Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW  System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

Similar Messages

  • HT2534 I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
    e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
    If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054

  • I accidently closed the area where u add the website at the top and now i cant figure out how to show it again so i can type n a different web address

    I accidently closed the are where u add the webiste at the top and now i cant figure out how to unhide it so i can type in a different web address

    In the menubar, Safari > View > Show Toolbar.
    Regards,
    Captfred

  • We have three Ipads in our house.  We have one itunes account with multiple devices like two Iphones and Apple TV.   My question is about our three Ipads.   How can I set up the imessaging and facetime on all three devices while only using one Itunes acct

    Okay.  We have three Ipads in our house with only one Itunes account.   When I go into imessaging and facetime on each of the devices, it wants to start switching my wife's cell phone and then the three emails associated with each Ipad to the contact information for all of the Ipads.    As of this morning, only the imessaging and facetime are turned on my wife's iphone and ipad.   My kids imessaging and facetime is turned off.     Do you really have to have an itunes account for each device to make then work???    Any help would be very much appreciated.
    Ryan

    There is only one solution. Each user must have their own separate user account. All of their respective data would be contained in their separate user accounts. This also means each will have a separate iTunes Library. If you all use the same third-party apps, then each will have to purchase their own copies under their own Apple IDs. Some data sharing is possible. See:
    iTunes- How to open an alternate iTunes Library file or create a new one
    iTunes- How to share music and video
    iTunes- How to share music between different accounts on a single computer
    iTunes- Setting up Home Sharing on your computer

  • HT4061 I traded in my iPhone for samsung. The info n it has been wiped out. Don't have he serial no. Because I was not able to to receive txt mags from former imessage iPhone users verizon had me delete my iPhone and my ipad products in Apple store. Not w

    Yesterday i traded my iPhone for a galaxy. All of my contacts who have iPhones can no linger text me because my phone number when chosen comes up with imessage option only. The only way they can txt me is to shut off their imessage when texting to me then have to out it back on for others - this is not the correct solution. So i then called verizon tech and also went in person to make sure my iPhone imessage was off before they wiped it clean. It still didn't work. I then went online and to the apple store and edited all my devices and removed them from the apple store and still not working. He last thing I did was went into my only other device, the ipad and went into imessage and took my phone number out of the screen and then shut off imessage there too. Somehow my phone number is still associated with iPhone. The iPhone is wiped clean. Hopefully you can help

    Call AppleCare, because, according to Apple, removing the devices from your support profile should have fixed this issue. You can also try changing your Apple ID password, but given what you've done, I doubt this will help.

  • Do you have a fix for the problem with Avast. Because soon I will just start using IE since Avast has worked fantastic for me. But I would rather not.

    Question
    Do you have a fix for the problem with Avast. Your upgrade process notifies me that it is not compatible with Avast so I always delete it. Soon I will just start using IE since Avast has worked fantastic for me. But I would rather not. Please help.

    Avast needs to update their Web Rep add-on for Firefox 5.0.
    You can look at the new pre-release version of Avast for Firefox 5.
    * http://forum.avast.com/index.php?topic=80362.0

  • I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd ( bootcamp). Does anybody know why ?

    I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd (bootcamp ). Does anybody know why ?

    Please provide a bit more detail on what 'recognize' means. A screen shot is always very helpful.

  • Catalyst 6500 with CatOS ISCSI

    Hi, I'm configuring a Catalyst 6500 with for ISCSI.
    Following the recommendations I have to configure: portfast, jumbo frames, flow control and disable unicast storm control
    - Portfast: on the server and ISCSI SAN ports
        >
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Tabla normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin-top:0cm;
    mso-para-margin-right:0cm;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0cm;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    set spantree portfast
    - Jumbo frames: Set port jumbo
    - Flow Control:
         > set port flow control receive desired
    Questions:
    1. Where I have to configure flow control? only on the SAN ports and NIC servers? or server ports too?
    2. Unicast Storm control: how can i configure this option?
    Thanks

    We are having the same exact problem. We've done what you've tried with no luck also. Strange thing is that in another building we have the same setup but only with a 6148V blade and that Tandberg has no issues. We're using a 6148AF with the one we're having problems with. We've tried with a 6348 blade and it works fine. I'm thinking it's something with the 6148AF firmware (ver. 8.2(2)).
    Were you able to solve your problem?

  • Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.

    Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.  It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red.   I've never seen this before and ignoring it does not effect any operations.   Is this legitimate or some kind of identity fishing?

    Hello,
    Have you done the recent Security updates?
    Is this from Sleep or on bootup?
    Timing is about right for the FlashBack attack.
    Disable Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
    https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
    More bad news...
    https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

  • I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

    I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

    You're welcome.  It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
    As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have.  If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
    Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

    My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

    When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

  • I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

    I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard. 

    Hi Clarkett99,
    To use an external hard drive for your iTunes library, see the steps in this article -
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    iPhoto can be used in a similar way, follow the steps in this previous discussion -
    how do I save photos and their albums...: Apple Support Communities
    https://discussions.apple.com/thread/3744259
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw)

    Processor 3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw here.)
    Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

    I was confused by this statement
    It is telling me the harddrive is full and is not functioning correctly.
    OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD.  Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them.  There is no design flaw between your ram and HDD.  Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
    I would do three things.  First I would create a backup, backups are important.  Second, I would reboot into recovery and repair my HDD.  Lastly while still booted in recovery I would repair permissions.
    Can you capture a screen shot of the exact error you are getting?

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

Maybe you are looking for