Hi, I have a question related to how to tell Indesign to vary content in a multiple-page document.

I am working on a data merge project in Indesign. I have a basic letter that will have about 8 different versions. They only way the letter will differ is by one paragraph. Though I am merging contact information from excel. I am wondering if there is another way to tell Indesign what letters should get what paragraph. I am trying to avoid going through thousands of fields in Excel, to input the paragraph content for merging. Please help!

Here you go.
https://www.dropbox.com/s/dhxgyxsqpp8gcxq/8-variable-paragraphs.zip?dl=0
The Excel file has a couple notes in it. The ID file is CS6...if you need a prior version let me know.
Resist the urge to preview the file, it can break ID's merging. There are two different merge files. You can swap one for the other as the headers are the same. Any questions, I'll be poking around the internet for a bit longer tonight, else I'll check into the forum in the morning.
Mike

Similar Messages

  • I have a question related to patch download using ftp which was working in

    Hi,
    I have a question related to patch download using ftp which was working in Classic Metalink.
    ftp updates.oracle.com allowed to download patches before but now it says the following.
    $ ftp updates.oracle.com
    Connected to updates.oraclegha.com.
    421-*********************** Downtime Notice ************************
    421-
    421-This service was retired as of November 06, 2009.
    421-
    421-****************************************************************
    421
    Is there a way to download patches now using command prompt. I couldn't see category for metalink in forums hence posted here.
    Regards,
    Nagendra Chillale

    Enter the following command where username and password are your My Oracle Support login and password and filename is the patch file name that you copied from the Properties window::
    wget http-user=username http-password=password no-check-certificate output-document=filename "http://updates.oracle.com/Orion/Download/download_patch/<filename>"
    For example, to download patch 7154429 for Linux where the patch file name is p7154429_10204_Linux-x86.zip, enter:
    wget http-user=[email protected] http-password=password no-check-certificate  output-document=p7154429_10204_Linux-x86.zip "http://updates.oracle.com/Orion/Download/download_patch/p7154429_10204_Linux-x86.zip"
    My Oracle Support FAQ ID 747242.5
    Regards,
    Nagendra Chillale
    Edited by: user12023326 on Dec 16, 2009 11:43 AM

  • HT2506 Hello guys, I have a question about Preview - How do you loop a slideshow?

    Hello guys, I have a question about Preview - How do you loop a slideshow?

    Had the "loop" feature using Preview in 10.4.11; upgaded to 10.5.8 and it's gone. Don't you have to work at "Taking" it away? Makes no sense. Now you have to look for a third market for something that was included in Preview since the first version was launched.  ....I don't get this one.

  • How do I change the paper size in an existing Pages document?

    How do I change the paper size on an existing Pages document?

    So are your text box set to floating? You can tell that by looking in the Inspector>Wrap Tab when you select the text box.
    If I had to guess I would say that the text boxes are floating and when you change the size of paper the text that you have in the main body area is shrinking so that it does require as many pages and you are losing the text boxes at the end. Is that correct? If so, they are still there, you just have to add page breaks to get to the pages that you lost and you should see them again.

  • I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    In pages you can only have one orientation of the Page. You have to rotate the content on the pages that you want horizontal. Save the document in Pages format so you'll have a original version to work on. Then Export to or Print to PDF and open the document in Preview. Here you can rotate the pages to horizontal viewing.

  • HT3384 How do I change margins and header footers on a pages document?

    Hi can anyone help me on how do I change margins and header / footers on a pages document?
    Many thanks

    Oddly, when one enters text that is a paragraph string longer than the width of the the page, the text doesn't wrap. There seems to be something a bit wonky with the margins, but perhaps it's something else. I fiddled with styles to see if I could control it, but to no avail. I'm giving up and boing back to '09. Each time I think I'll switch to iWork 5, I encounter some other restrictive feature that sends me scurrying back to '09.

  • How to create multiple pdf Files out of multiple pages documents??

    I wrote multiple pages documents and stored them in a directory. That is nice, but now I want to transfer them all into pdf files.
    Is there a way to do this or do I have to open them one by one an select "Print" and so on??

    Pages 5 has virtually no AppleScript support so it would be difficult to even make an Automator workflow to do what you want.
    So yes you will have to make a pdf of each one. Be warned that Pages 5 stuffs up links after the first pages of pdfs.
    Apple has removed almost 100 features from Pages 5 and added many bugs.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder if you had it previously.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • How to post to database as single user on multiple pages

    Hi,
    I am trying to develop a quiz where I use the ADDT insert record form wizard. Since the test will have over 50 questions, I would like to have two questions listed per page, and then have it all be submitted at one time. Anyone have any ideas of how to do this? I am using the insert record form wizard so that I can upload this information to a database to keep on file.
    Any help would be appreciated.

    jedimark,
    Here's a way to do it using session variables:
    Brief Session Tutorial
    However, you could also do it using an initial Insert Record page, and then every page after that would be an Update Record page. You would just need to pass the primary key for that Record to each subsequent Update Record page.
    Shane

  • How to import and make the content of the original PDF document editable and preserves the pdf appearance and retains existing fields and formatting in LiveCycle

    Can someone tell me how I can see my content (artwork and text) after I import  it into LiveCycle Designer ES4?  I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

    Can someone tell me how I can see my content (artwork and text) after I import  it into LiveCycle Designer ES4?  I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

  • How can I take data from multiple pages documents and put them into a numbers table?

    I produce invoices in pages, with dates, invoice numbers, references and amounts due. I want to take all this data from multiple documents and transfeer it to a single numbers table. Is this possible and if so, how do I do it. I know I can do it the other way round with mail merge but I can't figure out how to do it this way round?
    Thanks,
    Keith

    The data is spread throughout a pages document in specific areas here's a copy of an invoice for you to have a look at.

  • How to embed B, and C size engineering drawings into Pages documents

    I am attempting to create a technical manual which includes both 8.5x11 pages (portrait orientation) and larger B and C sized PDF drawings (landscape orientation). My current process is exporting a finished Pages document to a PDF, and then manually dragging in the other drawing PDFs to create the final version. However, as both drawings and text regularly change, there is a great deal of effort to manually assemble a final doc. Plus, the TOC and other auto-updating fields in the Pages document change as new text is added, so page numbering the final PDF is a nightmare - it is presently done in Acrobat Pro.
    Any suggestions on how to make the complete manual do the following:
    1) remain in an easily editable Pages format conducive to regular updates?
    2) allow for automatic updating of pages, fields, TOC, etc. as new text and/or drawings are added?
    3) keep PDF drawings in vector format so they can be zoomed on-screen without becoming pixelated?
    Thanks,
    -Jon

    My current process is exporting a finished Pages document to a PDF, and then manually dragging in the other drawing PDFs to create the final version. However, as both drawings and text regularly change, there is a great deal of effort to manually assemble a final doc. Plus, the TOC and other auto-updating fields in the Pages document change as new text is added, so page numbering the final PDF is a nightmare - it is presently done in Acrobat Pro.
    In the past, Apple has system level support for portrait and landscape in one pagination. This system level support was in the graphics model, and was implemented e.g. in WordPerfect for Mac.
    Presently, the situation is as you describe, first, the main pagination is output to PDF and, second, supplementary pages are inserted manually into the main pagination.
    Off the cuff, I do not know if similar system level support is available in Mac OS X which is based on a somewhat different graphics model.
    As I understand it, what you want is possible at application level in Microsoft Word, although I don't have experience with that application.
    I would not know how to do what you want in QuarkXPress or InDesign in the versions I have. These applications using internal graphics implementations and bypass system level services on Mac OS X and Windows.
    /hh

  • How to change DEFAULT font and font size on new Pages document

    When I open a new Page document, it always comes in with a default font and font size. I know how to change those settings on the open document.
    I want to know how to change the ~default~ font and font size so that a new Page document always opens with those default settings.
    -Thanks for your service to the community.

    Hi Lionate
    Welcome to the forum.
    Make a document to your liking.
    Change the Body style and any other styles in :
    +Menu > Show Styles Drawer > click on the little triangle next to Body > redefine Style from Selection+
    Capture the page:
    +Menu > Format > Advanced > Capture Pages… > Name it > OK+
    +Menu > Format > Advanced > Manage Pages… > Delete other Sections/Pages > OK+
    Save as a template:
    +Menu > File > Save as Template…+
    +Menu > Pages > Preferences > General Preferences > For New Documents > click Use template: > Choose > browse to the template above+
    Peter

  • How do I create a single PDF file with multiple pages?

    Hi, I occasionally need merge several jpg images into a single pdf file with multiple pages (one Jpg per page). I have tried doing this on Preview, and by selecting all the pages I want to include in my document and trying to save to Pdf through the "Print" function, but every time it only saves the first page.
    Can anyone tell me if there is a way to save multple-page pdf files without having to purchase a specific program (i to this too infrequently to justify the cost)?
    Thanks very much,

    This works for me...
    Open first image in Preview View > Sidebar. Drag the other images into Sidebar, then select all.
    From File menu > print selected images. Choose PDF > Save as PDF
    -mj

  • How can I add an audio media file to my Pages document

    I have created a Pages document on my iPad.  I can add photos but not audio (there is only a Photos option)  So I emailed the document to my desktop and went onto iCloud via Safari.  Now i don't see the Media icon (I am in Pages beta if this is relevant).  Any suggestions?

    I knew about the comment possibility, but as you have said...users would need instruction.  This is intended for a controlled environment where I know that everyone will have a device with a microphone.  However, the users of the form would have very little experience as this is meant for patients.

  • How to create a Grand Total on a Multiple Page Document

    I have created a form that is 4 pages long. I created the form in WordPerfect and then converted it to pdf. Then I opened it into Adobe Professional 8. I had it automatically converted into LiveCyle. I would like to just add the total of the four pages to a grand total on page one but whenever I use FormCalc is says it doesn't recognized page 2. Have I done something wrong or am I missing a step somewhere. In the Hierarachy area it sees the form and the four pages. For some reason it doesn't seem to recognize it as one whole form. I'm not sure what the deal is. I have now created a subtotal for each individual page and each page will total separetly. But I can not get a grand total.
    I just purchased Adobe LiveCycle Designer book by J.P. Terry. It doesn't say anything about this. AHHHH! I need some help.

    Hi Carolin,
    You can check Purchase Order. It is a sample that Adobe delivers with LiveCycle Designer. It has a script that takes care about a calculation trough a multiple pages form.
    You should find the sample under :\Program Files\Adobe\......\Designer ES\8.2\EN\Samples\Forms\Purchase Order\Dynamic Interactive\Forms

Maybe you are looking for

  • Going crazy trying to uninstall PC Suite

    Hi there Please excuse my total lack of technical knowledge however I have an old version of PC Suite 6 installed and I cannot get rid of it. I have recently got a 6120 classic and am trying to install the new version but the old version - which, inc

  • [SOLVED] File name encoding issue

    Hi all, I have a large series of files with accented characters, they were all displayed nicely, but at some point, when I copied them to another computer, the characters were replaced by codes, for instance: "ó" --> "ó". +Renaming ie. "Pasó" (bad

  • Regardig purchase order data

    Hi all,               I have a requirement to modify the purchase order data in the ekko table and other underlying tables. I want to modify the field Invoicing Party(LIFRE in EKKO).             is there any BAPI or standard function module to do thi

  • Block corruption in Free Space

    Hi, Environment:- Oralce 10.2.0 Windows platform I am facing problem of Logical block corruption. RMAN validate block corruption (DBVerify as well) But no entry in Alert log file. When I check Which segment has block corruption I found that block cor

  • System Startup/shutdown text..

    I have recently purchased a new Mac Mini Core Duo. Runs perfectly, but one thing that is bothering me is that when I start it up or shut it down I get the white text on the black background. I am wondering if there is a spefic reason thins is happeni