Hi i m uding i phn bt my bt my wifi conectivity is. ery short for another i phne s so what can i do plz help me

hi. im using i phn 4 bt my wifi conectvity range is very short another i phn so plz hel help me and what can i do solve my prob thnk u

you can redownload purchased apps free of charge. see _*How to redownload purchased apps from the App Store*_.
JGG

Similar Messages

Hello sir, Hello sir. Plz clarify me... My frnd have iphone 5s sealed pack. He purchased it from uk..he told me the phone is unlocked..but i have doubt phone is locked or unlocked..plz help me how can i know phn is locked or unlock???

Hello sir, Hello sir. Plz clarify me... My frnd have iphone 5s sealed pack. He purchased it from uk..he told me the phone is unlocked..but i have doubt phone is locked or unlocked..plz help me how can i know phn is locked or unlock???

hellow sir i have iphone 3gs but its unofficely unlock .
can i update my iphone ?

HT201441 i hve forgotten my apple id and password and my phn is been already erased.i did a new software and to activate it tells me to put my apple id which i hve forgotten plz help me fast i am stuck in this problem

i hve forgotten my apple id and password and my phn is been already erased.i did a new software and to activate it tells me to put my apple id which i hve forgotten plz help me fast i am stuck in this problem

Welcome to the Apple Community.
There is nothing you can do without your Apple ID. Try here:
iForgot.com
and click on the 'forgot my ID link.

Plz help me my iphone 4 is lost plz damage my phn

My phn is lost plz damage my phn

If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

TS3694 hello when i was trying to restore my phn im getting an error 1015 what shuld i do now plz help me out

plz help me out for error 1015

Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Plz tell me that my 4s is swap or not....i cnt find any information coz i give my phn to other prsn plzzz help me my phn exp in march 14

my 4s ....i wnt to knw that my phn is swap or not...coz i give my phone to other prsn hand .....plz help me my phn exp in march 14...plzzzzzz help thaxs
<Personal Information Edited by Host>

It's possible that when you dragged those "non-iTunes" files on the iPod to the Trash, you did not empty the Trash. At least on a Mac, if you do that, the files are still on the iPod's disk (not visible) taking up space as "Other." You may need to connect the iPod with disk mode enabled, then empty the Trash.
Or, if you don't mind erasing it completely, you can do a Restore on the iPod in iTunes. The Restore button is on the iPod's Summary screen in iTunes. That will erase the iPod, re-install its software, and set it to default settings. That should clear up the data under "Other."

If Quality notification as follow up action fails

Dear all
I have a situation where Quality notification is configured as a Follow up action once the UD is made.
So I am getting Create notification screen once UD is filled and SAVE button is clicked.
In Case some wrong data is entered in the Create notification screen and I am coming out of Notification without saving the notification.
The status of the inspection lot is getting flipped to UDed as expected.
But is there any setting where i can define if the Followup action is not successful( Notification not created), then wont make the UD of Inspection lot also. (OR some user status will get updated saying Notif not created etc..)

Hi Navdeep,
Thanks to Anand for his correct feedback.
Please note that as per standard SAP, unless and otherwise there is a defect created, there can't be a 1:1 link with inspection lot with the notification, though in the notification header table there is a placeholder available (QMEL-PRUEFLOS) to capture this inspection lot field. You are trying to use a follow-up action wherein, after UD you are always creating a notification based on business case. I believe, the FM you are using in follow-up action, is not presently populating QMEL-PRUEFLOS. So there can't be a link to find out when there is failures in notification creation, but UD happening successfully.
You can try out the below approach -
Approach - 1
During the UD save process, there should be additional checks happening. Ask the follow-up FM to update QMEL-PRUEFLOS or TEXT field with inspection lot for all successful notification creation and UD update, and send a confirmation email to approver or task processing partners, or the UD processing user ID (This email part can be skipped in case if this is not required). In case of any failures in notification creation at save, it should truncate the UD save process too and send a message to UD processing user for this failure.
Approach - 2
You can create a batch job running at the background to validate for which inspection lot there is no notification created, even though UD is done. Send a mail to the UD processing user to create a notification, as that is not created. User can then create it manually it by updating TEXT field in notification in foreground.
Thanks,
Arijit

Jrockit crashes due to outofmemory and illegal memory acces

Hello,
We have been using jrmc-3.1.2-1.6.0 and lately we are seeing JVM crashes after every couple days. Note: We have been seeing these crashes recently , for last 1 year we did not see such crashes.
Following are different issues that we have seen over last few days:
1. Crash due to illegal memory access
2. Crash due to out of memory error
3. Sever becoming unresponsive/Idle
For illegal memory access and out of memory crashes, there was jRockit dump file created and Dump file seems to be pointing at Jrockit libjvm.so module for the exception/crash.
Any help would be appreciated!
*** Dump for Illegal Memory Access
Error Message: Illegal memory access. [54]
Signal info : si_signo=11, si_code=1 si_addr=0x10
Version : BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32
CPU : Intel Core i7 (HT) SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Core Intel64
Number CPUs : 4
Tot Phys Mem : 12762509312 (12171 MB)
OS version : Red Hat Enterprise Linux Server release 5.6 (Tikanga)
Linux version 2.6.18-164.15.1.el5PAE ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 1 11:14:09 EST 2010 (i686)
Thread System: NPTL
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -Djava.util.logging.config.file=/usr/local/springsource/tcServer-6.0/zplus/conf/logging.properties -Djava.util.logging.manager=com.springsource.tcserver.serviceability.logging.TcServerLogManager -Xmx2048m -Xms2048m -Djava.rmi.server.hostname=300714-web8.echovox.com -XgcPrio:pausetime -DTERRACOTTA_URL=338449-web10.echovox.com:9510,338450-web11.echovox.com:9510 -Dapp_version= -Xmanagement -Dcom.sun.management.jmxremote.port=7091 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Dehcache.monitor.enabled=True -Djava.endorsed.dirs=/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A/endorsed -Dcatalina.base=/usr/local/springsource/tcServer-6.0/zplus -Dcatalina.home=/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A -Djava.io.tmpdir=/usr/local/springsource/tcServer-6.0/zplus/temp -Dsun.java.launcher=SUN_STANDARD org.apache.catalina.startup.Bootstrap start
java.home : /usr/local/jrmc-3.1.2-1.6.0/jre
j.class.path : :/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A/bin/bootstrap.jar
j.lib.path : /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit:/usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386:/usr/local/jrmc-3.1.2-1.6.0/jre/../lib/i386
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit:/usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386:/usr/local/jrmc-3.1.2-1.6.0/jre/../lib/i386
LD_PRELOAD : <not set>
LD_ASSUME_KERNEL: <not set>
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : Good; no memory allocations have failed
GC Strategy : Mode: pausetime. Currently using strategy: genconcon
GC Status : OC currently running, in phase: marking. This is OC#2905.
: YC is not running. Last finished YC was YC#100045.
OC History : Strategy genconcon was used for OC#2776.
: Strategy genconpar was used for OC#2777 to OC#2781.
: Strategy genconcon was used for OC#2782 to OC#2783.
: Strategy genconpar was used for OC#2784 to OC#2790.
: Strategy genconcon was used for OC#2791 to OC#2905.
YC History : Ran 1 YCs before OC#2901.
: Ran 0 YCs before OC#2902.
: Ran 1 YCs before OC#2903.
: Ran 0 YCs before OC#2904.
: Ran 2 YCs before OC#2905.
YC Promotion : Last YC successfully promoted all objects
Heap : 0x8b00000 - 0x88b00000 (Size: 2048 MB)
Compaction : 0x49b00000 - 0x51b00000 (Current compaction type: internal)
NurseryList : 0xaf67e18 - 0x8226c988
KeepArea : 0x817031e8 - 0x8226c988
NurseryMarker: [ 0x80d031f0, 0x817031e8 ]
CompRefs : References are 32-bit.
Registers (from ThreadContext: 0x96b75420 / OS context: 0x96b7551c):
eax = 00000000 ecx = ffffffcc edx = 8b80eb78 ebx = 8b80eb78
esp = 96b75814 ebp = 96b75960 esi = 96b75a48 edi = 00000000
es = 0000007b cs = 00000073 ss = 0000007b ds = 0000007b
fs = 00000000 gs = 00000033
eip = b7d3a397 eflags = 00210296
Loaded modules:
(* denotes the module causing the exception)
08048000-08058233 /usr/local/jrmc-3.1.2-1.6.0/jre/bin/java
b7f24000-b7f2462b /usr/local/jrmc-3.1.2-1.6.0/jre/bin/java
00754000-00768f17 /lib/libpthread.so.0
006b2000-006d8a23 /lib/libm.so.6
006ab000-006ad0fb /lib/libdl.so.2
00550000-006a2723 /lib/libc.so.6
00531000-0054b4f7 /lib/ld-linux.so.2
b7c46000-b7e9fea7 */usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit/libjvm.so
007a3000-007a9ebf /lib/librt.so.1
b722f000-b723839b /lib/libnss_files.so.2
b7118000-b71229bb /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libverify.so
b70f3000-b7115f57 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libjava.so
007ae000-007c27a7 /lib/libnsl.so.1
b723e000-b7243ef0 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/native_threads/libhpi.so
b59f0000-b59fe3e4 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libzip.so
b5805000-b580a666 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libmanagement.so
b5224000-b5236a18 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libnet.so
b723c000-b723c6ad /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/librmi.so
b2d42000-b2d45c2f /lib/libnss_dns.so.2
b2d2e000-b2d3d74b /lib/libresolv.so.2
b2d4a000-b2d503a4 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libnio.so
b1f9d000-b1fc5857 /usr/local/springsource/tcServer-6.0/zplus/temp/tmpSigarJars841342613926113968186721535772/libsigar-x86-linux-1.6.4.so
Stack:
(* marks the word pointed to by the stack pointer)
96b75814: b7cbce41* 00000000 006772e2 b04dbab8 006a4ff4 00000030
96b7582c: 00000002 96b758a0 00000000 00000000 00010000 0061eea8
96b75844: b7e48510 00010000 00000000 0061eeb9 b7d8f0f8 20000000
96b7585c: 00010000 00000000 00004022 ffffffff 00000000 96b75890
Code:
(* marks the word pointed to by the instruction pointer)
b7d3a364: c0a108ec e8b7f0fe ffffffa0 f0fed4a1 ff96e8b7 b8c9ffff
b7d3a37c: 00000001 900debc3 90909090 90909090 90909090 8be58955
b7d3a394: 8b5d0845* d2851050 0fc0950f b60fc0b6 768dc3c0 27bc8d00
b7d3a3ac: 00000000 53e58955 0134ec81 9d8d0000 fffffee8 04245c89
"RMI TCP Connection(idle)" id=440712 idx=0x7c4 tid=825 lastJavaFrame=0x96b75ecc
Stack 0: start=0x96b54000, end=0x96b78000, guards=0x96b59000 (ok), forbidden=0x96b57000
Thread Stack Trace:
at jniExceptionCheck+7()@0xb7d3a397
at cmgrGenerateCode+260()@0xb7cbe024
at generate_code2+937()@0xb7da6c99
at generate_code+97()@0xb7da6f11
at get_runnable_codeinfo2+275()@0xb7da74c3
at call_java+317()@0xb7d42f0d
at jniInvoke+110()@0xb7d451be
-- Java stack --
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeConstructorAccessorImpl.newInstance0(Ljava/lang/reflect/Constructor;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun/reflect/DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)[optimized]
at java/lang/reflect/Constructor.newInstance(Constructor.java:513)[optimized]
at java/lang/Class.newInstance0(Class.java:355)[inlined]
at java/lang/Class.newInstance(Class.java:308)[optimized]
at sun/reflect/MethodAccessorGenerator$1.run(MethodAccessorGenerator.java:381)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:233)[inlined]
at jrockit/vm/AccessController.doPrivileged(AccessController.java:241)[inlined]
at sun/reflect/MethodAccessorGenerator.generate(MethodAccessorGenerator.java:377)[optimized]
at sun/reflect/MethodAccessorGenerator.generateMethod(MethodAccessorGenerator.java:59)
at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:28)
at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[inlined]
at java/io/ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)[inlined]
at java/io/ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1461)[optimized]
at java/io/ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)[inlined]
at java/io/ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)[inlined]
at java/io/ObjectOutputStream.writeObject(ObjectOutputStream.java:326)[optimized]
at sun/rmi/server/UnicastRef.marshalValue(UnicastRef.java:274)
at sun/rmi/server/UnicastServerRef.dispatch(UnicastServerRef.java:315)
at sun/rmi/transport/Transport$1.run(Transport.java:159)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:255)[optimized]
at sun/rmi/transport/Transport.serviceCall(Transport.java:155)
at sun/rmi/transport/tcp/TCPTransport.handleMessages(TCPTransport.java:535)
at sun/rmi/transport/tcp/TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun/rmi/transport/tcp/TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java/util/concurrent/ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)[inlined]
at java/util/concurrent/ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)[optimized]
at java/lang/Thread.run(Thread.java:619)[optimized]
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
Extended, platform specific info:
libc release: 2.5-stable
Elf headers:
libc ehdrs: EI: 7f454c46010101000000000000000000 ET: 3 EM: 3 V: 1 ENTRY: 00565fe0 PHOFF: 00000034 SHOFF: 0019ccbc EF: 0x0 HS: 52 PS: 32 PHN; 10 SS: 40 SHN: 75 STIDX: 74
libpthread ehdrs: EI: 7f454c46010101000000000000000000 ET: 3 EM: 3 V: 1 ENTRY: 00758850 PHOFF: 00000034 SHOFF: 00021474 EF: 0x0 HS: 52 PS: 32 PHN; 9 SS: 40 SHN: 40 STIDX: 39
libjvm ehdrs: EI: 7f454c46010101000000000000000000 ET: 3 EM: 3 V: 1 ENTRY: 0004c3a0 PHOFF: 00000034 SHOFF: 012c9a58 EF: 0x0 HS: 52 PS: 32 PHN; 4 SS: 40 SHN: 29 STIDX: 26
* If you see this dump, please go to *
* http://edocs.bea.com/jrockit/go2troubleshooting.html *
* for troubleshooting information. *
===== END DUMP ===============================================================
****** Dump for OutOfMemory error
Error Message: Out of memory [68]
Signal info : si_signo=11, si_code=1 si_addr=(nil)
Fatal Error : Reference Iteration refIterInit src/jvm/code/runtime/refiter.c:167
Version : BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32
CPU : Intel Core i7 (HT) SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Core Intel64
Number CPUs : 4
Tot Phys Mem : 12762509312 (12171 MB)
OS version : Red Hat Enterprise Linux Server release 5.6 (Tikanga)
Linux version 2.6.18-164.15.1.el5PAE ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 1 11:14:09 EST 2010 (i686)
Thread System: NPTL
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -Djava.util.logging.config.file=/usr/local/springsource/tcServer-6.0/zplus/conf/logging.properties -Djava.util.logging.manager=com.springsource.tcserver.serviceability.logging.TcServerLogManager -Xmx2048m -Xms2048m -Djava.rmi.server.hostname=300714-web8.echovox.com -XgcPrio:pausetime -DTERRACOTTA_URL=338449-web10.echovox.com:9510,338450-web11.echovox.com:9510 -Dapp_version= -Xmanagement -Dcom.sun.management.jmxremote.port=7091 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Dehcache.monitor.enabled=True -Djava.endorsed.dirs=/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A/endorsed -Dcatalina.base=/usr/local/springsource/tcServer-6.0/zplus -Dcatalina.home=/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A -Djava.io.tmpdir=/usr/local/springsource/tcServer-6.0/zplus/temp -Dsun.java.launcher=SUN_STANDARD org.apache.catalina.startup.Bootstrap start
java.home : /usr/local/jrmc-3.1.2-1.6.0/jre
j.class.path : :/usr/local/springsource/tcServer-6.0/tomcat-6.0.20.A/bin/bootstrap.jar
j.lib.path : /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit:/usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386:/usr/local/jrmc-3.1.2-1.6.0/jre/../lib/i386
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit:/usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386:/usr/local/jrmc-3.1.2-1.6.0/jre/../lib/i386
LD_PRELOAD : <not set>
LD_ASSUME_KERNEL: <not set>
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : 1 memory allocations have failed
: First failure was a mmMalloc of 20 bytes
: Last failure was a mmMalloc of 20 bytes
GC Strategy : Mode: pausetime. Currently using strategy: genconpar
GC Status : OC is not running. Last finished OC was OC#1945.
: YC is not running. Last finished YC was YC#90824.
OC History : Strategy genconpar was used for OC#1745 to OC#1755.
: Strategy genparpar was used for OC#1756 to OC#1757.
: Strategy genconpar was used for OC#1758 to OC#1938.
: Strategy genparpar was used for OC#1939 to OC#1940.
: Strategy genconpar was used for OC#1941 to OC#1945.
YC History : Ran 1 YCs before OC#1941.
: Ran 6 YCs before OC#1942.
: Ran 4 YCs before OC#1943.
: Ran 6 YCs before OC#1944.
: Ran 4 YCs before OC#1945.
: Ran 5 YCs since last OC.
YC Promotion : Last YC successfully promoted all objects
Heap : 0x8100000 - 0x88100000 (Size: 2048 MB)
Compaction : 0x64100000 - 0x68100020 (Current compaction type: internal)
NurseryList : 0x8214640 - 0x84438f20
KeepArea : (no keeparea in use)
NurseryMarker: [ 0x827bfd10, 0x83996a00 ]
CompRefs : References are 32-bit.
Registers (from ThreadContext: 0x2a96c20 / OS context: 0x2a96d1c):
eax = 00001267 ecx = 00000000 edx = 00000042 ebx = b7eb0de4
esp = 02a97010 ebp = 02a97028 esi = 00000044 edi = 02a97078
es = 0000007b cs = 00000073 ss = 0000007b ds = 0000007b
fs = 00000000 gs = 00000033
eip = b7cfca45 eflags = 00010206
Loaded modules:
(* denotes the module causing the exception)
08048000-08058233 /usr/local/jrmc-3.1.2-1.6.0/jre/bin/java
b7f44000-b7f4462b /usr/local/jrmc-3.1.2-1.6.0/jre/bin/java
00754000-00768f17 /lib/libpthread.so.0
006b2000-006d8a23 /lib/libm.so.6
006ab000-006ad0fb /lib/libdl.so.2
00550000-006a2723 /lib/libc.so.6
00531000-0054b4f7 /lib/ld-linux.so.2
b7c66000-b7ebfea7 */usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/jrockit/libjvm.so
007a3000-007a9ebf /lib/librt.so.1
b724f000-b725839b /lib/libnss_files.so.2
b7138000-b71429bb /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libverify.so
b7113000-b7135f57 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libjava.so
007ae000-007c27a7 /lib/libnsl.so.1
b725e000-b7263ef0 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/native_threads/libhpi.so
b5972000-b59803e4 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libzip.so
b5803000-b5808666 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libmanagement.so
b51a8000-b51baa18 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libnet.so
b725c000-b725c6ad /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/librmi.so
b2dae000-b2db1c2f /lib/libnss_dns.so.2
b2d9a000-b2da974b /lib/libresolv.so.2
b47ae000-b47b43a4 /usr/local/jrmc-3.1.2-1.6.0/jre/lib/i386/libnio.so
b1ec7000-b1eef857 /usr/local/springsource/tcServer-6.0/zplus/temp/tmpSigarJars551489478996731294326116727652638760/libsigar-x86-linux-1.6.4.so
Stack:
(* marks the word pointed to by the stack pointer)
02a97010: b7ec5040* 00000200 b7eb0de4 02a97078 02a97078 02a97034
02a97028: 02a97048 b7e78894 00000044 b7eb0de4 02a97078 00000001
02a97040: 02a970d0 02a97110 02a97068 b7e788bf 00000044 b7eb0de4
02a97058: 02a97078 b666692a 00000001 02a970d0 02a97088 b7e2147a
Code:
(* marks the word pointed to by the instruction pointer)
b7cfca14: 4c892074 458b0824 2404c710 b7ec5040 0c244489 000200b8
b7cfca2c: 24448900 b5dae804 01b80017 a3000000 b7ec5024 001267b8
b7cfca44: 0000a300* 04c70000 00003f24 bdcae800 768d0017 27bc8d00
b7cfca5c: 00000000 e589fc55 53c03157 b9e87d8d 00000004 00c0ec81
"tomcat-http--119" id=24059 idx=0x60c tid=8771 lastJavaFrame=0xfffffffc
Stack 0: start=0x2a74000, end=0x2a98000, guards=0x2a79000 (ok), forbidden=0x2a77000
Thread Stack Trace:
at dumpForceDump+117()@0xb7cfca45
at vmFatalErrorMsgV+84()@0xb7e78894
at vmFatalErrorMsg+31()@0xb7e788bf
at fatalError+42()@0xb7e2147a
at refIterInit+111()@0xb7e215bf
at trProcessLocksForThread+41()@0xb7e300f9
at get_all_locks+106()@0xb7d476ca
at javaLockConvertLazyToThin+99()@0xb7d477b3
at javaLockUnmatchedLock+802()@0xb7d488f2
at jniMonitorEnter+48()@0xb7d66cf0
at vmtiDetachFromThreadObject+85()@0xb7d9ec85
at tsiThreadStub+147()@0xb7d9f0f3
at ptiThreadStub+18()@0xb7e0e1d2
at start_thread+226()@0x759832
at __clone+94()@0x62245e
-- Java stack --

From the command-line (-Dehcache.monitor.enabled=True) you are using some form of caching.
The out-of-memory occured as the JVM was unable the allocate an object: C Heap : 1 memory allocations have failed
Could you check how the live data set is going (or the memory leak detector)
Some concerns with regard to tune a JVM that runs a cache can be found here: http://middlewaremagic.com/weblogic/?p=7083
Note that the example given discusses Coherence, but can be adopted for another caching mechanism as well.

Problem Deploying Creative Suite 5.5 to Windows 7 64 Bit

Hi,
I`ve been looking into deploying CS 5.5 Design Premium to our teaching machines for the last few days now.
Finding it very difficult to get the suite to deploy.
Have used the Application Manager Enterprise Edition to package the software and then put this on our network.
I`m then using windows group policy to deploy the software to our workstations.
Unfortuantely io`m finding that the install is constantly failing.
Looking at the log files I`m finding entries like these. What do you suggest?
----------- Payload: {24586955-A50A-4E76-AF2C-7F8EB833FBB1} Adobe Illustrator CS5.1_AdobeIllustrator15_1en_GBLanguagePack 15.1.0.0 -----------
FATAL: DS003: Cannot extract '\\devdomain\ude\Apps\Adobe\Creative Suite\Adobe CS5.5 Design Premium\Build\\Setup\payloads\AdobeIllustrator15_1en_GBLanguagePack\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{24586955-A50A-4E76-AF2C-7F8EB833FBB1}'. Error: Error 64 The specified network name is no longer available.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_GBLanguagePack: Install failed
FATAL: DS003: Cannot extract '\\devdomain\ude\Apps\Adobe\Creative Suite 5.5\Adobe CS 5.5\Build\\Setup\payloads\AdobeFlash11.5-en_USLanguagePack\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{970C9F3A-39C5-480B-BE51-7C70AB9F84DB}'. Error: Error 64 The specified network name is no longer available.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash CS5.5_AdobeFlash11.5-en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Flash CS5.5: Failed due to Language Pack installation failure
Many Thanks
Mike Beales
Software Support
University of Southampton
England

Hi Mike,
I'm also trying to deploy the package in an Education environment. So far we've worked out that the path tends to eat up quite a length and ideally should be reduced. Out deployment tool at the moment is Altiris, and there's a call in with them to fix a specific problem with that.
As a result we copy the package locally and install it from a slightly shorter directory structure. Also of note - to deploy and run the package:
You'll need to SHIM the java.cpl files and Adobe Extension manager exe, using the Application Compatibility Toolkit from Microsoft (or google Manifest + Windows 7). The SHIM fix you're looking for is RunAsInvoker as far as I can work out.
Unfortunately the package we've created still doesn't deploy 100%, the set-up.dat file deep inside the package seems to work and starts creating shortcuts etc but then fails at some point later in the installation. We're still investigating what's gone wrong as it then rolls everything back.

Problem in downloading and installing application ...

hey
m havng problem in downloading and installing application on mah x2-01 . many times i tried to dwnload whatsapp to mah phn and if the application isz downloaded thn while verifyng the no. it says error unitterupted problem in contacting the server . so knw wht shud i do . i hav also restrore mah phn thn too. plz help me

You may verify first your mobile number from this link. Make sure to sign in and under Mobile numbers, click Verify now.

N8 camera button not working

mmtoday my nokia n8 had problm↲its camera button had stopd working↲by presing camera button it only focuses the view but doesnt c5ick the photo↲↲plz help me em really scared↲my phn is in warranty wil nokia wil repair it for free

PsychoDan wrote:
Try turning the phone off and on again. Just had the camera button on mine stop working at all. and this fixed my problem. As the button still does something. It is unlikely that it is hardware issue so changing the phone should not be necessary. Probably is an operating system glitch that you ran into. If you know how to repeat the problem then it would be useful to post a bug report and then Nokia can fix it! Chances are you don't though and have better things to do than look for it!
Same here - worked for a first three weeks then quit! Seems like in general the phone has started getting slower and delayed over time, especial with touchscreen navigation, so I suspect it's a software issue.
Button won't turn on camera on anymore and only does autofocus but not shoots....
Anybody has found a workaround?
It seems the on/off doesn't work but it does seem to me if you let the battery completely drain and then recharge and restart, a number of other functions does better....
Did anyone call Nokia for this? What did they say?

JNI - make dll (fatal error LNK1181)

I make a simple jni program ( it just print "Hello World" )
but, when I compile this program I got a LINK error
D:\JavaProjects\HW>cl -I c:\java\jdk1.3.1_01\include -I c:\java\jdk1.3.1_01\incl
ude\win32 -I c:\java\jdk1.3.1_01\cinclude -LD helloworldimp.c -Fe hello.dll
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 12.00.8804 for 80x86
Copyright (C) Microsoft Corp 1984-1998. All rights reserved.
Command line warning D4024 : unrecognized source file type 'hello.dll', object f
ile assumed
helloworldimp.c
Microsoft (R) Incremental Linker Version 6.00.8447
Copyright (C) Microsoft Corp 1992-1998. All rights reserved.
/dll
/implib:helloworldimp.lib
/out:helloworldimp.dll
helloworldimp.obj
hello.dll
LINK : fatal error LNK1181: cannot open input file "hello.dll"
anyone knows this error? then, plz help me
thanx

using VC++6.0?
I got the same problem when trying out the tutorial, check MSDN library on this error, in the C++ source code, you should change all pointers refering to java to how MSDN tells you is microsoft standard, the tutorial c code, maybe works correctly with other compilers or older versions of VC++ compilers.
unfortunatly I lost my source code, only having the .dll file left otherwise I could show you

Nokia Lumia 521 problems

I'm having a few issues with my phone and I want to know if this is normal behavior for this type of phone. I noticed that when I turn my phone off the screen seems to stay on just with nothing but a blank screen and this only happens sometimes so this is why I'm concerned

I can relate to having problems with ur Nokia phn..i purchased the Nokia Lumina 521 3 months ago, the first 30 days was great, I even talked a close friend into buying one a cpl days after I bought nine..after the 30 days past I noticed my phn productivity slowing down. I did the troubleshoot and cleaned out my aps n storage. I was wondering if I was the only one having the troubles with my phn n asked my friend what she thought. She began telling me how pissed she was with this product low n behold we were both having the same issues here almost 2 months n the problems grew for both mine and hers. The phn began to get altogether slower until still today it freezes up on n off thru use, it closes out aps or sights I am in without warning and shuts itself off. It is very frustrating to have expected so much more from a highly recommended phn. I purchased a 2 yr warranty plan upon purchase of the phn, I filed a claim yesterday and found out yes my warranty covers these issues but I have to send the phone in and b without a phone for 10-30 days until repairs can b made. I am outraged at the fact that due to factory default on theses Nokia Lumina 521 phns I am being asked to go without a phn! After all of the problems I have had with this horrid phn I wld have thought a replacement phone wld b offered during repairs or even to be offered an upgraded version of the phone my friend was also told the same thing about her phn. Sadly she was forced to buy a new phone because she runs a business and needs phone accessibility for her wrk. I just expected way more out of the Nokia company to right there mistakes. I do not think the problems u r experiencing with ur Nokia phn is normal and I think it wld b good for u to address the problems about the phn with the manufacturing company and ask for a replacement! An upgraded version for all the disruption and trouble with the phns. I wld also encourage anyone else that is having issues with there Nokia phn to bring it to attention so ppl dnt have to continue to b ripped off or go thru these problems if its addressed it is possible for the company to fix the problem and improve there devices. Thanks for letting me rant n rave, just a very angry customer and feel very ripped off!

Pmnt block changed when amount split use - how this funct. set?

Hi experts,
when i use bookmark - amount split in tcode mir7 bookmark Payment changed, a specialy pmnt block changed. I set Maintain Terms of Payment with Default value for the payment blocking key = N. But when i fill amount split payment blocking key change to released for payment. What this function logic and where this one can i set? I want that pmnt block dont change when function amount split ude.
thnx very much for your answers
Laco

Hi,
thnx for your answerd.
Day limit was not set in T052, and items block dont use in mir7.
Use only header pmnt block, and use amount split to in header. Payment term fill in bookmark Amount split when this use of course.
I try this in many other customers what have SAP ECC 6.0 and tehe result is same. When i fill header invoice in mir7 in bookmark Paymant pmnt block proposed N - block workflow approval and than i go to bookmark Amount split and pliting amont and fill paymant terms and than i back to bookmark Paymant and pmnt block change - released for payment. Why?! What this governed? PO in this time dont fill.
thanx very much.
L.

Oracle Spool Fixed Width

Hi All,
I'm trying to spool records from my Oracle table into a fixed width text file. As you'll see below, I'm using the RPAD function to set the maximum width for my columns but for some reason the spool doesn't recognize the RPAD function and just uses some other arbitrary fixed width. Here's the code that I'm using:
Spool on
SET PAGESIZE 0
SET LINESIZE 1000
set feedback off
set echo off
set termout off
Spool "C:\spool_test.txt"
select
rpad(EDC_PREVALENCE_TIME_CATEGORY,30) as EDC_PREVALENCE_TIME_CATEGORY,
rpad(CRG_METHOD_TYPE,55) as CRG_METHOD_TYPE,
rpad(EDC_AGG_CD,10) as EDC_AGG_CD,
rpad(EDC_AGG_DESC,100) as EDC_AGG_DESC,
rpad(PHN,9) as phn
from table1
where rownum <=1000;
Spool off;Another thing I am trying to do is add the column headings as the first row. I used to have "Set Heading On" at the top of my spool but that didn't seem to work either. I've figured out how to find a workaround to that but if anyone has suggestions I would appreciate it.
Thanks,
Ed

Hi,
spalato76 wrote:
Hi All,
I'm trying to spool records from my Oracle table into a fixed width text file. As you'll see below, I'm using the RPAD function to set the maximum width for my columns but for some reason the spool doesn't recognize the RPAD function and just uses some other arbitrary fixed width. Here's the code that I'm using:
Spool on
SET PAGESIZE 0
SET LINESIZE 1000
set feedback off
set echo off
set termout off
Spool "C:\spool_test.txt"
You seem to be using SQL*Plus, which puts a separator (by default, a single space) between columns.
If you don't want a separator, issue this command
SET COLSEP ""along with your other SET commands, before running the query.
That's 2 double-quotes in a row, with nothing in between them.
select
rpad(EDC_PREVALENCE_TIME_CATEGORY,30) as EDC_PREVALENCE_TIME_CATEGORY,
rpad(CRG_METHOD_TYPE,55) as CRG_METHOD_TYPE,
rpad(EDC_AGG_CD,10) as EDC_AGG_CD,
rpad(EDC_AGG_DESC,100) as EDC_AGG_DESC,
rpad(PHN,9) as phn
from table1
where rownum <=1000;
Spool off;That works for me; I get fixed-length columns exactly as expected.
Whenever you have a question, post CREATE TABLE and INSERT statements for a little sample data. Point out where your query is not getting the results you want, and explain how you get the right results in those places.
See the forum FAQ {message:id=9360002}
Another thing I am trying to do is add the column headings as the first row. I used to have "Set Heading On" at the top of my spool but that didn't seem to work either. I've figured out how to find a workaround to that but if anyone has suggestions I would appreciate it.
SET PAGESIZE 0means no headers will be displayed, regardless of the setting for SET HEADING.
Depending on your version of SQL*Plus, you can set PAGESIZE as high as 50000, so unless you have more than 50000 lines of output, you would only get 1 heading line.
I would use a PROMPT command right before the query:
Spool "C:\spool_test.txt"
PROMPT EDC_PREVALENCE_TIME_CATEGORY CRG_METHOD_TYPE ...
select
rpad(EDC_PREVALENCE_TIME_CATEGORY,30) as EDC_PREVALENCE_TIME_CATEGORY,
rpad(CRG_METHOD_TYPE,55) as CRG_METHOD_TYPE,
...Put exactly as many spaces as you need between the column names.
Alternatively, you could do a query from dual to produce the "headings":
Spool "C:\spool_test.txt"
SELECT RPAD ('EDC_PREVALENCE_TIME_CATEGORY', 30)
, RPAD (CRG_METHOD_TYPE, 55)
FROM dual;
select
rpad(EDC_PREVALENCE_TIME_CATEGORY,30) as EDC_PREVALENCE_TIME_CATEGORY,
rpad(CRG_METHOD_TYPE,55) as CRG_METHOD_TYPE,
...Notice I didn't use column aliases. Column headings are not being displayed, so it doesn't matter if the columns have nice concise aliases or not.

Hi i m uding i phn bt my bt my wifi conectivity is. ery short for another i phne s so what can i do plz help me

Similar Messages

Maybe you are looking for