Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

Similar Messages

MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

Short Version:
I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
Long Version:
I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
The iPhone(s) I am using are iPhone 4's with iOS 4.1
On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
The iPhones are set up in iTunes with names similar to dave1 and dave2
On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
Pairing alone is an event, but here's an example of what's happening:
I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
Open to ideas....
If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

MacBook Pro (snow leopard) 2006 will not restart. Getting blank screen with folder (?)

MacBook Pro (snow leopard) 2006 has begun to turn off attached Cinema Display over the last two days. Comes back on on restart. This morning, the MacBook screen also went blank white on restart. Tried to use Snow Leopard CD to restart but it was ejected and folder with ? is only thing that displays. Will not restart. Have replaced hard drive 6 months ago. Help! What's wrong? I need this computer for work.

hawpotr wrote:
1. replace my current internal HD and convert it to external HD for use as secondary boot drive,
No. That has no advantage for you.
leave the internal HD alone and purchase an external HD that I can clone and use as boot drive in case of emergency?
Yes. I use Carbon Copy Cloner to make a boot drive and as a backup (in addition to Time Machine). CCC allows one to make incremental changes as well as creating a copy of the recovery partition. This means that if run on a proper schedule, you data will; be well protected and the MBP can be in operation very quickly if the internal HDD should fail.
A clone should be a 2.5", 9 mm thick SATA HDD so that it will fit inside the MBP. It can be powered from the USB port thus not requiring an AC outlet. In my collection of HDDs, I favor HGST and Seagate products. I principally use OWC enclosures that allow for USB, Firewire and eSATA connections. These are expensive but one can use a more modest one as well of one can tolerate longer data transfer times.
Here is a link showing some available SATA HDDs that will complement your MBP:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
You can look for enclosures on the same web site.
Ciao.

I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?

Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X

Why does my macbook pro, snow leopard get so hot so quickly?

why does my macbook pro, snow leopard get so hot so quickly?
Can someone give helpful suggestions on solving this problem?
Thanks!
NELLY

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
Thank you!
This question was solved.
View Solution.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Light that flashes on my PC each time I press the comcast tv remote buttons

Recently a light flashes on my PC each time I press the comcast tv remote the light is on the frame of the computer right above the wording "HP Touchsmart 310 PC"...........this just started happening when I obtained a new remote from comcast to replace my old tv remote which stopped working...... what would cause the light on the PC to flash?? Is this a serious problem.....Comcast cannot help me ...I would appreciate any help anyone can give...Thank you [edited personally identifiable information]
This question was solved.
View Solution.

As long as nothing actually happens with the PC, there isn't a real issue.
The Comcast remote control uses IR to communicate with the TV and cable box. Your wireless mouse uses the 2.4 GHz band and the usb dongle plugged into your PC.
You might be seeing spurious radio frequency transmission from the Comcast remote, but I really can't see this as being something to worry about.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.
I used to install the rEFIt to boot with win7. When I deleted win7, I didn't uninstall rEFIt. Nothing wrong with it. One day after I watched movie in full screen,I pressed esc to quit. Then I found the touchpad didn't work. I can't turn off air. I just pressed power button for a little while. It rebooted, then my nightmare just began...
I have tried everything, PRAM, command+R, literally everything. No change.
But when I plug a CD-ROM with USB, I can only here one BONG, just once, then white screen, Like waiting for something...
I took it to a service center in China, they told me the CPU had broken. SInce it's one month out of warranty, they wanted to charge me for like $250....
I really don't think that's CPU's problem. I checked the history, it seems like somebody else also had the problem before.
Can anyone give me some hints??? Thanks!!!!!! Or I have to take it back to America to check....

Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

Then call AppleCare and talk to someone in account security.

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex

I just got a macbook pro as a gift and i wanted to upgrade to mountain lion for free but i don't know where the laptop was brought? can anyone help me?

I just got a macbook pro as a gift and i wanted to upgrade to mountain lion for free but i don't know where the laptop was brought? can anyone help me?

No one here would have any information as to where the MacBook Pro was purchased.
Contact the person who gifted the Mac.
Apple - See if you qualify for a free OS X Mountain Lion upgrade.

I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no

macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Similar Messages

Maybe you are looking for