Hi, I have assigned a time capsule as backup. It does a 29GB BU everyday and then goes incremental every hour. Is it normal to BU 29GB when I have hardly changed files.

Hi,
I have assigned a time capsule and a USB harddisk as backup devices.
Usually I keep both the devices disconnected and doa backup every couple of days and usually alternate between the two.
I see that the TM does about 29GB of backup when every I connect either of my devices and then it goes hourly incremental after that.
I thought the TM backups were incremental after the 1st inital full backup.
What can I do to mitigate this.
Thanks
rjcq

rjcq wrote:
I am using Parallels for running Windows 8 mostly for using MS Access 2007, but my daily change of data is not more than 50 MB.
It's my understanding that if the virtual machine files you use are included in what Time Machine is instructed to backup, any change to the content of the VM file is considered to be a change to entire VM file. I use VMware Fusion rather than Parallels and with Fusion, the VM file is actually a folder with a special icon and inside is a collection of component files which actually make up the VM. While only some of them may be affected by using the VM, the entire VM is backed up by Time Machine. Moreover, if the backup is taking place while the VM is in use,  TM is capturing the VM in a state of flux so the internal components may not agree (the VM is so big that there might be some minutes between the beginning and end of the backup so both ends don't agree with each other; the short version is the VM may be corrupted). I don't know if Parallels saves its VM's the same way but the time it takes to backup large files shouldn't change so the risk of corruption is still there. I'd suggest that in addition to TM, you should make periodic complete bootable backups on another drive. Apart from a safety net, that also gives you the VM backup.
In Time Machine options you can exclude the folder the VM's are kept in. Try that and see if the size of the backup goes down.

Similar Messages

  • I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens and th

    I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens and then nothing happens, any ideas? I am using a PC

    This video is a great step by step tutorial.
    Photoshop: How to Download & Install New Brushes & other Presets - YouTube
    Gene

  • So, I have just about had it. For nine days now,  I have valiantly tried to move my library to an external drive. At first, I attempted to move it to my 2TB Time capsule, iTunes didn't like its new home though and moved home without telling me.

    So, I have just about had it. For nine days now,  I have valiantly tried to move my library to an external drive. At first, I attempted to move it to my 2TB Time capsule. iTunes didn't like its new home though and moved home without telling me. So then there were two libraries. I meshed them back together reluctantly and iTunes in a silent revolt, absolutely refused to use its own 'Keep Library Organized' criteria and may as well have thrown my music against the wall. Seriously, my 5 year old nephew has his computer files better managed. Then I bought a 3TB Time Capsule and you may ask yourself why??? Well, iTunes doubled in size- although when I ran apps that are designed to find duplicate iTunes files, it deleted the music I actually bought from iTunes. So then I watched as iTunes got it back. How you ask; I run a MacBook Air, iMac and Mac mini in my house - as soon as one powered up it hit the net like a sailor on leave and re-downloaded it all without abandon. I tried to keep the libraries separate, no success there. I tried to keep them unified; iTunes response was to ask me if I wanted to join iTunes Match every time I logged on to my computer and on any computer - my iTunes match song number has been as high as 24,367 and as low as 11,112. And I can't simply refuse iTunes. No one refuses iTunes. Refusal to allow iTunes Match to run through all 24000 songs again was to revoke my rights to the songs that were once part of my library. If I took a long time to decide or was visibly impatient while iTunes did its little 3 hour scan it would arbitrarily decide that music I bought from iTunes was ineligible for iTunes Match. How could that possibly be??? I am missing music, or at least iTunes tells me so by showing me that lovely exclamation point. I have tried backing up my computer to do a full system restore and start all over. Time Capsule claims I have 979 GB of data and takes its sweet time to even back up one gig (about 18 minutes) even though I can transfer files to my Time Capsule at about 1 GB every 40 seconds. I guess though performing back-ups are somewhat like government jobs; it will get done, when it gets done. The back up requirement of 979 GB is surprising though, my Mac claims that I currently occupy just about 25% of my 2TB drive. The discrepancy, who knows, but I think the solution lies somewhere in iTunes. But maybe iPhoto. But that is for another time.

    After admittedly only a quick read the one thing you don't say is how you are trying to make this move.  Most people with moving library issues do it the wrong way.  Plenty of web sites tell you how to do it the wrong way.
    If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

  • Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • Can time capsule keep backup files that are removed from my computer

    Can time capsule keep backup files that are removed from my computer? I am a photographer and have a ton of files that take too much space on my computer. I'd like to have a backup of them but keep them off of my computer. Does time capsul allow this?

    files you remove from your computer will be removed from your time machine backups sooner or later.
    better store important files on an external HD which, if connected directly to your computer and given enough space on your TC, can be backed up using time machine.

  • The internet coming from my AirPort Extreme, which is extended by an AirPort Express and my Time Capsule, is being very flaky. It is dropping and I have to reconnect every few minutes. Any solutions?

    To be more detailed, my AirPort Extreme needs to be extended by an AirPort Express, which then is extended to my personal Time Capsule. The internet drops on my MacBook Pro and other MacBook Pros randomly. We then reconnect with no problem and go on with what we were doing. The internet is fine. Always able to connect. We have Open DNS set up as well. But the flaky internet is annoying. Any ideas how to fix this?

    The primary issue that you will need to contend with is the distance between routers. 300' would be at the fringe of the signal coming from the base station located in the house which, most likely, make it too "weak" to extend/repeat with the second base station at the shop.
    There is a method to configure a relay base station between them in a Wireless Distribution System (WDS), but a WDS has two major drawbacks: 1) It can only operate in the 802.11g Radio Mode, and 2) For every base station participating in the WDS, the overall bandwidth will be cut in half .., so with a total of three (main, relay, & remote), the maximum of 54 Mbps (for 802.11g) would be more like 15-17 Mbps. If you plan on streaming HD video (either 720p or 1080p), your local wireless network may not have enough bandwidth to do so successfully.
    You proposal to run the DSL line to the shop does offer another option. Instead of running a DSL line, run an Ethernet cable between the house and the shop. You would connect one end to any of the available LAN ports on the AirPort Extreme to the Ethernet port on the AirPort Express. You can then configure both base stations into a roaming network and not have bandwidth loss of the WDS.

  • I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

    What IP address does the TC have and what IP does the computer have?
    We need more info as we really have no idea what your network looks like.
    Modem router, model, type of broadband?
    TC setup as bridge or router?
    Is the computer getting internet via the TC?
    Are you using wireless or ethernet?
    Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
    Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

  • I have a new mac book pro and and older MAC desktop.  Both are backing up to my time capsule but it is close to full (1TB).  If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers?

    I have a new mac book pro and and older MAC desktop.  Both are backing up to my time capsule but it is close to full (1TB).  If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers?  If so how do I do this?  Thanks in advance.

    If you add another Time Capsule, you can have one or both Macs backup to that new device.
    However, please note that it is not possible to have backups "carry over" seamlessly from one Time Capsule to another.
    If you add a new Time Capsule, each Mac that is backing up to the new device will make a new complete backup and then backup incrementally after the master backup is completed.

  • Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

    Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

    HaJo-aus-BS wrote:
    Since Snow-Leo time machine offers an option to verify backups, but I have found that it does not work for external disks attached by USB or FireWire.
    Yes, that's for network backups only. 
    What can I do to make sure that the backups are OK?
    You can tell if the File System (the various directories, catalogs etc.) is ok by repairing your backup drive, per #A5 in Time Machine - Troubleshooting.
    You can "spot check" whether the Time Machine "Star Wars" display seems correct.
    You can do a full system restore to another disk per #14 in Time Machine - Frequently Asked Questions, then start up from it and see if things are there and seem to work.
    You can keep "secondary" backups (always a good idea).  See #27 in the FAQ post for some suggestions.

  • I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

    Hi,
    I want to install a new Time Capsule for backups. I also have a B box2 from Belgacom for the digital TV, so how do I install?

    Just setup the TC in bridge.
    Assuming you are using Lion.. download the airport utility that has some utility.
    http://support.apple.com/kb/DL1482
    Then manual setup, internet tab, connection sharing.. off bridge mode.
    Then plug the TC into the Bbox and just use it as wireless target for your air.
    You can use wireless on Bbox if that works as well, and you might need to juggle wireless channels to get everything working. Having both set to auto is not a good idea.. set and lock channels on one or the other but best is both.. On the TC go to the airport wireless page. change it to manual.. lock the channel. You can use 1, 6, 11 or 13 in ETSI..

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • Using Time Capsule for Backup Drives, Storage, and an iTunes Server?

    I have a 500 GB Time Capsule to accompany my Macbook. The Time Capsule connects to my household's existing wifi network and is not connected by a cord to my computer. I went through a great deal of difficulty setting it up, but now it's time to start using it. I just canceled my off-site backup service, so I really need and appreciate your help and advice.
    I want my Time Capsule to perform a few different tasks:
    1) Time Machine backups for TWO different user accounts on my Macbook
    2) Additional file storage
    3) iTunes server
    Is this possible? If so, how would I accomplish it?

    1) Time Machine backups for TWO different user accounts on my Macbook
    Time Machine backs up the ENTIRE hard drive. It is not user dependent.
    2) Additional file storage
    Yes
    3) iTunes server
    You can use it to store your iTunes library. However iTunes will need to run on your MacBook to play the music.

  • The new firefox twitter app is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? I am working on an iMac - if that is causing the problem ...? Thanks.

    The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.

    Eustace, thank you so much for writing back.  I will try what you suggested!!
    thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport).  I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault.  apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
    Then, I bought Time Capsule and starting backing up to that instead.  I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
    anyway - that's THAT sad story.  I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed. 
    I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever.  I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!

  • How to monitor Time Capsules that backup multiple laptops?

    Hello,
    I have two 3Tb Time Capsules that backup 3 laptops each. Those laptops travel and are not always plugged into our network. I'd like to have a way to know if a laptop hasn't been backuped since n days.
    Is there a way to do that?
    Can Remote Desktop be of any help for that?
    Thanks for your help!

    You could write a script that looks at the directory in Time Capsule and see what the last updated file for each Mac's folder is.
    If this is a business setup and you start to run out of Time Capsule space you may want to look at a NAS and moving Time Machine backups to that instead of Time Capsule.
    You could then easily see the access logins for the backups as well as get encrypted backups, ability to recover if the backup drive fails, etc.

  • Can I use the time capsule as backup and hard disk at the same time?

    Hi.
    I want to buy a time capsule.
    I wondered, if I can use the time capsule as backup (over time machine) and as a hard disk at the same time?
    If I buy the 2TB time capsule, I wanted to use 1TB for the backup and 1TB for hard disk.
    Is this possible?
    Best wishes
    Sophie

    It is not recommended.. the problem being anything stored on the TC only is not backed up and cannot be backed up by the TC itself or Time Machine. So what are you going to do about back.. the TC can and do die suddenly.. and the cost of recovery can be huge.
    See Q3 here for the semi-right way to do it if you must.
    http://pondini.org/TM/Time_Capsule.html
    You can plug a USB drive into the TC and use that for files.. but note, its speed is poor.. fine for wireless as wireless is even slower but you will really notice it if you expect the drive to be as fast as the internal.. it will be a fraction of the internal drive speed. 1/2 write and 1/3 read aprox.
    See http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7

Maybe you are looking for

  • MM Report for Reorder and lead time

    Hi, Can anyone suggest me a report that can show information by materail such as min./max. quantity, re-order or safety stock, and replensihment lead time. Thanks Atif

  • Hiding Fields in Adobe Form

    Hi, I have some fields in my form that i want to hide. I added in some javascript into the button-click event. When previewing in the Adobe LiveCycle Designer, the fields are hidden successfully,but  when i press F8 button the fields are not able to

  • Changing content type of xml file to pdf

    Hello, I have an xml file (extension is *.xdp) which can locally be opened with Adobe Reader and displays as a regular pdf file. Adobe has a technology that allows xml to be merged with a pdf shell, and thus populating the pdf file with the values re

  • Intransit Inventory in OBI

    Hello All, I am an end user with very limited OBI experience. Is anyone using OBI to report on Intransit Inventory? We use OBI today to report on hand inventory but we do not have Item and Quantity detail information available for goods intransit bet

  • Migrating struts application from 10.1.2 to 10.1.3.1

    I've tried migrating my struts application from using JDev 10.1.2 to 10.1.3.1. When I try to open up the struts-config.xml file, I get a Java runtime exception error. I am using JDK 5.0.60.5. I'm not sure how to fix this.... Message BME-99004: A Java