Hi. I have an older Mac running OS 10.4.11. I absent mindedly upgraded to FireFox 3.6.24 and now can no longer attach files to email in gmail or ymail. Is it possible to load an older version of FireFox and regain this function?
FireFox 3.6.15 and newer require OS 10.5 or 10.6. The latest version of OS X the Macintosh G4 I own is physically capable of running is OS 10.4.11. Whenever I try to attach a file to an email in gmail.com or ymail.com, FireFox crashes. Is it possible to load a version of FireFox older than 3.6.15 to avoid having to buy a new computer?
Hi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare
Similar Messages
-
Recently, I did an update on iTunes on my Acer laptop. Now I can't open iTunes & I get a Runtime Error telling me C Runtime library is loaded incorrectly. I have Windows 7 64-bit. Do I need to reinstall iTunes.
Hi sungoddess69,
Thanks for visiting Apple Support Communities.
To resolve this error, I recommend completely removing and reinstalling iTunes and all of its related components using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
Ihave forgot my password to my account. ( I set a new one up to do this). When I go on to retrieve my password, it mails it to an email address I can no longer get to. I always use the same combination of passwords, so I know it is something simple. I am trying to get to my iCloud account and retreive my apps for my iPad.
If you can verify the serial number of an apple product registerd in your name, and can verify your apple id, and possibly some other info (credit card on file is a good one) you can call 1-800-APL-CARE. The tech should be able to verify this info, and if so can transfer you to account security.
-
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
I need an older version of keynote for my older Mac running 10.7.5
How can I get an older version of keynote for my older Mac running OS Lion 10.7.5. I have it purchased for my newer Mac.
Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
(116751) -
ICloud on older Mac running 10.6.8 - with Intel 2 GHz Core Duo
Do I understand correctly that I can't upgrade to iCloud from Mobile Me, with an older Mac running 10.6.8 (with 2 GHz Intel Core Duo)?
This will be the situation with Snow Leopard if you migrate your MobileMe account:
Your email, calendars, contacts and bookmarks, and 'Find my iPhone' will be migrated to iCloud.
Your iDisk, together with website hosting and Gallery, will continue to work as before until next June.
Syncing of Dashboard Widgets, Dock Items and Keychains between Macs, and Mail Accounts, Mail Rules, System Preferences, Signatures & Smart Mailboxes between Macs & iOS devices, will cease altogether.
You will be able to access email, calendar and contacts on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is). -
Cannot receive .mac e-mail on my two older Macs running Mail 2.1.3 on OSX 10.4.11 since the last weekend.
Still sends mac.com e-mails and all other "non mac.com" e-mails on "Mail" are working fine incoming and outgoing?
Cannot access via i-cloud on 10.4.11 as told not supported and cannot update for old I-mac as later OS not suitable for processor on imac
Works OK on Macbook air with current OSX
HELP.....Please??IT WORKS!
Though it doesn't tell you this in the password error message, the problem IS the new Apple ID password requirements.
FIRST go to https://iforgot.apple.com/ and CHANGE YOUR PASSWORD. In my case, my old password didn't use at least one capital (upper case) letter, and that was preventing the whole thing from working. When all the little password criteria lights are green, you're good. Save as you exit your browser if it asks you to.
Then open Mail, preferences, accounts, and click on the plus sign to create a new account called iCloud Mail.
These are the settings I used:
Account settings:
Description: iCloud Mail
email address: [email protected]
Full Name: John Doe
incoming Mail Server: imap.mail.me.com
User Name: John Doe
password: (enter new Apple ID password)
Outgoing Mail Server (SMTP): smtp.mail.me.com
Server settings:
Server port: 587
check box Use Secure Sockets Layer (SSL) yes, check it
Authentication: Password
User Name: [email protected]
Password: enter new Apple ID password
Click on Advanced tab:
Check "Enable this account"
Check "Include when automatically checking for mail
ignore Compact mailboxes automatically
Check Automatically synchronize changed mailboxes
IMAP path prefix: leave blank
Port: 993
Check Use SSL
Authentication: Password
Be sure to save the settings when asked after you close the accounts window.
O.K., this little part may be a complete coincidence, but in mail, nothing happened when I hit "get mail". Then, when I clicked on the little "broken" icon on iCloud mail on the left, it sprang to life and imported all my mail from iCloud. However, as I say, that may have been unnecessary and a complete coincidence of timing as I had hit "get mail" previously.
If that doesn't work, try shaking dried chicken bones tied with cat gut over your machine.
Best of luck! -
I recently attempted to upload the latest FLASH PLAYER. My older Mac (G4) works wonderfully as a desktop computer, so I NEED a flash player
badly, but now it says that Adobe no longer supports older Mac Power PCs! What's up with that?? Some of the best and most desirable computers
ever made are of no interest to Adobe?
I there a work-around to eliminate the need for Adobe's Flash Player?? Another Flash version......can you say Macromedia? HELPYou can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
But possibly that only works with Leopard. -
hey guys, i downloaded the new software for my iphone and now cant connect to my itunes on my mac. its an older mac running 10.5.8
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
Is there a way to migrate or copy contents of my Address Book from an older Mac running OS10.4.11 to a new Mac running 10.10.2? Migration Assistant in Yosemite says it doesn't support Address Book 10.4.11.
Cool!! You're welcome - but BDAqua (there's that name again!) deserves the credit (although I knew it too)
So much for a Mac's claim of 'continuity' and 'ease of use' huh?
BDAqua is a venerable friend of ours here... you will kick yourself!
ÇÇÇ -
Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works. So how can I fix this I have tried converting videos into different formats but it will not work.
Is IOS 8 really appropriate with Ipod Touch 4, if the older Ipods do not have the capability then why are we prompted to install new operating systems.
Thanks.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I have a mac pro which I recently made to share with my mac desktop. iphoto was updated on the mac pro from 8.2.1 and I can no longer open iphoto. I get an error message You can’t open your current photo library using this version of iPhoto. The only option is for me to quit. I have tried to restore with no luck. I tried reinstalling using my Application CD. Help?????
when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN -
Can't read attached files to older emails in Outlook 2010
Hello,
I have Outlook 2010 connected with MS Exchange.
I can’t read attached files to older emails than 3 months. In attached elements there are only small files and I’m not able to open them (size in Bytes!) - double click doesn't work. I've tried different solutions:
1. https://social.technet.microsoft.com/Forums/en-US/dd2869cb-5e53-4852-b0bb-15de6653db0c/dont-see-attachments-in-old-emails-on-outlook-2013?forum=outlook
2. https://social.technet.microsoft.com/Forums/office/en-US/cbd420f1-ec7f-44ae-8f78-c7613e2eabb6/unable-to-retrieve-attach-document-for-older-emails-in-outlook-2010?forum=outlook
3. Clear cache in Advanced Settings of Forms and clear C:\Users\%username%\AppData\Local\Microsoft\FORMS
None of them works
Thanks in advanceHi,
Can you read the attachments if we logon in OWA? If attachments can be read in OWA, we may try to delete the original OST file and restart Outlook to sync a new one to see the result. If still no luck, we can create a new mail profile in Control Panel to
check the result. See:
http://support.microsoft.com/kb/829918
If same issue continues in OWA, you may need to recover the data from the backup you create before.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I have a 21.5 inch desktop running OS X Mav, I had a power outage and now some of my archived files have a 2056 year on them. The computer time and date is correct. Is there a way to get them corrected?
there is no external backup
That means there is no backup at all. Shut down the computer immediately and don't turn it on again until you have an external drive (preferably two) to dedicate to backup and are ready to back up. Then see below.
Mac Basics: Time Machine backs up your Mac -
Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.
Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave
Maybe you are looking for
-
Using Fifth Gen and 20G on same Itunes software
I have both 5th Gen and 20Photo. I want to have same playlists etc on both. How do I take itunes software for 20G color and have it recognize and update 5th Gen? The computer won't recognize the 5th Gen, and I am afraid if I put in the disc that came
-
To Extend material to plant using MATERIAL_MAINTAIN_DARK .
I am tryin to extend material into plants using MATERIAL_MAINTAIN_DARK function module.Can someone please check the code below and tell me how i should modify it to work.Is BDC a better option? DATA: t_amara_ueb LIKE mara_ueb OCCURS 0 WITH HEADER LI
-
Coverflow sorting by artist...
... for classical music is just nonsense. No one might look primarily for an album sung by Domingo - I shall search for the title of the album, of course,, as I would in my paper box in earlier times... The side effect of splitting albums in as many
-
Mac mini loses wifi connection when using vnc....
I currently dont have an aextra keyboard, mouse and monitor so for short term id like to connect remotely to it. I configured the sharing settings in system preferences on my mac. Im running Mac OS X Lion 10.7 and Im using tightvnc on my windows comp
-
Have been opening files in 'normal' photoshop but it sudenly opens in Camera Raw - how do I get rid f it?