Hi, how to update my downloads from 128 to 256 kbits ?

Al Tuco,
You can do it with iTunes Match.
See this document: iTunes Store: iTunes Plus Frequently Asked Questions (FAQ) and read the section on "Can I upgrade my previously purchased music to iTunes Plus?"

Similar Messages

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

How can photos be downloaded from a SDHC card to an iPad Air?

How can photos be downloaded from a SDHC card to an iPad Air?

Apple also sells the Lightning to SD Card Camera Reader for US$29. No computer necessary - handy if you're out shooting important pics and want to check them on a larger screen right away.
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

How to update duplicate row from table

Hi,
how to update duplicate row from table?
First to find duplicate row then update duplicate row with no to that duplicate row in oracle.
can you give me suggestion on it?
Thanks in advance.
your early response is appreciated...

In order to find a duplicate row, see:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1224636375004
(or search this forum, your question has been asked before)
In order to update it, just create and use an Oracle sequence, have it start and increment at a value that doesn't exist in your table.
If that doesn't get you going, post some CREATE TABLE + INSERT INTO statements, and the results you want from them, in other words: a complete testcase.

How often does Mail download from a POP account?

I'm trying to help a friend, but I'm not that Apple-savvy. I know in Windows mail clients, there are settings to adjust how often mail is downloaded from a POP server, but I couldn't find any such setting in my friend's MacBook mail application. He is running 10.4.11. Does it only download each time you launch the mail application or click the "Get Mail" button? Does it download on some pre-set schedule that can't be changed? Any help is appreciated. Thanks.

"but I couldn't find any such setting in my friend's MacBook mail application."
I believe the equivalent setting is:
Mail>Preferences>General>*Check for new mail.*
"Does it download on some pre-set schedule that can't be changed?"
You can change the times for the +"Check for new mail"+ setting manually or use the computer setting.
!http://i45.tinypic.com/jl0z95.jpg!

HT1338 i have imac 8,1 how i update my software from 10.5.8 to 10.6.8

i have imac 8,1 how i update my software from 10.5.8 to 10.6.8

Call 1-800-MY-APPLE (or your county's support number). Apple is selling single user disks for $19 or 5-user family disks for $29. If you think you will another copy of SL in the future, buy the $29 family pack before Amazon at $100+ becomes your only source.

Please fix my apple account. I cant update and download from app store. I wrote you before but there is no answer. For example one message box i got says: Your Apple ID has been disabled. But the itunes guy says, he cant help me. Who can?

please fix my apple account. I cant update and download from app store. I wrote you before but there is no answer.
For example one message box i got says: Your Apple ID has been disabled.
But the itunes guy says, he cant help me. Who can? I can use my apple acounts, why?

Try here first > Apple ID: "This Apple ID has been disabled for security reasons" alert appears
If you can't resolve the issue on your own, call Apple or schedule a call > Apple - Support - Solutions
Keep in mind, this is a user to user forum. You are not communicating directly with Apple here. No one here can fix your Apple iD.

How to update and download new applications

hi there,
How to update and download application? It ask to accept terms and condition but not showing any "accept" button.

Hello sachin1620,
Thank you for providing the details of the issue you are experiencing with accepting Terms & Conditions on your iPhone.
First, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If you can access your home screen, I also recommend verifying that cookies are not blocked and private browsing is turned off in Settings>Safari:
iPhone User Guide - Safari settings
http://help.apple.com/iphone/7/#/iph3d7aa74dc
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to update iphone 4 from 4.3.1 to ios 6, How to update iphone 4 from 4.3.1 to ios 6

How to update iphone 4 from 4.3.1 to ios 6, How to update iphone 4 from 4.3.1 to ios 6

Plug it into your computer running iTunes and click the check for updates button if you're not prompted to update it automatically.
You must be running iTunes 10.7 on your computer.

How to update info cube from PSA

Hi,
how to update Info cube from PSA.
Coz we have changed the update rule for one characteristic.What is the implication of updating it from the PSA.
Regards,
Viren.

Hi,
Now there is one more problem in update rule.
We are using " 2LIS_03_BF " as datasource.which doesn't contain Sales organization,Division or Distribution channel.
So in transfer rule for the infosource "2AF_MM_INV_1" we can not update the salesorg,division and Distribution channel.In communication structure all these objects are assigned to respective info objects.
Now in Update rule we have kept Division and Sales organization as initial.Still we are getting correct data for the Division and not a single record contains Sales organisation and for distribution channel we are using update routine..
SELECT SINGLE DISTR_CHAN INTO DISTR_CHAN
FROM /BI0/MCUST_SALES WHERE DIVISION = COMM_STRUCTURE-DIVISION
AND SALESORG = COMM_STRUCTURE-SALESORG
AND CUST_SALES = COMM_STRUCTURE-CUST_SALES.
Now my problem is this update rule fatches record on the basis of cust_sales only as comm_structure doesn't contain any thing for division and sales org.So how to get value for sales org and Division in Communication structure.
Summary, I want to get data for Distribution channel and sales org in my cube.
Pls help me out...
This is very urgent..
Regards,
Viren.

Why do some songs re-download from iCloud in 256 Variable?

Some songs will download from iCloud in 256-bit, others in 256 Variable. Why that? All were uploaded/matched from Apple Lossless (ALAC).

I don't know this for sure, since I have not seen this behavior, but this is my speculation.
Songs that are matched will download from the iTunes Store in straight 256 Kbps, since that is how they are encoded. The VBR downloads are probably coming from tracks that are uploaded, and this is how you've got your import settings set up. Any ALAC files that are not matched will have a copy made of them and that will be uploaded so I'm guessing that whatever your import settings are is how the files will be encoded.

How can I see what, when and how much has been downloaded from the net?

I use a satellite internet service which limits me to only 200Mb of downloads in a 24 hr period. Should I go over, I am "locked out" of my internet service for the next 24 hr period. Lately I have been locked out without thinking I have downloaded anything. I am wondering if there is a place on the computer I can look to give me an idea what has been downloaded and when? I did change the Apple software update to not "automatically update important files" but I am wondering are there any other programs or anything the system may be downloading automatically without me knowing and what can be done to rectify it?
Thanks

Thanks for the thoughts. Here is some more for consideration. I was locked out yesterday and when I finally got out of "lock up" today, I went to my satellite internet provider's site to see how much and when it was downloaded. I booted my machine at about 10 AM yesterday and according to their site between 10 and 11 AM I downloaded 188MB of data. Then from 11 AM to Noon they said I downloaded another 28MB which then resulted in my being locked out of the internet until noon today. During that time I was on the net, I initiated no downloading from any site nor did I have any video streaming. What is frustrating is I have no idea what is being downloaded or how much. Most other days of the week it appears that downloaded material is 75Mb or less and I can remember generating the downloads.Looking at their site, the "downloading" of mystery material begins quickly after booting the computer which leads me to believe, as Kappy was saying, this is likely something like Apple Software updater or such set to "Download on Startup". I guess I'm not quite sure how to check to see what is set to "Download on Startup" and how to make sure nothing downloads at startup unless approved by me. Any thoughts?

How to update recovery partition from 10.8.2 to 10.8.3

I recently update my MBP from 10.8.2 to 10.8.3. I also use BootCamp to Windows 7. When starting the MBP with holding alt/option button, it says that the recovery partition is still in 10.8.2. How can I update the recovery to 10.8.3?
Thanks in advance.

kokeropie wrote:
Being new to Mac OS, I thought that the Recovery partition should the same with the OS installed. So when I want to recover my MBP, I can recover to the latest OS installed on the MBP.
Anyway, what the function of the recovery partition? I know that I can restore my current setup and data using time machine. Or the time machine rely on recovery partition to restore the data?
When using the Recovery partition to Reinstall OS X (for your new Mac), you will get the version of OS X that shipped with your Mac (unless Apple updates that version on their servers). So, for example, let's say your Mac shipped with 10.8.2 (Recovery partiton also that version) and you update OS X to 10.8.3 from Software Updates. When you restart into the Recovery partition using the Command+R keys and you want to Reinstall OS X, you will get what ever version is out there for your Mac model which might be 10.8.2. This means after the install completes you would need to run Software Update to update it back to 10.8.3. So, the version of the Recovery partition has no bearing on what version of OS X will download. Lion (10.7.x) was the same way until version 10.7.2. When updating Lion 10.7 or 10.7.1 to 10.7.2, there was also an update for the Recovery partition. To my knowledge there haven't been any Mountain Lion updates like that. The full installer will always write a Recovery partition and the version number will be the same as the OS X version. However, Software Update will not update the Recovery partition.
The functions of the Recovery partition are many. When you boot into it you see the OS X Utilities menu. From there you can Reinstall OS X, use Disk Utility to manage your drives, Restore from a Time Machine backup, use Terminal (from the Utilities menu bar option) to do command line commands, change your Startup Disk and other functions.

New PC: How to update my libraries FROM my IPod?

I have been using ITunes and Ipod for some time. Now I bought a new Laptop, uploaded the latest ITunes and connected my IPod. I hoped it would be able to sync the libraries exactly from my IPod. However, it only uploads the songs that I bought thru the store. But the songs downloaded from CD cannot be uploaded and sync-ed. So, I have my IPod on one side with all the songs and playlists, and a new ITunes on the other, only with the songs that were once bought online. How can I get my ITunes library up-to-date with my IPod?

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Hi, how to update my downloads from 128 to 256 kbits ?

Similar Messages

Maybe you are looking for