HI. I have been receiving an error message recently when opening itunes the message says "itunes has stopped working. Windows will close theprogram and notify when a solution has been found." Anyone able to help?
I've checked the problem reports and solutions on my laptop and this is what popped up.
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: iTunesMobileDevice.dll
Fault Module Version: 503.2.0.1
Fault Module Timestamp: 4ea63899
Exception Code: c0000005
Exception Offset: 0003a5d0
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Any help you could give would be awesome!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2
Similar Messages
-
When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."
I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
HT4972 after i wait for about 40 minutes a error message says network has timed out....help me...
I wanted to update my ipod 4 gen. from ios 4.1 to 5,,,but after i click update and after its starts downloading the ipod software update and after waiting for 40 minutes a error message saying network has timed out appears....i tried turning off the firewalls but it did not work....help me pls,,,
Did you also disable the computer's antivrus program?
-
I get a message every time I truro sync it says iTunes has stopped working windows will contact you if a solution is found.
I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.
-
Both when I open Encore as a standalone program, and when I try and export my work via Adobe Link to Send to Encore, I get the same error message - "Adobe Encore has stopped working. Windows will close the program. Help would really be appreciated. Thanks.
Now that is impressive Stan, thankyou! So simple ... I don't suppose you know why the "build" button is greyed out do you? Don't worry if you don't have more "magic dust" at your fingertips, I'll re-check my settings again, and again ... Thanks for your help. Doreen.
-
i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?
It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question" -
I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?
What does the error message say? (Precise text, please.)
-
I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.
Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC
-
When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
I receive an error message saying cannot backup becasue backup cannot be saved when i am trying to backup my iphone 4s
No, I'm just backing up to my PC. I've never backed up to this computer (its my laptop). I've normally use my desk top but it has crashed. It did this to my 3GS but now it's doing it to my new 4s.
-
I'm trying to activate iMessage on my iPad 2 - I keep receiving an error message saying I need to check my connection even though I am already connected through wi-fi and the connection is strong. Please advise.
Possibly there's a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required. -
I'm using an earlier version of Firefox (v. 3.6.18), downloaded the add-on but it will not open. I received a error message saying safari can't open "firefox_sync-1.7-sm+fn+fx.xpi" because no available application can open it.
"Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies -
I am receiving an error message "an application has made an attempt to load the C runtime library incorrectly
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
What happened? Tried to open Elements 8 and error message says "Photoshop has stopped working."
The Welcome screen somes up but then fades and error message says "Photoshop has stopped working." Then Windows closes the program.
I shut down the computer, waited, then did restart, clicked on PSE, and the same message came up again. That was last night, thought I might get a message this morning, but same thing happened again. I'm trying to not panic - this is all new to me.
Any help welcome!If you have not updated to the most current version, you might try that.
-
My iTunes suddenly stopped working. I uninstalled it and reinstalled it twice. It gives me an Error message 7 or windows error message 126. Any ideas of why this is happening?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
How do I save photos stuck in the cloud to my computer?
About a month ago I accidentally threw my phone in the wash, killing it. When I bought my new phone the guy failed to mention that I could restore everything back to what it was and by the time I discovered I could, I'd already gotten myself knee de
-
How to generate sequence no increased with an increment in o/p file name
Hi all, I am doing a file to file scenario in which my output file name consists of a sequence number which is increased by fixed increment.i thought of proceeding with variable substitution by writing one udf involving Dynamic Configuratio
-
Standby DB 9i and Windows 2000
Hi all, I´ve already implemented Managed Standby DB 8.1.6 on Linux and it´s working fine! I´d like to hear from you about implementation of Standby DB 9i on Windows... Is it too complicated? Are there many problems? Or it works ok? I really will appr
-
Wireless adsl router recommendations...best range.
Im having the same horrible issue's everyone else is complaining about...had a new airport car & new logic board installed but still having issue's. I can't seem to get anymore than 10 meters away from the adsl router without the signal getting so lo
-
EUL_EXP_ID constraint (Discoverer v3.1)
Recently I have troubles with adding or copying new folders/joins into the End User Layer. The DBMS gives a ORA-00001 violation error, because Discoverer tries to insert a record with a key that already exists. Is someone familiar with this bug?