Hi Due to impossibility to upgrade the i tunes version installated i removed the old version but now when i try to install the newer version 10.5.3 the set up hangs on co: collecting information... Please help

Hi
Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting product information and only after a long wait i receive the following message :
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT.type=”win32”,version=”8.0.50727.6195”,publicKey Token=”1fc8b3b9a1e18e3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information. HRESULT: 0x800736B3
Heeeeeeeeeeeeeeelp

What version of Windows are you using? This is not a problem with iTunes. It may have to do with an issue of the compatibility of a newer version of iTunes with an older Windows system/older hardware.
What do you want to synchronize? If you were previously using iCloud you should be able to restore most of your oringinal content onto your new phone via was was last synched with the iCloud on your previous phone/device.

Similar Messages

I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the fol

I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the following choices: Shortcut, Bitmap Image, Contact, Microsoft Word Document, Journal Document, Microsoft Powerpoint Presentation, Text Document, Microsoft Excel Worksheet, and Briefcase. No new folder choice. Anyone have any ideas how I can correct the problem?

This support forum is for Firefox related issues. The volunteers on this forum can only help with Firefox issues.
Please consider contacting another support service like [http://www.ask.com/answers/browse?o=0&l=dir&qsrc=321 Ask.com].
Sorry.

Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?

Hi LyfsGD!
Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for using the Apple Support Communities!
Cheers,
Braden

I just installed iTunes on a WinVista system. Now when I try to setup a new folder, i'm only offered the "Briefcase" option. Was this caused by iTunes. In any case, does somone know how to turn off "Briefcase?"

Can anyone help with the above question. It isn't a show stopper, but is very annoying.

Good lord.
I'd like to try doing a "Run as administrator" on your iTunes.
Quit iTunes first.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit Windows, open the "Program files" folder.
If you have a 64-bit Windows, open the "Program Files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Is "Burn Playlist to Disc" showing up in the contextual menu now?

I updated to the latest numbers on my iMac but now when I try and open documents it tells me I need the latest version to open?

Can anyone help?

Please look in the Applications for the most up-to-date version of Numbers. I suspect you got a free upgrade to OS X Mavericks and also updated your iWorks apps. If that is correct you have two versions of number on the computer, you cannot open a new file with the older version of Numbers, this is what I am guessing you are attempting.

The songs being synced to my iphone would get corrupted and then everytime i plugged in my ipod or iphone itunes said they needed to be restored but that didnt work so i uninstalled itunes and now when i try to install it it doesnt install.

At first everytime i tried to sync songs to my iphone the songs got corrupted and wouldnt play or they would skip. Then my ipod and my iphone wouldnt sync and itunes said they needed to be restored to factory settings, I tried doing that a few times and it never would work, the restore would run into various errors and never work out. I recentlly tried uninstalling itunes to see if that would help but now when i try to install and download itunes it doesnt work and the install runs into an error.
Also my ipod is stuck in recovery mode but my itunes doesnt even read the fact that its there. Can someone please help.

I recentlly tried uninstalling itunes to see if that would help but now when i try to install and download itunes it doesnt work and the install runs into an error.
What does the error message say? (Precise text, please.)

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

TS3297 when i try to access itunes store..i get a message saying 'cannot connect to itunes store..PLEASE HELP!!!

when i try to access itunes store..i get a message saying 'cannot connect to itunes store..PLEASE HELP!!!

Hello Ducati848,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. Help please

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. I can call the same numbers manually so it's not my network. Any help would be appreciated.

This sounds like an international issue? Although I can not see why? I brought my phone in Australia and operating it in Indonesia, I have the same issues.... Otherwise Siri works fine, even texting (SMS) to local numbers siri works well, but dialing local number it just wont work...! I will try using my Australian SIM card and see if that is the reason.. I tried changing the number in the contacts and took out the international prefix, I turned the international assist on and off still nothing.. How frustrating. I called apple, the technican had know idea and we to his supervisor, had to wait fro 40 miuntes and then I hung up..
PLEASE HELP..!

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

When I upgraded to win 7 I was told to uninstall iTunes and its helper programs. Now when I try to install it I get this message that it's not part of the original program.

When I upgraded to Windows 7 I was told to uninstall iTunes and its helper services. Now when I try to install it I get a message that says "the files I'm trying to install are not native to this program. Is this being blocked by Windows 7 security that I'm not used to. I'm not using the Windows firewall. How do I find what process is doing the blocking. Any ideas would sure help. Rex

I understand where you are coming from. I had the Ultimate Tier at one point, but I didn't watch alot of those channels so I downgraded.
Another problem with changing my tier back up to Ultimate is that I was told I would lose the discounts associated with the package I have now. The discounts won't transfer to the new package and they can't give me an equal amount of discounts with a new package. At least with the Sports Pass, it is an add on like HBO, so you can cancel at anytime with no penalties or changes to your plan.
Verizon does advertise the Sports Pass on its website. Here are the channels. The only ones I would be interested in would be beIN and ESPN Classic, since I will be losing that channel sometime in May since I only have the Extreme tier.
beIN Sports HD
CBS Sports Network
ESPN Buzzer Beater HD
ESPN Goal Line HD
ESPN Classic
HRTV
Longhorn Network (Outside of Texas)
Outdoor Channel SD/HD
Sportsman Channel
TVG
World Fishing Network SD/HD

Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

Hi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

Hi Due to impossibility to upgrade the i tunes version installated i removed the old version but now when i try to install the newer version 10.5.3 the set up hangs on co: collecting information... Please help

Similar Messages

Maybe you are looking for