Hi! I need urgent help.My IPHONE cant be conected in any way. I was using it and sudenly its dead. Im charging it and nothing. No reaction touching botons to connect desconect.any idea what to d?
hi I cant conect m iphone. it went black dead sudently. Im charging but no reaction at all. The bottons dont react. its dead? what to do???.
Plug it into a wall outlet for at least 20 minutes, then try doing a reset by pressing and holding the Home and Power button for 20 seconds.
Similar Messages
-
Plese I need help urgent my iPhone was stollen I dont heve any contact i need to know what to dooo?
<Personal Information Edited by Host>Hello Stormova,
I can understand your situation, do the following things first.
1. File a Police Report
image copyright City of Providence
File a report with the police in the city where the phone was stolen. This may or may not directly lead to the recovery of your phone, but having documentation of the theft may help in dealing with cell phone and insurance companies and, if you can get data about the location of your phone, having the police report on file may be necessary for getting the police to help you recover it.
2. Call Your Cell Phone Company
Making this the second step in the process. Some cell phone company representatives may be more inclined to take action when you've got a police report, others may act right away without one. Calling your cell phone company to report the theft and have the account tied to the phone suspended or canceled will help ensure that you're not stuck paying for charges incurred by the thief. Try tracking the phone first, though, since cancelled service could make tracking it hard.
3. If you have Setup iCloud on your iPhone
Login to https://www.icloud.com/ with the same Apple Id & password that you have configured on your lost iPhone and see if you can find all your Contacts there ( you will only find the contacts on iCloud if you have setup iCloud Account on your iPhone and had taken a backup on iCloud before)
On the same page you can also track the location of your iPhone if you have Find My iPhone Enabled on your iPhone earlier, and if your iPhone is connected to any Internet connection (Wifi/Cellular) you can see the last location and inform the same to the Cops.
http://support.apple.com/kb/ht5668 -
Need Urgent Help! iPhone 3Gs won't detect SIM after update to ios 6.1.3
So yesterday me and my sister's phone was working fine. I decided to update both of them, and when I updated, everything was reset to factory settings. Everything is running smoothly, but our phones won't detect the SIM. Either it says "No Service" or "Invalid SIM" when I turn on Airplane Mode. Urgent, please help!
I performed a backup / full reset / erase all / restore. When the phone rebooted, it appeared to be a clean, new iPhone (unnamed, no apps, no wallpaper, etc). I restored my backup and the notification is still there. I tried doing a hard reboot (home+off buttons), still there. I will attempt one more reset / erase / restore.
-
Need Urgent Help! iPhone 5c help.
I dropped my iPhone 5c in water. I read online that the best thing to do it to power it down and place it in rice. When I tried to power it down, all that appeared on the screen was a staticy-red. My iPhone is currently sitting in a bag of rice, but what I want to know is...is it too late?
I would say yes if the display was immediately showing problems. The phone is not just wet, it has been damaged and drying it out would not make any difference. Electronics and water are never a good combination. Even if it did work for awhile corrosion usually gets to it sooner than later. On the other hand you have nothing to lose by waiting.
-
I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister".
If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
Best of luck. -
Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased. -
Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.
Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof. -
I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????
Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else. -
Iphone 5 changes time randomly.. need urgent help!!
hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?
If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice. -
Need urgent help with HSDIO hardware timing
Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan. -
Need Urgent Help in PM8M-V H problem - keyboard freeze
Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks. -
BW error. Need urgent Help( I will give out full points).
We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time. -
Need urgent help!!!! (combine prompt and formula)
Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash -
I need urgent help to remove unwanted adware from my iMac. Help!
I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Need urgently help for OBIEE Installation (11g)
Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD
Maybe you are looking for
-
Boot Camp related hard drive corruption?
The other day, my OS X 10.5.1 partition completely crashed on me after several switched between it and the Boot Camp partition on my MBP (XP Pro SP2). I just happened to glance at my OS X partition using MacDrive and it told me that the partition was
-
I need help!! I drop my iphone4s in the toilet and its been in rice since Saturday and it wont turn on. I plugged it in and it got really hot. Is my phone not working at all no more.
-
Printing pdf exported from InDesign
When I print a pdf that I've exported from InDesign some of the graphic boxes or even text boxes that have effects, show up. They appear as a box with a subtle color a bit lighter than the background color of my design. These boxes do not show up on
-
I have tried all suggestions in articles relating to 'links in Thunderbird not opening in Firefox.' None of them work. The issue is, one link will usually open if it is the first time I click a link in Thunderbird. After that I cannot open any links
-
SIDs for Full table scan wait events in db
Guys, 10.2.0.5/ 2 node RAC / RHEL-3 CanAnyone provide me an sql to find all SID doing full table scans in a db? Thanks! Hari