
if(childs[j].isDirectory())
Direc.addElement(childs[j]);
else
Files.addElement(childs[j]);
for(int g = 0; g < Files.size(); g++)
Direc.addElement((File)Files.elementAt(g));
for(int i = 0; i < Direc.size(); i++)
node.add(unfold((File)Direc.elementAt(i)));
else if(!(path.isDirectory()))
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
else
node = new DefaultMutableTreeNode(new FileInfo(path.getPath(),path.getName()));
node.add(new DefaultMutableTreeNode(new FileInfo(null,"<EMPTY FOLDER>")));
catch (Exception e)
return node;
} -
I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
I can't access these images except to go into the applications.
Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive. I tried the import first, but there wasn't enough space. Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use.
As it is, I only have 50gb left on my imac, and the aperture library is 150gb. Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
So in short, I need to know how to do the following:
-select photos in finder in aperture/iphoto libraries
-move aperture library to live on external drive
-import iphoto library into aperture library
-eliminate dups but maintain organization
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
-live happily ever after
Thanks in advance for any support you can offer!!If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
-move aperture library to live on external drive
Managed or Referenced Library? Managed -
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit Aperture
2. Copy the Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Referenced - relocate your Masters first.
These issues are covered in the Manual and on this forum hundreds of times.
-import iphoto library into aperture library
FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an iPhoto Library? Or Consolidate them?
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
You can't. Every photo is in a Project. They’re the basic building blocks of the Library.
You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app you've purchased.
The following is written for iPhoto, but about 97% works for Aperture too.
There are many, many ways to access your files in iPhoto/ APerture: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto/ Aperture not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
or use this free utility Karelia iMedia Browser -
Block invoices for PO with no GR-based IV flag
Hello SAP experts,
I need your help with finding a way to block invoices for PO with no GR-based IV flag. At our company, we treat service POs almost the same as material POs (to avoid receipt of service entry). The only difference from material PO is that service PO does not have the flag for GR. We customized our EBP to have this done.
Now, accounting wants to automatically block all invoices associate with service POs. In this case it would be a PO with no GR. I tried LIV configuration but it is only for price, quantity and etc. I also tried blocking with IR before GR but it didn't work because there is no GR.
Is there a way to achive automatic invoice block in this case?
Appreciate your help.
-AT-Hi Annie,
if the configuration doesn't help you enough, you would have to add some custom logic after the invoice has been created.
Technically speaking, I believe there exists a business add-in (BAdI) where you could enter a piece of code which would after the invoice creation check the GR and block it if appropriate. Another implementation option would be a mini-workflow - there you would have a step which checks the GR existence and blocks the invoice.
Hope this helps, I suggest talking to your local abap consultant for more details,
-Mikko -
Hi. Hope this is right forum. First post. A brief background. Years ago (2007-2008) I created a web portfolio for school. First it was in HTML (Dreamweaver) and then Flash. I hadn't really touched it in years and decided this past couple of months, after playing in the medium again, to get back into wed design, 3d, and digital content creation. That said, I went in and updated both the HTML and Flash versions with the knowledge I currently have, limited though it is. I now would like to go forward and build a completely new site and teach myself HTML, JavaScript, and WebGL along the way (possibly before hand). Hopefully I'll get working on the new site before the end of the year. In the mean time, I'm using my old site as a stop-gap measure. I've also taken books out from the library to begin journey into the above mentioned languages.
This all said, I'm looking for some advice on what direction I should go next...look into... Does my current objective seem reasonable? Also, could anyone give feedback on what I did wrong and what I've done right on my old site. I think, as far as what went wrong, the Flash page is just too large. No one wants to wait so long for it to load. I think I got carried away with it. Also, too many sound effects. That said, I think the HTML site was constructed in an "old-fashion" way. No one makes sites like that anymore. I basically set it up in Photoshop, sliced it, and assembled it in Dreamweaver. The end result is a bunch of tables in HTML? A friend suggested I look into a CMS (?) like WordPress?
Here's my current site: http://www.personal.kent.edu/~mstingle/
Constructive feedback on what I did right and wrong would be great. And, where I should be looking next for rebuild of my portfolio.
Cheers.WebGL is still experimental. Most browsers don't fully support it yet.
http://caniuse.com/webgl
The current trend is Responsive Web Design -- layouts that work in all devices (mobile, tablet and desktop). This technology relies on CSS layouts (no tables) with media queries for different viewport widths. Below is a crude example built with the FluidGrid Layouts feature in DW CS6 or CC:
http://alt-web.com/FluidGrid/Fluid2.html -- resize your browser's viewport to see it in action.
Flash is dead on the web now because the world's most popular mobile & tablet devices don't support it. Animations are mostly being built with HTML5, CSS3 and JavaScript. See Adobe Edge Animate.
If you're not a skilled coder and just want a basic static web site, Adobe Muse might be all you need. http://www.adobe.com/products/muse.html That said, Muse cannot support server-side programming so you can't use it for advanced features like CMSs, blogs, etc...
If you're a Creative Cloud member, you can use Behance & ProSite to build & share your portfolio online.
http://www.adobe.com/products/creativecloud/behance-community.html
http://prosite.com/
In terms of your own site, ask yourself how much content & which features it will need to support in the coming months/years. If it's going to be a relatively small site (under 20 pages), a static HTML site is probably all you need. IMO, WordPress -- a dynamic CMS built with PHP & MySql databases -- would be overkill. However, if you plan to make your site into a blog for example, then a dynamic CMS is an option to consider. WordPress isn't the only kid on the block either. There's also Drupal, Joomla!, and many more...
Nancy O. -
Hi
How to set automatic indicator paymants blockade for items created by FB01 for some vendor?
I set on master data in vendor blockade payment yet but what more is need for it?Dear Kosmo,
If you view the F1 help for the field ZSCHF (default value for the
payment blocking key) in OBB8 you will see the following
'When entering postings to a customer or vendor account for which the
terms of payment key displayed has been entered in the master record,
this blocking reason is proposed together with the terms of payment.
If you enter the terms of payment key later in the line item, the
blocking reason originally entered has no effect.'
In other words, if you manually enter the payment terms in a invoice
line item instead of allowing the system to take the terms from
the vendor master, the payment block key and payment method will not
be taken from OBB8.
Another possibility is to create an FI substitution by OBBH.
The answer I gave You before was in case of You need to insert it after the posting.
Mauri -
How to block articlee for purchases
we are planning to block some of articles for purchases. However we want to allow for stock transfers using stock transfer requests( ME21N-UB doc type).
when i kept 01 Blocked for procment/whse in X-site status of baisc data tab system is not allowing for stock transfer order creation also.
plz suggest how to block articles for purchases without impacting for stock transfers.
what is the usage of follwing selections for blocking
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for PurchasingHello,
If you want to block articles from procuring into DCs and do not want to block DC to Store movements, you may block articles in site-specific Block status (MARC-MMSTA) in Article/DC view. So DC to Store STOs can be created.
You may see the definitions of various blocking statuses in transaction OMS4. For example, 01 Blocked for procment/whse means blocked from Purchasing,Forecasting and RP (No Message, Warning or Error Message).
Thanks,
Venu -
I didn't want to see some postings, so I was told to block the pictures on the postings.....after I did that, we now cannot see anyones pictures when they download them on to facebook... it only affects us when on our desk computer not our ipod.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions" (search fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
Why is apple blocking downgrade for iphone 4 and why apple is selling defective apps??????
First thing i cant downgrade from ios4.3.4 to 4.3.3 why? secondly, why do there are defective apps in itunes store? and will my money will be refunded or not? why cant we try products for some hours to make a buying decision? there are thousands of questions unanswered, i just have device with me and apple is remotely controlling it, why are u blocking users freedom?????
First thing i cant downgrade from ios4.3.4 to 4.3.3 why?
Because doing so is not supported - primariy since the iPhone's baseband is often updated or changed with a firmware update. Since 4.3.4 addressed a potential security issue involving the download of a PDF document from a nefarious website, what is the reason for wanting to downgrade to 4.3.3?
secondly, why do there are defective apps in itunes store?
Because Apple doesn't do extensive testing with every single app. Apple primarily checks apps not accessing any private iPhone API's for security reasons, apps do not violate Apple's terms of use for the app store, and the app does what is says it does - based on the detailed description provided by the developer for the app. Just as Microsoft has never thoroughly tested or done any testing at all for every single 3rd party Windows app, Apple doesn't do any thorough app testing - that is the app developer's responsbility - no different for 3rd party apps on your computer.
and will my money will be refunded or not?
That is up to the app developer.
why cant we try products for some hours to make a buying decision?
With many apps, there is a free version and a paid version. You can try the free version first if available before purchasing the paid version.
i just have device with me and apple is remotely controlling it, why are u blocking users freedom?????
This is a user to user help forum only. You are not addressing Apple here.
If this is how you feel, exercise your freedom to sell your iPhone. Use the proceeds to purchase a device you believe you'll have complete freedom with. -
For some reason photoshop can't find my GPU
So, for some reason everytime i launch Photoshop it gives me the error that some functions arent available because i didnt install my drivers or something, although i did. Another weird problem is that i cant tick '' Use Graphics Processor '' in the preferences section.
And, if i want to edit a file, everytime i edit something, it will crash, whether its text or if i want to make a new project. I tried clearing the cache, tried restalling it for like 4 times, tried to reinstall my drivers, but nothing worked. It kept crashing over and over.
Soo my question is, if anyone could help me fix it.
http://prntscr.com/3wb9al <---- Thats the preferences screen.
Thanks in advance, ScrubblesPhotoshop CS6 windows version is Adobe Photoshop 13.0.1.3 update for CS6 You need to use menu Help>Update.
There is also a subscription version of CS 6 version 13.1.2
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 34973 MB
Memory available to Photoshop: 37176 MB
Memory used by Photoshop: 95 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 6.0.1
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro 4000/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 1
Video Card: NVIDIA Quadro 4000
Driver Version: 9.18.13.3311
Driver Date: 20140429000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA Quadro 4000
Video Card Memory: 2048 MB
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 142.4G free
C:\, 224.2G, 105.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: C:\Photoshop64 Plug-Ins\
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.5
Camera Raw Filter 8.5
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Alias PIX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Contact Sheet II 12.0 (12.0x001)
CUR (Windows Cursor) NO VERSION
D3D/DDS 8, 55, 0109, 1800
ElectricImage 13.0
GREYCstoration NO VERSION
HSB/HSL 13.0
ICO (Windows Icon) NO VERSION
Lighting Effects Classic 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
NormalMapFilter 8.55.0109.1800
Picture Package 12.0 (12.0x001)
Reduce Noise 7.0.0.0
ScriptListener 13.0
SGI RGB 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
SoftImage 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
StarFilter Pro 3 3.0.3.0
SuperPNG 2.0
Wavefront RLA 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Web Photo Gallery 12.0 (12.0x001)
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Photo Collage Toolkit
Kuler
Installed TWAIN devices: NONE
Maybe you are looking for
-
iPad Mini not recognized by iTunes or iMac. Running 10.6.8 and iTunes 11.0.4.
-
XP pro sp2 not installing - IO Error
what's up mac gurus - I have one for you. I have a macbook pro -1.8ghz 2 gigs ram I just reformatted to a brand new tiger install with all the updates. I downloaded Bootcamp - which has worked fantastically for me I might add in the past. Anyhow in t
-
Text in the scheduling lines of a scheduling agreement.
hi, is it possible to add text some where in the scheduling lines of a scheduling agreement (like how we can insert header text in the line item)??
-
Transfer PO value limit from HR system to SRM system
Hi All, Kindly provide some inputs about how could I transfer the PO value limit from HR system to SRM system. It would be good if you please explain in brief. Regards, KM
-
The tutorial says to simply highlight and drag, but that does not work. Any suggestions?