Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help
Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help
savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR
Similar Messages
-
i have been given an apple mac powere pc g5 , can i update it and use it normally also when it asks to update it asks for a password which i dont have , can this be reset ?
Updating or upgrading depends on what version of OS X you are running. A G5 Mac can not go further than Leopard 10.5.8 as all later versions of OS X require an Intel preocessor.
Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274 -
What do the zig zag lines mean on a clip in Premiere pro?
What do the zig zag lines mean on a clip in Premiere pro? And how do I fix it as I can't see a video image for that clip?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Review the NEW ITEMS process link in reply page #5 in The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 to be sure your sequence and video match -
having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.
sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR -
How can you remove multiple gaps at one time between clips in Premiere Pro CS4?
I know about Right Click and Ripple Delete and Edit > Ripple delete - but this only works on 1 gap at a time. What about several/many gaps at one time? Please help!
Suppose you have track 1 filled with clips and gaps.
Drop a color matte or transparant video or what ever, in track 2 and stretch it over the selection of gaps you want to delete.
Select everything in that selection in track 1 and drop it in track 2 on the color matte. Don.t deselect and drop it back into track 1.
Track 2 is now filled with pieces of color matte superimposing the gaps.
Select everything in track 2 and ripple delete. -
Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST> I have tried many troubleshooting solutions I found online nothing has worked.
Hi,
Sorry to hear about the experience. Please provide your computer configuration details.
Memory, Processor, Graphics card, Exact version of Premiere Pro, Error message that you are get. If you can post screenshots of the error report that would be helpful.
Thanks,
Rameez -
I am currently on a plan with my parents, but my two years is up and I am due for an upgrade. My plan was to drop from my parents plan and join my fiancee's. Will I be able to get a discounted phone, and keep my existing number?
You'll need to do an Assumption of Liability. The parent that is the account owner and your boyfriend will both have to be at the store to do this. Your line is actually your parents and it will be your fiancee's once the change is made. But you should be able to get your upgrade and you definitely get to keep your number. Also depending on your fiancee's credit history there may be a security deposit required.
-
Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs too.
This is a user to user forum. We are not Adobe. For pricing information, you need to contact Adobe Sales in India.
Premiere Pro is just for editing video. Photoshop or Photoshop Elements is for editing photographs. -
how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?), how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?)
Edit 4K and export what ever you want from AME
-
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you! -
I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent.
There isn't one.
amrzaky wrote:
I can't contact with previous owner s i need another solutoin
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
my ebay toolbar and the ebay logo that was in my system tray at the bottom have both disappeared when I installed FireFox??? How do I get them back? Please help.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I was using my iPad 3 awhile ago when it just blacked out and now it won't start. Can anyone please help me fix it?
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
[SOLVED] Problem With conky and or xcompmgr
So I tried to search for this issue but i don't know quite how to explain through words on what is going on. basically i got corky installed. and so when i login my screen all around corky doesn't refresh. and i believe this to be because of xcompmgr
-
How do I edit or turn off the autofill username for Comcast?
Overtime I have accumulated a numberof autofill usernames at the Comcast signin. (due to typos, etc.) So I now have this long list of usernames to choose from. How do I edit this list or delete this function entirely?
-
In Listcube tcode User specific Option disable for Save as Layout
In Listcube tcode User specific Option disable for Save as Layout
-
hi, Any one please tel me where can i find faq's on idoc adapters? thank u Swari.
-
Consuming webservices using CF8
I recently upgraded to CF8 and I'm not able to consume webservices from my dev edition on my personal PC. I have tried making my own simple test webservice, but I'm not able to consume them using CF. (I'm able to consume the ws using .Net or Java, bu