Hi. im currently using firmware 1.0.3 as ive been wary of upgrading because
hi. im currently using firmware 1.0.3 as ive been wary of upgrading because of the problems the last update caused.
Is the newest update safe to install or should i carry on with 1.0.3
Also i am currently using itunes version 7.5 and would like to know if its ok to update to the newer version
Many thanks
TOSHIBA EQUIUM M70 Windows XP 2G RAM INTEL PENTIUM 1.70GHZ
A few weeks ago I too upgraded from 1.0.3 to 1.1.1 and thus far it's working out OK. I wouldn't say phenomenal since I would have loved a customizable EQ. But, menus are definitely faster now, the sorting problem with sequenced TV series episodes is fixed and it does seem a tad louder.
So far no battery drains to report. I know with 1.0.3 I had the battery drain on me 2-3 times after a full charge. I think though it was because of a bad iPod. I had that one replaced with the current one I own and this one has yet to have and problems with battery drains. Again, I discount this to a bad iPod.
One thing though, update first to the latest version of iTunes prior to updating. It's better being on a level playing field with Apple's Support when updating the iPod classic.
Anyway, good luck!
Similar Messages
-
I am using OS 10.4.11 on my Macbook. I want to upgrade to at least 10.5 to sync my new ipad, but can't seem to find a download. I see that it is not possible to upgrade to a higher 10.5 version unless you have the basic one. Any suggestions??
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
i am new to icloud. i would like to manage all our household email accounts through icloud. i currently use gmail. is there a way to route all gmail messages through an icloud email so i do not have to change my email address? also how do i create multiple email accounts using the same apple id?
thanks all.
MikeNo, iCloud does not handle 3rd party mail, and Google can already sync to all your devices without any help.
iCloud accounts are individual, there is no 'Family' account. Open an account for each user, each will have an iCloud address. -
Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.
Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran -
Filename to IPTC Title, but without extension. (Currently using DAM script)
Hello,
Apologies if this isn't the correct forum to ask this question:
I am currently using the DAM Filename to Title script with Bridge CS4 - http://www.damuseful.com/pages/PimpMyBridge.html - to get the filename into the IPTC title script. This however puts in the extension into the title field also. So a JPG file named 2000 ends up with 2000.JPG in its Title field. I wish to not have the extension appear in the Title field.
Is this possible by modifying the DAM script / using any other freely available script.
In case it helps, this is what the DAM script currently looks like:
#target bridge
if ( BridgeTalk.appName = "bridge" )
//This script copies selected thumbnails' filenames to the title field
//Also shows how to add menu items
//The AdobeLibrary scripts must be loaded
//This script was created by John Beardsworth www.beardsworth.co.uk/ and modified by Peter Krogh www.DAMuseful.com
//This script may be freely distributed and modified
// Let's create our menu
var menu = MenuElement.create( "command", "Write Filename to IPTC Title Field", "at the end of Tools");
menu.onSelect = function(m)
var getFolderChildren = true ;
var filesOnly = true ;
var thumbs = getBridgeThumbnails ( TYPES.PHOTOSHOP_OPENABLE, getFolderChildren, filesOnly) ;
for ( var i = 0; i < thumbs.length; i++ )
{ thumb = thumbs[i];
md = thumb.synchronousMetadata;
md.namespace ="http://ns.adobe.com/photoshop/1.0/";
md.Title = thumb.name;
Window.alert ("Done " + i + " records");
There are also 3 other Adobe Library scripts that come with the download.
I know absolutely nothing about scripting, so baby-steps would be appreciated.
Many thanks.Change:
md.Title = thumb.name;
To:
md.Title = decodeURI(thumb.name).replace(/\.[^\.]+$/, ''); -
The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!
Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085
-
My husband and I both have iPhones. We are currently using the same Apple ID. I have my own ID but when I send him a text message it comes back to me or goes to my computer. How do we separate the 2 ID's so we can send messages?
You need to reconfigure your phone for use with your Apple ID. I suggest you restore yours as new then reconfigure it with your information and Apple ID. Be sure to disable Find My Phone, if it's enabled, before proceeding.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
I have 2 Itunes accounts, one I don't use with money in the account, can I combine that money or account into the account I currently use?
You can access, usually under the Apple (icon) menu in the main desktop
window, note item with name "About this Mac" & click on that, to see more
information about your computer, its OS X version, and other. The system
version and build model are there. Do not post a serial number.
If you are setting up Mail in a Mavericks OS X 10.9.x system, there often
is access to information in the Help viewer from the main menu bar, or
in an open mail application. If you have a Gmail or other account, that
info is often on their home page where setup and help are located.
The settings of each email account may vary according to their provider;
so you would have to change your computer to accept them. An older
link to a general look at that issue, change IMAP to POP, is covered here:
https://discussions.apple.com/message/16770816#16770816
While that may not answer your question, you could use the info in
your Mac OS X system Help viewer and use its search; or maybe
a Spotlight search to see an answer online.
You have to learn some basic things in order to actually use these...
and it helps to expand that so you won't have to pay for tech service
on things you can do yourself in a few minutes, beyond easy stuff.
Of course, you're hearing this from a guy with no ISP email, ever.
So mine are web-mail only; & I never save email to a computer.
PS: If you have a new Mac with an AppleCare plan, you may be able
contact Support for help. Ask someone (for 90 days, or up to 3 years
if the Plan was extended) there at AppleCare, for their guidance.
http://www.apple.com/support/contact/
Good luck & happy computing!
edited -
Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?
I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
our family is currently using all the same Apple ID so we don't have to purchase thing twice, but now I want to set up the family share. Do we all have to have our own Apple ID to set up the family share? We do all have separate iCloud's accounts, I'm not sure if that even makes a difference.
Hello me1002,
That is a good question. Everyone will need their own Apple ID that is signed into iCloud and iTunes. When setting this up, someone will need to be the Organizer so whom ever it is will champion this. Then everyone else will need to sign in to each respective accounts and then the organizer will need to send out invites to join Family Sharing. If you get that all setup, remember that when making purchases from those Apple ID will belong to that specific Apple ID so if anyone leaves, others will not have access to that purchased content.
Start or join a family group using Family Sharing
http://support.apple.com/en-us/HT201088
Regards,
-Norm G. -
So i just bought a new iphone and was trying to back it up onto my computer. I accidentally backed it up onto my moms icloud account that she is currently using. If i erase all content and settings will it delete everything in general or just off MY iphone that im currently using? I just need to reverse it but i don't want to delete all of her data, etc.
Hi brifuhrman,
Go to Settings>iCloud and scroll down to the bottom of the screen. Click on Delete Account and type in your Mom's iCloud password when it asks. Follow the prompts to finish deleting the iCloud account from your phone.
Once you have deleted that iCloud account from your phone, see if the things that you no longer want on your device are gone. If they are, then sign on to iCloud with your own iCloud ID and you will be ready to go.
If there are still things you need deleted from your device then start from scratch by doing a Reset All Content and Settings.
Cheers,
GB -
i have an ipod, ipad, and iphone. ilike to use imessage on all of them but i dont want messages to appear on the devices i am not currently using. nor do i want to have to keep a saparate account / id for each device how do i fix the settings on each so that with the same ID / login I can chech me emails, share contacts etc, be able to use i messenger on each without the whole conversation automatically beiing picked up by my other devices? some conversations just arent intended to be shared!
Turn it into the local police department with an explanation as to who you tried to contact and what they told you. That's the only safe procedure, as otherwise the owner could report the iPod as stolen, even though you tried to return it, and get you into trouble.
Regards.
Maybe you are looking for
-
When you send a PS file which has a linked Smart Object to a print vendor, will you need to send the linked Smart Object file as well?
-
How to store multiple values in a coloum for a particaular row?
By mistake i posted this in abap general forum but i think this question should belong to Data Dictionary section I want to design a table where we can store a table where we can save multiple values of column for a particular row. how to achieve th
-
HP C3180 All In One Prints test page everytime I turn it on
My printer prints a test page everytime I turn it on. This is a huge waste of ink. What should I do?
-
I would like to uninstall adobe reader because I get a lot of error messages - The root object is missing or invalid. and I can't figure out how to fix that - it is not helpful at all. Now I am trying to uninstall and I can't seem to get the name an
-
MVC 4 Using Entity Framework How to save Images in Database
Iam Beginner to MVC 4 ... I want to Upload Image from my form and save to the SQL Database by Using Entity Framework . I have searched alot but couldnt succeed yet,,