Hi, I've a Power Mac (7200/120) and like to convert regional files into windows. English files are ok but am haveing problems with files that was written in Bengali version using Bengalics(font) I would appreciate ur help.s

Hi, I'm new to this forum want help from you...
I've a Power Mac (7200/120) & been using for almost 10 years. Now the light of the Monitor is fadeing within five min. I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window. I heard there are softwares that convert Mac to Window but don't know they can convert to regional language.
I would appreciate if one can help me on this.
thanks

chand@007 wrote:
I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window.
You need to tell us A) what app did you create those files with? and B) what format are they in (.doc, .txt, etc)?
It may be possible to just transfer the files and your font to another machine without conversion depending on how they were made.
Where did you get the BengaliCS font?

Similar Messages

My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

Power Mac 7200/120 won't boot off new hard drive. Says HD "not supported"

I just recently came into possession of a PowerMac 7200/120. The only thing it came with is a boot cd with Mac OS 8.1. It booted fine off the cd with only the date/time issues of a dead PRAM battery, but when I tried to boot the internal HD on its own, it was a no-go. Flashing ?. When I tried to verify the HD, the software would not even find the HD. Not even listed on the program. You can't initialize what isn't there, so I ordered a new HD from an online vendor. I replaced it according to the directions on the Apple .pdf file I googled. I also reset the logic board and replaced the PRAM battery. Upon booting after all this ... still flashing ?. I run the same verification process as before and I actually DO see this HD listed, but it says it is "not supported" and doesn't allow me to initialize it. It's virtually the same quantum fireball HD with the Apple logo as the old one I just took out, just a different GB size. Connections and slots are all the same. Is this just not the right HD for my computer? Is there something I need to download? I just rebuilt a Performa 6300cd with ZERO issues.

Ok ... a couple of mistakes on my part which of course could change EVERYTHING. I'm embarassed with the amount of mistakes in my own question. A couple of forgetful omissions on my part ...
#1. The drive DID start up just fine upon first switching out the HD. Original software on HD was 8.1, but as I needed to run older programs not compatible with 8.1, I initialized and installed 7.5.3 clean. (I know ... HUGE omission here, but be kind as I've been working on multiple computers and it has been a couple months since I did this). It worked fine after download. After coming back to this computer a couple of months later, I get the flashing ? again (like before the HD switch).
#2.The HD the online vendor sent me was not the one I ordered, but ended up being a carbon copy of the one I took out except the GB size (which was actually larger than the one I ordered). Didn't physically count the pins, but it plugged in fine. Everything fit.
#3. I also forgot to mention that while the CD drive worked, the floppy either spat my disks out at me or asked to initialize them. These were the same floppies that I took out of my Performa literally a minute earlier (which worked).
#4. The 8.1 cd is a mistake on my part again. Turns out it's the black-faced 7.5.3 cd (7200, 7500, 7600, 8500, and 9500 series). Got confused with the 8.1 drive.
UPDATE
The strangest thing ... I just booted up off the cd and it's now reading the HD. I ejected the cd and booted it up on its own ... and it works just fine. I did NOTHING since I asked the question. In fact, I just booted the computer back up in response to your response.
Before I delved into these boards and bothered to ask for help ... I had opened it up, cleared out a TON of dust bunnies with my can o' air, pressed the CUDA? chip, and then replaced the PRAM battery. Restarted holding down cmd-opt-p-r until it chimed again and it was still a flashing ?. You could hear it clicking as if trying to start the drive up at regular intervals. I restarted the computer well over 10 times hoping it was just something jammed up in the HD (though just bought) and it was the same flashing ?. And now today ... did nothing and it boots up just fine. I check the drive setup lite and it now shows macintoshHD there (instead of unsupported drive - original showed nothing at all).
Does it take time for the PRAM battery or logic board to reset? Did it just needed a thorough internal cleaning? Or should I chalk this up as just being a really old comp?
I really don't want to go delving back into it now that it's working to check the SCSI terminations, jumpers, etc. I'm going to assume those are ok now it's booting.

I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Having problems with phone getting too hot when not in use

Hi there -- I'm trying to figure out what I can do to fix this. Recently I had to get a replacement S3 because my original shut off mid-use and wouldn't turn back on. The replacement has been here for about a month and in the last 2 weeks I'm having issues with it getting too hot. The first time it happened, I had it plugged into the stock charger for about 1 1/2 hours - and I had picked it up expecting it to be fully charged but it was extremely hot and had a warning on the main screen saying that the battery was critically hot and was not charging and the phone was nearly completely dead. I unplugged it, took the battery out and let the main phone body cool down. After about 15 minutes, the body felt like room temperature again, so I put it all back together. It turned on, charged normally that night and all was well.
Now for the last several days, I'm having issues again with it getting hot at random times when I'm not even using it (and not charging it). The last time, I downloaded a temperature app and it said the phone was nearly 105 degrees, and it felt the hottest right at the home button. Later that night after it cooled down, I noticed that the battery wasn't charging at all and was depleting rapidly on the charger. I restarted twice with no change and then took the battery out and let it sit for several minutes. After that it began charging again.
With it getting hot so much more often now, I'm starting to worry about this happening when I need my phone for an emergency as I spend a lot of time on the road transporting my kids to school and activities. Is there a fix for this? It doesn't appear to be the battery because my husband and I have the same phone and I've already swapped batteries with him - same issue for me, no issue for him. Please help? Thanks!

Hello Micheliu813, let's get to the bottom of this together! Are you using the same charger that came with the phone or a 3rd party charger? We can also test the phone in safe mode to see if the device heats up again. Check here for steps: http://vz.to/1kb9LUM
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Having problems with my new mbp hooking up to internet using a DSL motorola business modem in some rooms of my house does anyone what couldDSL MOTORDSL motorola business, having problems with my new mbp hooking up to internet using a DSL motorola business

DSL

I previously had this problem on two 15" MBPs and fixed it on both by downing the following:
1.) Install 10.4.6 update
2.) Delete system keychain entry and any login keychain entries for the wireless network
3.) Go back to System Preferences -> Network and re-enter the login and password for the network.
Since then they have both reconnected to the network automatically with no problem. Before that I had the same symptoms you describe.
Thanks for replying. The issue that I have to go
through with my 15" is that whenever it sleeps or I
reboot I have to turn off Airport, turn it back on,
find my wireless network and reconnect. The guy I
talked to at the Apple store told me that was normal,
but I have never had to do that with other laptops I
have owned nor do I need to do that when I boot into
XP using boot camp. <shrug> Just wondered if that was
common to all MBP's, just the 15 or just mine hehe.

While using HP 34401A Multimeter, I'm trying to create a database but am having problems with it.

Hi, I'm trying to save the readings in a ASCII file by using in 'HP 34401A Getting Started.vi', a file provided in the instr.lib folder.
The multimeter reads the instruments correctly and displays it on the screen, but when I connect the wire to 'Write to Sreadsheet File.vi', it shows 0 in the ASCII file (which I open in Excel) yet showing the correct readings on the screen.
Any help is truley appreciated.
Kunal.

Kunal,
When using the "Write to Spreadsheet File.vi", make sure that you have the format parameter correct. You can find a list of the parameters by going to Help\Contents and Index\Index in LabVIEW and searching for "formatting". "Specifier Syntax in Strings" and "Format Specifier Examples" may be useful to you. Make sure that you have enough decimal places.
The LabVIEW User's Manual may also be of use to you. You'll find the link below.
http://digital.ni.com/manuals.nsf/caba5d53e9b015a186256793004eebb7/29b411c6839de35b8625690d007612ad?OpenDocument
Kim L.
Applications Engineer
National Instruments

Help Needed! I have created a 13 Min Slide Show in iPhoto (iMac Mavericks) but am having problem with adding music.

I created a 13 min Slide Show in iPhoto but have a question on adding music. I would like to add music clips that are set to change at the beginning of certian slides so that there is a varity of music during the show rather than a continuous theme clip. I know you can add multiple clips but can you pin them to change at a particular point in the program? Right now the music clips just run to their time limit and the next one starts. Isn't there a way to edit them the way it can be done in iMovie? Its frustrating to be able to create a nice slide show and not be able to manage the music background. Any suggestions would be greatly appreciated. Thanks.

No, you don't have that fine grained control of the soundtrack in iPhoto. It's designed for a quick job, not a complex one.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Help ! Having problem with program that converts .pdf to .doc file

I just purchased the program that converts a pdf file to a docx or doc file and it worked fine. the form looks great BUT when i tried to use it tonight, the first line typed just find. After that letters are typing over other letters and the space bar does not work... what could i be doing wrong or does this producct not work?

I don't think this is a Adobe program, or is it? What's the name of the program?

Having problems with itunes on my itouch. keeps repeating songs when its in shuffle . Any help please.

All of a sudden I am not able to play in shuffle mode, it just keeps replaying the same song over and over again.

hi leon..
its my thought
u didnt mention ur jdk versions..
some times.. ur older versions of software is not flexible to adopt in new versions of jdk`s..
same vice versa...
u check it out.....

Problem with file permissions using Snow Lepord

I'm having problems with file Sharing & Permissions using Snow Lepord.
When I save any new file it only has 'Read & Write' privileges for the user, everyone else is 'read only' or 'no access'.
We have a Netgear NAS Server which is accessed by other users over the local network and if I change the Privilege to 'read & write' via Get Info and then copy the file from my desktop to ther server it changes the Privilege of the server version to 'no access' we then have to change it again for it to work.
I also created a new folder on the server and now it says 'no access' and has a no entry icon!
Any ideas???

We have issues like this. Have tried running AFP and SMB, now connecting using CIFS. All have the same problem. I can work on one or two files fine, then suddenly, one of the files I just worked on says I don't have permissions. I log off the server and log back on, and then I have permissions to the file. It will work fine for one or two operations, then fails. We just updated to OSX Mavericks and a Windows 2012 server, but have been having this issue for years. My permissions look fine. I can even change permissions, but it won't let me work on the file or move or delete the file or rename the file. Once I log out and log back in, I can do anything I want.

I have a Power MAC 7200. It's hardware is failing. How can I get the old files off, so I can use them on a PC? This system will save to a 3.5 inch floppy disk.

My Power Mac 7200 is failing. I would like to be able to use old reports on my PC. How can I transfer them?
The Mac will save files to a 3.5 inch floppy disk.

You could write the files to a PC formatted floppy, you might be able to do File Sharing from it to the PC with an Ethernet cable.
How bad off is the 7200? Can we maybe fix it?

I am having problems using Numbers package, unable to add specific cells in a column, when I tap "sum" it totals the whole column, rather than the specific cells I want. Would appreciate any help. Thank You Francis

I am having a problem with adding selected numbers in a column. When I select "sum" the whole column is added, not just the selected cells. I would appreciate any help how to rectify? Many thanks. Francis Anthony

I don't know if this is the best way but it's pretty easy.
1.) Select the cell you want the sum in.
2.) Select the sum function
3.) In the line where you see =sum(B2:B8) using your finger tap the B2:B8
4.) Use the backspace key to delete the B2:B8 and it will then show "value"
5.) You can now tap any cell you want in the sum
6.) When finished tap the green check mark button at the end of the sum line.
That pretty much sums it up.
Good luck.
Steve

Hi, I've a Power Mac (7200/120) and like to convert regional files into windows. English files are ok but am haveing problems with files that was written in Bengali version using Bengalics(font) I would appreciate ur help.s

Similar Messages

Maybe you are looking for