Hi! I upgrade the software of  my ipad2 and now it is ios6, but now the you tube is lost? How can I have it again?

Hi

The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

Similar Messages

  • I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I fixed it!!
    While not connected to any USB cable I put the iPad in recovery mode.
    To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
    Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
    Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new.

  • JAVA ISN'T WORKING. I've tried software update and also reinstalling java. But it's still not working. How can I fix it? OS X 10.5.8

    I've tried software update and also reinstalling java. But it's still not working. How can I fix it? OS X 10.5.8

    Bad juju not having a bootable backup that you can revert back to when you run into these kinds of issues. Get a bootable, external HD, and make a bootable backup/clone before updating/upgrading and ensure that it's bootable and works like the original. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    Back to your issue. Boot with the Leopard install disk, select your language, select Disk Utility from the Utilities menu, and repair the disk and permissions. Report back.

  • When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    Does it not play at all or cannot you get the audio in the timeline?
    Did you copy the entire card to the hdd and then imported the file via the Media Browser?
    Did you source patch the audio tracks?

  • I downloaded the trial versions of photoshop and Illustrator....But now I can't use it because my mac freezes up, why?

    I downloaded the trial versions of photoshop and illustrator... But now I can't use it because my Mac freezes up whenever I try to use it?  Why is that

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • HT2509 I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

    I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

    Font Management in OS X

  • I purchased an album that won't play now that my match subscrription has ended. Not interested in re-subscribing, but I paid for that album. How can I download it again since the cloud icon doesn't display?

    I purchased an album that won't play now that my match subscrription has ended. Not interested in re-subscribing, but I paid for that album. How can I download it again since the cloud icon doesn't display?

    Hi,
    Does the track play? Did you purchase track from iTunes? Download past purchases - Apple Support
    Jim

  • Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, how can I have the old version? Thanks!

    Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, not going to the website by click "enter", "space" keyboard can not be the page down anymore, always die....
    how can I have the old version?
    Thanks!

    Just to clarify, let's say you have tab 1 Google results and tab 2 something else. When you Ctrl+click a link in tab 1, it opens between tab 1 and tab 2 instead of at the end? Here's how you switch that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
    (3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
    You can switch back to an earlier tab and test. Success?

  • My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

    ?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1212 Question??? My daughter has her old ipone 4 that she cannot remember the passcode to unlock it and retrieve her information to put on her new iphone 5..how can we find out her password to remove it and get her information

    My daughter has an old iphone4 that she can not remember the passcode to get into it and retrieve information for her iphone5...how can I restore the phone or get the password off w/o knowing current passcode?

    There is no way to retrieve any data from the phone unless you can remember the passcode. That's the whole point of the passcode, to protect the data. To remove the passcode, you'll have to force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/HT1808
    All data on the phone will be erased.

  • HT5654 when i connect my iphone or ipad to the computer, usually itunes opens and it starts backing up, but at the moment its just not registering on the itunes. iv switched my phone off and on, and repaired itunes, what do i do now?

    My iphone and ipad is not registering when i conect it to the computer. It doesnt show up on itunes at all so i cant sync or back them up. I have repaired the itunes, iv switched my phone off and on and its still not working. What should i do?

    Any one or a combo may help.
    Give  your devices a reset. Hold down the sleep and home keys for about 20  seconds. When you see the silver apple, let go and let it reboot. Then  try again.
    Try a different USB port
    Try a different cable
    Is your iTUnes up to date? If not, update it.
    If  that doesn't work, (if you're on a PC) go into the control panel,  add/remove programs and uninstall iTunes, Apple mobile device service,  apple application support. THen redownload and reinstall iTunes and give  it another try.

  • While upgrading to ios7 I think I restored to factory settings and my photos are lost how can I get them again? They weren't all backed up

    Hi, I was upgrading my phone to 7 and I think I reset settings to factory which I have lost all my photos and my notes. I hadn't backed up for a while so I can't get these off my computer. Please let me know if there is something I can do to get the photos back? I didn't delete them.

    You may not be able to get them back. I had that problem as well but I had backup. Unfortunately, my backup was corrupted so I was not able to transfer the backup data to my iPhone. Practically all the data on your phone is erased after resetting so if you don't have backup, you can't get the stuff back.

  • HT4539 I have an iPhone and an iPad, I've downloaded a book to my phone. How can I have the same book on my iPad without paying again?

    I have an iPhone 5 and an iPad, I've downloaded a book to my iPhone but I don't know how to download the same book on my iPad. Do I have to pay again?

    Open itunes, connect iphone, click File>Devices>Transfer Purchases
    Disconnect iphone.
    Connect ipad, select what you want, sync

  • Sometimes the screen is goes black and returns in a second, but disappear the cursor...

    I have a MacBookPro Retina conect with Thunderbold to iMac 27" like screen and when i work with video playing o apps with motion o similiar...
    The screen goes black (like a black flash) in 1 sec o less it returns.
    If I have music the music by the iMac speakers,... stop and returns with the screen but the mouse disappear and I move the mouse and make some click and suddenly appears.
    The MacPro is closed only use the iMac Screen.
    Thanks for all!

    I have a MacBookPro Retina conect with Thunderbold to iMac 27" like screen and when i work with video playing o apps with motion o similiar...
    The screen goes black (like a black flash) in 1 sec o less it returns.
    If I have music the music by the iMac speakers,... stop and returns with the screen but the mouse disappear and I move the mouse and make some click and suddenly appears.
    The MacPro is closed only use the iMac Screen.
    Thanks for all!

  • Firefox suddenly began opening every time I start my computer. The tab is always there and it never closes. I don't want it to. How can I change it back?

    I tried unpinning it but it is still always open.

    Hi 1865, if you no longer want email notifications from this thread, come back to your question and look for the QUESTION TOOLS section in the right column where you'll find STOP EMAIL UPDATES.
    Hi xSum1x, I suggest using some of the scanning tools in this article as the first step in the clean-up: [[Troubleshoot Firefox issues caused by malware]]. After that, you can use Microsoft's Autoruns utility to see what is running at startup and turn it off (using this tool can be a little overwhelming, but if you focus on the startup tab, it isn't too bad): [http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autoruns for Windows]. Does that clear it up?

Maybe you are looking for

  • Why apple is not letting me downgrade.. all my apps are crashing on mountain lion...

    i have the new macbook pro retina.. i am trying to use icth sparto dj software.. it crashes... so tried to downgrade mountain lion.. cannot downgrade not working.. now i have a loptop woth alomost 3000$ dollars and can't even use it to do my work....

  • How to compare 2 Dates..?

    I am retrieving a date from a text file, and I'd like to create a Date object with it, to compare it with the current date, and get the difference in days between them... I've tried during a long time to succeed, but the Date class is quite weird and

  • Is it Possible to Make a Flash Playable DVD for the iTouch

    Is it possible to make the same kind of "virtual" DVD player file in Encore for an iTouch audience that works like the Flash output in Encore? I am under the impression that the 3G iTouch can play flash files but if that is not correct then I guess m

  • Visual Age 3.0b and WLS451, how to setup ???

    I use Visual Age 3.0b on a NT 4(SP3) and imported all classes directly under /weblogic into an own project all classes in /weblogic/boot into an own project and all the the other classes in /weblogic into a third project Anyway, independent of the pr

  • Create an alert using the currentime

    Hi All, How do i create an alert in CR9 using the current system/PC time. Thanks.