Hi ,send me the test programms over the benefits

hi,
every body this is pandu , requiring the reports over the benefits.
regards,
pandu.

Hi,
Pls check SAP BW Interview Question !
on BW interview questions.
Eddy
PS. Reward the useful answers and you will get <a href="/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Similar Messages

Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many Thanks

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

Case number 0123115765 ser no serial numbers removed send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without

case number 0123115765 ser no <serial numbers removed> send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without any fuss!!! Regards answer via email what to do! Regards Bo

Call Apple to get the replacement DVD > http://support.apple.com/kb/HE57 When you have the DVD, insert it and install iPhoto. Finally, open  > Software Update and install the most recent version

I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction due to the size limit. Does anyone know what exactly the limit is? Thanks!!

I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction of the video due to the size limit. Does anyone know what exactly the limit is? Thanks!!

You said: "I've never tried the restore function in disk utility. Would that be the same as cloning the drive?
YES! See the my old instructions below. What you might try after step 5 is to restart you MBP holding down the Option key. Select the new HDD icon and see if it boots. This way you will know that the new HDD is operable.
Ciao.
INSTALLING A NEW HDD IN A MB
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Mail in OS Mavericks HELP!!! Why do some of my emails not send despite the sent sound playing?

Dear Mac Community
I have a MacBook Pro running OS 10.9.1 and everything is fully updated.
I use the Mac Mail programme to send and receive Gmail emails as I have done for many years.
Recently, I started to notice a worrying problem. Every 10 or 20 emails or so, (I haven't noticed a specific regularity), I write an email and press send. The mail seems to send fine and I get the sound notifying me it has left the outbox. However, when searching for a reply, I find that in fact it is not in sent items, and it has only been located in Archive - Gmail (all mail) or Trash - Gmail, and not in any sent folder. Indeed, when I ask the recipient if it has been received they say no.
Since the mail programme is telling me at the time of sending there isn't a problem, how can I ensure that all emails are sending correctly without checking 'sent items' every time I send one, which would be deeply frustrating. I've only noticed this a few times because key emails haven't been replied to - but it's possible that there have been several other incidences I haven't been aware of.
I don't know if this is related, but another similar problem occasionally arises, whereby an email pops in on my phone (iPhone 5s also using mac mail programme for gmail) but not on the computer. In fact I can't see it unless I click on the 'Gmail Archive' folder where it appears, and copy it manually into my inbox. The regularity of this seems to be equal to that of the former problem, which is why I wondered if it could be related.
All help gratefully appreciated
Thanks
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.1)

In that case your email provider's server is having difficulties to deliver the message to the recipients email provider server.
This has got nothing to do with Thunderbird.
There is little you can do though. You may have the recipient to check with his email provider if they have any issues.

Wrong Sender Agreement:The Sender agreement does not have channel

Hi Guys,
I am trying RFC to File scenarion where I am triggering a report which is calling a RFC module I have given the destinaztion name correct .When I am executing the report it is failing giving the following error
"Wrong Sender Agreement:The Sender agreement does not have channel"
I have checked that sender agreement is there.
Also when Iam changing the RFC call by removing IMPORTING parameters and adding IN BACKGROUND TASK It is getting executed and goin to XI successfullly but after adding IMPORTING Param it is failing ?
Any suggestion on the same?
Regards

Hi Guys ,
I have tested the same again from RFC directly without Report and after some time it failed giving 'SYSTEM ERROR'.
When i checked the channel it is giving following error:
Error: 2008-01-10 13:36:19 IST: Message processed for interface Z_RFC_TESTSYNCASYNC: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
Any help now ?
Regards

I use an Apple bluetooth keyboard with my iPad. In messages I can't find a way to "send" a message without tapping on Send on the iPad's screen. I've tried every key and key combo that I can think of. Am I missing something?

I use an Apple bluetooth keyboard with my iPad. In messages I can't find a way to "send" a message without tapping on Send on the iPad's screen. I've tried every key and key combo that I can think of. Am I missing something?

I already have multiple devices and by far I like my iPad the most over laptops and the iPad. That including checking out my friends MacBook Air.
The difference for me is the touch interface on the screen itself for things that do not require a lot of typing. For me, the iPad is more "magical" than anything else I've used.
Again, I do appreciate your answers but you don't know my situation. Not everything is as it is perceived without knowing me and what I have to go through.

HI PLS SEND ME THE ANSWERS

HI friends plz send me the answers
What are the steps to be followed while doing enhancement?
How do you find particular key figure is coming from particular data target?
How to load data duplicate without over writing?
You are running process chains without manually how can you compress cube?
What is reconciliation can you describe it?
What is recording process?
What is the dynamic selection criterion in sapbw? Where they will use it? What is purpose of that?
with regards
sridhar

Hi,
Pls check SAP BW Interview Question !
on BW interview questions.
Eddy
PS. Reward the useful answers and you will get <a href="/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
 <Application>
 <Name>ReportServerWebService</Name>
 <VirtualDirectory>ReportServer</VirtualDirectory>
 <URLs>
 <URL>
 <UrlString>http://+:80</UrlString>
 <AccountSid>S-1-5-19</AccountSid>
 <AccountName>NT Authority\LocalService</AccountName>
 </URL>
 </URLs>
 </Application>
 <Application>
 <Name>ReportManager</Name>
 <VirtualDirectory>Reports</VirtualDirectory>
 <URLs>
 <URL>
 <UrlString>http://+:80</UrlString>
 <AccountSid>S-1-5-19</AccountSid>
 <AccountName>NT Authority\LocalService</AccountName>
 </URL>
 </URLs>
 </Application>
</URLReservations>
<Authentication>
 <AuthenticationTypes>
 <RSWindowsNegotiate/>
 <RSWindowsNTLM/>
 </AuthenticationTypes>
 <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
 <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
 <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
 <IsSchedulingService>True</IsSchedulingService>
 <IsNotificationService>True</IsNotificationService>
 <IsEventService>True</IsEventService>
 <PollingInterval>10</PollingInterval>
 <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
 <MemorySafetyMargin>80</MemorySafetyMargin>
 <MemoryThreshold>90</MemoryThreshold>
 <RecycleTime>720</RecycleTime>
 <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
 <MaxQueueThreads>0</MaxQueueThreads>
 <UrlRoot>http://abraham/Reports</UrlRoot>
 <UnattendedExecutionAccount>
 <UserName></UserName>
 <Password></Password>
 <Domain></Domain>
 </UnattendedExecutionAccount>
 <PolicyLevel>rssrvpolicy.config</PolicyLevel>
 <IsWebServiceEnabled>True</IsWebServiceEnabled>
 <IsReportManagerEnabled>True</IsReportManagerEnabled>
 <FileShareStorageLocation>
 <Path>
 </Path>
 </FileShareStorageLocation>
</Service>
<UI>
 <ReportServerUrl>
 </ReportServerUrl>
 <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
 <Delivery>
 <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
 <MaxRetries>3</MaxRetries>
 <SecondsBeforeRetry>900</SecondsBeforeRetry>
 <Configuration>
 <FileShareConfiguration>
 <ExcludedRenderFormats>
 <RenderingExtension>HTMLOWC</RenderingExtension>
 <RenderingExtension>NULL</RenderingExtension>
 <RenderingExtension>RGDI</RenderingExtension>
 </ExcludedRenderFormats>
 </FileShareConfiguration>
 </Configuration>
 </Extension>
 <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
 <MaxRetries>3</MaxRetries>
 <SecondsBeforeRetry>900</SecondsBeforeRetry>
 <Configuration>
 <RSEmailDPConfiguration>
 <SMTPServer>192.168.11.210</SMTPServer>
 <SMTPServerPort></SMTPServerPort>
 <SMTPAccountName>
 </SMTPAccountName>
 <SMTPConnectionTimeout>
 </SMTPConnectionTimeout>
 <SMTPServerPickupDirectory>
 </SMTPServerPickupDirectory>
 <SMTPUseSSL>
 </SMTPUseSSL>
 <SendUsing>2</SendUsing>
 <SMTPAuthenticate>
 </SMTPAuthenticate>
 <From>[email protected]</From>
 <EmbeddedRenderFormats>
 <RenderingExtension>MHTML</RenderingExtension>
 </EmbeddedRenderFormats>
 <PrivilegedUserRenderFormats>
 </PrivilegedUserRenderFormats>
 <ExcludedRenderFormats>
 <RenderingExtension>HTMLOWC</RenderingExtension>
 <RenderingExtension>NULL</RenderingExtension>
 <RenderingExtension>RGDI</RenderingExtension>
 </ExcludedRenderFormats>
 <SendEmailToUserAlias>True</SendEmailToUserAlias>
 <DefaultHostName>
 </DefaultHostName>
 <PermittedHosts>
 </PermittedHosts>
 </RSEmailDPConfiguration>
 </Configuration>
 </Extension>
 <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
 <MaxRetries>3</MaxRetries>
 <SecondsBeforeRetry>900</SecondsBeforeRetry>
 <Configuration>
 <DocumentLibraryConfiguration>
 <ExcludedRenderFormats>
 <RenderingExtension>HTMLOWC</RenderingExtension>
 <RenderingExtension>NULL</RenderingExtension>
 <RenderingExtension>RGDI</RenderingExtension>
 </ExcludedRenderFormats>
 </DocumentLibraryConfiguration>
 </Configuration>
 </Extension>
 <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
 </Delivery>
 <DeliveryUI>
 <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
 <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
 <Configuration>
 <RSEmailDPConfiguration>
 <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
 </RSEmailDPConfiguration>
 </Configuration>
 </Extension>
 <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
 </DeliveryUI>
 <Render>
 <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
 <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
 <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
 <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
 <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
 <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
 <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
 <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
 <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
 <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
 <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
 <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
 </Render>
 <Data>
 <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
 <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
 <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
 <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
 </Data>
 <SemanticQuery>
 <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
 <Configuration>
 <EnableMathOpCasting>False</EnableMathOpCasting>
 </Configuration>
 </Extension>
 <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
 <Configuration>
 <EnableMathOpCasting>False</EnableMathOpCasting>
 </Configuration>
 </Extension>
 <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
 <Configuration>
 <EnableMathOpCasting>False</EnableMathOpCasting>
 </Configuration>
 </Extension>
 <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
 <Configuration>
 <EnableMathOpCasting>True</EnableMathOpCasting>
 <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
 <EnableUnistr>False</EnableUnistr>
 <DisableTSTruncation>False</DisableTSTruncation>
 </Configuration>
 </Extension>
 <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
 <Configuration>
 <EnableMathOpCasting>True</EnableMathOpCasting>
 <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
 </Configuration>
 </Extension>
 <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
 </SemanticQuery>
 <ModelGeneration>
 <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
 <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
 <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
 <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
 <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
 </ModelGeneration>
 <Security>
 <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
 </Security>
 <Authentication>
 <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
 </Authentication>
 <EventProcessing>
 <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
 <Event>
 <Type>ReportHistorySnapshotCreated</Type>
 </Event>
 </Extension>
 <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
 <Event>
 <Type>TimedSubscription</Type>
 </Event>
 </Extension>
 <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
 <Event>
 <Type>RefreshCache</Type>
 </Event>
 </Extension>
 <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
 <Event>
 <Type>SnapshotUpdated</Type>
 </Event>
 </Extension>
 </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
 <MaxConnections>2</MaxConnections>
 <Timeout>10</Timeout>
 <AppID>(Default)</AppID>
 <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

Sending to the internet redundancy..Is this possible

Can anyone tell me how I can accomplish redundancy in mail transport to the internet
Here is my setup
Site A is production and holds all mailboxes
Site B is our failover site
In both site A and site B we have an ex2010 server that sends to the internet via a sonicwall mail appliance. All mailboxes for the company are on the server in site A. I have the servers in both sites config'd with DAGS and when the DBs dismount in site A
the DAGS work as designed. However if the mail appliance goes down in site A all the emails Q up on site A ex2010. I need to configure somehow my ex2010 in site A to send email through the mail appliance in site B if the appliance goes down in site A.
Any help is greatly appreciated!!

There is nothing automatic unless you set both sonicwalls as smarthosts in a single send connector and then make the Site B sonicwall unavailable until its needed somehow. ( or not, maybe you are ok with messages going through the SiteB sonicwall anytime)
or
You could try the same thing with 2 send connectors with the same source servers, but whether Exchange correctly handles that when one of the sonicwalls is unavail is something you will need to test.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

Sender in the mail

Hi !
I have an requiremnet to add the sender of the mailer which is most likly hard core i. abc@*******in the Call Function
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
Please guide .
Regards
Sheetal

Hi !
Not able to understand the given solution ..m required to add sender in the mail from abap and currently using the Call Function :SO_NEW_DOCUMENT_SEND_API1
FORM MAIL USING ERRORCODE TYPE I.
Recipients
SELECT SINGLE PARAMVALUE
FROM ZIBHR_PARAMS
INTO LV_MAIL1
WHERE PARAMCODE EQ 'MAIL_ID_EXCP_1'.
SELECT SINGLE PARAMVALUE
FROM ZIBHR_PARAMS
INTO LV_MAIL2
WHERE PARAMCODE EQ 'MAIL_ID_EXCP_2'.
IF LV_MAIL1 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = LV_MAIL1.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF LV_MAIL2 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = LV_MAIL2.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF LV_MAIL1 NE '' AND LV_MAIL2 NE ''.
lt_mailrecipients-rec_type = 'U'.
lt_mailrecipients-receiver = at .....com.
APPEND lt_mailrecipients .
CLEAR lt_mailrecipients .
ENDIF.
IF ERRORCODE = '1'.
Subject.
lt_mailsubject-obj_name = 'TEST'.
lt_mailsubject-obj_langu = sy-langu.
lt_mailsubject-obj_descr = 'Biometric INET Time Correction Upload Program Exception <001>'.
lt_mailtxt = 'Biometric INET Time Correction Upload Program. Missing parameters in ZIBHR_PARAMS table Please contact SAP IT HR Team for further action'.
APPEND lt_mailtxt.
ELSEIF ERRORCODE = '2'.
lt_mailsubject-obj_name = 'TEST'.
lt_mailsubject-obj_langu = sy-langu.
lt_mailsubject-obj_descr = 'Biometric INET Time Correction Program Exception <002>'.
lt_mailtxt = 'Biometric INET Time Correction Upload Program. Program did not find any file to upload in the directory.'.
APPEND lt_mailtxt.
ENDIF.
Mail Contents
IF t_error_ind EQ 'Y'.
lt_mailtxt = 'Please note that some errors have been encountered while loading the records. Please check error log for further details'.
APPEND lt_mailtxt.
ENDIF.
Send Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
 document_data = lt_mailsubject
TABLES
 object_content = lt_mailtxt
 receivers = lt_mailrecipients
EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
refresh lt_mailtxt.
ENDFORM. "MAIL
Edited by: sheetal Gulati on Mar 8, 2010 5:22 AM

Always send AS the initial recipient.

Before I start and/or you start reading let me disclaimer this entire post.
"I understand best practices of Exchange and of Outlook client - If a client asks you for a specific thing that "always worked before" then you would also try to get a solid answer. OK That being said here goes the question.
I have a client that was in business with online media about 4 years ago. He had a vast infrastructure, around 60 employees and over 50 off-site servers for various tasks. After the collapse of the economy he lost everything.
When I met him he had a single desktop running XP Pro. That machine had crashed trapping all of his Email. I rebuilt the machine as a VM and mounted it with Acronis. I used a tool I built to scan the entire PC for .PST files and export to a central location
on a NAS I had. Come to find out there was 17 POP (Netsol) email addresses in that outlook 2003.
He is the only employee now and wants to send AS (not on behalf of) all of these 17 email addresses. I told him, no problem just change the From: field in outlook to send AS the address you want.
****He told me that he never had to do this before, that when he got an email he just hit reply and it would go out as the person that was the original recipient. ****
I moved him to Office 365 and began importing all the old mail into a single profile. After a few days of sync time I asked him to check the email and see if all of it was there. Sure enough it was missing 2010 - 2011 and skipped right to 2012 -2013
with some (about 400 messages) being from 2008 - 2009.
I told him after lots of probing that he would need to get an account for every mailbox he wanted to send from. He agreed to this again stating the above that he never had to type in an address to send as before.
So here is the problem base:
He has the following folder structure in Outlook 2010 currently and it works.. sorta.
1. Domain 1
a. [email protected]
b. [email protected]
[email protected]
2. Domain 2
a. [email protected]
b. [email protected]
and so forth and so on for 17 email address.
I have created SendAs perms with PowerShell and forwarders for all accounts to the others both ways. i.e. Address(@)Mailaccount1.com can send as Domain 2 and so forth across the board.
Last night he asked me to add a new address, so he could send AS and I opened outlook to find only 10 addresses on the From drop down.
I REALLY need to figure out how to make it like it used to be for him. Get a mail to address one while the profile is address 2 and send AS address 1 always without having to choose the address.
I am curious, is there a way to parse the original message recipient using a connector in exchange so no matter what email address he sends from it will ALWAYS reply as the original recipient?
Thanks, sorry its so confusing.
Josh

Hi,
Is there any further question on this thread?
Thanks,
Simon
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
No I got it figured out.
The functionality was removed in Outlook2013 to change delivery locations. Oh well.

Can Anybody Send Me The Latest Testking Pdf Of 1z0-033 (Performance Tuning

Hello,
Can Anybody Send Me The Latest Testking Pdf Of 1z0-033 (Performance Tuning
my email address is asiforacle [email protected]
Regards,
Asif Iqbal
Software Engineer. ( Karachi, Pakistan ).

The answer is surely NO but what I would like to ask for the sake of curiosity , why did you ask about Performance Tuning questions over Sql /Plsql forum , not on Database General Forum? Not that you should go there now and ask, just curious.
Tell you what, read the free book(yup free). Here it is,
http://download.oracle.com/docs/cd/B10501_01/server.920/a96533.pdf
You won't need anything else to read, not even that testking stuff too.
HTH
Aman....

Hi ,send me the test programms over the benefits

Similar Messages

Maybe you are looking for