Hi guys Im using 4.3.2 version and want to upgrade to 5.1.1.So Im not getting any update when i turned on the wifiand i dont have option like "update software" in the settings general ,plz help me out by showing path when i connected to wifi
do the needful
Hi mendel tanx for ur quick reply and I'm not founding the settings>general>"software update" option in my IOS 4.3.2...so do I have a option of downloading or updating from WIFI or I have to download from Itunes only,if I am downloading from itunes i need to download full IOS which is 783mb large..do the needful
Similar Messages
-
Hi i am using iphone 3G older version and i cannot upgrade to IOS5 software because when i go to Settings > General ...there is no words like Software Update....any help pls -thnx
Thanks Niel
My current version says it is 4.2.1 (BC148)
I wanted to install Skpe and update new version of Whats App , but it prompts up ....Upgrade to IOS 5 , so if i go to iTunes , could you tell me step by step , how i should do that..
Thanks in advance -
my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is laggingmy new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging -
i just bought a 25$ Gift card for itunes and i forgot my secuirty questions and i dont have a rescue email what should i do? Plz help
There is another option if you still know your ID's password. Call Apple directly and ask for the Account Security department. They will need to verify that you are the account holder, but they should be able to force a reset for your security questions if they do so.
For security questions they are required to get a support pin for the account from you. You can get one by going to appleid.apple.com (no www in front) and signing in using the Manage Apple ID button. The support pin is in the bottom-left corner of the password and security section, but don't generate it until they ask you to.
You will still need to verify one other piece of information with you once this is done. At this time, there is no other way to reset the security questions without having added a rescue email before losing them. An Apple Retail Store would actually need to call in for you too, so don't worry about not having one.
Good luck! -
Wifi Not catching signal iphone 6 , disgusting
ok i understand , then help me out rather judging ....see again i had a chat with the customer executive saying they passed all the test hardware is fine ...okay the guided me to recovery mode restore then the problem remains the same wifi no signal to catch .....so they concluded eventhough the test shows no hardware issues ..still software is okay ..hardware is the issue....
y th **** is happening in such a sophisticated iphone ..they asked me to ship n get rpaired ..imagine i used it without a scratch or a fall for a month ..and this is payed off ..pity on -
i pad with no sound on applications
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
-
I have a MAC 10.5.8 version and wanted to upgrade its OS maverick is this possible?
Can you upgrade an OS X 10.5.8 to a higher version?
Back up your data, click here, and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
(106758) -
i can veiw librarys from both pcs on either computer but when i attempt to transfer music there is no import button on the bottom of my window have i done something wrong with my set up?
Adrian, so glad to see your post. I have the exact same problem you do. I have two macs running the latest Lion and iTunes and when looking at the Home Sharing libraries there is no import button and there is also no pop-up menu allowing you to see only the files not already in your library. This must be something that was broken in just this last update because I have used those features just a couple of weeks ago.
-
My ipod Touch is 3.5 years old and I would like to update the operating system. There is no software section in settings, general or elsewhere. My ipod Touch model is MC008LL and my version is 3.1.3 (7E18). How can I update my operating system. Thank you, Richard
Connect it to iTunes on a computer and update it to iOS 5.1.1.
(72707) -
HT4623 my phone has no update software link in settings/general
my phone doesn't seem to have a update software link in settings/general. can you help?
That setting requires iOS 5.0 or higher. In your case, you must use iTunes on your computer to update your phone. Once you do that, you'll have the over the air update setting.
-
Hello, I am running a Mac book pro soft. 10.5.8 version. Since June the current year I did not get any updates for the software or any kinds of the other application, in my opinion that's weird for such a company.
The problem that I have now is with the Iphone 5 which is not supported for the current Itunes and I can not download the Itunes 10.7 version. What I supposed to do in this case because I can not syncronize at all.
Please give me a hand as soon as possible.
Many thanksMac OS X 10.5.8 is years old, 3 major versions out-of-date and unsupported at this point. You will never get any further updates for 10.5.8, and more and more applications will stop supporting 10.5.8 as time goes on. As mende1 points out, you can buy Snow Leopard (Mac OS X 10.6), which will let you use your new iPhone with your computer, but you need to make sure your computer's hardware is supported. See the system requirements for Snow Leopard:
http://support.apple.com/kb/SP575
If your computer cannot run Snow Leopard, you will need to either buy a new computer or abandon any thoughts of syncing the iPhone with that computer.
Also, note that you'll get far better integration of your iPhone and your Mac if you're using Lion (Mac OS X 10.7) or Mountain Lion (Mac OS X 10.8), which are required to use iCloud. Of course, the requirements of those systems are even steeper than those of Snow Leopard:
http://support.apple.com/kb/HT4949
http://support.apple.com/kb/HT5444 -
HT4623 i m using 7.0.4 version and i cant able to download the 7.0.5 plz help to update
m using 7.0.4 version and i cant able to download the 7.0.5 plz help to update
I have 5c. Error message I get is that the update isn't downloading correctly. My OCD is making me go crazy with that big red number one on the settings icon!
-
i have an ipod touch. previously when i did not update it it used to download skype and kik messenger but now when i have updated it it wont download any od them. i have 4.2.1 software at the moment. im really confused, what might be the problem here?
Many developers when they updated their apps fro the newer iOSs dropped support for the older iOSs. That included Skype and other developers. Unless you have a copy of the apps version that was compatible with your iPod/iOS you are out of luck. Do you cave such a copy in a computer file backup??
-
i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me
If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone -
My IPad2 just got fixed at the Apple Store, but it looks like they loaded up the latest iOS. When i got it home and mated it to ITunes(MacBook Pro), I was prompted to load the latest OS into my main computer which now runs on OS X version 10.5.8...how do i get the latest OS so i can get the latest iTunes and am i looking at problems with the MacBook buy leap frogging so many OS's?
Buy Snow Leopard here: http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Install it, update to OS X 10.6.8 using Software Update, and then you'll be all set with iOS 7.
Maybe you are looking for
-
Automatic creation of work center per new employee
Dear gurus, Is it possible to instantly create Work Centers every time an employee is hired and created via HR module? We consider an employee as "created" when infotypes 0000-0002 are accomplished. Work centers in PS are manually done in CNR1. The r
-
Adding new value in Pick list and sorted logic on basis of new value.
Hi All, I have a requirement where I have to add a new value in seeded OAMessageBean and sort the page contents on basis of selected value. I see in about this page and found out that no VO is attached with this field. I assume that it attached somew
-
[Solved]Qtcurve style disappeared after update
After updated to version 0.65.1-1,and now i can't select qtcurve from systemsettings-->styles,and in kdeglobals "widgetStyle=qtcurve",but in fact oxygen style is used .How can i get qtcurve style back? Edit:I downloaded the PKGBUILD file and recompil
-
P_wi_id in DynamicParameter fails, donu00B4t open workitem, with wi_id works ok
Hi experts, We have an ECC 6.0 EHP3 with a EP 7 (Netweaver 2004s SP18). We use the UWL. The issue is when we try to open a taks in the UWL that launch a transaction in the ECC, it can´t open, show this error: Work item 000000000000 cannot be read Thi
-
Hi All, I am trying to create a simple program to edit and activate some channels in ID. The environment is PI 7.11 SP 6. I tried to import the WSDL directly from WSNavigator and tried to create a Java proxy client. The wizard would not complete and