Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

Similar Messages

  • I have just get an apple tv but I could no configure my wifi, it does no appear any wifi name list, i connected it with an ethernet cable, but no with the wifi net, what sould i do

    I have just bought an apple tv, I have tried several times to confiure the wifi but no success, the wifi nets list does not appear, I have connected with an ethernet cable but not with the wifi net...what can I do? is it normal? am I missing something?

    Same thing here...Just bought it today, and only with the ethernet cable it worked...tryed to update it and now both wifi and ethernet won´t work...Any ideas?

  • I have an itunes library on an external drive I want to use on a dool boot computer. How do I set this up without duplication of files

    Ok, here goes with the explanation. I am running a Mac Mini mid 2010 with mt iTunes library on an external USB drive. I dual boot the computer into Windows 7. I want to be able to use the same iTunes library in both Operating Systems. I am trying to set this up on the Windows side without accidentily erasing, moving or duplicating any files. In the past when I have tried I have ended up with multiple files. I have an iCloud also but do not want to download any files again. How can I get iTunes on Windows to simply recognise my existing storage and create a library list from what is already there rather than duplicating files?
    Update: As soon as I signed in with my iTunes account iCloud picked up my playlist and now lists all my music. Right clicking on the songs give me the choice to download the files, but the files already exist oin my external USB. I simply want iTunes on Windows 7 to point to the existing files.

    How is the external drive formatted?
    Allan

  • I only want to download e-mail via wifi, how do I set this up?

    I have just got iPhone4 and only want to download and send e-mails via wifi connection i.e. NOT the 3G network, is it possible to set up this as option and if so how?

    Please go to
    1.Setting
    2. mail,contacts and calenders
    3. add accounts
    4. insert your email account and password
    5. Autometically imports your mails if you open mail folder on the desktop..
    That is it.

  • I have an apple tv but lost the controller I connected my apple tv to my internet with an ethernet cable and it worked fine for the past week it has now stopped working

    id also like to mention that before it stopped giving me the option to use airplay on my iphone, i had disconnected my apple tv because it was in the sun while i was watching it, and a message popped up  saying "temperature: your apple tv is over heating. this message will dissapear when your apple tv is ready,"

    Take it in to Apple

  • I just want to change my billing information!!!!!! How do i do this?? So frustrating

    I just want to change my billing information!!!!!! How do i do this?? So frustrating

    Start with the AppleID page and go to Manage Account.

  • Just want to use Time Capsule as a wireless hard drive?

    I thought I was computer savvy until now.
    I just want to use Time Capsule as a wireless hard drive. I do not want to connect my Internet to it whatsoever. I realize this would involve disconnecting from Time Capsule and reconnecting to my Internet every time.
    The settings for Time Capsule are just mind-boggling.
    Is there any easy way to set it up as a password-protected wireless hard drive?
    I am so lost with all the settings.
    Please help! I will provide points!

    First, you don't need to use Time Capsule with Time Machine. It can be used as a manual file storage or file exchange drive.
    Where do you have the Ethernet cable placed on the Time Capsule. Is it the WAN port or one of the network ports?
    If you are attempting to set-up the Time Capsule as your wireless router, it will need to be connected to the wired modem from your service provider through the WAN port for configuration. The Time capsule should then appear as a configurable Airport device.
    To start, turn off your cable or DSL modem and the Time Capsule. Turn them both back on with the Time capsule connected to the wired modem via of the WAN port so the modem can grab the TC's MAC address.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
    In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
    Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
    use icloud (who does not want to be able to track their phone if lost or stolen).

  • I have an iPhone 3G.  I removed the simm card and placed it in another phone.  Now I want to use it to just play music.  I keep seeing a message on the screen that says the simm card is missing.  Are there settings I can use to prevent this message?

    I have an iPhone 3G.  I removed the simm card and placed it in another phone.  Now I want to use it to just play music.  I keep seeing a message on the screen that says the simm card is missing.  Are there settings I can use to prevent this message?

    no are gonna need a SIM card in the iphone for it to work even to play music on it

  • I set up time capsule using a wireless 4g modem.  it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB).  Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

    I set up a new time capsule on a wireless 4g modem.  I started the initial backup.  It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)."  Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
    Thanks,
    David

    Bunce wrote:
    oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
    If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
    I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
    suggestions before I either get this looked at or scrap the HD on it and move forward.?
    Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
    Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
    If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

  • HT1420 I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    I just bought my cousin's ipod, and I want to update it on my computer.  However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers.  How can I update this ipod without losing all the apps?

    You cannot use someone else's apps without violating the license agreement. The apps are tied to the owner (via Apple ID). The right thing to do would be to update and start fresh.

  • I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

    I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

    Alfi94965 wrote:
    I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard
    First off you need to know the model identifier of the machine, not all Mac's can be reverted to Snow Leopard and not all Mac's can use the 10.6.3 Retail disk!
    To find the model identifier, boot the machine up and hold the command key and the spacebar, Spotlight appears at the top right corner and type in System Profiler and press Enter/Return.
    The model identifier should be something like "MacBook Pro 9,2" or something of that nature.
    You also can hold D while the computer is booting on/near a Internet connection for a long time and this loads Hardware Test, which one of the panes will give the required information.
    Next you download MacTracker here and look up your machine and it's original operating system.
    (Don't click the AppStore version obviously)
    http://mactracker.ca/
    You may have to right or control click on the program to bypass Apple's Gatekeeper and run the program.
    If you have the model identifier and the machine won't boot, then just ask here and we can tell you the information
    Now all Intel Mac's issued before July 2011 can install Snow Leopard, but the Mac's released after July 2011 came with OS X 10.7 Lion and the firmware won't boot off the Snow Leopard disk. (however 10.6 can be shoehorned on using Firewire Target Disk Mode and another Mac for some models after July 2011)
    Also the 10.6.3 Snow Leopard Retail Disk sold at Apple only works on Mac's that came with 10.4-10.6.2 from the factory.
    Any Mac's that originally came with 10.6.3-10.6.8 from the factory need model specific disks from Apple directly, not sold at their online store, you will have to call them with your Mac's serial number and order these disks.
    If you get the right disk and have the right machine, then you should be able to insert the disk and hold c down or the option/alt key and boot from the 10.6 disk.
    Follow these directions and make sure to erase the ENTIRE DRIVE first in Disk Utility or you will have issues later trying to fix it from the disk.
    How to erase and install Snow Leopard 10.6

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account].  Now I live in South Africa and want to use Match.  I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

    I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account].  Now I live in South Africa and want to use Match.  I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

    You have to be in a country to use its store - you will need to be in the US and have a US billing address on your account to be able to use the US store (that applies to buying and redownloading).
    You can use iTunes Match in South Africa, do you not have a backup copy of all of your US iTunes purchases so that you can subscribe to it and upload those that aren't in the South African store to it ?

Maybe you are looking for

  • How to Capture excise in procurement plants

    Hello, Company 1000 is having two plants, 1100 and 1200 1100 plant is in Delhi. 1200 plant is in Mumbai 1100 plant is manufaturing plant, 1200 plant is only procurement plant, here we are not manufaturing any parts. Then we are creating the Purchase

  • Access mirror site using java, download files and other information?

    Hi, I have 2 nodes/servers on the system both running webservers and having the same interface, but at a time user will access one node at a time from their browser, but this interface will be able to allow the user to get information from the both t

  • Too much space after form

    There is too much space after the form: http://zooop.net/birch_center/ I can control the space by adding a height tag in this tag: <iframe src=" http://www.birchcenter.com/OpenNewsletter/includethis.php" frameborder="0" width="170" scrolling=no style

  • Replication queries

    Hi Friends, I have some queries, please help me to resolve the issues. 1) i have replicated the plant from R/3 to CRM, plant is already been replicated, but the issue is under which role the plant will be treated as, it has taken the standard interna

  • Error in calling Java Beans

    Hi. I was trying to use a bean that i will run on my jsp. Basically, i have this Matiss_Import.jsp that calls the Matiss_DB_Trans.java by using the <jsp:useBean id="db_trans" class="Matiss_DB_Trans"/> My Matiss_DB_Trans.java and Matiss_Import.jsp are